Photoshop elements 8 printing picture package stops working

When attempting to print a picture package, I get eratic results. Sometimes when selecting one or two photos it complete printing. I get the message that "elements has stopped working."

Hi
Being specific ... can you tell me what plateform on you are using PSE and the way you are trying to print.
Or you can do one thing easily : delete preferences of PSE and then try to use it for your purpose.
For deleting prefrences Launch PSE holding alt+shift+ctrl keys on windows or coomand+option+shift key on mac until you get the following message
Delete the settings and please lemme know if the problem exists.
Cheers,
sam

Similar Messages

Photoshop elements 7.0 (organizer) has stopped working, how do I fix this?

photoshop elements 7.0 (organizer) has stopped working, How do I fix this?

Start PSE to get to the Welcome screen.
Hold down the Ctrl, Alt, and Shift keys and click Organize. Keep holding down the keys until you see the Catalog window.
Select your catalog and click Repair. Select “repair anyway” even if PSE doesn’t find problems.
Then for good measure, click Optimize.
If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog. If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
In that case you can try regenerating the thumbnails. Do Show All, Edit > Select All, and then Edit > Update Thumbnail.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402592&sliceId=2
-Garry

Photomerge Adobe Photoshop Elements 7.0 (Editor) has stopped working

When starting photomerge I'm getting the above error message.
I un installed PSE 7.0 and re installed. Same problem.
Any ideas what could cause this problem.
Only change I saw was that Google Chrome was installed.

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 6\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.

Photoshop Elements 12 Zoom Burst effect stopped working

the zoom burst effect has stopped working in PSE 12! when I click the zoom burst function the photo distorts as designed but when i click the "add focus area"
button on the photo it returns the whole photo to normal without focusing the part selected. can anyone advise how to overcome this,
I have uninstalled and reinstalled PSE 12 already with no effect.

I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
and click on Reset Preferences on next launch, then restart pse 12.

Photoshop elements 5.0 has suddenly stopped working..

it says my user name or registration has failed and closes every time i go to open photoshop elements.. please any help would be great as i have no idea whats going on...

I found the tech note, but it seems one needs a working install of pse 5.
http://kb2.adobe.com/cps/401/kb401315.html
If your on a 64 bit version of windows 7, then the registry setting is at
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\{A7B609 FB-83D8-4FC3-8477-1BC65ECFE85B}
One thing you might try is going to
C:\Program Files\Adobe\Photoshop Elements 5.0 (32 bit windows 7)
or
C:\Program Files (x86)\Adobe\Photoshop Elements 5.0 (64 bit windows 7)
right click on the PhotoshopElementsEditor.exe and choose Run as Administrator and see if that does any good.

Adobe Photoshop Elements 6.0 (Editor) has stopped working

Shows this message and then "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Haven't heard anything from windows. Any suggestions?

Did you tried uninstalling and then installing it again?
Ankush

Photoshop Elements 6 Mac Trial - License stopped working

Hi,
I have just downloaded the PSE6 Mac trial and when I installed it, everything worked perfectly. But when I try to open it it says the license for this product ahs stopped working, and that I should try reinstalling it. I have tried reinstalling it, deleting all the files and trying again but it doesn't seem to work...
Any ideas please ?
NStocks

Can you share the exact error message which you are getting on launch?
I believe the last step where you are is getting this error on launch.
Try following the steps as mentioned below from this step:
1. Uninstall PSE 6 Mac from the \Applications\utilities\Adobe Installer\%PSE 6 installer%
2. Run the CS3 clean up script as suggested by Barbara in the link above.
3. Create a new Admin user and login in the machine using that user.
4. Install PSE 6 Mac again.
5. Launch the application.
If it launches fine, we are good. If it gives the "Licensing has Stopped working" error then try this:
http://kb2.adobe.com/cps/401/kb401528.html
Let us know if it works for you,
Cheers,
Ankush

"Adobe Photoshop Elements 6.0 (Organizer) has stopped working"

Hardly an original title, or so it would seem from searching this forum and elsewhere, but now this problem has hit me.
PSE6 has been working fine since I re-installed it on a new computer early this year. I'm running it in compatibility mode in Windows 7 Home Premium 64 bit. I use PSE6 mostly for organising my digital photographs and scans, and occasionally for simple editing. Recently I've been shooting RAW files which I use PSE6 to convert to jpg when I want to export them. The organiser crashed when I was converting and exporting about 100 photographs to a new folder on my hard disc. The RAW files were about 5 MB each and PSE6 got about half way through the batch. Since then, I get the message above every time I try to start PSE6. The only other thing I did was to use PSE6 to create a slide show of the same photographs. I've never done this before, so it's worth mentioning in case it has any bearing.
I've tried most of the actions suggested in John Ellis' FAQs with the exception of re-installing PSE6 (which doesn't seem to have solved the problem for anyone else) and messing with the registry (which I don't feel competent to do). Can anyone put their finger on the cause of this problem and suggest a solution? My sincere thanks to anyone who can help me to reolve this issue!
Martyn

I would suggest using the Editor and try batch processing.
File à Process Multiple Files
Select a source folder containing your raw images
Select a destination folder for your jpegs
Check the bottom box convert files to and from the drop down menu you get a choice of jpeg quality. Select which one you prefer and click OK.

Pse 13 printing picture package

I recently upgraded to PSE 13 and the old way of printing picture packages no longer seems available. How do I print a picture package? thanks.

Which operating system are you using with pse 13?
Which version of photoshop elements and operating system were you using before?
How were you printing the picture package in your older version?

