インストールできない(Photoshop Elements 12.win7)

インストール終了間際で以下のエラーメッセージが出てインストールが中断され、
強制的に再起動されてしまい、結果的にインストールがされていない状況です。
<エラーメッセージ>
An error occurred during the installation of assembly
component
{97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}.
HRESULT:0x800736B5.
(この文言の次の「OK」ボタンを押すと強制的に再起動されてしまい、
「予期しない再起動がされました」などのメッセージが再起動後に出る。)
PCはWindows7の64bit版です。
WEB上に載っている対処方法を色々試しましたが同じ結果になります。
(C:\Program Files内やその他指定フォルダ内のAdobeフォルダを全て消す、
一時ファイルを削除する、セキュリティーソフトは止める、その他指定のファイルを消す……など)
どうすれば良いでしょうか?

はじめまして、落ち武者です。
まず表示されているエラーについては
Windows 側から表示しているエラーメッセージですね。
色々な要因が考えられるので、具体的な原因の特定をする事はできませんでした。
ただ、Adobe ではない製品のサポートサイトとはなりますが
参考となりそうなページがあったので、ご紹介させて頂きますね!
Sophos Anti-Virus for Windows: インストール時のエラー 1935
※ 手順の1から順に行って頂くのが良いかと思います。
また、パソコン自体が不安定になっている可能性も考えられるので
ご利用のパソコンメーカーや Microsoft へ「エラーメッセージが出て、アプリのインストールが出来ない」と
一度ご相談されるのも、一つ方法になってくるかと思います。
少しでもご参考となれば幸いです。

Similar Messages

  • How to install photoshop elements 2 on win7 64bit?

    After clicking on install photoshop elements from the autoplay menu absolutely nothing happens.

    bromar4transfo
    I just saw you message to R_Kelly which was posted after I had suggested your use of Windows XP Mode.
    10. bromar4transfo,  
      24-Feb-2014 14:50    in reply to R_Kelly 
    Report
       win7 home premium  300gb hdd with 230 gb space left, turnef off virus scanner first, waited 1/2 hr, didn't work.
    The link to which I referred you to pointed out the versions of Windows 7 which supported use of Windows XP Mode. The home premium is not one of them. So, my check list at this time should not be pursued under those circumstances.
    Do you have any opportunity to upgrade your Windows 7 Home Premium 64 bit to Windows 7 Professional?
    Windows 8 is not going to be an out since the Windows XP Mode is a Windows 7 perk for just selected editions of 7.
    Later tonight I am going to try to install Photoshop Elements 2 on Windows 8.1 64 bit and see what happens. I was able to get Photoshop Elements 3 installed there.
    More later.
    ATR

  • How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

    how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
    Thank you.

    Hi ,
    Your windows is 32 bit or 64 bit .
    If win 7 32 bit
    Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
    If win 7 64
    PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
    Thanks,

  • Gibt es einen Update auf win7/64 für Photoshop Elements 1.0

    gibt es ein update auf win7/64 für Photoshop Elements  1.0

    Nein. Macht ja auch keinen Sinn. Deine Software ist über 10 Jahre alt.
    Mylenium

