Photoshop Elements 5.0 doesn't start after reinstallation

On my Windows 7 system was PE 5.0 up and running. Due to a system error I needed to Recover the system and afterwards réinstall all programs, including PE 5.0. Th installtion went correct, but the prgram doesn't start I've removed all temp internet files, but that doesn't help. What do?

I didn't have the PSE 5,02 patch installed. But when I did, I received the following error message:
Setup cannot find Adobe Photoshop Elements 5.0.
Please re-install Adobe Photoshop Elements 5.0 before applying this update.
Setup will be aborted..
I re-installed PSE 5.0 again (tyherefore I needed to delete my Temp internet files, before I coulkd install it). The installation seemed to be right, but I still can not strat the program (no error message) and I can't install the patch (same message)

Similar Messages

  • Photoshop Elements 11.0 doesn't start.

    After download of Photoshop Elements 11.0 on hewlett packard XP computer, it will not run because ".exe" file cannot be found.  Why not?

    Check the system requirements. that error indicates that you are not on Service Pack 3 as required for running on win XP.
    Mylenium

  • Photoshop elements (photo editor) does not start

    Photoshop elements (photo editor) does not start after replacement of the mainboard of the computer.
    We uninstalled the software and reinstalled it but it still refuses to work.
    System is Windows7 64 bits

    I have the same problem, does no one from Adobe look at this forum? I have done the mentioned things and nothing works. I am trying to get a project done and this very frustrating. I too should have gone with a Mac

  • Photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1

    photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1
    can someone help me with this issue?

    Two suggestions:  the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements.  Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1.  I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

