Photoshop Elements 9, wont install from DVD on mac

Hi
I have a boxed PSE9 & PRE9 set from Amazon uk that I've had for about 9 months before Lion was introduced. I required it today for the first time so unboxed it but when I went to install it, the installer just froze before anything happened. I had the 'spinning ball' on hovering the mouse pointer over the install window. I retried 5-6 times, all the same even after restart etc.
I have an iMac 3.2Ghz Intel core i3, 4Gb ram running Mac OS 10.7.2.
Thanks for any help!
Simon

Tetraguy83 without a specific error message I would recommend you begin running through the steps listed in Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x.  Please respond to this thread if you have any inquiries regarding the steps provided.

Similar Messages

  • Photoshop elements 10 wont install

    I have had elements 10 from the word go. I have just reset my computer to factory and now elements 10 instals then removes it's self

    http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html
    then install

  • Photoshop elements 13 wont install it is 32 bit my computer is 64 bit how do i load

    cant install my computer is 64 bit photoshop elements 13 is 32 bit

    Jim mac 09 what specific error message do you receive?  Also what operating system are you using?

  • CS5 Install from DVD on Mac Os 10.9.4 stymied

    Hi,
    Install blocked by not being able to turn off "SafariNotificati" app.
    Any suggestions?

    Try Re: Acrobat XI Pro Install asking to "Please close the following app to continue: 'SafariNotific'"

  • Photoshop Elements 10 for Mac not installing from DVD

    DVD or downloaded "trial" version of PSE 11 will not install on Mac running OS Lion (10.7.5).  Reparied Disk Permissions and still doesn't instal.
    When DVD gets installed, folders appear, click on Photoshop Elements, double click install.app, install runs then back to Finder screen.  Only installs a folder called "Adobe" under User > Applications.  Nothing inside folder to indicated software is installed.  Nothing gets installed in the generall Applications folder.  HELP!

    I figured the PSE 10 serial # would not work.  I'd be happy with just getting 10 to work.  This laptop was just put into use and I did a transfer from my old laptop so there may be files on this new one that I need to delete.  I've tried using an Adobe Uninstaller and it finds nothing to uninstall.  I did notice Photoshop Elelements Organizer is on here and working but not the Editor which is really what I use and need.
    Is there something I can download from Adobe to "clean" any files interferring with my new install?  Do I need to uninstall the Organizer as well?
    BTW, thanks for helping me.  I really appreciate it!

  • Can you download a 32 bit installer for photoshop elements 12 to install on a 64 bit system (windows 7)

    can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance

    yes, if you follow all 7 steps you can directly download a trial here:  Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • Is it safe to uninstall Adobe Photoshop Elements 10 after installing Adobe Photoshop Elements 12?

    Is it safe to uninstall Adobe Photoshop Elements 10 after installing Adobe Photoshop Elements 12?  I just upgraded from 10 to 12 and wanted to know if it is safe or if there would be any issues with uninstalling and removing Adobe Photoshop Elements 10. 

    Yes you can, if you are happy with the way PSE12 is running.
    However both apps will happily co-exist, and there is no duplication as both use the same images on your hard drive.
    PSE10 also has some features now removed from PSE12 as Adobe transitions towards 64 bit applications. See my PSE12 first look link:
    http://forums.adobe.com/message/5709296?tstart=0

  • Photoshop elements 11 not installing in windows 7 x32

    photoshop elements 11 not installing in windows 7 x32
    downloads ok then on install it gets to almost the end and a message appears can not continue and it uninstalls itself.

    Hello, thank you for your prompt reply. I have downloaded  v12 of Photoshop Elements and installed to my Win 7 x64 machine and its working like a charm. Perhaps v11 did not like the spec of my x32 machine.
    Thank you again from a satisfied customer.
    Regards William.
    Date: Sun, 9 Mar 2014 09:58:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: photoshop elements 11 not installing in windows 7 x32
        Re: photoshop elements 11 not installing in windows 7 x32
        created by Bill Hunt in Photoshop Elements - View the full discussion
    Can you list your computer hardware specs.? Special attention needs to be paid to the I/O (Input & Output), or the HDD's (Hard Disk Drives), their size, speed, amount of free-space, etc.Are you attempting to do the installation to the default location, or to a custom location? Good luck, and let us know a bit more please.
    Hunt
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6193137#6193137
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6193137#6193137
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6193137#6193137. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photoshop Elements 11 Silent install not that silent

    Hi,
    After following the Silent Install Instructions here http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html it still is not fully silent.
    As mentioned in the KB article you need to create a application.xml.override file that is said to supress the Eula but it still shows up.
    The actual install of the software is silent but on first start it shows the ElementsOrganizer EULA then makes you select a Country/Region and then shows the Photoshop Elements 11 EULA.
    Is there any way that we can supress both of the EULA's and automatically mark Australia as the Country/Region??

