Photoshop Elements 12 will not recognize Perfect Effects 4 as a plug-in

I have just upgraded from Elements 11 to version 12 and cannot get the new version to recognise Perfect Effects 4 as a plug-in. I have verified the path and even copied any relevant plugin files from the Elements 11 directory into the corresponding Elements 12 directories, but still no luck. This is running on Windows 8 64bit. Any assistance would be appreciated

In case anyone else runs into this, I was also experiencing an issue with Elements 12 upon trying to open a photo - the message stated: ONCoreFoundation7.dll is missing
in researching, I found this forum entry:
http://forums.adobe.com/message/5759383#5759383
The paths are different for the missing files, but once found and copied into the Elements12 directory, the program now shows Perfect Effects4 as a plugin. Hope this helps someone else in the future.

Similar Messages

As of today photoshop 11 will not recognize my scanner.

As of today, Photoshop 11 will not recognize my scanner. It was working fine before. My scanner is connected via wifi. Yesterday I lost the wifi connection so i reinstalled the scanner (cannon printer MG6120). Now it prints photos ok but I can not scan. It gives me an error that says I must connect my scanner to the computer.

Brian, Thank you for your help. I went to preferences and changed to a different printer and know it works. Thanks again.
From: LittlePaleFace
To: [email protected]
Sent: Friday, January 25, 2013 1:42 PM
Subject: As of today photoshop 11 will not recognize my scanner.
Re: As of today photoshop 11 will not recognize my scanner.
created by LittlePaleFace in Photoshop Elements - View the full discussion

Adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I cou

adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I could manually rebuild my collections into the photoshop elements 12, but all that i see in photoshop elements is dates and i have multiple pictures from the same dates. HELP! I

finally getting back to this project---adobe starter edition 3.2 is on a windows XP computer
ADOBE PHOTOSHOP ELEMENTS 12 is on our Windows 8.1 computer.
error messages--- had to give up trying to convert---I copied all our pictures to our windows 7 laptop and I installed adobe photoshop elements 12 (my bought program)
I wanted to try to convert there first. also I copied our catalog to this computer also. Everything was working fine I could see the collections just as they where on the XP computer.
then I tried to convert on the laptop. I believe the error said something about corrupt file, so I gave up that day. Next day I tried to open ADOBE STARTER EDITION 3.2 and it wanted an unlock code, no such code exists. and my copy of Elements 12 turned into a trial version which has expired. So I am a little hesitant to try to convert on the XP computer and mess up the existing catalog,
unless there is a fool proof way. I have tried manually making collections/ albums on Windows 8.1 and PHOTOSHOP ELEMENTS 12 and coping pictures into the new albums. sloooow!!
I probably have about 4500 pictures and 150 collections/ albums to go. So any suggestions would be appreciated.

Photoshop 7 will not recognize my fire wire drives as scratch disks

Photoshop 7 will not recognize my fire wire drives as scratch disks.
Using Photosop 7.0.1 & Mac OS X Tiger on G4 Tower with AGP Graphics.
Any Ideas?
Thanks in advance,
Tom

The drives need to be formatted as Macintosh HFS+ Extended (not Windows or FAT32, for instance), and you must have full read/write permissions to them.
Otherwise, Photoshop will not let you select them as scratch disk drives. Of course, formatting will completely erase the entire drive, so if you have anything on them you need to keep, you'll need to back it up first.
If necessary, do a Get Info (Command I) on the icon of the drive in the Finder and check "Ignore Ownership on this drive"; but first the drive needs to be formatted as Macintosh Extended.

My photoshop cs5 will not recognize raw photos from my canon eos 70d

my photoshop cs5 will not recognize raw photos from my canon eos 70d

No. DNG is a RAW format. There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc. Personally I never noticed the difference, but perhaps some do. There is no impact to the image quality, you have just as much post production freedom with DNG.
I did it for a couple years before upgrading to CS6. It's an extra step, but you get used to it and it's not a huge deal. I would put my card in my reader, and download to a temp file. While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ]. Then I would run the RAW to DNG converter, and drink my beer. It was usually done before my beer (if not I got another). I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
Another option is to get Lightroom and use that for your developing. You can then send over a TIFF file with the edits. But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?).

Adoble photoshop elements does not recognize printer although other software programs do print...

Adobe Photoshop Elements does not recognize printer..error message says you must install printer. Other software does print documents.

Try opening an image in full edit, then press crtl+p
Wait for the print dialog to open and try to select your printer by clicking the dropdown menu.

The Ethernet Port will not recognize that my line is plugged in... Help!

Hello... My modem recently died on me and my internet service provider installed a new one. Since then, my Airport will not recognize the ethernet line coming from the modem. I have access to the internet only by a direct plug-in to my mac from the modem.
I have shut it down, restarted, re-installed and keep getting the same response from the airport: no ethernet found.
Any ideas on how I can get my wireless back?
Thank you in advance.