  • Install of Photoshop Elements 9 on Win7 x64 fails

    Hi @all,
    we want to install Photoshop Elements 9 win german Volume license on Win7x64 Enterprise silently on our clients.
    During testing, the following thing occurs:
    Install ends clean, seee the  eventlog entries: (I´m sorry for the german language)
    Produkt: Adobe Photoshop Elements 9. Ein Neustart ist erforderlich. Die Installation oder Aktualisierung des Produkts erfordert einen Neustart, damit alle Änderungen in Kraft treten. Der Neustart wurde auf einen späteren Zeitpunkt verschoben.
    Eine Windows Installer-Transaktion wird beendet: C:\temp\AdobePhotoshop\V9_WIN_deu\PSE 9\Adobe Photoshop Elements 9.msi. Clientprozess-ID: 2708.
    Für Windows Installer ist ein Neustart des Systems erforderlich. Produktname: Adobe Photoshop Elements 9. Produktversion: 9.0. Produktsprache: 1033. Hersteller: Adobe Systems Incorporated. Typ des Systemneustarts: 2. Ursache des Neustarts: 4.
    Product: Adobe Photoshop Elements 9 -- Installation operation completed successfully.
    Das Produkt wurde durch Windows Installer installiert. Produktname: Adobe Photoshop Elements 9. Produktversion: 9.0. Produktsprache: 1033. Hersteller: Adobe Systems Incorporated. Erfolg- bzw. Fehlerstatus der Installation: 0.
    But, when I want to start Photoshop during the installed desktop icon, the file wouldn´t be found.
    When I have a look to the installation folder, there is no
    %drive%\Program Files\Adobe\Elements 9 Organizer  folder, on which the ...elements.exe must resist.
    I´v tested the installation on different machines and more times - every time the same.
    Here are some informations about my installation:
    I´ve created a application.xml.override with the following content, located in the installation folder:
    <?xml version="1.0" encoding="utf-8"?>
    <Configuration>
    <Payload>
    <Data key="EULADelay">0</Data>
    <Data key="EULA">Suppress</Data>
    <Data key="Registration">Suppress</Data>
    <Data key="Updates">Suppress</Data>
    </Payload>
    </Configuration>
    I´ve modified the setup.ini file to change the features, set the license number and want to write a log file -> the log file also didn´t exists.
    [Launch]
    Count=14
    Lang0=0009
    Lang1=0007
    Lang2=040c
    Lang3=0011
    Default=0009
    EnableLangDlg=NO
    CommandLine0=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1033.mst /qb- /norestart /l*v c:\windows\temp\Adobe-Photoshop-Elements_Install_enu.log ELEMENTS_EN_US=1 ORGANIZER_EN_US=1
    CommandLine1=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1031.mst /qb- /norestart /l*v c:\windows\temp\Adobe-Photoshop-Elements_Install_deu.log ELEMENTS_DE_DE=1 ORGANIZER_DE_DE=1
    CommandLine2=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1036.mst /qb- /norestart /l*v c:\windows\temp\Adobe-Photoshop-Elements_Install_fra.log ELEMENTS_FR_FR=1 ORGANIZER_FR_FR=1
    CommandLine3=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1034.mst /qb- /norestart /l*v c:\windows\temp\Adobe-Photoshop-Elements_Install_esp.log ELEMENTS_ES_ES=1 ORGANIZER_ES_ES=1
    [OEM]
    OEM=
    SERIALNUMBER=xxx-xxx-xxx-xxx-xxx-xxx
    DISABLEEMSFEATURES=1
    DISABLEOLSFEATURES=1
    WATCHSERVICE=0
    MANUAL=
    REBOOT=NO
    [en_us]
    Title=Adobe Photoshop Elements 9 - Setup
    OSErrMsg=Your system does not support the minimum operating system requirement. Installation of Photoshop Elements 9 is supported on Windows XP, Windows Vista, Windows 7 Operating Systems.
    AdminUserErrMsg=Pleas...............
    I also have tested the installation from a local source, a restart after the installation, set up the %windir% variable forc:\window.....
    What can cause the poblem?
    Thanks for your answers

