Photoshop Elements9 has a dark background which makes it difficult to use for a sight impaired person. Is it possible to change it to a light background.

Similar Messages

How can I make sure I only see what is on my ipad instead of everything I have in the cloud? Since upgrading to 10S 7 I see every programme I have ever bought - which makes it difficult to see the ones I want to watch now.

I buy programmes etc for the whole family and it used to be that on each ipad I could only see the icons for the programme I chose to sync to the ipd/ipod etc. However, now every programme I have ever bough is dospayed which makes it difficult for family members to know what they can watch and what they can't. How do I resolve this as it has only been sonce the IOS upgrade?

If these are videos, try going to Settings>iTunes & App Store and turn off Videos under Show All.

HT4623 My iphone and ipad share "notes," but there are many duplicates of several notes which makes it hard to use. Is there a solution to these duplicates??

My iphone and ipad share "notes," but there are many duplicates of several notes which makes it hard to use. Is there a solution to these duplicates?? I am backing both up to the icloud. Help!
Mark

Hello Karen
Check out the quoted section below to see if you any subject line is causing the issue of them not syncing.
iOS: Syncing Notes
http://support.apple.com/kb/HT4191
Unable to sync notes with Outlook
If notes are not syncing from Outlook, verify that you don't have any notes with no content or subject in Outlook. These notes can prevent Outlook from syncing as expected; removing them or adding a subject should allow syncing to resume
Regards,
-Norm G.

HT4839 Which apn setting should I use for my iphone 4 on net10

Which apn setting should I use for iphone 4 on net10

APN Settings for Net 10
Cellular Data
APN: att.mvno
Username: (Blank)
Password:(Blank)
MMS (Blank)
APN: att.mvno
Username: (Blank)
Password: (Blank)
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Max Size: 1048576
MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Type exactly whats on here on your settings.
Procedure:
1- Turn on your phone
2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
3. Goto Settings>General>Cellular>Cellular Network
At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
4. Get your paperclip take out the tray put in the Net 10 sim card
5. Goto Cellular>Cellular Network while it's searching for service
6. Type in your settings that I list above
7. Scroll back to your main setting (Do not press your Home Button)
8. Once you see your service up and running try out your web and send a picture message it should work.
9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
10. Do the process all over again
Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTune. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTunes. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

Hi..
here can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?
Not possible. You need to update to v10.6.8
Click your Apple menu > Software Update
Or update using the this download > Mac OS X 10.6.8 Update Combo
Then restart your Mac.

Which LKM is to be used for data from oracle to file

Hi All
I am new to ODI. Please help me in understanding this tool.
I want to know Which LKM is to be used for moving data from oracle to a comma seperated file etc.

Hi John
Thanks a ton... I was able to move ahead. I executed thinking all params are correct.
But it did not go thru and gave me this error:-
936 : 42000 : java.sql.SQLException: ORA-00936: missing expression
java.sql.SQLException: ORA-00936: missing expression
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
     at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Which Event Classes i should use for finding good indexs and statistics for queries in SP.

Dear all,
I am trying to use pro filer to create a trace,so that it can be used as workload in
"Database Engine Tuning Advisor" for optimization of one stored procedure.
Please tel me about the Event classes which i should use in trace.
The stored proc contains three insert queries which insert data into a table variable,
Finally a select query is used on same table variable with one union of the same table variable, to generate a sequence for records based on certain condition of few columns.
There are three cases where i am using the above structure of the SP, so there are three SPS out of three , i will chose one based on their performance.
1) There is only one table with three inserts which gets into a table variable with a final sequence creation block.
2) There are 15 tables with 45 inserts , which gets into a tabel variable with a final
sequence creation block.
3)
There are 3 tables with 9 inserts , which gets into a table variable with a final
sequence creation block.
In all the above case number of record will be around 5 lacks.
Purpose is optimization of queries in SP
like which Event Classes i should use for finding good indexs and statistics for queries in SP.
yours sincerely

