Photoshop elements 11 as external editor for iPhoto

I have set up Photoshop Elements 11 as external editor for iPhoto on my iMac. I believe if set up correctly the edited photo should never leave iPhoto. When saving the edited version it should automatically appear in iPhoto. This is not happening. When either closing the edit window or choosing: <file : save> another dialogue box appears asking where to save the picture. Can someone please help me to set up Photo shop Elements so that the photo stays in iPhoto?
[moved to PSE forum]

Go to Photoshop Elements Editor >> Preferences >> Saving Files
Choose:
On first save: Save Over Current File
Click OK

Similar Messages

Have set Elements 12 as external editor for iPhoto =, but pictures identified for editing don't appear in Elements

Have just installed Elements 12 and nominated it as the external editor for iPhoto. When I identify a pic for edit in iPhoto and direct it to Elements it doesn't appear in Elements.
Help please

Usually that means you selected the logical file as your external editor instead of the correct one. The actual PSE editor is buried inside the Support Files folder:

When using Photoshop Elements 9 as external editor my iPhoto version does not update

I am using Photoshop Elements 9 as an external editor in iPhoto V9.4.2
My photo's are Raw and they open in Elements fine for me to edit. When I go to save or exit I have problems. I get options to choose from - I am assuming that saving them as JPEG now they are edited is the best choice. However it shows me a file location where it will be saved and this is not the iPhoto libary. Even so, I save them where PSE wants to and when I go back to them in iPhoto they are not shown as edited (either in preview thumbnail or full version and regardless of which folder I look at them from). I shut iPhoto down and re-open and still they are not changed. I have watched the Adobe lesson on this and it is identical right up to the point of 'saving'. I have read other question on this and followed some advice but not getting the desired result of showing up in iPhoto still.
Thank you.

Are you using PSE and saving the edit as described below?
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Using photoshop elements 12 as external editor for lightroom 5

When I have been in lightroom....then used elements as external editor....the photo does not save back to light room...how do you do that?
thanks

This issue has been reported numerous times in the last few months on this forum and the elements forum. Surprisingly the solution for some has been to save the file in PSE with the "save as" command instead of the "save" command. I know, this is the opposite of what "they" say but after seeing that solution in the forum several months ago I started following this rec and have not had a problem since, when before I too was having problems with the edits in PSE being saved back to LR 5.3. I don't know whether this is a bug in LR or PSE but there have been enough reports that it clearly is an issue. Adobe, however, is strangely silent on this. Imagine that! Anyway, give that a try and see if that works. Can't hurt.

Using Photoshop Elements as External Editor for iPhoto

I have set up iPhoto so that I can use Photoshop Elements as the external editor. When I select a photo and choose 'External Editor,' Elements comes up but my photo is not displayed.

Hi Toomuchtrouble000,
When you are making the settings from iPhoto, make sure you select Photoshop Elements Editor, which is present in Support Files, not Photoshop Elements 11, which is actually the Welcome Screen.
Please change that setting.
Hope this helps.

How do I get imovie to use Photoshop Elements 12 as external editor?

How do I get imovie to use Photoshop Elements 12 as external editor? I am making a movie slide show with music from my Caribbean vacation photos and adding text captions to photos in PS Elements 12. I can also add some effects to photos like edge blur although I like iphotos effects better but iphoto doesn't seem to do text. The finished PS Elements photo doesn't seem to want to be shared by iphoto which is what imovie uses...
I am still learning to use PS Elements 12 for Mac (had PSE 7 for WinVista but wasn't proficient) and Mac and it's programs are new to me. I switch between my old Dell which is still amped for graphics and the new Mac mini. I started to use Movie Maker to do my vacation project but read that imovie was better but so far it doesn't seem to have as broad of file useage when it comes to imovie and photo files.
Hmmmmm??? What to do?

You simply need to create your stills with Photoshop Elements, save them in a suitable format (.jpg, .png, .tiff are all acceptable) then drag and drop them into your iMovie timeline. You don't have to use iPhoto.
Geoff.

