Photoshop Elements v13 will no longer launch, the message "Elements 13 Organizer has stopped working" appears despite me running this program successfully for several months.
Can anyone help with this problem - up until recently I had been using Elements 13 very successfully but now it won't launch - neither will 12 but 9 will but with an old catalog. Help!
Please try carrying out the instructions mentioned here:
Elements Organizer crashes at launch
Thanks,
Anwesha
Similar Messages
-
Photoshop elements 7.0 (organizer) has stopped working, how do I fix this?
photoshop elements 7.0 (organizer) has stopped working, How do I fix this?
Start PSE to get to the Welcome screen.
Hold down the Ctrl, Alt, and Shift keys and click Organize. Keep holding down the keys until you see the Catalog window.
Select your catalog and click Repair. Select “repair anyway” even if PSE doesn’t find problems.
Then for good measure, click Optimize.
If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog. If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
In that case you can try regenerating the thumbnails. Do Show All, Edit > Select All, and then Edit > Update Thumbnail.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402592&sliceId=2
-Garry -
iTunes keeps shutting down when I open it up. The message says iTunes has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solutions is found.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2 -
iTunes stops working. The message says iTunes has stopped working due a problem to the program. How do I find a solution?
Hey there Warrior41,
it sounds like you are unable to use iTunes because it either will not launch without this error, or you get the error when you are using it. Sorry to hear about that, that can be pretty aggravating. I would use the troubleshooting in the following article to help resolve the issue, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with opening iTunes in Safe Mode and see if the issue persists. If not, the article will help you troubleshoot for 3rd party plugins that may be causing it:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
If that doesn't resolve the issue there are additional steps in the article if needed.
Thank you for using Apple Support Communities.
Regards,
Sterling -
When I try to open up itunes I am getting the message that itunes has stopped working and then microsoft sends an error message to find a solution. What can I do to fix my itunes?
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)! -
I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??
Try updating the printer driver.
-
I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?
RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened. -
Keep getting the message that iTunes has stopped working
Keep getting the message that iTunes has stopped working. Cannot contact the store to do anything
Ahhh, a number of anti-virus programs have issues with programs that use libraries that may look like virus signatures. Hardware damage can cause software problems in programs open when the hardware problem occurs by causing electrical impulses that destroy parts of the software. The short answer is it would be a good idea to have a really good technician make sure the computer is correct and then transfer the content of the hard drive to a clean hard drive and reinstall programs that don't pass checksum tests.
The total of what you say is a system that could use a careful going over...make sure you are working from a stable and solid base. -
I have today purchased an iPod nano (gen 6); I use Windows 7. Am trying to register my iPod but each time I submit required info I get the message "iTunes has stopped working". I have reinstalled iTunes with same result. Where do I go from here?
BrianHello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
HT1349 when i open icloud i get the message"Applephotostreams.exe has stopped working"
I have reinstalled a couple times and still have the same problem. Any help?
http://lmgtfy.com/?q=Applephotostreams.exe+has+stopped+working
-
Can anyone suggest how I might overcome this please.
Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian -
It's the biggest tease ever haha! I can see the photo beautifully merged but then it forces me to close the program! I have tried this a few times and it's always the same. So annoying. I have never had this problem before until I recently updates to CC from CS6. Any thoughts? Do I just simple reinstall the program?
This panorama consists of at least eight single shots which were (in my opinion) not taken
using a tripod by rotating the viewline about a fixed point. They are more or less somewhat
arbitrary shots.
Merging these requires a kind of optimization which can fail because of numerical problems,
though the intermediate result seems to be convincing. A crash log cannot help.
A remedy would be the manual arrangement of the single shots, varying the degree of
overlapping. That was available in older versions of Photoshop (for me in CS2).
Enlarging your example, we can see some hairlines, like edges of torn paper. What's that?
Best regards --Gernot Hoffmann -
I've checked the problem reports and solutions on my laptop and this is what popped up.
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: iTunesMobileDevice.dll
Fault Module Version: 503.2.0.1
Fault Module Timestamp: 4ea63899
Exception Code: c0000005
Exception Offset: 0003a5d0
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Any help you could give would be awesome!For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2 -
It worked this morning. The only change done during the day is adding 250 photos to the Organizer
Hi,
If it was working but now fails, it could be a problem with your catalog.
I would suggest you try repairing and optimizing it
Load the organizer
From the File menu, select Catalog - that should open the Catalog Manager.
Select you current catalog and click on the Repair button
When that has finished, click on the Optimize button
When that is done, click on the Cancel button to close the Catalog Manager.
If it crashes before you can get into the Catalog Manager, start the organizer while holding down the shift key - that should go straight into the Catalog Manger - resume at step 3 above.
If after repairing, you still get it crashing, then try the next test.
Start the organizer while holding down the shift key so that you enter the Catalog Manager.
Click on the New button (top right) and enter a new name (TestCat or something) and click on OK button.
That should create a new empty catalog. You can see if that says up for more than a minute. You could try importing a few images but I suggest that you don't do anything with them.
If that stays running then we know it is the catalog - otherwise it is the application.
Good luck
Brian -
Everything was working fine and when I switched from email back to Firefox the problem started. Nothing new had been added before it experienced this problem. I also have IE on the computer, so I can get to this site.
You need "sysinternal's process explorer", it is free and can replace the Microsoft process explorer, that you get by "CTRL+ALT+DELETE". Either program will allow you to kill the instances of FF that didn't die as they should have, when you closed them. Sysinternal is easier to use, it is a graphic display with many options. Do not push "CTRL+ALT+DELETE" twice unless you want to reboot, that is its default behaviour under Microsoft.
Maybe you are looking for
-
hi there, ive got some problems with director mx2004... i'm making a website with director. one part of te website is a guestbook. but how can i create a online guestbook in a dcr file? ive tried to implement a flash guestbook witch uses php and mysq
-
Pixel operation question regarding ints and bytes
Hello, Im using this: public static void setR(int[][] pixel, int xIndex, int yIndex, int value) value = (value & 0xff); pixel[xIndex][yIndex] = (value << 16) | (getG(pixel[xIndex][yIndex]) << 8) | getB(pixel[xIndex][yIndex]); to s
-
After erasing Yosemite and reinstalling Lion can't update
Hello, I wonder if anyone might have some suggestions for my problem. I installed Yosemite and after constant troubles finally erased my hard drive and did an internet recovery to reinstall Mountain Lion. Internet recovery installed 10.8.5 along wi
-
Aperture and Itunes on extradisk in netwrok ?
Hi, I have the following cobfiguration: Straigthforward ADSL modem Connected to the newest 3TB Timecapsule Elsewhere in the house the newest generation Airport Extreme as range extender. Our 5 notebooks in the house plus a desktop Mac all backup to t
-
No spell check on Messages App?
How do I get Messages on OS X to auto complete and spell check like iMessage on iOS?