    Hi Ankush,
    what a speed for an answer, wow. Very nice.
    OK; at this time, I can´t get support thru the Adobe enterprise support team; we want to buy support, but later .... (not my opinion...)
    So, I installed/changed the PSE described in the following document:
    http://kb2.adobe.com/cps/861/cpsid_86149.html
    but in the setup.ini file, I want to choose to write down a log file for troubleshooting (like here), install silent (without /qb- oder /passive, the installation is not silen -normaly...) - why not? In the serup.ini file, I found the msiexec parameters inside the setup.ini, why do not here a change to have a log for installation....like described for older PSE versions....
    Now, I´ve changed the setup.ini file back to its original state (see below) and only use the steps from the doc above...
    [Launch]
    Count=14
    Lang0=0009
    Lang1=0007
    Lang2=040c
    Lang3=0011
    Default=0009
    EnableLangDlg=NO
    CommandLine0=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1033.mst ELEMENTS_EN_US=1 ORGANIZER_EN_US=1
    CommandLine1=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1031.mst ELEMENTS_DE_DE=1 ORGANIZER_DE_DE=1
    CommandLine2=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1036.mst ELEMENTS_FR_FR=1 ORGANIZER_FR_FR=1
    CommandLine3=msiexec /i "Adobe Photoshop Elements 9.msi" TRANSFORMS=1034.mst ELEMENTS_ES_ES=1 ORGANIZER_ES_ES=1
    [OEM]
    OEM=
    SERIALNUMBER=
    DISABLEEMSFEATURES=1
    DISABLEOLSFEATURES=1
    WATCHSERVICE=0
    MANUAL=
    REBOOT=NO
    [en_us]
    Title=Adobe Photoshop Elements 9 - Setup
    OSErrMsg=Your system .................
    And I use the following setup command to start the installation:
    (like the doc from adobe)
    Start /wait C:\"Adobe Photoshop Elements 9"\Setup.exe /UL1031 /V"SERIALNUMBER=1111-1111-1111-1111-1111-1111"
    It´s starts the installation completely silent in background - good; ->  I want to have a log file for the installation; how can I setup this thing?
    The installations runs...
    The Installation is done, result is 0 -> and I can start Elements thu the desktop icon-> very good.
    mmmh. When I have a look in the event logs, I can see, there there many install entries for more products, like MS VC++ and Element programs as I can see thru my install tests before....I think, there is the problem. The first installation only installs the Photoshop editor, not more....
    Now: But, when I start Elements, It asks me to change the region/country - can I setup these thru the installion process, the my user don´t need to setup this?
    The main goal is done (done? is this right?), when I can have a log and no more region/country settings, it would be perfect!
    Thank you

  • Installing Photoshop Elements 2.0 on Windows 7 64-bit

    Yes it's an old version but it will work on Win7 64-bit SP3, and it isn't feature-neutered and UX-impaired like subsequent versions of Photoshop Elements.
    Yes copy the Photoshop directory (the one with setup.exe) from install disc to your desktop.  But before doing anything else, do this:
    Make sure Internet Explorer is turned off under Control Panel:Programs:Programs and Features:Turn Windows Features On/Off  (use Chrome or FF instead - you know why)
    If it's enabled turn off IIS as well.
    Voila: Elements 2.0 installs and runs great on Win7 64-bit.  In fact it runs screamin' fast, especially with > = 4GB of memory.

    Can I run Elements 2.0 on windows 8.1?

  • Trying to install 64 bit premier elements on win7 64 bit. never works

    trying to install 64 bit premier elements on win7 64 bit. never works

    What errors are you getting? Have you downloaded the software or installing via disc.
    In case of a disc, the disc 2 is meant for Windows 7 64 bit.
    Please refer : http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html

  • 0pen with Photoshop elements 10  dont load photos

    Hello,
    In Win7 ultimate when i try to open raw or jpg photos clicking on right key of the mouse "open with" Photoshop elements 10, the
    program start but never image is loaded. This issue is in Italy version. Please tell me is happen also in your version,is so  this may be
    a bug. Tank you.

    Hello,
    I am using English version of PSE10 on same plateform but i am facing this type of issue.
    I can suggest you to make PSE10 as default program to open any image.
    To make PSE10 as default program :- Do Right click on image -> open with , then click browse then navigate to PSE .exe file and select it.
    This may solve your problem.
    Cheers,
    Sam

  • Adobe photoshop elements 11 stopped working.

    Photoshop elements 11 suddendly stopped working. I have worked with the program the last couples of years and never had a issue until now.
    I have not change any settings in my computer. Windows 7 (64).
    I have read in other forums, it may be caused by a windows update or antivirus. What do I need to do to have my software work again? I would really appreciate if you can help me resolving this issue.

    I have exactly the same problem.  After useing Adobe Photoshop Elements 10 for more than a year, I get the same error message after I chose the edit option.  I have not used the program in a few weeks, so I cannot guess what other program was updated that might have affected the performace of Photoshop.  But, Photoshop does work in Safe Mode.  So, there is something that suddendly is in conflict.  Unfortunately for me, the first things I tried were to remove and reinstall Photoshop a few times.  Now my restore system option of Win7 is not available for a date far enough in history to get Photoshop to work again.  I have removed all software that used to open at Startup.  I have tried to open Photoshop as an administrator and also with various compatibility settings to now avail. I have checked the installation logs and there are no errors.
    Seeing that the prevous forum post is from February 2014, I am assuming that no one viewing this forum is going to help me with this problem either, but I can try to remain optimistic.  I'm out of other options for getting help.  I'm not excited by the idea of reinstalling all my software again and the hours of my time that will take, especially when I don't even know that this will help.

