Photoshop Elements 11 - how to print multiple images on a 4x6 print

Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11? Thanks!

You could also make a contact sheet with these settings (note the layout on the right side):
On a mac you can save this contact sheet and then just switch out the photos next time. (I did a horizontal layout but you could also do a vertical one by changing which number is where.)

Similar Messages

Photoshop Elements 8: Adjusting Location of Image on Paper Before Printing

I recently graduated from Photoshop Elements Version 3 to Version 8. On the Print Preview screen (Version 3) you can adjust the location of the image on the paper. First you un-select "Center Image". Then you either drag the image to its new location or enter in new Top and Left position coordinates.
I have not been able to figure out how to move the image on Version 8.
Regards,
Glacier54

Well------way to go Adobe for "improving" a usefull tool right out of PSE. Now you have to jump through hoops to perform the same procedure that was simple to perform in earlier versions. (ie. now you must simplify a multi layered object before copying to a blank template to then adjust the objects print position on the paper. Like I said-----way to go Adobe.
This also would seem to make fine positioning of an object to print on label stock, for example, to be much more difficult.

How can I get photoshop elements to open my nef images?

How can I get photoshop elements to open my nef images?

The D3200 requires at least ACR 7.1, which isn't compatible with any version of PSE prior to PSE 11, so no, you can't do this directly in PSE 9.
You could upgrade PSE, use the Nikon software to convert the files and then open the resulting images into PSE for further editing, or download the free Adobe DNG converter to convert your NEFs to DNG files that your version of PSE can understand.

Printing Multiple images on one sheet of paper ( Printer Package)

I want to print multiple different images on one sheet of paper using PhotoShop 6 Printer Package, (operating system windows7 h/p) I have figured out how to get multiple images of the same image on one sheet, but not two different images.
I seen these instructions on the web and can do 1.2.3....4. has me lost. I think this may work for me, unless there is another method that is easier.
Important: Mac OS X users much first apply an update to Photoshop before attempting to customize the Picture Package layouts. Information and and a download link can be found at [url]http://www.adobe.com/support/downloads/[/url] (Thank you Matt Jones for this tip!)
Copy the next five lines and paste them into a text editor, like NotePad or SimpleText:
I 8 10
Letter (3) 4x6
0 0 6 4
0 4 4 6
4 4 4 6
Name this file FourBySixes.txt
Copy the file to your Adobe\Photoshop X.0\Presets\Layouts folder where X represents your version of Photoshop.
Open Photoshop and try it!
I copyed #3 and save to my documents, but I can't figure out how to do #4, or where the Adobe X.0\ Presets\Layout folder is at, if you could dumb this down for me I would be very grateful.
thanks

I can only guess that Photoshop 6 under Win7 would have the layouts under Program Files (x86)\Adobe\Photoshop 6\Presets or thereabouts. This is the Photoshop Elements forum, you may want to try the full Photoshop forum: http://forums.adobe.com/community/photoshop/photoshop_windows
Juergen

Printing multiple images on single page

Can anyone explain how to print multiple images on the same page such as 4-4x6 photos? Or the same image more than once on a page - similar to the N-up option in iPhoto? Anything new and helpfull for printing in 1.5? Thanks.

No, it isn't what we're looking for.
Let's take the example of a professional portrait photographer (me? ) trying to set up a home-lab with a wide format, roll printer.
I get an order for, say, 2 4x5 of image 1, 2 4x5 of image 2, 4 5x7 of image 3. I have 10" paper loaded in my roll.
What I would want to do is gang the prints onto 3 "units" - the 4 4x5 on one 8"x10" unit, and 2 5x7 on each 7"x10" unit.
Since my clients ordered specific sizes, I need to make sure I get the prints sized exactly right (contact sheet tool doesn't let me do this) and since printing is pricey, I want to make sure to waste as little paper/ink as possible. I also don't want to get stuck doing a lot of trimming.
So, in lightroom, photoshop, imagebuddy, portraits-n-prints etc, I would just ask the app to output the package for me. In Aperture, I'm stuck. I can't use the book tool because it uses a (moronically) fixed page-size. I can't use the contact sheet tool because it doesn't let me specify image size/aspect ratio. I can't use the "standard" print tool because it only prints one image per page.
This is a glaring omission, and a slap in the face to the professionals that Aperture claims to see as its target audience.

My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

I have Windows 7 x64 on a desktop PC. I have Photoshop Elements 13. I bought the Canon PRO-10 PRINTER on 2/3 and at first it worked fine. Then I tried to install it as a plug-in in Elements 13, and everything went bad. When I click on AUTOMATION TOOLS it does say "Canon Easy Photo Print Pro" like it should, but when I click on that I get an error message NO SUPPORTED PRINTER FOUND. CONNECT A PRINTER SUPPORTED BY THIS SOFTWARE AND THEN INSTALL A DRIVER. I also tried the FILE > PRINT command which also said there was no printer installed.
I reinstalled the Canon software and driver. Then I called Canon. I got a real live tech person who checked everything out and asked me to print from a different program. That worked fine and he said, the printer is fine. It's a problem with Adobe. Contact them. I uninstalled my Adobe Photoshop Elements 13 and reinstalled it. But the whole situation remains the same. I can't find how to contact a live technician for help so I'm appealing to ANYONE to help me with this. If you can 't help me with the printer problem, can you tell me how to reach a live tech support person at Adobe??
Message was edited by: Fran Cornelius
Made editing changes at 4:05 pm.