Using Photoshop elements 6 as external editor in aperture

I am new to aperture2, have imported photos into the aperture library, from a folder on the harddrive. I have set photoshop elements as the external editor. When i select a photo for external editing i get redirected to elements, do the editing, but when i close and save the edited picture and go back to aperture, i have two of the same pictures in aperture one with two circles in the bottom left corner, one with a square with arrows in, but not the edited version. Checking in finder, the edited picture is in the folder where I imported the photos from. Am a missing a basic setting?

That sounds very strange. You should have the referenced icon in the lower right corner on the edited version as well.
Just thinking; are you using Aperture 1.x by any chance? In the previous version of Aperture the edited image was stored inside the library file, and in version 2.x the edited image is stored together with the original referenced master.
You could try to rebuild your library by holding down the "CMD + OPT"- keys when starting Aperture. Choose from the dialog.
Regards
Paul K

Using photoshop elements 12 as external editor in Aperture 3.5.1

I have been using photoshop elements 12 as external editor to resize some photos and add some refinements not available in aperture....
It look like the file I send to PE becomes HUGE but is not marked as a separate version.....there is a little mark in lower right corner..
Is this correct?normal?
It is a problem, because I am also trying to use focus stacking software and it won't stack files with huge size differences...
thanks
sailmom

oh wow!
I started with a .orf (olympus omd em1) RAW file 13.73 MB...
I just right clicked to edit in photoshop elements...
so the one beside it...is 40.51.....it does not say new version but it has the "dot" on lower right.....
so I don't understand all the intricacies of this...but I am guessing sending a file out of Aperture gets a huge file in return.....
thanks!
sailmom

Adobe Photoshop Elements 12 as external editor

For years, I've used iPhoto. And although I usually edit in iPhoto, sometimes I edit in an external editor, Adobe Photoshop Elements. It's always been easy - rightclick, "edit in external editor", Photoshop Elements opens and the photo is loaded automatically.
Well, since I upgraded to Adobe Photoshop Elements 12 (PSE12), when I choose to edit in an external editor, PSE12 opens but my photo doesn't load.
Not a huge deal, but it takes extra time and searching and is, honestly, a little annoying.
Any suggestions?
Thanks!

Other than the previous versions of Elements, Adobe Photoshop Elements 12 installs the editor directly at the top-level of the Applications folder, so there are no longer any nested folders to select the editor application from.
But there is a weird glitch, when I try to use it as an external editor in iPhoto.
When I select a photo in iPhoto 9.5.1 and ctrl-click it and use the command "Edit in External Editor" from that panel, Adobe Photoshop Elements 12 opens with an empty window, like you reported.
This does not work: Elements launches on an empty window.
But when I use the "Edit" button in the footer of the iPhoto window and double click it, Adobe Photoshop Elements 12 will open with the photo in the Editor window.
This does work:
So, for the time being, use the Edit button to launch your external editor, if you are also using iPhoto 9.5.1 with Mavericks 10.9.4.

PSE6 as external editor for iphoto

I've trawled the forum but can't find a solution, perhaps somebody can help? I have just installed PSE6. Having set PSE6 as the default external editor in iPhoto, when I click edit in iPhoto the PSE6 app opens and I can start playing with the image no problem. However, if when in PSE6 I select File>Open and try to select an image from iPhoto the OPEN button remains grayed out.
Enable: All readable documents & Format: JPEG are selected. Clicking on an image brings up the file size beside the Format:JPEG drop menu indicating that it knows which file I am selecting but still the OPEN button remains grayed out. I also tried the Create Montage function. A new project is created and the idea is you click on an empty space within the project and it takes you to iPhoto to select an image. Again as soon as iPhoto opens the OPEN button is grayed out.
I've read on other forums people experiencing similar issues but as yet I've not read about a solution. It's very frustrating because I chose PSE6 on the basis that it works seamlessly with iPhoto. Does anybody have any ideas or can you direct me to a thread that addresses this issue? Thanks in advance.

Welcome to the Apple Discussions.
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Can I use PSE 10 as an external editor for iPhoto?

