Photoshop Elements 12 fails to initialize

New install of Photoshop Elements 12 fails to initialize.  Serial number was accepted during installation.  Double clicking the icon gets the program started for just a few seconds then stops.

is pse 12 part of a cc subscription?
if yes, http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately-launch.html

Similar Messages

  • Could not initialize photoshop elements could not initialize ACE implementation

    Hi,
    Hoping somebody can help.I have Adobe photoshop elements 2.0 (i know its pretty old).Its always worked well until lately its bringing this message up and not letting me open it : could not inialize photoshop elements could not initialize ACE implementation.
    I have been trying to clean up the computer and am not 100% confident at using the computer so im afraid i have deleted or locked something that this program needs to run.
    Can any body help?
    Erica

    Repair does not work on any Windows version of PSE.  Try resetting the preferences:  Press and hold CTRL, ALT, and SHIFT when launching Elements until you see a box asking if you want to delete the settings.  Yes, you do.
    Juergen

  • Retry of unsuccessful installation of Photoshop Elements fails because it cannot find files which it believes to be present in order to remove them first.

    W7 CD of both Photoshop Element and Premiere Elements 12:  Could get the Organizer of Photoshop installed and working but could not install the editor completely; Premiere Elements seemed to install OK but I was at the time only interested in using Photoshop so did not verify this.  Read instructions in Troubleshoot Installation, and for convenience dragged the CD files to the C Drive.  I then re-ran the installation process, which initially tries to uninstall the existing installation but this failed as it stated that some files were in use.  I ended up uninstalling Premiere Elements because of the shared components but this made no difference.  I used Windows Remove Programs tool but it stated that some files were in use so could not be removed.  I used autoruns to search for and prevent from launching at Startup, all Adobe s/w, then searched for and tried to remove all Photoshop files but got the same message.  I have subsequently discovered that I need to remove them in a specific order, next I ran CCleaner to clear the registry.  Still the same problem, so tried the install from a Clean Boot.  Same problem, the wording is currently Error 2343 Specified Path is empty.  I re-installed Premiere Elements which appears again to be OK before try to re-install Photoshop Elements - the same error message appears.  The Start search box finds 3 register entries for Photoshop but no files.  The register entries date are from earlier installation attempts on different dates: cc_20141016_211910.reg     ......_141008.reg   .........._213127   Should these be manually deleted?  Any other suggestions?

    Thank you very much.
    I did uninstall Adobe Air, Adobe Reader XI and another Adobe product, rebooted, and after this the installation was possible with no problems!

  • Photoshop Installer failed to initialize. Help?