  • Can't download Premiere/PhotoShop Elements 11 package

    When I click on the download link in my order, I get a page telling me 'Please use a supported browser'.
    I'm using IE10 on Win7 64 bit.
    Where am I going wrong?

    Squash306
    Another "watch out for" which may or may not affect your download of those tryouts of Photoshop Elements 11 and Premiere Elements 11.
    I used Mozilla Firefox for such a download only the other day.
    I did not run into any browser issues but I did forget about the typical recommendations to shutoff the antivirus and firewalls such tasks.
    My only problem with this download was at the beginning.
    (a) There was request to download and install an updated version of the Adobe Download Assistant. I went through the process only to be informed that I had the latest version.
    (b) Moving forward, when asked to set up a folder on my computer for the download, I created a folder on the Desktop....then I was notified that my computer did not have enough RAM for the download...in fact, I have 8 GB installed and about 5 to 6 GB available. When I created the folder on Documents instead of Desktop, I did not get that message, and the download and subsequent installation went without issues.
    Please update us on your progress when you get a chance.
    Thanks.
    ATR

  • Cannot "Open With.." in Photoshop Elements 10

    I've upgraded from PE9 to PE10 and then uninstalled PE9. When using PE9 (and PE8 before it) I could right click on a photo and select "Open with - Photoshop Elements 9". Since upgrading to PE10 I am unable to do this i.e 'Photoshop Elements 10' does not appear in the "Open With.." list. I am using Win7 64Bit.

    This is what I found. The basic problem is that Photoshop Elements 10 is not properly registering itself when it installs. I upgraded from v9 to v10 so that may have something to do with it. If you do what the solution suggests then it will set up the registry entries so that “Open With..” will include PE10. However if you have an automatic registry cleaning program (I have System Mechanic) then it will soon delete those registry entries as the program referenced (i.e PE10) is not registered. Having discovered this I then set System Mechanic to ignore the appropriate registry entries and thus it does not delete them. “Open With… PE10” has since worked fine.
    Regards, Malcolm LLoyd.
    Skype Name:  Mal.LLoyd

  • Photoshop Elements 4.0 compatability issues with Vista

    How to resolve compatability issues when loading Photoshop Elements 4.0 with Vista operating system. The Software came with Canon Canoscan 8600F scanner.

    Nope, I'm afraid that's not gonna work out. The best you can hope for is trying compatibility modes, but otehrwise I don't think there is any way to run this 7 or 8 year old software on Vista or Win7/ Win8 for that matter...
    Mylenium

  • Photoshop Elements 10 - Corrupt Display

    Good evening -
       I finally broke down and bought a new DSLR camera.  Now, I only need an editing software to tighten up the images.  The only problem I am having is that Photoshop Elements 10 (and 9) GUI does not want to play well with my current rig. 
    Key components:
    1) Win7 Ultimate 64
    2) eVGA 460 1GB
    3) Matrox 3H2Go with 3x22" lcds
      No matter what I try to do, the menu bars are corrupt upon opening PE.   I have tried eliminating any desktop themes, GPU driver is most current, hardware acceleration off etc etc.
    Any thoughts as to what might be going on?  I am sure it's related to scaling of the GUI with the Matrox Triplehead display.   It's the only program I have issues with in terms of working in this 3 monitor setup.
       I have 29 days to nail this issue before I have to wait until release 11 comes out
    Notice the menu bar is transparent?   I am looking for any suggestions.
    This is why I run in x3 monitors...so don't say use one monitor

      The editor prefs often get corrupted. You may need to rebuild the editor preferences to resolve any conflicts.
    Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or hold down the keys whilst double clicking on PhotoshopElementsEditor.exe
    You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
    Click on Yes
    Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.
     

