Photoshop Elements 10 won't start

I wanted to add some new photos to my Elements 10 catalogue earlier and get a couple of error messages.
The first is that "Windows requires a reboot to return the system to it's original state". However, rebooting does not seem to make any changes.
If I ignore and close that message, I then get a 2nd message from Elements 10 itself stating:- "DirectX could not be initialized. Please be sure that it is installed on your system".
I made sure that the latest version is downloaded and installed, but Elements Organizer still won't initialise.
Any advice and help would be appreciated.
Rob

I am - yes. Sorry, forgot to add that to the original post.

Similar Messages

  • I have a used iMac, HD wiped, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements won't start saying "could not complete because of missing or invalid personalization info." previous owner's name still there preventing initialing?

    I have a used iMac, HD wiped clean, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements was installed but won't start saying "could not complete because of missing or invalid personalization info." is previous owner's name somehow still there preventing initialing?  How do I remove and install my own?  I don't understand as HD was completely wiped with no OS when I got it.

    I think Adobe allows their software to be installed on 2 computers only. However, if say you buy another computer and wish to install PSE on the new computer ( effectively a 3rd computer as far as Adobe is concerned ) PSE needs to be properly uninstalled ie not simply by uninstalling using the operating system's uninstall process. It needs to be uninstalled using the Adobe uninstall process that is contained within the software.
    You should then be given a prompt as to whether you will be reinstalling on the same computer or if you wish to remove altogether. If the latter, then all traces are removed and the software can be (re) installed on the new computer.
    If, unknown to yourself, the software had been installed on 2 computers and although you or the previous may have wiped the hard drive clean, as far as Adobe is concerned the software is still ' registered / assigned ' to 2 computers.
    If the previous owner bought a new computer and installed their PSE on it, wiped the hard drive clean without properly uninstalling/removing PSE thentherein probably lies the prblem.
    As Allan Jones said, it 's probably worth your while to purchase your own copy.
    Hope this helps.

  • Photoshop Elements won't start, closes, says no serial #

    I had to get a new computer, mother board died. Old hard drive installed as d drive and all programs work fine except Photoshop Elements.
    looks like it will start, asks me to agree to user agreement, I click agree and it says I did not and will shut down and also says my name and serial # can't be found or aren't valid or something and shuts down.
    Chat won't help me but when I searched for help this topic is touched on and clearly states you can not fix yourself.
    I am really stuck. I hope someone here can help me.
    Lori

    try uninstalling, cleaning (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then installing.

  • Photoshop elements won´t start

    Hallo Adobe Photoshop elements 12 won´t start. The editor does not start, the organizer has no problmes. I have reinstall the programm (sorry is english is not so good) because i had installed new hardware. (Mainboard, CPU, RAM). After restarting the systems the programm worked fine. After some days elements was only in trial-mode. First I irgnired it but then i deinstalled it an  reinstalled it on a new ssd. Installing and entering the CD-Key was no problem. Organizer launched without any problems but the photoeditor does not start. Log-Files are okay, no errors while install-progress. I did everything, reinstalling, using ccleaner and i tried to delete manuelly everything with "photshop elements" in the regestry (with new installation after that....).
    Running the setup und the exe as admin did´nt help.
    has anybody a solution for me or  a direkt link to contact adobe?

    try uninstalling, cleaning (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then installing.

  • Photoshop Elements won't start (Win XP)

    Some one tell me why i should not throw this program in the trash

    Please try couple of probable solutions as mentioned below if restart does not fixes the problem.
    Solution 1:      1. Close Elements.  Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.     Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    3: Try launching with Admin account
    4: Try launching with anti-virus off or removing PSE from conflicting list.
    5: Try launching PSE Editor directly from .exe (win) or Editor app file (mac)
    6: Check once in task manager (WIN) or Activity monitor (Mac) to make sure that the Photoshop Elements Editor is not already running. If yes then kill the process and try re-launching.
    7: Make sure you have space available on your hard drive. For specification review here http://www.adobe.com/products/photoshop-elements/tech-specs.html   Solution
    8: Re-installing with admin account.
    Hope you get it working.

  • Photoshop Elements won't access my HP printer

    When I click on Print, my HP Fax software is opened even though the printer is selected.  I reinstalled my printer software and still no luck.   The printer software is the default.   I see that others have had this problem but I haven't seen any suggested solutions for this.

