Photoshop Elements 8: Adjusting Location of Image on Paper Before Printing

I recently graduated from Photoshop Elements Version 3 to Version 8. On the Print Preview screen (Version 3) you can adjust the location of the image on the paper. First you un-select "Center Image". Then you either drag the image to its new location or enter in new Top and Left position coordinates.
I have not been able to figure out how to move the image on Version 8.
Regards,
Glacier54

Well------way to go Adobe for "improving" a usefull tool right out of PSE. Now you have to jump through hoops to perform the same procedure that was simple to perform in earlier versions. (ie. now you must simplify a multi layered object before copying to a blank template to then adjust the objects print position on the paper. Like I said-----way to go Adobe.
This also would seem to make fine positioning of an object to print on label stock, for example, to be much more difficult.

Similar Messages

How can I get photoshop elements to open my nef images?

How can I get photoshop elements to open my nef images?

The D3200 requires at least ACR 7.1, which isn't compatible with any version of PSE prior to PSE 11, so no, you can't do this directly in PSE 9.
You could upgrade PSE, use the Nikon software to convert the files and then open the resulting images into PSE for further editing, or download the free Adobe DNG converter to convert your NEFs to DNG files that your version of PSE can understand.

Photoshop Elements Help | Processing camera raw image files

This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/using/processing-camera-raw-image-files.html

gegjr wrote:
When I selected "Save Image" there is an option to select the size of the JPEG preview. Is there anyway to extract the JPEG and does the JPEG contain the adjustments that were made to the Raw image?
The "Save image" command just saves (really converts) the original raw into another raw format : the DNG format created by Adobe to get a universal raw format instead of a specific raw format for each camera in the range of each camera manufacters... Using that feature is your choice.
And what you see in the bottom line : 8 bits or 16 bits has nothing to do with a preview, it is the choice of 'color depth' for the image the converters sends to the editor.
So, your choice is either :
- to click 'Done' which saves the settings of your conversion (white balance, exposure, clarity...) to a very small 'sidecar' file of the xmp type
- to 'Open' in the editor where you can work with all features of the editor (which include saving the output file in any format - jpeg - psd - tiff - png...
http://forums.adobe.com/thread/1030798?tstart=0

My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

I have Windows 7 x64 on a desktop PC. I have Photoshop Elements 13. I bought the Canon PRO-10 PRINTER on 2/3 and at first it worked fine. Then I tried to install it as a plug-in in Elements 13, and everything went bad. When I click on AUTOMATION TOOLS it does say "Canon Easy Photo Print Pro" like it should, but when I click on that I get an error message NO SUPPORTED PRINTER FOUND. CONNECT A PRINTER SUPPORTED BY THIS SOFTWARE AND THEN INSTALL A DRIVER. I also tried the FILE > PRINT command which also said there was no printer installed.
I reinstalled the Canon software and driver. Then I called Canon. I got a real live tech person who checked everything out and asked me to print from a different program. That worked fine and he said, the printer is fine. It's a problem with Adobe. Contact them. I uninstalled my Adobe Photoshop Elements 13 and reinstalled it. But the whole situation remains the same. I can't find how to contact a live technician for help so I'm appealing to ANYONE to help me with this. If you can 't help me with the printer problem, can you tell me how to reach a live tech support person at Adobe??
Message was edited by: Fran Cornelius
Made editing changes at 4:05 pm.

