Photoshop elements 8 under windows 7 "open with" cannot link editor

Hello,
I recently upgraded my computer to 64bit, loaded my photographs and can open adobe photoshop elements 8 and editor and work on pictures.  However, I usually browse my pictures in windows explorer, open folders of interest and see small pictures and browse to select.  On picture I rigfht click and chose to "open with".  Now adobe elementsw editor does not appear in this list as it did previously.  I select "chose the program to open with" and when I find it and select it, it still does not appear.
How can I fix this?
Thanks for your help,
gmasn10

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go  to C:\Program Files\Adobe\Photoshop Elements  10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Similar Messages

  • Trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    HI Bill,
    Did you set Internet Explorer as the default browser? If not the set it as the default. Check to see if you can do custom install
    Thanks
    Scott
    Here is the system req.
    Photoshop Elements 6.0
    Windows
    Intel Pentium 4, Pentium M, or Intel Centrino 1.3 GHz (or compatible) processor
    Microsoft Windows XP with Service Pack 2 or Windows Vista
    256 MB of RAM (512 MB recommended)
    1.5 GB of available hard-disk space
    Color monitor with 16-bit color video card
    1024 x 768 monitor resolution at 96 dpi or less
    Microsoft DirectX 9 compatible display driver
    CD-ROM drive
    Web features require Microsoft Internet Explorer 6, Netscape Navigator 7.0, or Mozilla Firefox 1.5
    Languages

  • Photoshop Elements 8 in Windows 7 open screen runs indefinitely....

    When I open Photoshop Elements 8 in Windows 7 the starting screen reads "Gathering User Info.." and this color bar runs continuosly, but the program never fully opens....

    Let's create a shortcut for Editor on the desktop, by-passing the welcome screen:
    Go to C drive>Program Files (x86)>Adobe>Photoshop Elements 8
    Right click on that, >>Send to desktop (create shortcut)
    Double click on the shortcut. Does Editor open now?

  • I have an old Kodak Photo CD and Photoshop Elements 11 on Windows 7. How can I open the .pcd images?

    I have an old Kodak Photo CD (1999) and Photoshop Elements 11 on Windows 7. How can I open the .pcd images?
    Please help me open these photos. They are very important to me and I need to access them.
    If I can't do it with any of the software installed on my computer, would someone be willing to open them, save them as jpgs and send them to me?
    Thank you so much, Nancy

    You can get the plugin here by downloading the Extra Content for Photoshop CS3  File 2
    Just be sure to follow Note:Very Important Instructions or the link won't work.
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    After downloading the PHSPCS3_Cont_WWE.exe, double click on it to extract the contents, probably to your desktop.
    Then in the Goodies folder, Optional Plugins folder, you'll see the Kodak PhotoCD folder
    Open that and copy the Photo CD.8BI to C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins
    Copy the profiles to C:\Program Files (x86)\Common Files\Adobe\Color\Profiles

  • Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

  • Can't install adobe photoshop elements on my new HP computer with windows 8

    Can't install adobe photoshop elements on my new HP computer with windows 8.

    Which version of PSE? Older versions are simply not compatible. Only 10 and 11 are.
    Mylenium

  • How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

    How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

    Which version if iPhoto and MacOS X do you have?
    Do you have any iPhoto plug-ins  installed?
    Open the folder /Library/Application Support/iPhoto/Plugins/
    To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto.  Is there anything installed?

  • How to remove black "blocked plug-in" window that opens with iPhoto and covers everything under it?

    How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

    Which version if iPhoto and MacOS X do you have?
    Do you have any iPhoto plug-ins  installed?
    Open the folder /Library/Application Support/iPhoto/Plugins/
    To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto.  Is there anything installed?

  • How can I install Photoshop Elements 11 on a new computer with Windows 8?

    How can I install Photoshop Elements 11 on my new computer with Windows 8?

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • When I click on a picture, Photoshop Elements 12 does not automatically open.

    When I click on a picture, Photoshop Elements 12 does not automatically open (as it did when I used previous versions Photoshop Elements 4 and 9).  I can't even right-click (Windows) on the picture and choose Open With and specifiy Photoshop Elements 12.  I have called Adobe several times (Case No. 185140584) and they keep saying it has been sent up to senior management and they will call me back with a solution - but to no avail!  No return calls and I still can't really use the Product I paid for and downloaded.  The only way I can open up a picture to edit it is to open Photoshop Elements 12 and then then click "Open" and then search for the picture on my hard drive (which takes a lot more time!  I did not experience this difficulty at all with versions 4 or 9!

    Hi,
    You failed to say which Windows system you have - I can get the "Open With" to work on my Windows 7 64bit system.
    When you try to set up the "Open With", are you setting the correct target program?
    It's the green one (not the red one) in the above image.
    Once you have selected that program, make sure you set it as default so that a double click will open the photo in the editor.
    Good luck
    Brian

  • Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

    Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

    same question with PS11

  • I have photoshop elements 5 and i cant open NEF files help

    i am new to editing i set my camera on raw and now photoshope elements will not let me open the pic says wrong file how do i open them now.
    thank you

    Instructions:
    Delete or move the existing Camera Raw 8bi file (see below) from the File Formats Folder.
    Click and download the plug-in from the above link (R_Kellys link says for PSE6 but will definitely work with PSE5 also)
    Open the zip folder you just downloaded and click Extract Files.
    You should see the plug-in file you need. The plug in has a file name: Camera Raw.8bi
    Now drag the plug-in file (or copy it) into the File Formats folder in the following location:
    C:\Program Files\Adobe\Photoshop Elements 5.0\Plug-Ins\File Formats
    If you are using a 64-bit edition of Windows, move and install the plug-in file by navigating to:
    C:\Program Files (x86)\Adobe\Photoshop Elements 5.0\Plug-Ins\File Formats
    N.B. Before you start the download you need to do some preparation. Navigate to the File Formats Folder and move Camera Raw.8bi  I suggest you move it from the File Formats folder to My Documents or drag it to the desktop before you begin. This will prevent it being overwritten by the new Camera Raw file (it will have the same name) and you can always move it back again if the download installation fails.

