Photoshop Elements 11 trial version screen too large to view

I cannot use Photoshop Elements 11 because the screen is too wide and I cannot change the size.
The tools are not visable since the Photoshop Editor brings up such a wide screen.
If this can be fixed, I would also like to know how to change the background color in a photo.
Thank you,
Bernice Ross
[email protected]

The minimum resolution supported by PSE 11 is 1024 *768. So if your screen resolution is higher than this  , then all controls in the application should be properly visible. Even if the screen seems to wide  then hover your mouse on the extreme right side of the app until you see a dragging arrow and then drag until it fits the screen
To your second question the answer is that  there are many ways to change a background in PSE which depends upon what background in  the image you want to replace and what do you want the background to look like. It would be easier to answer this if you can post a  screenshot of the image .

Similar Messages

  • Photoshop Elements 12 trial version

    My photos in photoshop elements 12 trial version can't be reconnected,. How do I delete them?

    You can select all thumbnails in All media view (Ctrl+A) and hit delete - but do not choose to also delete from disk.
    You can then import from the folders where the images are now located. But you will not see keywords and captions unless you first write metadata to files. If you don't have a large catalog and that is not a concern, go ahead, and start over.
    In future don't move files and folders using your operating system otherwise Elements knows nothing about it. Always drag and drop and rename within Organizer to avoid missing files.

  • Photoshop Elements 12 trial version won't install

    I have an Mac running iOS v10.9.4 and I currently have Photoshop Elements 10 installed. I'm trying to download the  Photoshop Elements 12 trial version. The Install Adobe Download Assistant has been copied to my Downloads folder. When I try to open the file it stops and gives me the following error message: "The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author." Any suggestions?

    You can try skipping the dowload assistant and get PSE12 trial directly via the link below.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

  • Adobe photoshop elements 13 trial version will not work on windows XP. Does this mean that if I purchase the full version, this also will not work on XP?

    I have Photoshop Elements 12 and want to try version 13 before I buy. However, when I tried to download the trial version of Adobe Photoshop Elements 13, I was informed that it isa not available on Windows XP. Does this mean that if I buy the full version, it will not work on Windows XP?

    Yes, if the system requirements do not include XP then an XP machine will not be able to use it.
    System Requirements
    Windows
    1.6GHz or faster processor with SSE2 support
    Microsoft Windows 7 or Windows 8 (32-bit versions will be installed on 32-bit systems; 64-bit versions will be installed on 64-bit systems)
    2GB of RAM
    5GB of available hard-disk space
    (additional free space required during installation)
    1024x768 display resolution (at 100% scale factor)
    Microsoft DirectX 9 or 10 compatible display driver
    DVD-ROM drive (for installation from DVD)
    QuickTime 7 software
    Internet connection required for product activation and content download* 

  • Exporting from Lightroom 4 to Photoshop Elements (Both trial version)

    I have downloaded both the trial versions of the software and wanted to experience how they interact with each other.
    I cant seem to be able to export my file from lightroom to photoshop though
    Is this possible with the trial versions?

    Trial version should make no difference.
    One does not "Export to Photoshop" - Export is for one-way output.
    Photoshop, or Elements, or other editor is called in as a partner program via "Edit In..." and the options for this are set up in LR Preferences / External Editing tab.
    If Elements is not automatically appearing there, and you don't want to re-install anything in order to resolve that, you can instead manually set that up in the "additional editor" section below. Choose the Elements editor program file, a filetype and colourspace and bitdepth, and name this setup as an external editing preset. This preset then appears in the Edit In.. section of the context menu when you right-click on a photo in LR. A new file is made on disk according to your specifications, in the same folder, reflecting your LR adjustments to date, and Elements is started with this file open for editing. Save and close when finished (not save as). LR now shows a new image version, next to the original you started with, reflecting your external edits. These edits (any layers etc) remain available for further work thereafter via the "edit original" option.
    So you can go back and forward as required between the two programs, always remembering that these two KINDS of adjustment / editing, are physically independent.