Hi,
After talking to 3 different Canon techs who didn't know anything about
this and told me it was Adobe's fault, a 4th Canon tech e-mailed me a list
of the Elements software that is "compatible" with the Canon Pro-10
printer. The list stops at Elements 12! In other words, Canon has not
written the software for their plug-in to work with Elements 13 yet. I
personally am stunned by this. Considering how popular Adobe Elements is,
you'd think Canon would be up-to-date on having their new printer's plug-in
work with Elements 13, which has been out there for some time.
Not only that, Canon's more expensive printer, the Canon PRO-100, also has
the same problem. My friend just bought one and told me the plug-in doesn't
work with Elements 13.
I have figured out a solution, if it will be of help. I had just
uninstalled Adobe Elements 12 and when I saw that Canon's plug-in worked
with Elements 12, I quickly reinstalled it. Sure enough, when I clicked on
AUTOMATION TOOLS there was the Canon plug-in, and when I clicked on it, the
Canon print screen opened. So I decided I would do my photo editing in
Elements 13, and when ready to print I would open the photo in Elements 12
and print it there. Hope that helps.
F
On Sat, Feb 28, 2015 at 4:08 PM, BMonahan9905 <[email protected]>

How to import multiple images at the same time in illustrator?

How to import multiple images in a document at the same time in illustrator?
It's possible?

Script: Place Multiple Files in Illustrator (Kelso)
http://kelsocartography.com/blog/?p=2047

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

How to move multiple images in applet

Hi,how to move multiple images in applet or random images in applet .
Means moving images.gif around the applet with different starting point ,help me to create that move method ..

why don't you check the tumbling duke applet as provided free in this site? :-)

How to add multiple images in jinternalframe

Hi all,
how to add multiple images to the jinternalframe, at specified location of the pane and resizing the images with specified height and width.
code examples are highly appreciated.
Thanks & Regards,
Abel

Thanks, it works perfectly. It's a really smart way of fixing the problem too :)
I also found your toggle button icon classes which is something I've also had a problem with.
Thanks.

How to resize multiple images?

I am newbie to RH and would like to know if there is a method /shortcut by which I can resize multiple images?
Specifically to my project: I have close to 50 tables containing various images and their descriptions. When I insert these images into RH, the original image size is inserted and these images are of various sizes.
I know how to resize multiple images in Word but not in RH and hence, reaching to higher powers
I am using RH 9
Appreciate all your help!

Hi There, Well the best option is to resize each image individually but if you feel that you can select all images together and the resize them all at once I am sure that you would like to give a read to this post from forums which talks about this job
http://forums.adobe.com/thread/466933

How to place multiple images?

Hi,
How to place multiple images?
Regards,
Learner

Is the script creating the frames? If so, just assign each frame a
variable, or make them all into an array. Then use something like:
myFrame.place("aFile");
If the script is not creating the frame, then are they live frames on
the page, or are they actually on a master page?
If they're on master spreads, you'll have to release them to the page
you want. (I think it's myMasterFrame.override(myPage) where myPage is
the live page you want to detach them on, but you'll have to double
check that.)
But presuming they're regular detached frames on a page, if you want
your script to figure out which is the first and which is the second you
can either use script labels in the UI and then search for the script
label, or else you'll have to write a function that will get all
rectangles on the page (myPage.rectangles.everyItem().getElements() and
either do a clever javascript sort, or write a straightforward function
to sort them by height and x-pos.
Hope that sheds some light on the task ahead!
Ariel

How to insert multiple images

How to insert multiple images in SQL/MySQL using servelet

donsankar wrote:
How to insert multiple images in SQL/MySQL using serveletuse a BLOB
are you sure you need to store images in the database?
why not store the image on the file system and store a link to the image file in the database
you really don't gain much putting images in the database

Photoshop Elements Help | Processing camera raw image files

This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/using/processing-camera-raw-image-files.html

gegjr wrote:
When I selected "Save Image" there is an option to select the size of the JPEG preview. Is there anyway to extract the JPEG and does the JPEG contain the adjustments that were made to the Raw image?
The "Save image" command just saves (really converts) the original raw into another raw format : the DNG format created by Adobe to get a universal raw format instead of a specific raw format for each camera in the range of each camera manufacters... Using that feature is your choice.
And what you see in the bottom line : 8 bits or 16 bits has nothing to do with a preview, it is the choice of 'color depth' for the image the converters sends to the editor.
So, your choice is either :
- to click 'Done' which saves the settings of your conversion (white balance, exposure, clarity...) to a very small 'sidecar' file of the xmp type
- to 'Open' in the editor where you can work with all features of the editor (which include saving the output file in any format - jpeg - psd - tiff - png...
http://forums.adobe.com/thread/1030798?tstart=0

How do I get images from Aperture into print shop for mac?

Friends,
I have Print Shop for Mac and Aperture. How do I get images from Aperture into Print Shop? I'musing managed images with previews. Is there any option besides exporting to the desktop and importing?
Thanks!
Steve

if you have previews turned on in Aperture and they're all genereated, you can simply drag-n-drop them into any application (just about). drag-n-drop is essentially the same as copy/paste as long as the application is setup to accept "drops" onto its windows.
otherwise, if you're running Leopard (10.5) as your version of Mac OS X, when you import (or whatever it is in PrintShop), you should get a file selection dialog. from here, scroll down the left-hand side bar set of icons. near the bottom is a group called "Media". click on the triangle to open the group, choose Photos, and from here you should see an Aperture icon. click this and you'll see your whole library (or at least the portion of it that you have previews generated for. select the photo you want and viola!
scott

Photoshop Elements 11 - how to print multiple images on a 4x6 print

Similar Messages

Maybe you are looking for