    Hello adobe! When trying to download a trail of photoshop the installer resulted in the following issue:
    Installation Failed
         Your installation encountered errors.
    Installer failed to initialize. This could be due to a missing file.
    More troubleshooting tips:
    1.Restart your computer
    2. Exit all applications including startup items, virus checking and firewall software.
    3. Launch the installer and reinstall your applications.
         I looked into this issue for probably around 5 hours now and attempted everything possible (or at least any solution I could find). The attempts tried and failed go as follows:
    - Disabling all startup processes in msconfig
    - Disabling antivirus temporarily
    - Using the CCcleaner to produce a log and delete files
    - Downloading multiple products from adobe (none working and same error)
         These programs include premeire
    - Trying to use the installer on multiple drives (I have 3 total)
    - Multiple accounts and directories
         My PC's specs:
    -Intel core i7 4770k 3.5GHz
    -(ASUS) Nvidia Geforce GTX 760
    -8 GB RAM
    -Samsung SSD and two other HDDs
    My guess as to the cause for the problem is that I have moved my users and program files directories to one of my HDDs.
    The log:
    Gen_WWCombined-en_US-20121017_1230
    [Mon Dec 09 16:36:30 2013] Please enter (y) for Yes or (n) for No. ... >>
    [Mon Dec 09 16:36:31 2013] Choose from one of the following options to clean up :
    [Mon Dec 09 16:36:31 2013] 1.  All
    [Mon Dec 09 16:36:31 2013] 2.  Adobe Flash Player 10.2
    [Mon Dec 09 16:36:31 2013] 3.  Creative Cloud & CS6 Products
    [Mon Dec 09 16:36:31 2013] 4.  CS6 only
    [Mon Dec 09 16:36:31 2013] 5.  CS5-CS5.5-CS6
    [Mon Dec 09 16:36:31 2013] 6.  CS5-CS5.5
    [Mon Dec 09 16:36:31 2013] 7.  CS3, CS4
    [Mon Dec 09 16:36:31 2013] 8.  Adobe Id credentials
    [Mon Dec 09 16:36:31 2013] 9.  Quit
    [Mon Dec 09 16:36:31 2013] Choice :>
    [Mon Dec 09 16:36:33 2013] User selected: All
    [Mon Dec 09 16:36:33 2013] DB does not exist at: B:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Mon Dec 09 16:36:33 2013] DB does not exist at: B:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Mon Dec 09 16:36:33 2013] DB does not exist at: B:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    [Mon Dec 09 16:36:33 2013] List of products installed on this machine
    [Mon Dec 09 16:36:33 2013] Listing products for cleanup:
    [Mon Dec 09 16:36:33 2013] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
    [Mon Dec 09 16:36:35 2013] Are you sure you want to clean all the listed products and associated files?
    [Mon Dec 09 16:36:35 2013] Type (y) to confirm and remove or (n) to quit ... >>
    [Mon Dec 09 16:36:37 2013] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
    [Mon Dec 09 16:36:37 2013] :: Cleaning-up left over inventories ::
    [Mon Dec 09 16:36:37 2013] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: False
    [Mon Dec 09 16:36:37 2013] ::Start:: Removing AUM contents
    [Mon Dec 09 16:36:37 2013] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:AdobeAAMUpdater-1.0
    [Mon Dec 09 16:36:37 2013] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
    [Mon Dec 09 16:36:37 2013] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:ADOBE_UPDATER_STARTUP_UTILITY
    [Mon Dec 09 16:36:37 2013] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
    [Mon Dec 09 16:36:37 2013] Deleting scheduled task : AdobeAAMUpdater-1.0-ThirtyVirus-PC-ThirtyVirus
    [Mon Dec 09 16:36:37 2013] Executing command: schtasks /delete /TN "AdobeAAMUpdater-1.0-ThirtyVirus-PC-ThirtyVirus" /F
    [Mon Dec 09 16:36:37 2013] ERROR: The system cannot find the file specified.
    [Mon Dec 09 16:36:37 2013] Deleting scheduled task : AdobeUpdater Task-ThirtyVirus-PC-ThirtyVirus
    [Mon Dec 09 16:36:37 2013] Executing command: schtasks /delete /TN "AdobeUpdater Task-ThirtyVirus-PC-ThirtyVirus" /F
    [Mon Dec 09 16:36:37 2013] ERROR: The system cannot find the file specified.
    [Mon Dec 09 16:36:37 2013] ::Finish:: Removing AUM contents
    [Mon Dec 09 16:36:37 2013] ::Start:: Removing OOBE
    [Mon Dec 09 16:36:37 2013] Executing command "taskkill /F /FI "IMAGENAME eq AAM Updates Notifier.exe""
    [Mon Dec 09 16:36:37 2013] INFO: No tasks running with the specified criteria.
    [Mon Dec 09 16:36:37 2013] ::Finish:: Removing OOBE
    [Mon Dec 09 16:36:37 2013] Removing content of Product : CS5Installer, Version : CS5
    [Mon Dec 09 16:36:37 2013] File does not exist: B:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Mon Dec 09 16:36:37 2013] File does not exist: B:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Mon Dec 09 16:36:37 2013] LOG FILE SAVED TO: B:\Users\THIRTY~1\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
    [Mon Dec 09 16:36:37 2013] Adobe Creative Cloud Cleaner Tool completed successfully
    [Mon Dec 09 16:36:37 2013]
    [Mon Dec 09 16:36:37 2013] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Mon Dec 09 16:36:33 2013] DB does not exist at: B:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Mon Dec 09 16:36:33 2013] DB does not exist at: B:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Mon Dec 09 16:36:33 2013] DB does not exist at: B:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    [Mon Dec 09 16:36:37 2013] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Mon Dec 09 16:36:37 2013] ---------------------------------------------------------
    [Mon Dec 09 16:36:37 2013] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
    [Mon Dec 09 16:36:37 2013] ---------------------------------------------------------
    Anything that you can do? If so thank you! Thanks!