  • Photoshop Elements 10 - trial version - uninstall

    I have downloaded a trial version of Photoshop Elements 10 in order to see if there are things I could not do with my CS3. After see the program I saw I was not interested on it so I try to uninstall but I have not found any uninstall file.
    I have gone to Control Panel / Uninstall Programs but Photoshop Elements 10 do not appear in list. Only CS3.
    I try to delete the program file but a message appear saying I was not allowed to delete file.
    Today I return to see if I could uninstall. I try to enter on Photoshop Elements 10 to see if in Help file appears something about uninstall but trial licence is expired so I could not enter in program.
    I need and want to uninstall Photoshop Elements 10 but I do not know how I can do it once I have tryied the 2 ways I know to uninstall a program.
    Please hep me.

    Run the Photoshop Elements Installer again. If PSE exists on system it will first uninstall it.

  • Can't download Photoshop Elements 12 Trial Version

    I am trying to download the trial version of Photoshop Elements 12.  When I click on "Download" in the below dialog, I get the pop-up "Error 100 error message.  My Internet connection checks out O.K., and I have tried restarting Download Assistant, but no luck.  What do I have to do to download the trial version?

    You can skip troubkles with the download assistant and download the trial version of the software directly thru the page linked below.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 12:
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    If you want to try to troubleshoot the download assistant...
    Troubleshoot Adobe Download Assistant
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.htm

  • Photoshop Elements 8 trial version

    Does anyone know where I can get a copy of Photoshop Elements 8 30-day trial version? Perferably for MAC, but for Windows would be okay. Would appreciate if anyone can help out.

    PSE 9 has been released and you can download the trial from the link.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en_us
    -Garry

  • Photoshop Elements 8 - Organizer - File size too large

    I have a new computer running Windows 7 with gobs of RAM and hard drive space.  I’ve recently installed Photoshop Elements 8.
    I am having the following problem in the Organizer for some 35MM slides that I’ve scanned at 1600DPI.  It looks like the pixel size in one example is 9590x6013 = 57,664,670.  Based on some reading on the internet it appears that the standard limit in Organizer is 54 megapixels (56,623,104 pixels).  Looking over all of my slides I think I will need around 62-65,000,000.
    I found an Adobe TechNote, http://kb2.adobe.com/cps/402/kb402760.html, that seems to address this issue for earlier versions.  I’ve tried a few times with no luck to follow these notes but there are some differences in my Registry as I’ve noted below in steps 4&5 of the instructions. 
    I’ve restarted both my computer and Photoshop Elements after making the registry change with no change in the Organizer message.  I’ve removed the pictures from the catalog and added them back with no change.  They look fine in the Editor.  The pictures also look fine in all Windows tumbnails.
    The following instructions are copied from the TechNotes.  I’ve made two comments in Red where I was a little unsure since my Registry after install of version 8 does not exactly match these version 5&6 notes.
    Some instructions I found on your website
    To override the maximum image size limit for the Organizer:
    Exit the Organizer.
    Choose Start > Run.
    Type regedit in the Open field and click OK.
    In the left pane, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ADOBE\Photoshop Elements\5.0 for Photoshop Elements 5.0 and HKEY_LOCAL_MACHINE\SOFTWARE\ADOBE\Photoshop Elements\6.0 for Photoshop Elements 6.0.  Notice that my Adobe is not under HKEY_LOCAL_MACHINE it is under HKEY_CURRENT_USER.
    Highlight the Organizer folder in the left pane.
    I’ve noticed that I have two “Organizer” folders under the Adobe registry.
    HKEY_CURRENT_USER/Software/Adobe/Elements Organizer/8.0
    HKEY_CURRENT_USER/Software/Adobe/Photoshop Elements/8.0/Organizer 
    Thus far, I’ve only tried this DWORD in the second option.
    Choose Edit > New > DWORD Value, and name the new value MaxImageSize.
    Highlight the MaxImageSize DWORD and choose Edit > Modify.
    Change the Base option to Decimal.
    In the Value Data field, enter the new maximum size for an image in pixels. For example, if you want to change the limit to 24 megapixels, then enter 25165824. (To determine a megapixel value in pixels, multiply the value by 1024 x 1024.) If there is a specific image size you are trying to import, then use the this forumula: width x height x 1024 x 1024.
    Click OK.
    Exit the registry.
    Start the Organizer. If you had previously imported images that were over the limit, then delete them from the catalog and re-import them to display the thumbnail.
    Thanks,  Tom

    Hi Tom,
    I'm having the sampe problem.  Did you ever resolve this issue?