I just downloaded a trailversion of PSE10. Than I selected it as external editor in iPhoto.
As I clicked on a Photo in iPhoto and selected "edit in external editor" PSE10 started, but the photo did not appeared as it is used in PSE8 for example.
Thanks
Nasenhorn

Make sure you selected the application and not the shortcut:

Aperture as external editor for iPhoto problem

When I set Aperture as external editor in iPhoto, Aperture opens as it should , but the photo to be edited does not appear in the Viewer pane. I have to import it manually. This is not the way it should behave, is it?

As Ian says, it can't be used in this way. To elaborate: Aperture is a Database and cannot see or manipulate photos that have not been imported into the db. Just like iPhoto, in fact.
Regards
TD

Photoshop Elements12 as external editor for iPhoto

How do I get IPhoto to use Photoshop Elements12 as external editor, when I can not select "Application" under the advance setting, as suggested. It shows PSE12, but the photo's do not open up in that application. The application opens, with no photo. What needs to be changed, and how do I do it?

Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note 1: screenshots are from PSE 10
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Can anyone offer help using CS4 as external editor for iPhoto '08?

I am very new to CS4 Extended, having upgraded from Elements 6 recently. I use iPhoto '08 to do all my photo organization and really enjoy it, have a LOT of work invested in it and don't really want to switch to anything else if I can help it. One aspect I like about it is that it tucks away my original in case I ever need to revert. With Elements, I could set my iPhoto preferences to allow all my editing to be done externally using Elements 6, but it would only allow 4 photos to be sent over to Elements at a time. Then I would have to go back to iPhoto and "get" more. I thought that when I upgraded to CS4, I would at least be allowed four at a time to be sent from iPhoto to Photoshop for editing. Whenever I do this, it sends 1 or 2, possibly 3, but never four. There doesn't seem to be any rhyme or reason to it. I'm annoyed at having to constantly go back for one or two photos at a time to edit and wondered if anyone knew of a workaround for this problem. The reason I have done it this way all along is that the two programs would work together and update my iPhoto pics and thumbnails automatically. Since then, I have just opened the iPhoto files from within CS4, but the edit doesn't update the thumbnails, only the enlarged versions within iPhoto. Neither Apple nor Adobe has been able to offer any solutions. I am not looking to create multiple copies of my files. I download straight from my camera to iPhoto. I could always just download them to a folder, edit them in CS4 and then import them into iPhoto, but that would necessitate making a copy of the photos to keep the originals safe and I'm not sure I want to have to organize all my originals elsewhere on top of my iPhoto library. I am very open to suggestions!
Thanks!

You should ask at the Apple forums. very few if any actually use iPhoto here. Most use Aperture, Lightroom, and/or Bridge.

Using Aperture as external editor for iPhoto

Hi all,
I could be classed as a "keen amatuer" I suppose. I import all my photos into iPhoto, and use it to publish photos to the web for family / friends.
I then import the "best" photos into Aperture so I can work my "magic".
I've recently returned from a very sunny Italy and I want to use Aperture's shadows / highlight editing to enhance a few pictures, then band these up onto the web using I photo.
I've set Aperture as my default editor in iPhoto, and when I double-click Aperture does open, but the photo I want to edit does not.
Is it possible to use Aperture in this way? If not, what are the best options for moving photos in and out of both of these apps? Also, I've not used Aperture's web publishing facilities. Are these as good (read "easy") as iPhoto?
I don't really want to make the move over to Aperture and completely remove iPhoto because the family know and like iPhoto to browse things.
Cheers for the help.
Stuart

Once your Aperture photos are in iPhoto, they are shared just like any others in iPhoto.
If you're willing to make the switch, then once you switch over to Aperture (moving over all or some of your photos), delete and re-add them to iPhoto. Then you should see any Aperture made photos. Be sure they're added and copied over so when you delete from iPhoto, you're not deleting your only copy.

Photoshop elements 11 as external editor for iPhoto

Similar Messages

Maybe you are looking for