    I had a similar problem with installation of CS6 Extended.
    I searched all through the forums and the internet, could not find an answer to this issue. On another forum, someone suggested this option for a differnt issue. I tried it for mine and it worked.
    Download a newer version of Adobe Application Manager (https://www.adobe.com/support/downloads/detail.jsp?ftpID=4773)
    Installed the application manager and than install your softwre. CS6 Extended loaded right up.
    DDW

  • Photoshop CS6 "failed to initialize" error...

    hi, everyone.
    i tried to install photoshop CS6 but i got "failed to initialize" error message.
    i tried everything in the web site http://forums.adobe.com/message/2786497#2786497 but it didn't work out.
    i uninstalled all adobe product with appcleaner than try to install but it didn't work.
    i opened in the safe mode but it didn't work out.
    i don't want to install MacOSX again if that's the solution.
    Please Help...
    My Operating System:
    Mac OS X 10.8.2
    My PDpp.log:
    Mon Feb 11 00:03:31 2013
    [INFO] PIM - START installPackage at file /Volumes/CS6 MstrColl/Adobe CS6 Master Collection/packages/UWA/UWA.pimx
    Mon Feb 11 00:03:32 2013
    [WARN] PIM - RemoveQuarantineInfo from File /Users/Murat/Applications/Adobe/OOBE/PDApp/install.sig .
    Mon Feb 11 00:03:32 2013
    [INFO] Setup - TimeLog: End Installing. Now launching PDApp
    Mon Feb 11 00:03:32 2013
    [FATAL] Setup - Adobe Application Manager executable does not exist at the location: /Users/Murat/Applications/Adobe/OOBE/PDApp//core/PDApp.app/Contents/MacOS/PDApp
    Mon Feb 11 00:03:32 2013
    [FATAL] Setup - Unable to launch PDApp
    Mon Feb 11 00:03:34 2013
    [INFO] Setup - =================  Exiting Installer with Code: 0  =================

    thank you for your answer.
    But, i already deleted all adobe products with appcleaner unfortunately so i don't have any uninstaller to run.
    after deleting adobe products. i only install adobe flash player and adobe reader.
    i run the adobe creative suite cleaner tool, it didn't find any session to delete even if i use option "All" at the top of right corner in the program.
    now i only have flash player and reader, what should i do please help...

  • Photoshop Elements fails

    Just loaded Photoshop Elements 4.0 to Macbook with OS X 10.4. Upon opening after install, error message that application cannot launch. It fails onscreen as TWAIN menus are running. Is Elements conflicting with my CS versions of Indesign and Illustrator? I am running Acrobat 6.0. I have an Epson Stylus CX4200 Printer/Copier/Scanner. Is there a conflict with this? I am also having neverending problems setting up Mail with sympatico. Do you think I have bought a lemon mac here?

    The mac version of elements cannot use your catalog and does not contain the organizer. If you have tags you want to keep for use on the mac, use the write tags to file command in the Windows organizer, which will convert the tags to metadata keywords the mac version of PE can understand. Depending on your external is formatted and what kind of sharing you've got set up, the mac should be able to see the photos on the external.

  • Why did my install of an older version of Photoshop Elements fail?

    I tried to install a 2001 version of Photoshop Elements, but it failed to install stating that "Microsoft Internet Explorer 4.0 or later is Required." I have Windows 7, so therefore I should have at least Internet Explorer 9. Also when I tried to install it on my MAC it also failed stating that "Install failed because Classic Mode is no longer supported." So why can't I install this program on my MAC or Windows 7?
    I just bought this off eBay hoping to score a deal on an older program to use and get familiar with before installing a newer version and finding out I didn't like it or it wouldn't meet my needs. Any help in this manner is appreciated. Thanks in advance.

    Hi,
    First off, you must be referring to a very old version of Photoshop Elements, not even sure it is version 1. Learning that will not help you very much when you try to go for the latest version - it will be like starting again.
    The old version did not know anything of the later versions of Internet Explorer and the installer gets confused. You can trick it by doing some registry edits (see following document) but I strongly advise against it unless you are very competent with computers. Get things wrong and you could kill your system.
    Photoshop Elements (PSE) knowledge base.
    In addition to the level of Internet Explorer, you will run into problems if you have large disk drives.
    I'm not a MAC expert but the older versions of Photoshop Elements were designed to run on PowerPC-based computers and will not run on systems later than MAC OS 10.6.x.
    If you are serious about getting to know Photoshop Elements, the best thing is to get the latest trial version. Download that and install it and you can try it for 30 days. If you decide you like it, then you could look out for bargains at your local store or online.
    Brian