  • Photoshop Elements 7 and Windows 7

    I am currently running Photoshop Elements 7 on a Dell machine with Vista 64.  When I bought the computer, Dell offered a free upgrade to Windows 7 which I have ordered.  If I install the upgrade to Windows 7, will my Photoshop Elements 7 run without major problems?
    Thanks in advance for your assistance.

    I just accomplished this without any real problems and am now running with my same license on the newly rebuilt PC.  Here is what I did ...
    Originally my PSE7 configuration was set up last year on new Intel I7-based PC running Vista 64 bit version with a retail copy of the PSE7 software, i.e. not the upgrade version.  Once that was setup I imported my catalog from the older Adobe Photoshop Album on my previous system.  That put me at the place you are now, i.e. PSE7 on Windows Vista.
    For this upgrade I puchased the upgrade version of Windows 7 and an additional second disk drive.  I installed Windows 7 onto the clean drive, giving me a dual-boot system for either OS.  While booted on the Vista drive, I used the easy-transfer method to write a backup of my Vista files to an external disk drive.  I then rebooted into the Windows 7 drive and used the Easy-transfer tool to reload the files from the external drive. (note; this easy-transfer included >200GB of music/video/image files so it ran for several hours for each phase of the transfer)
    Once I verified the directory structure on the new Windows 7 setup, only then did I do the installation of PSE7.  That wnet flawlessly and relicensed without any problems.  Next I was able to open up my catalog in organizer and all of the images were intact.  Since then I have had no issues with the configuration.
    So bottom line is you should be fine doing the upgrade regardless of whether you do the upgrade like I did to a new drive or an in-place upgrade overlaying your vista environment.  For the in-place upgrade I would strongly recommend you still do a backup of all of your images and their associated catalog(s) to an external drive.  Win7 is a vast improvement over Vista so I'm sure you won't regret the upgrade but I don't trust any vendor's software upgrade procedure, especially Microsoft so please do the backup first.

  • I have Photoshop Elements 12. When I open the program, the tools, menu, everything is teeny tiny. Can barely read it. What's wring and how can I rectify it?

    I have Photoshop Elements 12. When I open the program, the tools, menu, everything is teeny tiny. Can barely read it. What's wring and how can I rectify it?

    lianemily777 a écrit:
    Thanks MichelBParis
    The display resolution allows a user to set according to pixels I think, eg 3200 x 1800. So which setting is considered normal? It does not have a "normal field.
    You are right.
    Before HiDpi displays became available three years ago, you could find advice about what was the good resolution for displays, depending on their size in in/cm and viewing distance.
    - For relatively big displays (22" to 30") a pixel resolution of 1920 x 1200 or 1920 x 1080 was considered optimal.
    - For big laptops or small desktop, 1680 x 1050 or 1640 x 900 were good.
    In Windows, you could set the size of fonts to full resolution or 25% or 50% bigger... if the software supports this feature, which was not the case with Photoshop, Elements... The size of the fonts was deternined and fixed in the software itself, with no way to scale the fonts. The solution needed Microsoft to provide developpers with new programming interfaces and the solution for developpers was to rewrite a substantial part of the code.
    Anyway, to enable good viewing of characters on common 12 or 13" HiDpi displays, you need to use the fonts at 200%.
    And that makes sense. To see the same characters on a 12" display the same as on a 24", they must be twice the size... good rule of thumbs.

Maybe you are looking for

  • Adding a field to the layout in Trx CJI3

    Hi Folks, Prg Name:RKPEP003 Trans Name:CJI3(Display Project Actual Cost Line Item) ECC 6.0 CJI3->F8->ALV GRID REPORT->Dbl clik on a rec with PERNR value->List O/P seen List O/P contains certains details corresponding to that PERNR. I need to add a fi

  • AppV5 Excel/Office ProPlus 2013 Click to Run Sequencing (and include some native Addins)

    Hello, We need two native Excel 2013 Addins: PowerPivot and PowerView. Since Office 2010 is installed locally on all client machines I would like to virtualize Excel 2013 (Click to Run) with these two addins. Licensing is no issue because an Office 3

  • How to open NAT in Time Capsule? (for gaming)

    Hi there. *How do I open NAT on my Time Capsule?* I've tried to go to +Airport Utility > Time Capsule > Internet+, but there's no NAT tab (like I've seen in different solutions on the internet). I only have one tab called +Internet Connection+. In th

  • ARE1 & ARE3 documents

    Hi All, Can i have same  Sales Area(1000/10(export)/10) for Export Sale(under Bond) & Deemed Export Sale? Where in Export Sale  i will create ARE-1 document & In Deemed Export sale i will create ARE-3 document. is there in technical issue as far as C

  • How do I make a site appear in the Permissions Manager?

    I forbid all sites to set cookies. The sites where I have an account are the exceptions. I'm finding it hard to make a site appear in the Permissions Manager. I tried lots of things. Like placing a bookmark in a bookmark folder, creating a bookmark m