Photoshop Elements 11 possible glitch

When I use Photoshop Elements 11 editor and close it, I can't go back in until I open my manager and "end process." That gets really old throughout a day. Is there something wrong with the program? Is there a patch? Is it me? Help.

Go to the editor preferences>general, click this button and restart the editor:

Similar Messages

  • Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

    Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

    Yes, I see:
    Letzte Aktualisierung
    16.04.2012
    The link I gave is listed in the faqs of this forum.
    Photoshop Elements FAQ List
    mfG
    Michel

  • Photoshop Elements 11 boxed software installed once in Dec. 2012 won't install on new computer. Disk can't be read (tested on 3 different computers). How is that even possible of a meticulously clean, well-protected disk?

    Dear Adobe,
    I need your help!
    On December 12th, 2012 I ordered (purchased) by mail an official copy of the boxed Adobe Photoshop Elements 11 software from B&H Photo (New York, NY). I installed it successfully without any problem on my then computer. I have enjoyed using the program since then, it’s great. This past week, however, that same computer died and I was force to buy a new computer (Windows 8.1).
    To my big surprise, the Elements disk wouldn’t load off my DVD drive. The drive just kept “clicking” for 20 minutes.  After trying several times from reboot, for an hour and a half, I then tried installing it on my laptop, just to see if my drive was faulty. No, it wasn’t. It too immediately went into an endless “clicking” routine trying to read the disk. And for one last try, I put it in my sister’s laptop and she got the very same result - endless “clicking”, no install. No computer could read the disk!!!
    How is this even possible from a commercially made disk I used only once in 2012! The disk is meticulously clean, unscratched, unscuffed, put away in its original box and stored on my shelf in a cool place away from the sun!
        Serial Number of faulty disk:  1057-4186-6029-0039-1511-3940
    Is there anything you can do about this as I see no reason why I should be forced to spend over a $130 (in Canada) to replace a disk that worked only once!
    Regards, Andre

    copy your disc contents to a desktop directory.  install from that directory.
    if that fails, download the installation files:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • I had Adobe Photoshop Elements 4.0 on old computer but find folder is now empty is it possible to restore from Adobe?

    I had Adobe Photoshop Elements 4.0 on old computer & transferred to new computer - this file is now empty, so I must have deleted photos.   Is it possible to restore them?

    Photoshop Elements 4 is too old. It was written for PowerPC Macs and will not work on new Intel Macs. There is nothing you can do about it.

  • Photoshop Elements 13 - Is it possible to create a link in an image?

    Photoshop Elements 13 - Is it possible to create a link in an image?

    No, you would need to use your web design program to do that.

  • I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco due to the fact that I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible

    I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco.  I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible. 7: NULL ==*in Attributes." How do I get the online services back and running on my PS to allow me to have my photos processed by Costco online? 

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • Purchased Adobe Photoshop Elements 13 for Mac on line. Followed for instruction the email I got. Pressed download. Now a second screen appeared with possibility to press Akamai Download manager. Do I press it?

    Do I have to press  Akamai Download Manager  after I did the following?
    Bought Adobe Photoshop Elements 13 for Mac on line. Followed for instruction the email I got. Pressed download. Now a second screen appeared with possibility to press Akamai Download manager. Do I press it?

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

    I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

    I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

  • Is it possible to send photos from LR 5 to Photoshop Elements 12 and directly get them opened in layers?

    I want to do Exposure Blending in Photoshop Elements 12 and I am wondering if it is possible to send photos (RAW) from LR 5 to Photoshop Elements 12 and get them directly opend in different layers?

    I don't use Photoshop Elements. Photoshop has an option to open images merging them to HDR. Does Elements have an HDR option? If it doesn't then I don't think there's any way to send the images layered.

  • Is it possible to run photoshop elements 4.0 and premier 2.0 on Windows 7?

    Is it possible to run photoshop elements 4.0 and premier 2.0 on Windows 7?

    cvbug wrote:
    Thanks! I read the message wrong and thought I could not run it at all.
    Any article that says you can't run a program in Windows 7 that ran perfectly well in Windows XP or Windows Vista is suspect in it self and should be tossed out of your open window quickly.
    Windows 7 is not any different from XP or Vista except that security is much better and the GUI is better but is all XP and Vista behind the hood.  I am running some DOS programs in Windows 7!!! Now this must be magic!! 

  • Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

    bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

    A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
    PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    If you have any problem with the activation contact Adobe support using chat... Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • Is it possible to perform a photomerge Panorama using Adobe Photoshop Elements 13?

    Is it possible to perform a photomerge Panorama using Adobe Photoshop Elements 13?

    Barbara,
    The step I was missing was to change the mode via the control button at the top of the user interface from "Quick" to "Expert". Under the "Quick" mode Photomerge Panorama is grayed out. Thank you for your input!

  • Nstalling Photoshop Elements 13 and Premiere Elements 13 but I have no disc drive. Is it possible to install and register it online?, I bought at Media Market the CD for installing Photoshop Elements 13 and Premiere Elements 13 but I have no disc drive. I

    I bought at Media Market the CD for installing Photoshop Elements 13 and Premiere Elements 13 but I have no disc drive. Is it possible to install and register it online?

    I was in the same boat as you, so I went to Best Buy and purchased the box (on sale, by the way). I then downloaded the trials separately for Photoshop Elements and Premiere Elements from the Adobe product site.
    In the box you should have been given 2 discs (one for Photoshop Elements (PS) and one for Premiere Elements (PE)) and something called a "redemption code" on a square of colorful cardboard with instructions on how to get your serial keys for installation. The single redemption code is NOT the serial/product key you use to install your purchase. Once you follow the instructions on this card you will be shown two serial/product codes, one each for PE and PS. Write them down, print them, whatever, you will need them during installation.
    Now go to the downloaded trial file(s) and run the installer, either for PE first or PS, it makes no difference. During the installation you will be asked if you want to start a trial or use a serial/product code. Choose "I have a code". Enter the product key and you will be golden. Repeat for the other program.
    Hope this helps!

  • I installed a buyed version of Adobe Photoshop Elements 13. But is not possible to start the programm. I can read "There ist a problem, the program is not able to start". Is someone able to helb me?

    I installed a buyed version of Adobe Photoshop Elements 13. But is not possible to start the programm. I can read "There ist a problem, the program is not able to start". Is someone able to helb me?

    Without system information and other details we can't know what might be going on.
    Mylenium

  • Possible to update photoshop elements 8 from windows to Mac platform?

    I currently own photoshop elements 8 for the windows platform.  I now need to use this on my MacBook.  Is it possible to use my current serial number to download the installation or do I need to repurchase the product? 
    It seems that later versions of Elements come with compatibility to install on either platform but this isn't the case with mine.  I have one install CD for windows xp/vista/7
    Thanks

    No. For PSE 8 serial numbers were not cross platform. You could buy a crossgrade from adobe, but you would still have to pay the upgrade fee on top of the processing fee since adobe only ships the current version. So there's no point.

Maybe you are looking for

  • Some keys are not working on my laptop

    Hello, i am new here and this is my first question. I bought  HP Laptop G4-1200TX from a local dealer 2 years ago. It worked fine till last year when i ,manually, upgrade its window from win7 home basic to win7 premuim and then to win7 ultimate. Afte

  • Tables with differing numbers of columns in subsequent rows

    I'm trying to create a table that has say 3 columns in row one, 2 columns in row two, 5 columns in row 5. I've done it so far by merging cells and splitting them and then asking it to distribute columns evenly but the columns are not distributed even

  • Allowing only single selection in slicers

    Hi Team, I am creating a dashboard in excel 2010. There is a slicer which selects products but it should always allow only one selection. Is it possible to throw an exception or doesn't allow to do a multiple selection in excel slicer without any VBA

  • Remove KM permissions for childs folders and not for the father folder.

    Hi Forum    I am removing a "some_group" permisssion of a subfolder in a repository, but how can i remove only this subfolder permission and not the father permission ?   For example:      I want the next the repository with the "some_gruup"  permiss

  • HT1338 Im thinking of getting Logic Pro X but will Mountain Lion work ?

    Hi There, How's it going? Will Mountain Lion Work on my MacBookPro 15"  Nov. 2006 ya 7 years old now. works great but lacking the power of a new Mac. Im running 10.7.5 now Lion The Processor is a 2.33 GHZ and I have 2 GB of Memory 750 GB WD Hard Driv