    @99jon,
    That did help out alot. In the end I added Country=12 on to the end of my install command which is the country code for Australia.
    I also added in another line in to both of the application.xml.override file which supressed the EULA's
         <Data key="EULA">Suppress</Data>
    I also used this method for a silent uninstall which might help other users
    Uninstall PSE-10 in silent mode
    Open the command prompt in the administrator mode.
    (Windows XP) Choose Start > Run. Enter cmd in the Run window, and press OK.
    (Windows 7 and Windows XP) Click Start (Windows-Logo), and type "cmd". Press [Shift]+[CTRL]+[ENTER].
    Run the following command to uninstall Photoshop Elements.Verify that the Photoshop Elements 10 folder has been removed from the Program Files folder after running the command.
      start /wait Msiexec /x { EE549AF9-8FAA-4584-83B2-ECF1BC9DC1FF} NOT_STANDALONE=1 /qn
    After the uninstallation is complete, run the following command to uninstall Elements Organizer. Verify that the Elements 10 Organizer folder has been removed from the Program Files folder after running the command.
    start /wait Msiexec /x {22D3A614-482C-444A-932C-9DA1B8ECDFD2} NOT_STANDALONE=1 /qn
    After Elements Organizer has been uninstalled, run the following commands to uninstall STIs (ACR, APE, ESTK). The following procedure assumes that you are using the C drive as your boot drive. Modify the command accordingly if you are using a different drive.
      cd "Program Files\Common Files\Adobe\OOBE\PDApp\DWA"
    setup.exe --mode=silent --deploymentFile="C:\Program Files\Common Files\
    Adobe\Elements10STIForPSE\ElementsSTIInstaller.remove.xml" 
    Finally, run the following command:
    rmdir /s "C:\Program Files\Common Files\Adobe\Elements10STIForPSE"

  • Photoshop Elements 12 (fresh install, on fresh installed Windowss 7 Ulitmate 64 OS) was printing incorrect colors, now is not printing at all. All other applications will print.  I was having this problem before I restored my PC back to factory defaults.

    Photoshop Elements 12 (fresh install, on fresh installed Windowss 7 Ulitmate 64 OS) was printing incorrect colors, now is not printing at all. All other applications will print.  I was having this problem before I restored my PC back to factory defaults. Now it is happening again.
    Any suggestions?

    Hi @prdstudio3 ,
    Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • I just installed Photoshop elements 11. Install fine. When I clicked to open Organizer, I received a messaging indicating that it was out of date and coudl not be upgraded. How can I address/fix this?

    I just installed Photoshop elements 11. Install of the application was fine. When I clicked to open Organizer, I received a messaging indicating that it was out of date and coudl not be upgraded. How can I address/fix this?

    Thank you for the replies. I'm afraid neither one helped.
    kglad, I never get to any error code so your link can't help.
    Jeff, I looked at your link and
    a) again, I never make it to an error code
    b) I'm definitely connected to the internet
    c) I can access secure sites; I tried connecting with the firewall disabled and the same thing happened, so I don't believe it's a firewall issue.
    d) I don't understand the checking host sites - this is far too complicated for a novice user. It should not be this difficult to get a software running. I don't want to mess with these kinds of settings.
    e) I followed the steps for the global sign in root CA and my screen looks the same as the picture here.
    I can't activate the software offline as there is no option to generate a response code when I click on having trouble connecting to the internet. All I get is a prompt to change my password.
    If the problem were simply connectivity from my computer, then why does the box completely freeze? Can't cancel, can't click on the little X to close it, can't right click on the box to close it. I have to reboot every single time. I know others have had the same problem and I haven't found any answers that I could apply.
    I don't understand for the life of me why Adobe does not have TELEPHONE customer support. I have spent 2 days on this, this is crazy.

  • How do i install PhotoShop? it wont install do i need to install an updated version of adobe?

    how do i install PhotoShop? it wont install do i need to install an updated version of adobe? PLEASE HELP ME

    You have given us no information to help you. Please tell us what system you have, what version of Photoshop or Photoshop Elements you are trying to install, and above all what happens when you try. Please give any error messages in full. There's no need for giant letters, though.

  • How can I use photoshop Elements 8 to make a DVD to play on a regular TV-DVD? [was:DVD-CD-r]

    How can I use photoshop Elements 8 to make a DVD that will show on a regular TV-DVD set-up

    You can't do this in PSE by itself. I'm assuming you have windows, so output your slideshow as a wmv file and then use Premiere Elements to finalize the disc, if you have that. If not, use whatever you do have (if you can burn DVDs, you have software). Even windows dvd maker will do this.

  • I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    Have a look here:
    https://www.google.com/search?q=%22You+can%27t+open+the+application+Photoshop+Elements+2.0 +because+PowerPC+applications+…

  • I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS 13 TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE.  I WANT TO USE A ROUND BRUSH.

    I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS EDITOR TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE.  I WANT TO USE A ROUND BRUSH.

    You have the caps lock on

Maybe you are looking for