  • [SOLVED] Xorg doesn't start after upgrade to 1.17.1

    Archlinux i686
    Intel Core 2 Duo 6600
    01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
    After following upgrades:
    [2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
    [2015-02-26 03:27] [ALPM] transaction started
    [2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
    [2015-02-26 03:28] [ALPM] transaction completed
    [2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
    [2015-02-26 03:29] [ALPM] transaction started
    [2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
    [2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
    [2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
    Xorg doesn't start after reboot and I found following kernel message:
    kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
    and /var/log/Xorg.0.log looks like this:
    [ 5.591]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 5.591] X Protocol Version 11, Revision 0
    [ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
    [ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
    [ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
    [ 5.591] Build Date: 22 February 2015 12:52:47PM
    [ 5.591]
    [ 5.592] Current version of pixman: 0.32.6
    [ 5.592] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
    [ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 5.598] (==) ServerLayout "ServerLayout0"
    [ 5.598] (==) No screen section available. Using defaults.
    [ 5.598] (**) |-->Screen "Default Screen Section" (0)
    [ 5.598] (**) | |-->Monitor "<default monitor>"
    [ 5.599] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 5.599] (**) | |-->Device "Device0"
    [ 5.599] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 5.599] (**) Option "BlankTime" "0"
    [ 5.599] (**) Option "StandbyTime" "0"
    [ 5.599] (**) Option "SuspendTime" "0"
    [ 5.599] (**) Option "OffTime" "0"
    [ 5.599] (==) Automatically adding devices
    [ 5.599] (==) Automatically enabling devices
    [ 5.599] (==) Automatically adding GPU devices
    [ 5.608] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 5.608] (**) Extension "Composite" is disabled
    [ 5.608] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 5.608] (II) Loader magic: 0x829e700
    [ 5.608] (II) Module ABI versions:
    [ 5.608] X.Org ANSI C Emulation: 0.4
    [ 5.608] X.Org Video Driver: 19.0
    [ 5.608] X.Org XInput driver : 21.0
    [ 5.608] X.Org Server Extension : 9.0
    [ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
    [ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
    [ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5.613] (II) LoadModule: "glx"
    [ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 5.632] (II) Module glx: vendor="X.Org Foundation"
    [ 5.632] compiled for 1.17.1, module version = 1.0.0
    [ 5.632] ABI class: X.Org Server Extension, version 9.0
    [ 5.632] (==) AIGLX enabled
    [ 5.632] (==) Matched nouveau as autoconfigured driver 0
    [ 5.632] (==) Matched nv as autoconfigured driver 1
    [ 5.632] (==) Matched nouveau as autoconfigured driver 2
    [ 5.632] (==) Matched nv as autoconfigured driver 3
    [ 5.632] (==) Matched modesetting as autoconfigured driver 4
    [ 5.632] (==) Matched fbdev as autoconfigured driver 5
    [ 5.632] (==) Matched vesa as autoconfigured driver 6
    [ 5.632] (==) Assigned the driver to the xf86ConfigLayout
    [ 5.632] (II) LoadModule: "nouveau"
    [ 5.632] (WW) Warning, couldn't open module nouveau
    [ 5.632] (II) UnloadModule: "nouveau"
    [ 5.632] (II) Unloading nouveau
    [ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "nv"
    [ 5.633] (WW) Warning, couldn't open module nv
    [ 5.633] (II) UnloadModule: "nv"
    [ 5.633] (II) Unloading nv
    [ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "modesetting"
    [ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
    [ 5.634] compiled for 1.17.1, module version = 1.17.1
    [ 5.634] Module class: X.Org Video Driver
    [ 5.634] ABI class: X.Org Video Driver, version 19.0
    [ 5.634] (II) LoadModule: "fbdev"
    [ 5.634] (WW) Warning, couldn't open module fbdev
    [ 5.634] (II) UnloadModule: "fbdev"
    [ 5.634] (II) Unloading fbdev
    [ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 5.634] (II) LoadModule: "vesa"
    [ 5.634] (WW) Warning, couldn't open module vesa
    [ 5.634] (II) UnloadModule: "vesa"
    [ 5.634] (II) Unloading vesa
    [ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 5.634] (++) using VT number 7
    [ 5.635] (II) modeset(0): using drv /dev/dri/card0
    [ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [ 5.636] (==) modeset(0): RGB weight 888
    [ 5.636] (==) modeset(0): Default visual is TrueColor
    [ 5.636] (II) Loading sub module "glamoregl"
    [ 5.636] (II) LoadModule: "glamoregl"
    [ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 5.647] compiled for 1.17.1, module version = 1.0.0
    [ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
    [ 5.772] (II) glamor: EGL version 1.4 (DRI2):
    [ 5.786] (II) modeset(0): glamor initialized
    [ 5.786] (II) Loading sub module "dri2"
    [ 5.786] (II) LoadModule: "dri2"
    [ 5.786] (II) Module "dri2" already built-in
    [ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
    [ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
    [ 5.950] (II) modeset(0): Output TV-0 has no monitor section
    [ 6.006] (II) modeset(0): EDID for output DVI-0
    [ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
    [ 6.006] (II) modeset(0): Year: 2011 Week: 8
    [ 6.006] (II) modeset(0): EDID Version: 1.3
    [ 6.006] (II) modeset(0): Digital Display Input
    [ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 6.006] (II) modeset(0): Gamma: 2.20
    [ 6.006] (II) modeset(0): DPMS capabilities: Off
    [ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 6.006] (II) modeset(0): First detailed timing is preferred mode
    [ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 6.006] (II) modeset(0): Supported established timings:
    [ 6.006] (II) modeset(0): 720x400@70Hz
    [ 6.006] (II) modeset(0): 640x480@60Hz
    [ 6.006] (II) modeset(0): 640x480@67Hz
    [ 6.006] (II) modeset(0): 640x480@72Hz
    [ 6.006] (II) modeset(0): 640x480@75Hz
    [ 6.006] (II) modeset(0): 800x600@56Hz
    [ 6.006] (II) modeset(0): 800x600@60Hz
    [ 6.006] (II) modeset(0): 800x600@72Hz
    [ 6.006] (II) modeset(0): 800x600@75Hz
    [ 6.006] (II) modeset(0): 832x624@75Hz
    [ 6.006] (II) modeset(0): 1024x768@60Hz
    [ 6.006] (II) modeset(0): 1024x768@70Hz
    [ 6.006] (II) modeset(0): 1024x768@75Hz
    [ 6.006] (II) modeset(0): 1280x1024@75Hz
    [ 6.006] (II) modeset(0): 1152x864@75Hz
    [ 6.006] (II) modeset(0): Manufacturer's mask: 0
    [ 6.006] (II) modeset(0): Supported standard timings:
    [ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
    [ 6.007] (II) modeset(0): Monitor name: SMBX2331
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
    [ 6.007] (II) modeset(0): EDID (in hex):
    [ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
    [ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
    [ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
    [ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
    [ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
    [ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
    [ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
    [ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
    [ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
    [ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
    [ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
    [ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
    [ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
    [ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
    [ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
    [ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 6.063] (II) modeset(0): EDID for output DVI-1
    [ 6.116] (II) modeset(0): EDID for output TV-0
    [ 6.116] (II) modeset(0): Output DVI-0 connected
    [ 6.116] (II) modeset(0): Output DVI-1 disconnected
    [ 6.116] (II) modeset(0): Output TV-0 disconnected
    [ 6.116] (II) modeset(0): Using exact sizes for initial modes
    [ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.116] (==) modeset(0): DPI set to (96, 96)
    [ 6.116] (II) Loading sub module "fb"
    [ 6.116] (II) LoadModule: "fb"
    [ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.118] (II) Module fb: vendor="X.Org Foundation"
    [ 6.118] compiled for 1.17.1, module version = 1.0.0
    [ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.118] (==) Depth 24 pixmap format is 32 bpp
    [ 6.462] (==) modeset(0): Backing store disabled
    [ 6.462] (==) modeset(0): Silken mouse enabled
    [ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.535] (==) modeset(0): DPMS enabled
    [ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
    [ 6.535] (II) modeset(0): [DRI2] Setup complete
    [ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
    [ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
    [ 6.535] (--) RandR disabled
    [ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.552] (II) AIGLX: Loaded and initialized nouveau
    [ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
    [ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.741] (II) LoadModule: "evdev"
    [ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.744] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.744] compiled for 1.16.2, module version = 2.9.1
    [ 6.744] Module class: X.Org XInput Driver
    [ 6.744] ABI class: X.Org XInput driver, version 21.0
    [ 6.744] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.744] (**) Power Button: always reports core events
    [ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.744] (--) evdev: Power Button: Found keys
    [ 6.744] (II) evdev: Power Button: Configuring as keyboard
    [ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 6.744] (**) Option "xkb_rules" "evdev"
    [ 6.744] (**) Option "xkb_model" "pc104"
    [ 6.744] (**) Option "xkb_layout" "us"
    [ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.780] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.780] (**) Power Button: always reports core events
    [ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.780] (--) evdev: Power Button: Found keys
    [ 6.780] (II) evdev: Power Button: Configuring as keyboard
    [ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 6.780] (**) Option "xkb_rules" "evdev"
    [ 6.780] (**) Option "xkb_model" "pc104"
    [ 6.780] (**) Option "xkb_layout" "us"
    [ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 6.781] (II) No input driver specified, ignoring this device.
    [ 6.781] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
    [ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 6.785] (II) No input driver specified, ignoring this device.
    [ 6.785] (II) This device may have been added with another device file.
    [ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
    [ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 6.785] (**) Option "xkb_rules" "evdev"
    [ 6.785] (**) Option "xkb_model" "pc104"
    [ 6.785] (**) Option "xkb_layout" "us"
    [ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.803] (EE)
    [ 6.803] (EE) Backtrace:
    [ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
    [ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
    [ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
    [ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
    [ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
    [ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
    [ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
    [ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
    [ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
    [ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
    [ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
    [ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
    [ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
    [ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
    [ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
    [ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
    [ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
    [ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
    [ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
    [ 6.814] (EE)
    [ 6.814] (EE) Segmentation fault at address 0x0
    [ 6.814] (EE)
    Fatal server error:
    [ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 6.814] (EE)
    [ 6.814] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 6.814] (EE)
    [ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 6.817] (EE) Server terminated with error (1). Closing log file.
    Note the segfault in modesetting_drv.so!
    Any help?
    I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
    Is it possible that any old config files can cause this?
    EDIT:
    I tried kernel parameter "nouveau.modeset=0" but it didn't help.
    Last edited by cro (2015-02-26 16:33:19)

