PhotoShop Elements 4  on old XP drive  I want  it all on new harddrive using W7

I started this off but
I gave wrong info and completely confused every one especially myself.
I updated my computer and installed a new hard drive now my C drive. W7
All my photos with all the necessary information is on the old hard-drive XP
All I want to do is bring every thing across to my new Hard drive which uses W7
I have the original CD of APE4.0
I am far from a whiz kid but I can follow a step by step instruction providing it is clearly laid out.
I also have all the photos in MS My Pictures. in W7
OR do you think I should contact Adobe Technical Service per Phone for help.
OR do I to buy the latest Elements that will  work with W7 and what ever comes after that and transfer all my photos from  My Pictures  
This will be my Aussie winter project.   I am not worried about the cost.     In fact I would gratefully pay some on to do it for me if I could find some one locally   
I still would love to be able to view my old Elements 4 to get some information from some of the photos if that is possible.
Thanking you in advance
Keith

More Confusion
All  the photos are only on my "E"  drive in  "My Pictures"    which was my original XP "C"  Drive
They were supposed to be moved across (By computer installation technician) to the new "C" drive but were not
I do have a short cut to them on my desk top.    Please dont ask me how I done that because I just cannot remember.
W7 has a fantastic search and there is no Adobe elements there at all   But there is the Elements how to etc which make me think it is there some where  but where??????? is the big question.
I know I found that big file but how and where ???????????
Keith

Similar Messages

  • How can I deactivate Photoshop Elements 5.0 on hard drive that will not boot?

    I have Elements 5.0 loaded on a hard drive which will no longer boot. I have a new hard drive and can access the old drive as an extra internal hard drive. I cannot use Photoshop, so I was thinking I need to deactivate the copy loaded on the old hard drive and reload it on the new hard drive. Is this the best solution? If so, how do I deactivate? When I start up the editor, it does not have an option for deactivating as I read about in another post. Under the help menu, there is a grayed out option for Registration. After a few seconds, a window appears saying there is a problem with my serial number and the application closes.  Also, I would like to load Photoshop on a laptop later, so I do not want to waste one of my allowable loads. I would appreciate any help.

    Yes, as long as you don't have it on more than two computers at once you're in compliance with the license. (Back in the days of PSE 5 adobe worked more on the honor system.)

  • I have old video clips in Photoshop Elements Organizer v12 for Mac.  I want to divide some of those clips in Organizer.  I can do that in Premiere Elements 12 and save them as "Projects" - but how do I get the divided clips back into Organizer?

    I have old video clips in Photoshop Elements Organizer v12 for Mac.  I want to divide some of those single clips into 2 or 3 separate clips, each shown separately in Organizer.  I can divide the clips in Premiere Elements Editor 12 and save them as "Projects" - but I can't find any way to get those divided clips back into Organizer.  Does anyone know whether that can be done?  Many thanks for your thoughts.

    What about Google Drive? And just share the folder with the family members.
    Erick

  • Need to reinstall Photoshop elements on my iMac - hard drive crash and do not have a back-up copy.  How do I get another copy?

    Need to reinstall Photoshop elements on my iMac - hard drive crash and do not have a back-up copy.  How do I get another copy?

    Unfortunately, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • I get Deactivation Error 194:3 when trying to deactivate Photoshop elements from an old PC.

    I have Photoshop elements on an old PC, I want to deactivate it to set up on my new PC.
    I keep getting Error 194:3 whenever I try to deactivate.

    Contact support to reset activations.
    Mylenium

  • How can I save photos that I have modified in Photoshop Elements to my computer hard drive?

    How can I save photos that I have modified in Photoshop Elements to my computer hard drive folders?

    When finished editing click File->Save/Save As and you can either overwrite the original file or rename it and save as new file keeping original intact.
    You can find more info on saving and various settings here http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fda.html#WS287f927bd30d4b1f89cffc612e28adab65-7fd7
    Thanks,
    Garry

  • I need help in re-installing Photoshop Elements 12 on my hard drive.

    I need help in installing Photoshop Elements 12 on my hard drive. While trying to install program, I get a message that reads "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation"
    I have no clue what this means , all I want to do is re install program on my hard drive.
    Any suggestions ?

    Kglad
    I clicked the link you supplied and still can't figure out how to attach a screen shot.
    However I found out that I did leave out a part of the screen shot message when I
    I sent it to you. Here is the message in full. The part I left out is in bold. The reason
    I missed it is that it was in the top of the blue border surrounding the text.
    Licensing for this product has stopped working
    This product has encountered a problem which requires that you restart your
    computer before it can be launched.
    If you continue to see this message after restarting your computer, please contact
    either your IT administrator or Adobe technical support for help, and mention the
    error code shown at the bottom of this screen.
    This is the total message verbatim, If this does not help I thank you for trying.
    Dougbrurob

  • I have photoshop cs6 om a pc. My coumper guy took my old c drive and cloned it to a new oneand installed it. now when I go into  bridge it won't let me do any editing. I can't put stars or colors on the photos.