  • Photoshop cs6 failed to initialize when trying to install

    Hey, i get this really weird bug when i try to install photoshop cs6
    PDapp here http://pastebin.com/MS6UY4Mb
    I tried to remove an old version with Revo uninstaller, and when trying to install that one after, it just did that
    Theres the error, in Danish though, but it says:
    "An error occured
    the installationsprogram could not be initialized, Download Adobe support advisor to register the problem"
    The problem is, i have downloaded it, but it does not help, or fix it.. this is really annoying me, please help
    -Jesper

    Maybe someone over at
    http://forums.adobe.com/community/download_install_setup
    might provide more insight.
    I tried to remove an old version with Revo uninstaller,
    Did you also try the Adobe Uninstaller or the Clean Script?

  • " Could not initialize Photoshop Elements because... "

    Hi Everyone,
    So, I have this problem with my Adobe Photoshop Elements 5.0. Everytime I try to open the program itself I get the following message...
    "Could not initialize Photoshop Elements beacuse the file is locked. Use the 'Properties' command in the Windows Explorer to unlock the file."
    I have read many threads on this problem, and have tried it all... I might have missed something but I don't think I did..
    I didn't try to do anything with the program, just one day it wouldn't work...
    If you have any ideas Please let me know !
    Thank you,
    3mm@Lue

    http://www.unis.no/50_INTERNAL/5020_It_Info/documents/solved_problems/photoshop_elements_s tartup/PhotoShopElements.htm
    Photoshop Elements does not start
    Some of you have reported a problem when starting Photoshop Elements:
    "Could not initialize Photoshop Elements because the file is locked.
    Use the 'Properties' command in the Windows Explorer to unlock the file."
    SOLUTION:
    Sometimes Photoshop Elements may start acting strange and may start to cause problems that weren't there before, or Photoshop Elements might become corrupt. One simple fix to a variety of problems is to delete the settings file and have Photoshop create a brand new one during next startup.
    To do this hold down the following keys while the program starts:
    Ctrl+Shift+Alt
    You should be prompted with a dialog box that says:
    "Delete the Adobe settings file?"
    Click ok and the program will continue to start.
    If you don't get the dialog box asking if you wish to delete the settings file, then you didn't hold down the key command early enough. Close Photoshop and try again.
    IT
    UNIS

  • Photoshop Elements 13, the iTunes "Sync Photos from Photoshop Elements" feature no longer works

    Photoshop Elements 13, the iTunes "Sync Photos from Photoshop Elements" feature no longer works??? Is had worked with photoshop 9 pretty good? how can I enable this feature?
    thx. francisco

    I am experiencing the same problem after upgrading to PSE13, but haven't found a solution yet.
    TomWoodbridge proposes a workaround, see Re: iTunes Photo Sync with PhotoShop Elements Fails after PSE Update
    Another permanent workaround (which doesn't require to copy the pse database every time you want to sync) is described here: Elements 13: Cannot synchronise photo albums in iTunes after upgrading from Elements 11
    Hope this helps.

  • Updating iPad photos  from Photoshop Elements

    When I select photo albums in Photoshop Elements using iTunes and then try to sync my iPad, the sync seems to hang up during the Photo phase.  I tried resetting my iPad.  that didn't help.
    Also, when I modify an abum in Elements, the modifications don't show up  the next time I sync my iPad.
    Help would be greatly appreciated.  thanks

    I am experiencing the same problem after upgrading to PSE13, but haven't found a solution yet.
    TomWoodbridge proposes a workaround, see Re: iTunes Photo Sync with PhotoShop Elements Fails after PSE Update
    Another permanent workaround (which doesn't require to copy the pse database every time you want to sync) is described here: Elements 13: Cannot synchronise photo albums in iTunes after upgrading from Elements 11
    Hope this helps.

  • How to install Photoshop Elements 11 on Macbook Pro 10.8.3 after the installer failed to initialize

    I tried several times to install Photoshop Elements 11 on my new Macbook Pro (10.8.3) but the installer failed to initialize and the Support Advisor inspection could not identify any issue. I went today to the Apple Store to get help and the Genius guy couldn't resolve the problem either. He told me to contact Adobe Support and he gave me an Adobe token number.
    Does anyone knows how can I resolve this problem? Any help would be truly appreciate it!!!
    Thanks a lot!!!