Adobe photoshop elements 10 - printer install

Just downloaded free trial of Photoshop elements 10. When going to print it is asking me to install a printer. My printer is a Xerox Phaser. I have managed to print a couple of times from editing side of elements, so my printer is obviously installed, but now just keeps saying that I need to install a printer. Having looked on this forum it seems that this is a common problem with elements but no advice that is given on this seems to sort out the problem. I have previously had Adobe photoshop CS6 on the computer and had no problem whatsoever with printing. Help please

The only other suggestion is to check the print drivers. PSE10 will rely upon the latest printer drivers being installed. Some manufactures have web sites which enable you to run a scan to ensure you have the latest drivers. Apart from that I’m out of ideas, except to use the dedicated printer, or uninstall and re-install Photoshop Elements or print single images from the Editor. I can understand the frustrations because others have experienced similar problems where the printer works perfectly with all other application except Photoshop Elements.

How to get picture package to work again

I made the mistake of downloading the Yosemite operating system and now cannot get the picture package to work again. I have switched to 32 bit but this time it did not solve the problem. Again I really need help. I am using an iMac and have Photoshop version CS5.1
Mary

Did you look in the photoshop cs5.1 plugins folder to see if the ContactSheetII.plugin and WebContactSheetII.plugin are still there?
On some peoples systems, upgrading to Yosemite, for some reason, deletes some of the photoshop cs5/cs5.1 files.

Photoshop Elements 9 prints and Previews are blank

Recently installed Elements (not the trial, the paid version) on a new MacBook Pro, and it not only won't print, the Print Preview is blank. Wondering if it was the document, so I created a new document with Elements, painted a few strokes, and tried printing again. Same result. The Print Preview is blank. The thumbnail of the image DOES show up in the Print dialog box. I re-installed the software. I deleted and re-installed the printer. I restarted the computer. All other apps are able to print, and Preview app is able to print the same documents that Elements will not print. I've been doing IT for years, and I've never seen anything like this. Any suggestions?

I may have just found a solution. In the print dialog box, under more options, colour management...if i leave the Colour Handling to Photoshop and change Printer Profile to Apple RGB or to my Printer colour profile then I could print. However, colour is off although it looked nice in print preview. So, instead I downloaded ICC Colour Profile for Mac from adobe and change back the Printer Profile to Adobe RGB(1998) which is same as above Image Space profile.
And I am quite satisfied with the print output.
Begin forwarded message:
From: Alina Hashim <[email protected]>
Date: May 11, 2011 8:25:20 AM GMT+04:00
To: [email protected]
Subject: Re: Photoshop Elements 9 prints and Previews are blank
Yes, sorry for the confusion. Normally i go to the web link to post message but it didn't work this time, so i replied directly from email and that seem to be ok.
Anyway, my printer is Canon MG5240. After reading your thread, I installed updated driver from Apple (printer driver for Mac) and when still cannot print, I called a canon rep here and asked about it and he said to go into canon website only. So I loaded driver from Canon website which also didn't seem to change anything. When I was using Elements 9 trial version i did not have problem printing from the software.

HT3500 Printer driver just stops working

Printer driver just stopped working. HP Photosmart c410 wifi, connected to Mini OS 10.8 and Airport. Sez "Printer is not connected" but it is. Doesn't work from other Macs on the network either.
It has worked fine up until just now. Tried printer OFF then ON. Tried to re-install driver, but I can't seem to do this. The correct driver cannot be selected.

hi
i have the same problem with the centro
did you found a solution?
farmer
Post relates to: Centro (Unlocked GSM)

Installed new Premier Elements 12 and dymamiclinkmanager has stopped working

The Sw does not start at all I get several error messages:
Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    dynamiclinkmanager.exe
Application Version:    6.0.0.0
Application Timestamp:    523cc6d3
Fault Module Name:    MSVCR100.dll
Fault Module Version:    10.0.40219.1
Fault Module Timestamp:    4d5f0c22
Exception Code:    40000015
Exception Offset:    0008d6fd
OS Version:    6.3.9600.2.0.0.256.48
Locale ID:    1035
and after those a Message:
Adobe Premier Elements 12 has stopped working
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Elements.exe
Application Version:    12.0.0.0
Application Timestamp:    523cd4d5
Fault Module Name:    dvamarshal.dll
Fault Module Version:    11.0.0.0
Fault Module Timestamp:    523cc62d
Exception Code:    c0000005
Exception Offset:    0000000000034961
OS Version:    6.3.9600.2.0.0.256.48
Locale ID:    1035
So did I purchase piece of crap, or what should I do to get the SW working?
Br
-H

First, note that this is a user-to-user forum. If you want to contact Adobe, you'll need to call or write them on their main site.
That said, as the note says at the top of the forum, you're going to have to provide us a lot more information if you want us to help you. "Stopped working" doesn't tell us much. Does this mean that it was working in the past but then stopped? What stopped? What did it do that it's not doing now? What were you doing when it stopped? Was it when you were adding video to your project, for instance?
What operating system are you using? If Windows, have you manually gone to Windows Update and made sure you've got the non-critical updates, which don't download automatically to your system? Have you ensured you have the latest version of Quicktime, per the program's requirements?
How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?
What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your Premiere Elements project?

Is their a fix for photoshop elements 11 move tool? Not working with Yosemite OS upgrade.

Is their a fix for photoshop elements 11 move tool? Not working with Yosemite OS upgrade.

Hi,
We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
In the meanwhile, you have two options to work around this problem:
1. Option1: Use a mouse instead of the trackpad
2. Option2: Install a plug-in which should workaround the problem
Plug-in installation instructions:
1. Close Photoshop Elements
2. Download this zip file to a location you can easily find (e.g. your desktop)
3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
• For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
• For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
Hope this helps!
Regards,
vaishali

Photoshop elements 8 printing picture package stops working

Similar Messages

Maybe you are looking for