"Database Engine Tuning Advisor" for optimization of one stored procedure.
Please tel me about the Event classes which i should use in trace.
You can use the "Tuning" template to capture the workload to a trace file that can be used by the DETA. See
http://technet.microsoft.com/en-us/library/ms190957(v=sql.105).aspx
If you are capturing the workload of a production server, I suggest you not do that directly from Profiler as that can impact server performance. Instead, start/stop the Profiler Tuning template against a test server and then script the trace
definition (File-->Export-->Script Trace Definition). You can then customize the script (e.g. file name) and run the script against the prod server to capture the workload to the specified file. Stop and remove the trace after the workload
is captured with sp_trace_setstatus:
DECLARE @TraceID int = <trace id returned by the trace create script>
EXEC sp_trace_setstatus @TraceID, 0; --stop trace
EXEC sp_trace_setstatus @TraceID, 2; --remove trace definition
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Which kernel module should I use for Marvell Yukon 88E8001?

Which kernel module should I use for Marvell Yukon 88E8001?
a. sky2
b. skge
c. sk98lin

I found this in the kernel''s /driver/net/Kconfig:
config SKGE
tristate "New SysKonnect GigaEthernet support"
depends on PCI
select CRC32
---help---
This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
This driver supports adapters based on the original Yukon chipset:
Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
It does not support the newer Yukon2 chipset: a separate driver,
sky2, is provided for Yukon2-based adapters.
To compile this driver as a module, choose M here: the module
will be called skge. This is recommended.
Looks like your module is "skge"

Which Datatype I have to use for Images in MS-Access Database.

Hi Friends...
I am Atif. I have stucked in a query. Please suggest me.
Which Datatype I have to use for Images in MS-Access Database ?
Thanks in advance..
Regards
Atif

Depends upon whether you are referring to a variable or the data type of the column in which to store the data. For a table you should use an OLE Object. For example, you could use something like the following to store an image into a Access table from a
PictureBox (sans OLE header):
Dim AccessConnection As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=C:\Test Files\db1 XP.mdb")
Dim AccessCommand As New OleDbCommand("INSERT INTO BlobTable (ID, BLOB) " & _
"VALUES (@ID, @BLOBData)", AccessConnection)
Dim PictureMemoryStream As MemoryStream = New MemoryStream()
Form3.PictureBox1.Image.Save(PictureMemoryStream, System.Drawing.Imaging.ImageFormat.Jpeg)
Dim BLOBData(PictureMemoryStream.Length - 1) As Byte
PictureMemoryStream.Position = 0
PictureMemoryStream.Read(BLOBData, 0, PictureMemoryStream.Length)
AccessCommand.Parameters.AddWithValue("ID", 7)
AccessCommand.Parameters.Add("BLOBData", OleDbType.LongVarBinary, BLOBData.Length, DataRowVersion.Current).Value = BLOBData
AccessConnection.Open()
AccessCommand.ExecuteNonQuery()
AccessConnection.Close()
Paul ~~~~ Microsoft MVP (Visual Basic)

Which Java program do I use for this game?

Okay, I'm programming a video game for my High School grad project.
Now, I'm just wondering, which Java program do I use for it? It will be 2-d, I'd like it to have SNES like graphics, and it will be a platformer, but kind of like Metroid. You will be able to change forms, from ice to water to a gaseous state, and you have different powers according to which form you're in, like forming an ice bridge in ice form, slipping through cracks in water form, and rising higher in a gaseous form.
Thank you for your help.

no, not if you did not code java before.
There are IDEs like Eclipse arround but that are not good at beginning because they are quite complex and don't take away the coding.
lg Clemens

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

Which cable connection do i use for exterior monitor for my macbook OSX version 10.7.3.

please help me figure out which port i need to use for this situation. Thank you for helping save this fail. Happy Monday.

Depends on what input plug you'll be using on your TV. VGA, DVI, Composite or HDMI. You'll need a Mini-DVI adapter and a cable from that to your TV. Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
(Composite is the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs.)
You'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs for VGA, DVI or Composite. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macbo o k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable
If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

Poll: Which LabVIEW version do you use for new projects?

I have posted a poll on the LAVA forums, here:
Poll: Which LabVIEW version do you use for new projects?
Thank you for taking the time to tell us your thoughts.

I'm giving this thread a bump to remind eveyone that we want to know your opinion. Please vote in our poll.
Thanks,

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

Photoshop Elements9 has a dark background which makes it difficult to use for a sight impaired person. Is it possible to change it to a light background.

Similar Messages

Maybe you are looking for