    Ok, I guess I solved it by reinstalling xf86-video-nouveau.
    Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
    And why does that lead to mysterious error messages and segfault??
    I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

  • Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro...

    Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro, running Mac OS X Yosemite 10.10.2. I don't know why, because Photoshop Elements has always worked properly before today.
    Quite disappointing. I installed the application in May, 2014, downloading it from the App Store, and now I would like to re-install Photoshop Elements.
    Can you help me, please?

    Command + shift + alt... and it works again! Thanks a lot.

  • DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

    Windows DBConsole Service doesn't start after Install OAS F&R-Services
    Hello,
    we have installed:
    WINDOWS Server 2003 with SP 2
    Oracle 10.2.0.1
    OAS F&R Services 10.1.2.0.2
    after Install DBR2 EM / DBConsole did work
    after Install OAS F&R-Service
    the windows-service for DBConsole
    doesn't start, return with an Error Code 2
    see below
    the file named emdbconsole.nohup from output log
    is not to find
    the ias_console does work fine
    OAS F_R-Services do work too
    whats may be wrong ?
    regards
    Norbert
    OracleDBConsoleorclsrvc.log :
    EMDROOT=D:\oracle\product\10.2.0\db_1
    ORACLE_HOME=D:\oracle\product\10.2.0\db_1
    EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    12/14/09 13:13:08 Start pending...
    12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    12/14/09 13:13:09 Tracking process launch...
    12/14/09 13:13:39 dbconsole exited with retCode 2.
    12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
    Edited by: astramare on Dec 15, 2009 8:43 AM

