Photoshop Elements 11 Disc won't mount on Mac

Photoshop Elements 11 disc wont mount. Spins a few times then ejects. This is my second disc. Other discs work fine in the drive? I can install a downloaded trial version which works ok. Can I simply apply my purchase code from my disc to the trial version?

Yes. Your serial number will make the trial into a full version.

Similar Messages

External disc won't mount in Leopard, but will in Snow Leopard

I have a 5-yr-old G5 networked to a new iMac. I have had a 1-TB external HD attached via Firewire 400 to the G5 for about a year. Yesterday it didn't show up on the G5 desktop. I went to this forum, searched under "disc won't mount", got some ideas, ran DiskWarrior and Disk Utility...but nothing worked. They all said the disc was fine, directories rebuilt, etc., but it wouldn't mount. This AM it occurred to me that I had the correct cable, so I tried plugging it into the iMac instead. It worked. The data is safe, the disc shows up, everything seems to be OK, but it won't mount to the G5. Why would that happen, and how can I mount it to the G5? And how likely is the disc to remain accessible?

May I hop onto your thread as I have a similar problem.
I have a 5 year old G5 PMac with 10.5 onto which I have daisy chained two UltraMax 1TB firewire 800 drives. For the last 5 years I have been able, even with out sharing enabled, to connect to the G5 from a G4 Graphite with 10.4, a G4 Powerbook with 10.5 and now a MbP with 10.6.
After completing the login dialogue in the past from any other mac it would give me a list of the G5, it's Hard disk, user directories and the two Firewire Drives. On selecting them the drive would mount onto the desktop as a network drive. This went well until monday when it became temperamental in the morning and after a few restarts and one successful mount it has not shown up since. If I come to the G5 via the Go > Connect to Server I get a dialogue "Could Not connect to the server because the name or password are incorrect". If I try to connect via the network icon in the side window of the finder window I get a network dialogue log in, I get a list of folders and drives but then when selecting the FH drive get an error message which relates to the alias to the G5 Server requiring deleting or fixing.
Originally it just connected without any messing but now unless i make the firewire drive a shared drive the process on the other macs cannot see the firewire drive. NOTE - After having made the internal boot HD of the G5 shared, I can now see and mount this drive from the other macs but not the external drive.
This is causing me to pull my hair out, I have run disk utility, powered down unconnected and reconnected everything .The HD's appear to be working ok from the G5.
I urgently need to connect the FW drive to my G4 to do some work but it also needs to be connected to the G5, has anyone got a clue why I cant get G4 (or any other mac) to mount G5's external FW drive

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place I can download the Install files from?

Pagemaker is ancient, obsolete and unsupported. It was discontinued over 10 years ago. (Though why it is still sold is a mystery.)
If you want to run PageMaker, your best bet is to use a Win2K or WinXP PC.
Otherwise move to Indesign or look at Serif's PagePlus or Scribus.

Photoshop elements 11 albums won't sync

Photoshop Elements 11 albums won't sync with ipad using iTunes.
I was using PE10 and synced my albums using iTunes to my iPad 3 iOS 6.0 and 5.1 just fine. (itunes 10.7.0.21) I upgraded to PE11 and it goes into perpetual sync when albums are selected. I deleted some albums and added test albums in PE11 and those changes are not reflected in iTunes.
I worked with Apple Care for about 2 hours uninstalling all of the Apple software (iTunes, etc) and reinstalling. That did not fix it. Apple declared it an Adobe problem and suggested I call them.
I worked with Adobe about 45 minutes before they declared it an iTunes problem.
Any ideas out there?

I solved the mystery. It had to do with the file metadata in the Photoshop Elements catalog. When I moved the catalog (pictures) from my old machine to the new machine, the path (folder location) of the images changed. So, although the catalog had cached thumbnails of the photos to display in Photoshop Elements (which tricked me into thinking that the path to the images was correct), the paths were actually wrong. All I had to do was “reconnect” the missing images (a feature in Photoshop Elements which corrects missing/wrong paths to images) and now everything works correctly (sync in iTunes).

Cannot load photoshop elements 10 disc 2

the serial number on the disc box Photoshop elements 10 worked for disc 1 but is not accepted by disc 2.