  • HP Deskjet 9650 with Photoshop Elements 7 and Windows 7 not printing

    I have a new Windows 7 computer and installed Photoshop Elements 7.0 on it, which works fine, except I cannot print.  I did the installation instructions to use the alternate driver 9800 and can print 8 1/2 X 11 Word documents, but I cannot print a 12X12 scrapbook page to save my soul.  The resume print button keeps blinking and it spits it out blank.  Any help?
    I hope I do not have to get a new large format printer.

    I just accomplished this without any real problems and am now running with my same license on the newly rebuilt PC.  Here is what I did ...
    Originally my PSE7 configuration was set up last year on new Intel I7-based PC running Vista 64 bit version with a retail copy of the PSE7 software, i.e. not the upgrade version.  Once that was setup I imported my catalog from the older Adobe Photoshop Album on my previous system.  That put me at the place you are now, i.e. PSE7 on Windows Vista.
    For this upgrade I puchased the upgrade version of Windows 7 and an additional second disk drive.  I installed Windows 7 onto the clean drive, giving me a dual-boot system for either OS.  While booted on the Vista drive, I used the easy-transfer method to write a backup of my Vista files to an external disk drive.  I then rebooted into the Windows 7 drive and used the Easy-transfer tool to reload the files from the external drive. (note; this easy-transfer included >200GB of music/video/image files so it ran for several hours for each phase of the transfer)
    Once I verified the directory structure on the new Windows 7 setup, only then did I do the installation of PSE7.  That wnet flawlessly and relicensed without any problems.  Next I was able to open up my catalog in organizer and all of the images were intact.  Since then I have had no issues with the configuration.
    So bottom line is you should be fine doing the upgrade regardless of whether you do the upgrade like I did to a new drive or an in-place upgrade overlaying your vista environment.  For the in-place upgrade I would strongly recommend you still do a backup of all of your images and their associated catalog(s) to an external drive.  Win7 is a vast improvement over Vista so I'm sure you won't regret the upgrade but I don't trust any vendor's software upgrade procedure, especially Microsoft so please do the backup first.

  • Unable to access certain areas of Photoshop Elements 7

    I would be really grateful if someone could help me with these problems I am having with Photoshop Elements 7.
    1. On start up I have never been able to access the Learn More option.
    2. I can't access Help in editor or organiser. Error Message: The requested help topic could not be found. Please re-install Photoshop Elements to fix this problem. I have uninstalled it from Add or Remove Programs and Search, and re-installed it three times, but the problem is still there.
    3. Unable to open Organiser, on my first installation I could. Error Messages: Online Services could not be initialzed. Please re-install press Ok to continue without Online Services.
    Failed to open catalog. The default could not be found. Please open or create a different catalog.
    4. When  I try to access Inspiration Browser I get this, there is no icon for it. Error Message: The Elements Inspiration Browser works best when launched directly from Adobe Photoshop or Premiere Elements. Please open any of these software and launch Elements Inspiration Browser from there.
    5. Get Videos and Photos from camera or card reader to open the Photo Downloader, were visible when I first installed Elements 7, since I've re-installed it, it has not appeared.
    I am able to open Edit, but can't save photos.
    I hope someone out there has the solution to my problems. Thank you in advance for any assistance provided.
    Take care,
    Ellieyah.

    If you use Vista or Win7 you MAY have a permissions problem
    Try RIGHT clicking the program icon and selecting Run as Administrator

Maybe you are looking for

  • How to get fourthly row (row4) first column value (col1) in matrix

    Hi to all, In FMS, how to get fourthly row (row4) first column value (col1) in matrix in document. select $[$38.1.4] But it display the first row Please give me hint. Thank you

  • Set a file properties to hidden

    how to set a file properties to "hidden" in windows?? is there anyway of doing that?? help

  • Change Color for metal furnitures

    Newbie here....I need some advices. Currently I'm designing a laptop cover that comes with a default black glossy color and I want to change it to red, blue, green, pink, and some other finishes. I want to keep the existing glare and surface lighting

  • Condition Type in VA01

    Hello experts, There is a column by the name "Condition Type" in the Sales Order creation (VA01) transaction. Could you please let me know the table in which I can find which sales order is containing which all condition types? I am totally a technic

  • Function module to update Credit status in Delivery

    Hi, Is there any function module or BAPI to update the Credit status for Delivery (Outbound) in transaction VL02N.