    Thanks, that did the trick.
    Date: Mon, 4 Jun 2012 16:46:37 -0600
    From: [email protected]
    To: [email protected]
    Subject: Photoshop Elements won't access my HP printer
        Re: Photoshop Elements won't access my HP printer
        created by photodrawken in Photoshop Elements - View the full discussion
    This solution has been mentioned several times: The names of the printer and fax are too long.  In Windows, open the properties of each device and rename them to something like "HP Printer" and "HP Fax". Ken
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4465050#4465050
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4465050#4465050. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • Error message Photoshop CS6 won't start in Windows 7

    I am unable to start Photoshop in Windows 7 (64 bit Home Premium). I gegt an error message saying Photoshop CS6 won't start and telling me to close the program. Is this a common problem and is there a solution? I have tried opening the program in safe mode and tried a clean boot all without success.

    Jeremyjk please be aware you are posting in a public forum.  Kglad was kind enough to remove your serial number but please be aware that any information posted is publicly available.
    In addition the screen shots you attempted to post are not visible.  You will need to make sure to choose the option to the View the full discussion within your e-mail notification.  You can find more details on how to post a screen shot at FAQ: How do I capture and post a screen shot or video?.

  • HDD crash Photoshop CS6 won't start - scratch disk error

    The disk I used for the Photoshop scratch files crashed.  Now Photoshop CS6 won't start.

    Press and hold Ctrl+Alt or Cmd+Opt, start Photoshop and select a different disk.
    Benjamin

  • Photoshop Elements won't open. I have tried re-installing. I have windows pro 7

    Photoshop Elements won't open. I have tried re-installing. I have windows pro 7

     
    Try making a direct desktop icon for the Editor and see if you can launch the program directly from the desktop.
    Right click anywhere on the desktop and select New à Shortcut
    Browse to Computer OS C:
    And find the PSE Editor application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
    C: à Program Files à Adobe à Photoshop Elements 9
    Within the Photoshop elements 9 folder find PhotoshopElementsEditor.exe (with the blue icon)
    Select that file and click Next.
    Then click Finish.
    You should now be able to launch by double clicking on the new desktop icon, bypassing the welcome screen.

  • When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

    When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

    When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

  • Cannot find photoshop elements 8 to start download. what next

    cannot find photoshop elements 8 to start download. what next
    my serial says it does;t work with Version 9… so it must be for version 8, which I cannot locate to download.
    what do I do now ????

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 8: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    As far as version 9 goes, if you never purchased it you shouldn't expect to be able to use it.  If you check your Adobe account online you might be able to find whatever version you purchased identified there.

  • Photoshop Elements Help | Getting started tutorials

    This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/topics/getting-started-tutorials.html

    Do you mean photo mkail or attachments? I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • Photoshop Elements won't open

    I've been using this computer in my workshop for simple things, mostly email, fb, etc. It has had Photoshop CS (very old, not sure what version) and Photoshop Elements 2.0 on it and both have been working fine. Just brought it into the house to use in the office after my slightly newer, but still old, iMac G5 died. I'm hoping to use it for a short time while figuring out what to do next regarding a newer computer. I've gotten it connected to printer and scanner with a bit of trouble due to trying to find old drivers again. That's really all I'm aware of having changed. Now suddenly PE and P CS won't open. I reinstalled PE (which is what I use most); no change. It starts to open, then just quits. I've clicked on "report" and see the following:
    Date/Time:      2012-04-11 00:02:41.529 -0400
    OS Version:     10.4.11 (Build 8S165)
    Report Version: 4
    Command: Photoshop Elements 2.0
    Path:    /Applications/Adobe Photoshop Elements 2/Photoshop Elements 2.0/Contents/MacOS/Photoshop Elements 2.0
    Parent:  WindowServer [66]
    Version: 2.0 (2.0)
    PID:    246
    Thread: 0
    Exception:  EXC_BAD_ACCESS (0x0001)
    Codes:      KERN_INVALID_ADDRESS (0x0001) at 0x6f726b2e
    Of course there's lots more but that's the part with the bad words like "bad access" and "invalid address" and such. I'm hoping someone can tell me what is going on; perhaps you know what the above means? Or maybe there is some other clue here? I'd be grateful. Thanks for reading.
    Judy
    PS Just to be clear, no major changes in software; I have been running both Photoshop programs on this computer, with OS 10.4.11, since getting the computer as a hand-me-down a couple of months ago. I did update OS, Safari, and a few other things at that time, as well as maxing the memory, deleting many programs and files I'll never use, etc. Installed PE 2.0 at that time. CS was already on it. Both have worked just fine. When I reinstalled PE the installer said it had installed properly.