We purchased Adobe photoshop Elements 10. It has 3 discs. All are
labelled 'Adobe photoshop Elements 10' disc 1 of 3, 2 of 3 and 3 of 3. At
the end of loading disc 1 it told me to load disc 2. No discs are labelled
as "premiere". Disc 2 instructs "start with disc 1".
We do not understand.
Would Adobe package 3 discs in the box, label them "elements 10"?

Install photoshop elements 7 disc

My windows 7 will not install my photoshop elements 7 disc when I insert it.
I tried double clicking the DVD rom drive but it just ejects the disc.
Can anyone help please.I am a computer novice.

I am glad that it worked for you. Happy Editing.
By the way, could you please mark the thread as "Answered" so that other users can peek into it for future reference and this will also help me in preventing myself in visiting this thread again and again...
Right now it is marked as "Poosibly Answered" which just means that some other user replied, only creator of the thread can mark is as answered.
Thanks
Best Regards,
Ankush

TS1545 I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbo

I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.

You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

Have a look here:
https://www.google.com/search?q=%22You+can%27t+open+the+application+Photoshop+Elements+2.0 +because+PowerPC+applications+…

How do I transfer my photoshop elements 11 from my pc to my mac?

How do I transfer my Photoshop Elements 11 from my pc to my mac? If I try to download it off the website, it wants my to download Photoshop Elements 12 which doesn't recognize my seriel number. I don't want to buy Photoshop Elements 12. I want to use my Photoshope Elements 11.

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial number.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

My Photoshop Elements 11 has stopped working on my mac. bought via download - how to reinstall?

My photoshop Elements 11 has stopped working on my mac. I bought it via download in December 2012 - how do I get this to reinstall? There doesn't seem to be a place to do this on MyAdobe......

JJWilna where did you purchase Photoshop Elements 11 from? If you purchased the software from Adobe then please see http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ for information on how to download your purchased software from our site.

How can I transfer my Adobe Photoshop Elements catalog from my pc to my mac?

What is the best way to move a Adobe Photoshop Elements catalog from a pc to a mac?

You do know the mac version of PSE has no Organizer?
You can use file>Write Tags and Properties to File(s) on your files in the organizer before sending them to your mac to write the tags into the file's metadata, which can be read by Bridge, iphoto, aperture, etc. on the mac. (It doesn't work for raw files and it doesn't always work, so do a couple of test files first.) You'll need to make tags for categories and albums, too, in order to be able to sort by those criteria again.

Need Photoshop Elements RAW plugin for Canon 70D using MAC

Need Photoshop Elements RAW plugin for Canon 70D using MAC - please advise where I can find it to download. Thanks.

To work with the Canon 70D, you will need Camera Raw version 8.2 or later:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
In order to work with this version of Camera Raw, you will need Photoshop Elements 12:
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
If you do not have Photoshop Elements 12, you can use the DNG converter to convert the CR2 files to DNG, which will then work in whatever version of Photoshop Elements you have:
Windows: https://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

I purchased Photoshop Elements for windows and need it on mac

I purchased Photoshop Elements for Windows and need it for Mac. Can I reverse this or is there a way to get the right product?

I don't know if things have changed (I get the feeling they have as of late), but normally an Elements license can be applied to either platform, so you should be able to download the trial version for the Mac and use the serial number to activate it. If you have any problem you should be able to resolve it with customer spport thru chat.

Computer won't read Adobe Photoshop Elements 10 disc!

Tried downloading Adobe Photoshop Elements 10 and the computer is saying its a blank dic. I tried the disc on 2 other computers that are older than mine and it works. Please Help!!!!!!

Does your optical drive have a DVD symbol on the front of it? It is possible that you might not have a DVD drive but only a CD drive.

Help please!Photoshop Elements 8 editor won't open any files (windows 7)

I have Photoshop elements 8 for my windows 7 laptop. I updated my laptop and now Photoshop won't open any files. I click on the psd/jpeg/png that i want to open(file,open) and nothing appears in the editor. even if i try by double clicking it the editor will show up but no file.i have tried restarting the laptop but it still wont work. I can't uninstall photoshop because it came pre-installed on my laptop and no disc or installer came with it. If anyone can please help me i'd be very gratefull.

Quit the editor, then restart it while holding down Ctrl+alt+shift. Keep those keys down till you see a window asking if you want to delete the settings file. You do.

Photoshop Elements 11 Disc won't mount on Mac

Similar Messages

Maybe you are looking for