Hi,
After talking to 3 different Canon techs who didn't know anything about
this and told me it was Adobe's fault, a 4th Canon tech e-mailed me a list
of the Elements software that is "compatible" with the Canon Pro-10
printer. The list stops at Elements 12! In other words, Canon has not
written the software for their plug-in to work with Elements 13 yet. I
personally am stunned by this. Considering how popular Adobe Elements is,
you'd think Canon would be up-to-date on having their new printer's plug-in
work with Elements 13, which has been out there for some time.
Not only that, Canon's more expensive printer, the Canon PRO-100, also has
the same problem. My friend just bought one and told me the plug-in doesn't
work with Elements 13.
I have figured out a solution, if it will be of help. I had just
uninstalled Adobe Elements 12 and when I saw that Canon's plug-in worked
with Elements 12, I quickly reinstalled it. Sure enough, when I clicked on
AUTOMATION TOOLS there was the Canon plug-in, and when I clicked on it, the
Canon print screen opened. So I decided I would do my photo editing in
Elements 13, and when ready to print I would open the photo in Elements 12
and print it there. Hope that helps.
F
On Sat, Feb 28, 2015 at 4:08 PM, BMonahan9905 <[email protected]>

I have a macbook pro and using photoshop elements 12. I dont have a problem before but since i upgraded my mac to an new version IOS Yosemite, then begun the problem. It always sotock or freeze.

I have a macbook pro and using photoshop elements 12. I dont have a problem before but since i upgraded my mac to an new version IOS Yosemite, then begun the problem. It always sotock or freeze. What should i do?

properly uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

PHOTOSHOP ELEMENTS 10 USING CANON 7D IMAGE PROBLEMS - HELP PLEASE

I AM HAVING PROBLEMS WITH ELEMENTS 10 AND IMAGES FROM MY CANON 7D WHEN I DOWNLOAD TO SONY LAPTOP ON WINDOWS VISTA. COLOURS ARE DISTORTED, ESPECIALLY ON REDS WHICH ARE SHOWING AS EXTREMELY VIVID AND SOME BROWNS GOING TO A WINE COLOUR. THIS IS A FAIRLY RECENT PROBLEM AND NOT SURE WHAT I AM DOING WRONG? HAVE I ADJUSTED A SETTING BY MISTAKE? ALL HELP APPRECIATED
MIKE WEBSTER
SCOTLAND
UK
70 YEARS YOUNG
[email protected]

Hi Brian,
Thanks for your reply.
I have had the 7d for 4 years or more.
The images downloaded before from the 7d, we're ok and still look ok, it is only in the past month this has happened and it is not with every image it is intermittent. Some are clear then others on the same shoot have the problem. It is even more exaggerated when printed.
I have tried Zoom browser and it is less evident on there but still shows.
I am shooting both with Raw & Jpeg and I think it shows in both.
Being a mean Scotsman I grudge having paid for Photoshop Elements and not getting the good of it.
I have tried Adobe on line but no luck and they ask me to pay for an annual contract before they will give me technical support, which is about £100.
I appreciate your assistance and any further help.
Best wishes,
Mike
Sent from AOL Mobile Mail

Photoshop Elements 7 and Panasonic Raw images

I recently bought a Panasonic Luminex partly in order to shoot RAW images. My research told me that Photoshop Elements 6 and above would accept it. My PE 7 is telling me, however, that it cannot open the image because it is the wrong kind of file. Any guidance?

What model of Panosonic Lumix is it?
Unless it's Lumix DMC-GH1, then in all likelihood, you'll need to use the 8.2 dng converter
to convert your lumix camera raw files to dng copies, which then pse 7 should open.
8.2 dng converter:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5646
more info on which cameras work in particular versions of camera raw and photoshop elements:
http://forums.adobe.com/thread/1030798?tstart=0

Is there a patch to enable Photoshop Elements 10 to import NEF images from a Nikon 7100?

I bought a Nikon 7100. The NEF files taken with the Nikon 7100 cannot be imported into the organizer. The error message is "the files selected to import did not contain any supported file types. The file is damaged or is in a format that cannot be included in Elements Organizer." The file is not damaged as the Nikon NX 2 program had no problem importing the images. Elements 10 was able to import raw NEF files from my D90 with no problem. Is there a patch to enable Elements 10 to recognize the format of Nikon 7100 raw NEF images? If not, is there another photoshop product that will import NEF images from a Nikon 7100?

For the 7100 PSE11 or PSE12 will work as support was added in ACR 7.4.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

When I start Photoshop Elements within Aperture 3, my image is flattened. How can I correct this?

