Photoshop, Epson 7880 and Dark Prints

I use Photoshop exclusively for printing to my Epson 7880. Recently upgraded to Snow Leopard ( 10.6.6 ) which has resulted in my 7880 prints being too dark. Printed beautifully under 10.5x. Looking for discussions on possible solutions or approaches. Anybody out there in the same boat? I have the latest drivers - at least according to Epson - and would be happy to upgrade to CS5 ( currently CS3 ) but only if there is good evidence it would help. Sorta desperate here, have orders unfulfilled.
24" 2.8 Ghz iMac, OS 10.6.6, Psd. 10.0.1

I have the Epson 7880 setup under 10.6.6 and Photoshop 12.0.2 and it seems to be working under this "Photoshop Manages Colors" Off (no color management) work flow:
http://www.gballard.net/photoshop/epson/cs5/
You may aso want to review Adobe's spin on the Dark print issue
http://kb2.adobe.com/cps/875/cpsid_87512.html
but it was also written for CS5...

Similar Messages

I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
Woody

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

Help me solve color and dark print issue with a new monitor recommendation!

I know, I hate "surveys" too. I'm thinking of attacking my color and dark printing issues w\LR and CS4, by investing in a new monitor. I currently have an 20' early edition Apple Cinema Display. The monitor is the last hardware (software) item in my current upgrade cycle. From those folks who are NOT having color or print problems, what displays are you using (or would recommend)? Ah, and price is an issue. Apologies in advance to those who think this is not appropriate use of the Forum.

Monitor calibration is the first port of call. Sometimes changing one item in a system is enough to show up a colour management issue. You suggest that the monitor is the last item in your upgrade cycle, what all have you changed? Computer, printer? There may also be a setting you have failed to set when you installed the new software, eg. have you remembered to set relative colorimetric with the black point compensation box ticked, disable colour management in your printer driver and put an appropriate colour profile for your monitor onto the new computer? You also need the correct profile for your printer/paper combination set up in Photoshop.
If you haven't calibrated your monitor, that on its own will give you poor prints, but all the other bits are needed also.
Jo

I have a new Epson R2000 and my prints are too dark. How do I get WYSIWYG?

I have turned off the color management on the R2000 and set Elements 10 to optimize for prints. I am trying to get WYSIWYG. This is complicated by a new LG Flatron IPS235 monitor. It is supposed to have the best factory calibrated color and Fry's Electronics said that it would be the truest, full range color. I have tried changing the mode to sRGB, photo mode, and user mode and the prints are always too dark. I would appreciate any help I can get. I am a scrapbooker working on photos of my world travel bucket list. At the rate I am going, I will kick the bucket before I get any photos printed. THANKS!

This goes against everything I have read about being sure that Photoshop controls the color.
Well, one can't believe eveything one reads. This problem comes up now and then on the forum pages, and we have been recommending to have the printer manage color, certainly not both PSE and the printer.
I have Epson and Lexmark printers, and I have it set up to let the printer manage color.
Works well on both units.
Thanks for getting back to us.

Leopard + Aperture 2 + Epson R1800 == very dark prints

Hi,
Before I upgraded to Leopard, I was able to get very nice prints from Aperture on my Epson R1800 printer.
After I upgraded to Leopard, the prints end up very dark. A bit of additional info follows.
My monitor is correctly calibrated.
I installed new drivers from Epson's website (v6.12), and I verified I'm using those, and not Apple's Gutenprint drivers.
In the print settings I turn color management off, and than select correct ICC profile in the Aperture that matches paper and quality settings. For example, for printing on Epson Premium Glossy paper with PhotoRPM settings, I select "SPR1800 PrmGlsy PhotoRPM.icc" profile. Hit print, and after a bit of time the print comes out of the printer very dark. This sounds like ICC profile got dropped someplace along the way (in Aperture? in driver?).
If I go the other route, and let driver/printer manage color by selecting either normal or vivid options in print settings, and than use "system managed" setting in Aperture, the prints come out bright (maybe even a bit too bright). However, in this case the colors are off. Very off. Skin tones are especially bad with strong yellowish cast (people on the prints look if they were seriously sick).
Has anybody managed to get usable prints from Aperture 2 + Leopard combo on Epson R1800? Or any other comparable Epson printer (R800, R2400, new R1900)?
Searching forums, I found a lot of articles discussing Leopard and Epson printers problems for Adobe products (CS2/CS3/LightRoom), but not much for Aperture 2.
Unrelated question... I attempted to ask this in Aperture forum, but there was no post link. Do I need something special to be able to ask questions there?

