Photoshop Elements Editor - Entry point not found

This error? has come up after installing and then updating my new version of elements (12). I am running Windows 7 64bit with 16gb ram.
Any ideas?

Thanks for the idea, but I had allready re-started twice. I found that the error was being caused by a Plugin, and possibly it was because I had installed it incorrectley.

Similar Messages

Adobe premiere elements.exe entry point not found

adobe premiere elements.exe entry point not found
how do I fix this error message and run the program?

steinbeck wrote:
Premiere elements 12
On Microsoft windows Xp
Photoshop Elements 12 requires Windows XP SP3
http://www.adobe.com/products/photoshop-elements/tech-specs.html
Try installing Service Pack 3 on Windows XP.
http://support.microsoft.com/kb/322389
While you're at it, make sure your XP is fully up to date before installing PSE12.

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

HELP....Error Message...Photoshop.exe-Entry Point not found

Hello
I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
Photoshop.exe-Entry point not found
The procedure entry point
?terminate@struturalimageeditingYAXXZ
Could not be located in the dynamic link library Patchmatch.DLL.
I have tried to redown load but keeps saying that it is downloaded
Help please
Bobbi-Lee

Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.

Photoshop CC (64 bit): Entry Point not found

Hi,
Just updated the Photoshop CC (64 bit) and after update the whole thing does not work anymore. When you try to start Photoshop CC you get an ugly message stating:
Photoshop.exe - Entry Point Not Found
The procedure entry point
?ProposeSearchBounds@StructuralImageEditing@@YA?AVBox@1@AEB ...
could not be located in the dynamic link library D:\Program Files\Adobe\Adobe Photoshop CC (64bit)\Photoshop.exe
Any ideas? I really need the P CC so any help is valuable! The platform is Windows 8 / 64 bit and the P CC used to work..
Update:
The 32-bit version of P CC works. So it is only the 64 bit version that does not start.
Message was edited by: Jari.O

@ Talha1997,
Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.
If it does not work please let me know, I would try to resolve it over a connect session.
Regards,
Ashutosh

Error : Photoshop.exe - Entry Point Not found

I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
Photoshop.exe - Entry Point Not found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
-Jitu

Install SP3. It's required in order to run Photoshop on Windows XP.
http://www.adobe.com/products/photoshop/tech-specs.html

Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

I am having a problem opening 32 bit version of Photoshop CS5 in Windows 7. The 64 bit version opens fine, but when I try and open the 32 bit version, the following window opens: “Photoshop.exe – Entry Point Not Found” X The procedure entry point_CFCreateApplicationRepositoryPath could not be located in the dynamic link library CoreFoundation.dll. My only option in this window is an OK button. If I click this button several times, the program eventually opens. Below is screen shot of the error window.
Thanks,
Matthew Kraus

Thanks Zeno and others. Uninstalling Quicktime and then reinstalling it was the fix.
Thanks again,
Matthew Kraus

Error Message -Entry Point Not Found -Can you help me?

When I open up my Photoshop 6 Elements I get this error message:
" Entry Point Not Found- the procedure entry point-CFBundle Copy File Type For File Data could not be located in the dynamic link library core Foundation.dll "
I can click the OK option 3 times and the message disappears and I am able to work in Photoshop.
Can anyone tell me what this erro message might mean?
Thanks!

I am receiving the exact same message when I open Photoshop Elements 6.0. ADOBE: PLEASE respond to our requests and post the fix for this.
Also, to whoever runs this forum, please do not indicate that this question has been answered in any way.
thank you.
frustrated

Help, Entry Point Not Found

I have just purchased photoshop elements 7 and when I open a new document I get a Entry point Not Found It say's The procedure entry point ?WriteData@ActivityTracker@@QAHGQAD@Zcould not be located in the dynamic link library dldtutil.dll. Please Help me figure this out. Also it lock's the computer up and would let me out of this.

Did you disable your antivirus software and any products from Norton/Symantec before installing? If not, uninstall PSE and reinstall with all that stuff shut off.

Flash CS5 wont open after working for years? Entry point Not Found

Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
Randy

You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

Entry point not found msvcr110.dll error

I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

CS3-Entry Point Not Found

Hello-
I'm running WinXP SP3.
I have Photoshope CS3 and have recently installed Flash CS4.
Whenever I double-click a Photoshop file to open/edit it in Photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Photoshop.exe - Entry Point Not Found" "The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll."
After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly.
No other errors, no missing functions, no lag.
Still, it's become quite annoying to start the program like this everytime and I'm pretty sure getting an error during start up is a good indication that not everything is 100%.
Does anyone have any suggestions about what I should do?
I also attached a picture of what I get in case it's helpful in some way.
-PT

You could try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.

Kernal32.dll / Dllregisterserver entry point not found

Photoshop on Win Xp,
error: Kernel32.dll entry point not found.
Then as Admin on CMD prompt:
Regsvr322 kernel32.dll
Error: Kernel32.dll was loaded, but Dllregisterserver entry point not found.
Purchased a 3rd partry to fix all Dll files. No help.
Uninstalled the photoshop, & did Regsvr kernel32.dll, still same error.
Please help.
I appreciate any help in this matter.
Thank you

Thank you for your response. I just went thru complete all patch utilities update for win Xp, & that took care of it. Thank you again.
Sent from my iPhone

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                           OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

Photoshop Elements Editor - Entry point not found

Similar Messages

Maybe you are looking for