    I have photoshop cs6 on a pc. My computer guy took my old c drive and cloned it to a new one and installed it. now when I go into  bridge it won't let me do any editing. I can't put stars or colors on the photos.

    >I am trying to load my new programs onto this laptop
    Actually, no you're not. You're trying to load old programs on this computer - programs that are based around the old (dead?) Mac OS 9, not Mac OS X.
    The main problem is that Mac OS X no longer comes with Mac OS 9. If you want to run Mac OS 9 applications you can, but you'll need to source a copy of Mac OS 9 and install that before you can. Off hand I don't know of any sources for Mac OS 9.x. Apple no longer sell it. eBay might be an option.
    Either that, or just use Mac OS X applications. You'd probably prefer that anyway.
    Finally, as an aside, this doesn't really have anything to do with AppleScript, so posting in the appropriate forum might get you better luck.

  • How do I  install Photoshop Elements 10 to a secondary drive?

    How do I  install Photoshop Elements 10 to a secondary drive? I have a solid state drive as the primary drive and a secondary drive that has much more storage where I would like to install PSE, but there is no option to pick the drive when you install.

    Which operating system are you using?  There is typically an option to select the installation location.  Keep in mind though that there are many support files which will permanently need to be installed on your Operating System drive.  In addition temporary files will also need to be installed during the install process. 
    If your SSD is so low on space you may want to consider getting a larger drive which can accomodate the operating system and applications installed on the same drive.  You are also loosing many of the performance gains of the SSD by having your applications still installed on a standard hard drive.

  • How can I download Photoshop elements 12 without a DVD drive?

    How can I download Photoshop Elements 12 without a DVD drive?  I am using a MAC

    Hi Garden ,
    You can download the trial verison of Photoshop Elements 12 and activate it with your serial number
    Download Link - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
    Let me know if you need more info.
    Thanks!
    Eshant

  • How do I transfer Photoshop Elements 10 from old computer to new laptop

    How do I transfer Photoshop Elements 10 from old computer to new laptop?

    You need to installed it in the same way as you did on old machine.
    If you like to save one instance of the license then please do de-activate while uninstalling.
    Or if you have already used your "Two" instances of installation then you must need to de-activate one of the machine while
    uninstalling so it will release the instance for new installation.

  • Transferring photoshop elements from an old windows7 laptop to a new windows 8.1 laptop

    I recently had to upgrade from a laptop running Windows 7 to a whole new laptop running Windows 8.1  I had been running Photoshop Elements only a few months and was still learning all that it can do.
    It would be another six months before I can buy a whole new copy of Photoshop Elements.
    Is there a way I can upgrade that is do-able without starting over?

    gkiltzva wrote:
    I recently had to upgrade from a laptop running Windows 7 to a whole new laptop running Windows 8.1  I had been running Photoshop Elements only a few months and was still learning all that it can do.
    It would be another six months before I can buy a whole new copy of Photoshop Elements.
    Is there a way I can upgrade that is do-able without starting over?
    The original license is for two installations.
    Have you tried installing PSE on your new computer? If so, what happens?

  • I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

    I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

    Does your Mac have ThunderBolt ports?
    There are ThunderBolt to FireWire adapters.
    As far as I know there are no FireWire to USB 3 adapters.
    Allan

  • How do I import Bookmarks from my old hard drive to the one in my new mac?

    How do I import Bookmarks from my old hard drive to the one in my new Mac? The old drive is installed in Bay 2 of my new Mac.

    Hi
    Home/Library/Safari/Bookmarks.plist is the file you want. Use a copy, just in case & do it with Safari quit.

  • In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    Thank you, that was perfect!
    Yoni

Maybe you are looking for

  • How to find No. of Saturdays,Sundays in Specified Dates?

    Hello Gurus, I have scenario where in user will provide me Two dates for instance say 1-Jan-2003 to 1-Jan-2004, Now I want to find out what are the dates in this specified range which has Sundays & Saturdays ? Is it possible to do it in Simple SQL qu

  • Problems with the camera on the iPhone 5 when taking a picture...

    Hello... Could someone tell me what I should do to get the camera on my iPhone 5 working normal again. From one day to another i tried to take a picture and it does not focus at all! it keeps the image blurry. I reseted the iPhone 3 times and nothing

  • RFC from XI to R/3

    Hi, when our XI system sends two RFC to R/3 at the same time, only one of them is prosessed. The second just disapears. I cant find any traces in R/3. Anyone? Thanks.

  • How can I close a firefox tab in my Visual C++ code which I have created

    I have written a code to open a specific link in firefox. It open in a new tab, but when I try to terminate that process through code, it doesn't work. I have assume the new tab to be a process, I even tried to delete the thread but I an not able to

  • Stateless session bean in clustered environment

    Is there any option in ejbc (Stateless Session Bean) for clustered environment?           Do I have to take care for clustered environment?