Well, believe it or not, with the help of Epson support on the phone, I've figured this out. First of all, there is definitely a problem with Aperture's color management. What used to work (setting a color profile in the Aperture print dialog, and selecting "no color management" in the printer dialog) definitely does not work at this point.
If you want color management, what you have to do is select "System Managed" in the Aperture print dialog, and select "Color Controls - Epson Standard" in the Epson dialog. What this does is select the standard Epson profile for the paper you have selected. For example, if you've chosen Epson Premium Glossy Photo Paper, the printer driver will use the "SPR1800 Premium Glossy" profile (Epson's standard profile for that paper, assuming you've downloaded it). Of course, that gives you Epson's version of what you want to print. If you have created your own profiles, using a spectrophotometer for example, you need to get the printer driver to apply YOUR profile instead of Epson's.
Here's how to apply your profile: Open Colorsync (in the Utilities folder), and select "Printers" in the Devices menu. Under the printer model, Stylus Photo R1800, for my case, select the profile for the paper you're interested in, say "SPR1800 Premium Glossy", and look on the right side of the window at "Current Profile:". Click the down arrow, and select "Other". Navigate to the profile you've created, and click "Open". This will set the profile you've created as what the printer driver will use when it thinks it's applying the SPR1800 Premium Glossy profile. Set other paper profiles (e.g., "SPR1800 Enhanced Matte") to whatever profile you've created for those papers.
Now, when you select "System Managed" in the Aperture dialog, and "Color Controls - Epson Standard" in the Epson dialog, it will apply your own profile.
Hopefully, Apple will fix the problem with color management, and we'll be able to go back to color management as it was before. In the meantime, this is the only work-around I've found.

Problem with Epson WF600 and Mavericks printing

My Epson WF600 no longer is recognized wirelessly, by my Macbook Pro, when I go to Add Printers in my System Preferences. I installed the new Drivers for Epson (I think), but unless I connect the printer with a USB cable, my laptop wont print wirelessly from the Epson. Please help.

Try resetting the router (power off 15 secs, then back on), then reset the printer same way.
Also reset Printing System:
OS X Mavericks: Reset the printing system
How did you install new drivers?
The new driver paradigm for OS X is: manufacturers give Apple the current drivers to keep on their servers. It gets installed automatically when we add the printer in Print & Scan prefs. You can force OS X to re-find both installed and available drivers by resetting the printing system.
Find current version of drivers from this:
OS X: Printer and scanner software available for download

[FIX] Darker prints and color shifts when printing from Lightroom 2

Hi,
The problem :
When printing RAW or TIFF files from LR2, you get a printer output that
is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 3800 with the latest Windows driver
(6.50 - which is rather old by the way). The workaround described below
works for me under Windows XP SP3. It should also probably work with
other systems/printers/drivers. Use at your own (minor) risk.
The "official" procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the
profile dropdown list and select the ICC/ICM paper/printer profile that
you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. **Disable the color management from the driver's side** (in Epson's
drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, **this doesn't work** for many of us and this produces a
print that is dark and has color shifts as mentioned above. Note that
the same image prints correctly from QImage or Photoshop CS3 (that is,
the printer output corresponds to what you see on your calibrated
display).
Apparently, although color management has been (allegedly) disabled in
the driver, there's something wrong between LR and the driver which
makes that *both* LR and the driver are still trying to manage colors.
In other words, the "No Color Adjustements" option of the driver doesn't
seem to work with LR.
The workaround (found after hours of hair pulling and paper and
expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom |
ICM
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set **both** the "Input profile" and the "Printer profile" fields to
the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR,
then also select Pro38 PGPP in both "Input Profile" and "Printer
Profile". This has actually the same effect has disabling color
management in the driver (what "No Color Adjustements" should normally
take care of).
That's it. When printing, you'll get exactly the same color results as
when printing from QImage or Photoshop. No more dark prints. No more
color shifts.
One might think that the bug is in the Epson driver but in that case,
QImage would have the very same problem. So I tend to think that the bug
is on the Lightroom side.
Note: Although Photoshop CS3 produces a correct printer output, it
demonstrates the same problem as LR when using the "Match Print Color"
option for soft proofing. But in that case, only the preview colors are
wrong. The printer output is ok. Which also tends to demonstrate that
Adobe has the problem, not Epson. Or maybe both... :-) .
Don't ask me why some users have the problem and other don't.
Hope this helps.
Patrick Philippot
MainSoft Consulting Services
www.mainsoft.fr