Just installed Aperture 3 last week.
1) I imported all my images from iPhoto.
2) I downloaded a plug-in for Aperture, "Burn to Disc" and it seems to work well.
When I start Photoshop Elements 9 within Aperture 3, my very large file is flattened and of course all layers are gone.
How can I open my PSD files in Aperture 3 complete with layers?
Read the Aperture Manual, checked the discussion groups and remain stumped. I'd greatly appreciate any help. Thanks in advance.

Thank you so much for your reply. Using Photoshop and saving the files within Aperture was a major reason for getting this software. But Photoshop without layers is taking the heart out of the beast. Thanks again for your reply.
--Jess

How do I get Photoshop elements 9 to open RAW images from my Canon g16?

How do I get elemente 9 to open RAW images from Canon G 16?

Hi,
You will need either use the Canon software to convert the CR2 files to TIF files or use the free Adobe DNG converter to convert the CR2 files to DNG files. Then import the TIF or DNG files into PSE 9.
You could update to PSE 12 to avoid the conversions.
Brian

Photoshop Elements 12 - problems with copying image

I'm trying to select a person from one photo and put them into a completely different photo. Using the selection brush (the lasso and magic wand didn't work with this photo) I have outlined the person then copied to the other photo. The problem is when I paste all I get is an outline, no content. I've also tried using the move tool with the same result, just the outline, no content. I've watched various videos and tried many other methods with no luck. Even unloaded and reloaded Photoshop Elements 12. Anyone had any advice? Thank you.

If you are using the regular selection brush, not the quick select tool, it only selects the area directly under the brush, so if you are using a small brush to brush around the outline, that's all you're selecting. The quickest way to fix it is to increase the brush size and hold down the shift key while brushing over the area within the outline, or switch over to the quick select tool, which finds the edges of objects automatically.

Does Photoshop Elements 12 do setup for Gallery Wrap for canvas printing?

Does Photoshop Elements 12 do a setup for Gallery Wrap for canvas printing?
is there a plug-in available?

You shouldn't need a plugin if you follow the steps from the video linked to below that should work in photoshop elements 12
http://www.breathingcolor.com/blog/how-to-create-a-mirrored-edge-for-a-gallery-wrap/
Two command are in different places in photoshop elements
Image>Resize>Canvas Size
and
Image>Transform>Free Transform

My Photoshop Elements 12 is impossibly slow, images do not load in the gallery unless clicked on making it difficult to create albums.

I am using a Windows, fast processing computer. I use it for drafting and other intensive programs but Elements seems to freeze and take forever to load content. Any way to fix this?

Hi,
Before we get the sledgehammer out, try repairing and optimizing your catalog.
Load the organizer
From the File menu, select Manage Catalogs - that should open the Catalog Manager.
Select you current catalog and click on the Repair button
When that has finished, click on the Optimize button
When that is done, click on the Cancel button to close the Catalog Manager.
Approximately how many images are in your catalog?
Brian

Photoshop Elements 9 Editor not showing images in Project Bin

Yesterday I went though my PE9 Organiser and rearrange some of my files and made sure that it was more user friendly.
Today I went in to try and do some edits and not all of the folders are showing up in PE9 Project Bin. I can view some images, but not all images. I know that I can view some images that I move yesterday, but there are some that weren't moved that I can't see and some that I didn't move that i can't see.
When i go to my Organiser I can see that the images are tagged and in the folders - why can't PE9 Editor show them to me?

Hi,
Can you please tell where are folders visible in Project Bin?
I can't see folders in my PE9 project bin.
Thanks
andaleeb

My Adobe Photoshop Elements 10 will not open images anymore

I've worked with Elements for years, and have never experienced anything like this. I'm sure it must be someting simple. Any ideas?

I have already moved the discussion to 'Elements Forum'.
-Pragya

Photoshop Elements 8: Adjusting Location of Image on Paper Before Printing

Similar Messages

Maybe you are looking for