    Hi,
    1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
    cd %ORACLE_HOME%\bin
    emctl stop dbconsole
    2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
    Change line from:
    tracelevel.main=WARN
    To
    tracelevel.main=DEBUG
    Decomment this line, so that the line becomes :
    EMAGENT_PERL_TRACE_LEVEL=DEBUG
    3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
    Change line from:
    log4j.rootCategory=WARN, emlogAppender, emtrcAppender
    To
    log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
    4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
    5. Start the dbconsole and upload the output of each command
    - start the dbconsole: "emctl start dbconsole"
    - issue "emctl clearstate"
    - status the dbconsole: "emctl status dbconsole"
    - check the status of the agent until it comes up: "emctl status agent"
    - force an upload: emctl upload
    6. Check If you are able to view the dbconsole Page & login
    check below logs may be you can see the close error messages to solve the issue.
    <ORACLE_HOME>/<hostname_sid>/sysman/log directory
    <ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
    Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
    Thanks.

  • FF doesn't start after update to version 27.0.1

    FF doesn't start after update to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

  • Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

    Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

    Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

  • I got photoshop elements 12 from apple app store, after launch,  there no organize( album) , how do I export, import pictures?

    I got photoshop elements 12 from apple app store, after launch , no organize (album). How do I import , export pictures?

    Did you buy the Editor only version? Here's the product comparison - Adobe Photoshop Elements 12 - Buying guide.
    [EDIT] Actually it seems you can ONLY buy the Editor only version via the App Store. Here's an explanation why (scroll down to the fourth section) - Purchases through Mac App Store FAQ.[/EDIT]
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • I am running Windows 8.1 on desktop.  When I exit Photoshop Elements 12, I can not start program again unless I do a computer restart.  What gives?

    I am running Windows 8.1 on desktop.  When I exit Photoshop Elements 12, I can not start program again unless I do a computer restart.  How can I fix this?

    Hi,
    Occasionally, the Welcome screen leaves a process running which prevents the second attempt to start the organizer or editor.
    There is no fix but the workaround is to create shortcuts direct to the applications and use them each time.
    Create shortcuts pointing to the following files:-
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Please let us know if they work.
    Good luck
    Brian

  • Teamviewer doesn't start after resume from hibernation

    Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
    I issued command "teamviewer --daemon start" but no success.

    Quote from: BOSSKILLER on 07-July-08, 00:03:29
    That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
    I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
    Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
    Regards.

  • The browser doesn't start after turning off and turning on the computer

    The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    * check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
    thank you

  • My macbook air doesn't start after being for 2 months off, My macbook air doesn't start after being for 2 months oof

    My macbook air doesn't start after being for 2 months off? What can i do?

    Plug it in and leave it on the charger for about 5 minutes then try to turn it on. If that doesnt work, contact apple and have it sent out for repair or take it to your local apple store. they will probably cover it for free if no physical damage has been done.

  • Photoshop Elements 13 doesn't start after Update to Win8.1   (MSVCR110.dll is missig)

    Hello everybody
    I installed the Update from Win8 to Win8.1
    Now Photoshop Elements 13 doesn't start.
    The mistake/error:  "The program doesn't start, because MSVCR110.dll is missing. Re install the program."
    So I re installed Photoshop but the mistake is still there.
    What can I do?
    LG Simon

    Try steps mentioned on blog: http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
    Please let me know if that doesn't resolves the issue.
    ~Andromeda

Maybe you are looking for

  • Can't send or receive email from one account

    Just bought the iPod Touch last week. Set up Hotmail account with no problems. However my MacDialup.com account (used to be dial up, but is DSL now) won't work at all. They aren't set up to use SSL, so I turned that off after the iPod automatically t

  • WebLogic 8.1.4 on Fedora Core 4 - Installation problems

    Hi, while installing the WebLogic plattform on FC4 (as root, SELinux disabled, running X11, JDK 1.5 installed), I cannot convince the system to start installation in GUI-mode... The message I get is "Unable to instantiate GUI, defaulting to console m

  • I registered Adobe Acrobat XI Pro but it does not show up as a registered product in my account.

    I completed the registration page and got a "Your account will update in 30 minutes" prompt. That was two hours ago. The product does not show in my "Products" profile. What should I do?

  • Can anyone out there parse this kernal panic?

    I've had 2 of these in the last couple of days and I just don't know what the heck is tripping it! Lion has given me nothing but trouble! Mon Jul  9 16:42:09 2012 panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f81703455, type 14=page

  • Where are my data? data loss!

    hi, i just realized that ical and my address book are empty. *all data is gone!* if you have any suggestions what happened and even more important how to solve the problem, please let me know. unfortunately i never did a backup. does osx save a autom