  • Photoshops elements 13 trial version not working, Keeps telling the editor has stopped working

    Downloaded & installed PS elements 13. when I try to start it up  a box tells me the editor has stopped working and gives this in problem details:
    Problem Event Name:    APPCRASH
      Application Name:    PhotoshopElementsEditor.exe
      Application Version:    13.0.0.0
      Application Timestamp:    54024871
      Fault Module Name:    libcef.dll
      Fault Module Version:    3.1750.1738.0
      Fault Module Timestamp:    539860dd
      Exception Code:    c000001d
      Exception Offset:    00000000020f3553
      OS Version:    6.1.7600.2.0.0.768.3
      Locale ID:    2057
      Additional Information 1:    1849
      Additional Information 2:    1849c65267ce2967d89f315e1c3c4b82
      Additional Information 3:    4bd2
      Additional Information 4:    4bd2aa1900d8927bd0f22b0bbfeb6f46
    Never used PS before  not sure if I need any other PS programs

    Hi Charles,
    Sorry for the inconvenience caused.
    Please refer to this KB article:
    https://helpx.adobe.com/photoshop-elements/kb/elements-13-crash-windows-7-crt.html
    and see if it helps.
    Thanks,
    Anwesha

  • Photoshop Elements 10 Trial Version

    Installation was interrupted and could not finish, I think it did not install Photoshop Organizer or something, it instructed me to click on finish button. will it affect the use of Photoshop elements 10? I downloaded on a usb to use on another computer. what do I do?

    Run the installer again. If that does not work, uninstall the software from your computer, restart (just to be sure) and then reinstall.
    You already have the installer on the usb so it should not take much time.
    Let us know if it helps.

  • I installed Adobe Photoshop Elements 12 trial version today, and I can barely do anything.

    I can open files, but I can't color anything or open a new layer. The options are grey and unclickable. I need help. I've tried restarting my computer and everything, but nothing works in Photoshop Elements.

    At the top of the PSE window click where it says Expert. Then all menu options will become available.

  • Photoshop elements 13 trial version:

    Can I use photo merge panorama function ? It seems to be greyed out for me.

    Awesome. In expert mode its available
    Thank You !

  • Photoshop elements 12 trial

    I downloaded photoshop elements 12 trial version, after i sign in it wont let me do anything, it says im signed in but it just stays on same page, please help

    Hi,
    Were you able to launch the product after sign in ?
    -Shikha

  • Can't install Photoshop Elements 11 licensed version because of trial version

    I can't install Photoshop Elements 11 licensed version because of trial version that is still on my computer and is not being completely uninstalled.  The intended folder to install has some files remaining from the trial version, and this prevents the licensed version from installing.  The intended folder from teh installer is Program Files (x86)/Adobe, but that has the trial version still there, which will not completely uninstall. 

    Hi Steve,
    Are you getting error message while installation.
    Regards,
    Romit Sinha

Maybe you are looking for

  • Solaris 10 64bit for Intel's EMT64 Technology???

    I've read about SUN's support for AMD's 64 bit technology and the recently release commercial Server Platforms. Does anyone know IF SUN's Solaris 10 release is available in 64bit aware flavor for Intels' EM64T XEON processors? I also read the Solaris

  • Claims Digger report - values for changes in duration/float/lags

    When I compare two projects using Claims Digger, I always get results for changes in durations, float and lags in hours as opposed to days? Is there a setting that can fix this? Please advise. Thanks!

  • Book  1.) show no metadata under the photo, 2.)add caption/text under photo

    Currently the Photo name is shown in the book under each photo. 1.) I would like to hide this information for printing. I played with the setting "enable/disable plate metadata" , but it has not impact, it shows the data no matter what this setting i

  • Picture is going missing after url forwarding

    I've posted my front page to my .me account then forwarded the address to my .ca host, nothing new really but when I go to my .ca the front page image is missing. .me url http://web.me.com/ichariot/LNL/Blank.html .ca url (missing image) http://www.lo

  • Is it possible to copy a user fm one client to another

    Hi'   Is it possible to copy a user from one client to another client?   e.g., in our DEV we have two client say 500 & 201.A user say dev_user is present in client 500 with some authorization.Now i want the same user dev_user with same authorization