Try turning off the wireless on your computer and temporarily connect it to one of the LAN <-> ports on the AirPort Extreme to see if you can get an Internet connection that way.
What happens when you try this?

I have mac 10.9 version. Adobe photoshop Elements 12. I just got a new camera Nikon D4S. Photoshop elements will not upload/import my raw photos. i get a message that can not complete my request because the file appears to be from a camera model which

I have Mac version 10.9. Adobe elements 12. New camera Nikon D4s. I have uploaded DNG plug in 8.4. Tried to convert my raw photos and it still does not work. How can I upload raw photos taken with my Nikon D4S so that I can edit these photos?

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

Photoshop elements will not open

My photoshop elements 10 and my phoposhop CS3 will not open at all they go to a black screen.Three days ago it opened. before that it had not opened for several days. Before the problem with it not opening, it would not load photos to edit them. I have tryed to look at the compatability, etc.
I am afraid to delete and reinstall. When I look in my photos I do not see the photos that I have edited. HELP

Start PSE to get to the Welcome screen.
Hold down the Ctrl + Shift keys and click Organizer. Keep holding down the keys until you see the Catalog window.
Select your catalog and click Repair. Select “repair anyway” even if PSE doesn’t find problems.
Then for good measure, click Optimize.
If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog. If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
Check for Task Manager and end the "ElementsAutoAnalyzer.exe" file and then try.
- Try launching Organizer directly from the exe with Admin rights.
Some more solutions once you try these are here http://forums.adobe.com/message/4994459#4994459
Thanks,
Gaurav

Photoshop Elements will not let me log in with my Adobe account.

I have had no issue installing, activating, and logging in with the Adobe Premiere Elements program. However, when trying to log in to Adobe on Photoshop Elements, a window pops up and says that there is no internet connect (when obviously there is) or my computer time has been set wrong (which I triple checked). I have no idea why it will not let me log in.

Are you seeing a login screen that looks like this?
http://community.skype.com/t5/Windows-desktop-client/Logging-on-to-one-thing-not-the-next/m-p/366615...

Adobe Photoshop Elements will not come up from the welcome screen

When I am in the welcome screen and press the organizer or edit button the program will not load and come up.

Can you try lanching them direcrlty :
Mac - Navigate to 'Go->Applications/Adobe Photoshop Elements 11->Support Files->Adobe Photoshop Elements Editor'. Double click 'Photoshop Elements Editor'.
Win -
Win x64: C:\Program Files (x86)\Adobe\Photoshop Elements 11 Win x32: C:\Program Files\Adobe\Photoshop Elements 11
Right click on 'PhotoshopElementsEditor.exe' and select 'Run as Admin'.
If still an issue try this for Editor:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
make sure the exe is not stucked in task manager by going in task manager and check for PhotoshopELementsEditor.exe file. Stop the process and try.
Thanks,
Garry

Adobe photoshop elements will not work?

Adobe photoshop elements 8 will not work?

What doesn't work, what happens when you try, and what operating system?

My new Adobe Photoshop elements will not let me register. What do i do? Also, the disc will not release from my computer.

I just purchased Adobe Photoshop elements 10. I just installed it. it works, but when I go to register it, it refuses me.
A;lso the Photoshop 10 disc is stuck in my computer. it will not eject.
Please help
Judith.

Photoshop is a program, Adobe is the company that sells it.
Somebody taking your money does not proof you have purchased a legitimate license …
While this may well have nothing to do with your issues you should post on the proper Forum and provide other relevant information (OS, hardware, …).

I am using photoshop elements (8) for several years since I upgraded form (2). I am a mac user and just upgraded to yosimite. Photoshop elements will not open. I have tried to make the changes recommended by the Adobe website, but I can not locate them

How can I get photoshop elements to work on my mac with Yosimite??

Yes, that is correct. The organizer is just a database, so your photos are wherever you put them intially. Did you import from iphoto? In that case, organizer does make duplicates (to avoid writing into the iphoto library, which would be a Bad Thing to do). If you didn't specify a location, the copies that PSE uses will be inside subfolders in the Adobe folder in your Pictures folder.

Photoshop Elements will not sync

When I first used my Apple TV, I selected some collections from Photoshop Elements to synch. This worked very well. Now when I go to the Photo tab, and select Photoshop Elements, none of my collections appear there. I can no longer sync any content. I tried reseting the Apple TV, it is still blank under Photoshop Elements. All other functions work fine. Any ideas on how to get it to find my collections?
PC Windows XP

Make sure that the Photoshop Elements files are the correct format. If they're not then you'll have to convert them.
The AppleTV accepts JPEG, BMP, GIF, TIFF, PNG. No other ones.
Hope this helps.
-Newlz

Photoshop Elements 12 will not recognize Perfect Effects 4 as a plug-in

Similar Messages

Maybe you are looking for