    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Can't get Photoshop Elements 11 to install. Adobe Installer message: Installer failed to initialize.

    Can't get Photoshop Elements 11 to install.
    ... Adobe Installer message: Installer failed to initialize. This could be due to a missing file. Please download Adobe Support Advisor to detect the problem.   
    ... Adobe Support Advisor message "Inspection could not identify any issues. Please contact Adobe Support for further assistance. http://www.adobe.com/support."
    ... .... So far I have downloaded twice, to two different folders (Desktop and my default download folder). Neither option has worked.  Please help!  I'd like to download Premiere Elements 11, but with this kind of installation problem on PSE11, it seems a second program may be as much of a problem to try to install.

    As Mylenium has stated all we have is a very general error message at this point so it is impossible to advise you until we have additional details.  Please review your installation logs by following the steps listed in Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html.

  • When I try to install Photoshop Elements I receive the error installer failed to initialize.

    I am having the same issue.  Purchased Photoshop Elements 10 just a few minutes ago, and even though the download (direct download of PSE10) seemed to go fine, I ran the installer and got a message reading, "Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem."
    After downloading and running Adobe Support Advisor, the message I got reads, "Inspection could not identify any issues.  Please contact Adobe Support for further assistance."
    Can you help?
    Thanks,
    Lindy

    Thanks for your reply.
    I have tried downloading and several times.  I have used the Akamai downloading method and the direct download.  I am able to download the .dmg file but not install the application.
    I am on a Mac Pro 2.93 GHz running OS10.6.8, and I have plenty of RAM (8GB) and hard disc space (>350GB).
    I have also placed a call to customer support.  Waiting for a call back.
    Again, thanks.
    Lindy

  • Photoshop elements 11 installer failed to initialize

    I am attempting to install photoshop elements 11 on a macbook, and am getting an error message "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem."
    I downloaded Adobe Support Advisor, and it reported only the following error (although it is repeated many times):
    Adobe Photoshop Elements 11 11.0 cpsid_90243r4: Error DW020 or DW050 occurs during installation - Creative Suite 5.5, Flash CS5.5, Flash Builder 4.5
    Click here for details and corrective actions related to this issue.
    System Information :
    Operating System = OS X 10.8.2 (12C2034)
    Locale = en
    I followed the link for "details and corrective actions" - the link is http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html - and it simply says "You can ignore this error and launch the products you were installing" but the product did not install.
    How can I fix this so that it will let me install the product?
    Thanks in advance

    It appears that the Adobe Support Advisor was unable to detect the error which caused your installation failure.  Please review your installation logs manually.  You can find details on how to locate and interpret the logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Photoshop elements 10 'installer failed to initialize'.  What do I do?

    photoshop elements 10 'installer failed to initialize'.  What to do?

    Hi there,
        Sorry for the inconvenience. The first troubleshooting for this error is to update the Adobe Application Manager. Please install the latest version of Adobe Application manager from the below link and try to start the installation.
    http://www.adobe.com/applicationmanagerpatch/index.html
    Revert back if you are getting the same error. Please also mention the version of the product, the platform name and version that you are using.
    Regards,
    Jairaj

Maybe you are looking for

  • Lowering resolution on Dell E6510/Intel GM45HD

    Not sure if this is the right forum... anyway, I seem to be unable to lower the resolution on my laptop screen from the default one of 1600x900 (I need to get it to 1024x768 to clone the output to a projector). Attaching an external monitor works fin

  • FileAdapter Maximum file size

    Hi As per the SAP help document to restrict the file size in Advanced Mode of File sender adapter i used to following variable Name :MaximumFileSize  Value: 10000 So that only files of size less than 10000 bytes should be picked up. Otherwise error s

  • HT2534 is this outdated or just me ???

    where is the "none" i'm 12 years old and i dont have a credit card and i dont think my dad would let me use his !!!

  • Using FlipView to create a PhotoViewer with pinch to zoom capability (like WP8 PhotoApp)

    Hello, I'm currently developing a Universial App using WinRT to develop for Windows 8.1 and WP8.1. Inside that app I want to view a couple of images. Viewing the images works just fine with a FlipView but the disadvantage is, you cannot zoom. I searc

  • Passing state into a Task called from a continuation

    I have implemented a solution from Crafting a Task.TimeoutAfter Method and I curious about the best practice regarding passing data upwards from a Task to its continuation. I would like to know if the parent task released the semaphore, I could simpl