    Well, just in case someone else checks in here with the same problem. Got both programs working just fine again. I hunted up other threads on the same topic; several had posts suggesting trashing certain plug-ins and/or prefs. I'd tell you exactly what but I did a bunch and not sure which solved it. With Photoshop CS 8.0, I deleted plist in user library; no change; then deleted twain plug-in, now it opens just fine. I don't exactly comprehend why, but so far so good. If I have any other useful observations I will post them.
    Judy
    PS I ordered a PRAM battery and will replace that anyway, just because I'm certain it is quite old; perhaps this will prevent other problems popping up. I need to get a bit more use out of this nice old machine!

  • Photoshop Elements 12 not starting

    I recently bought a copy of Photoshop Elements 12, but it just won't start. Sometimes the splaschreen is loaded, but the editor won't launch.
    I'm running Windows 7.
    Can you please advise?

    Hi Brian,
    Thank you for the advice, I will keep that in mind.
    If I succeed, I will let you know.
    I am living in The Netherlands.
    Ineke
    Verstuurd vanaf mijn iPad
    Op 25 jun. 2014 om 19:29 heeft "Little_Pale_Face" <[email protected]> het volgende geschreven:
    I just bought Photoshop elements 12, installation was no problem, starting organizer is no problem, but editor will not start up. What do I do wrong ?
    created by Little_Pale_Face in Photoshop Elements - View the full discussion
    Hi,
    I meant create a new user account on your laptop. There are some settings that are stored on a per user basis so creating a new user may clear a setting.
    However, that may not help in your case - I have been trying to help someone else and got your two problems mixed up.
    The only reason that I had the editor fail before was resolved by running the disk cleanup and check tools.
    As you have returned the product, you could try installing the trial version. If you get it to work, then you may be able to buy a boxed version from Amazon or similar. I'm not sure where you are but the boxed version can often be on special offer from the big stores at a cheaper price.
    Brian
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6496317#6496317
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photoshop elements won't switch to the editor workspace from the organizer.

    I can't edit more than one photograph per session when using Photoshop Elements 10.
    When I first open up the organizer, I can select a photograph for editing and send it to the editing workspace.
    However, when I try to edit a second photograph in the session, the editing workspace won't load.  Even if I try closing Photoshop Elements altogether and reopening it, the editing workspace still won't load. 
    The only way to get the editing workspace to load again is to shut down my computer completely.
    This has only started recently, and I am unaware of doing anything to cause this problem.
    Has anybody come across this problem and how did they solve it?

    Try making a direct shortcut for the Organizer and Editor. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
    On Windows, Right click anywhere on the desktop and select New >> Shortcut
    Then click the browse button and navigate to:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    Then click Next; then click Finish
    To launch, try right-clicking on the new desktop icons and choose “Run As Administrator” which often improves stability.
    Then make a direct shortcut for the Editor in a similar manner.
    On Windows, Right click anywhere on the desktop and select New >> Shortcut
    Then click the browse button and navigate to:
    "C:\Program Files(x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    Then click Next; then click Finish
    N.B. navigate to Program Files on 32 bit systems.

Maybe you are looking for

  • Safari pages not loading properly and certain pages don't even load

    Recently, I've been struggling with a lot of certificate warnings and some incomplete loadings from Safari. I don't know why but my mac is constantly asking me to verify certificates even though i've allowed them all for my most frequently visited si

  • Create a DNG file that does not show changes when viewed by others

    I am adjusting my RAW Images in Adobe Lightroom and want to export them as DNG without betraying the evidence of my post production efforts- is there a way to save an altered file as a DNG without showing the client which changes I have made when the

  • Coming up in pivot but not in chart

    hi everyone , i am having one view selctr as taking two cols which is number and the other is %.... when am selecting number it reflects to both pivot and chart below in the report but when i am selecting %(second col) in view selectr, reflects only

  • Execute a method before a page is displayed?

    I love JSF, but I have continuously run in to a wall trying to figure out how to execute code before a page is displayed. Is there some Listener/Binding mechanism that I could tap into that would be called before Render Response? A Phase Listener is

  • Photoshop Elements 13 won't download on 8.1

    Tried both ways and turned off my malwarebytes and same error message that the 1st tier download faild.