A sincere thank you for your reply, Michael. Sorry about the "it just doesn't make sense" shortcut. I have been trying to solve this issue since LR 1.1, spending dozens of hours on different trials and digesting everything written on this forum and the B9180 forum about color management and double profiling. My shortcut was a summation of my experience (and my frustration) but doesn't really advance the conversation. Here are some data that should be more useful in diagnosing the problem.
I am running Windows XP SP2. I calibrate my monitor monthly with the Spyder. The reason I suspect this may be an issue of double profiling is because the results (moderately strong magenta overlay plus an increase in contrast) match what more knowledgeable people than I on this forum describe when double profiling occurs. Perhaps I shouldn't presume it is double profiling, and follow Patrick Philippot's lead in naming the problem "color shifts." Patrick does refer in post #2 of this thread, however, to obvious double profiling.
I certainly do have a successful and consistent print method. With PS CS3, and either my Epson 1280 or my HP B9180, the output is almost always dead on. Here is how I do it. In PS from the print dialog box, under color handling I always choose "Photoshop manages colors." Then under printer profile I select the profile designated by the manufacturer for a particular paper/printer combination. Then in the printer driver I disable printer control of color. With the Epson I check the box "Off (No Color Adjustment)." With the B9180 I choose the option "Application Managed Colors." While I sometimes may tweak the final output, these procedures have served me well with PS for several years.
Contrasted with my positive PS experience, my experience with LR printing has been inconsistent. I regret having to be so imprecise but truly sometimes LR produces accurate results that match the calibrated monitor, but most of the time it does not. I use standard procedures with LR that parallel the PS ones described above. In LR's printing panel, under color management, I specify the correct profile, just as I did for PS. Then in the printer driver I use the same procedures I use with PS. Most of the time the prints have the magenta overlay and too much contrast.
BTW, the inconsistent LR printing only takes place with my HP B9180. I have never had any problem with off-color LR prints with my Epson 1280. Again, I emphasize that I have standard procedures that always work with PS (no matter which printer) and LR (but only with the Epson).
Unfortunately the LR printing problems are intermittent. Some of the time (perhaps 20%) LR produces fine prints in the B9180, indistinguishable from PS prints. When LR is printing well, it will continue to print fine until "something happens" and the output shows the color shift. This means I do not get a random sequence of good-bad-good-bad prints, but rather good-good-x factor-bad-bad-bad. Ths problem is that I do not know what this "x factor" is. Once, when LR was giving me accurate output, I simply changed the default printer (Control Panel-Printers and Faxes) from the B9180 to my Samsung 1430 laser; immediately afterwards the LR output colors shifted. Did LR react to this change in default printers? Another time I had good LR printing success with version 1.2 but ran into the problems described above when I upgraded to version 1.3.
Sorry for the long post. I am hoping that someone will see something that I am missing and provide a hint. I think, though, that Patrick is correct when he states, "I tend to think that the problem is with LR. After all, similar issues (obvious double profiling) are observed only in LR but with various printers."

Leopard, WM Fusion and Brother Printer

Hi all,
I am a totally new MAC convert. I have a brand new IMAC (Which is great) but I have to have to run Windows Office (Excel & Word) . I opted to run WM Fusion with a Windows Vista virtual machine. Every thing works fine except that I cannot get my Brother Laser Printer to work in both the Virtual machine and MAC environments.
Suggestions would be very gratefully received.

VMware is a hardware emulator software that emulates all the hardware devices from your mac computer to make it like your desired os.
1. Just make sure that your vmware tools are all installed and enabled.
2. Also make sure that you have all the security updates downloaded. (ofcourse make
sure your going to use a license cd key of your os to be able to do that)
3. Click on Virtual Machine tab, go to settings, click on usb and make sure
that enable usb 2.0 support and automatically connect usb devices are checked.
4. Download and install a win vista driver for your printer's support site,
if ever your printer is incompatible with win vista, then that may be the issue
why it isn't working.
My Epson Stylus rx595 works like a charm by doing that, both the epson scan and the printer withtout
any conflict on my mac computer. It may sound a lot of work but it really pays
off.

Dark prints using CS5 & Epson R2400 ongoing problem, now new PC and magenta cast

Have tried every combination of set up in trying to solve problem. Had One Eye (now defunct lamp) various experts etc etc but compensated for dark prints by having screen lightened to bizarre point. Now having a new PC am faced with massive magenta cast. I really don't want to buy a new printer but have had the dark print problem since I got it. Have spoken to Adobe and Epson at length but eventually washed their hands. I feel it is something to do within the computer set up or Photoshop - don't think its printer problem. All drivers updated regularly. Thought it could be monitor problem but don't really think this is the case.
Any ideas welcome as I think I have tried everything. Use Windows 7.
Am retired and not very technically minded! Serious amateur photographer.

I have an Epson 1280 printer, and I have the same problem with prints. Part of the problem are the different color profiles in the monitor and the printer. The other problem to deal with is the type of photo paper used. While looking at web sites, I found that the ICC Color Profiles for the printer are on the install disc and are not automatically installed. One of the links describes which folder to install the profiles on both Mac & Windows computers.
As station_two wrote, calibrate your monitor first.
Below is a link about calibrating.
http://dpexperience.com/2009/12/18/calibrating-your-monitor-to-your-printer/
The next link is for printer tips
http://www.normankoren.com/printers.html#Printer_tips
And some more here
http://www.digitaldog.net/tips/
I do not have an exact answer for you because I have not figured it out myself, but here is what I have been doing on my prints. I might recommend that you work on a copy of the original.
In the Layer floating window, create a New Adjustment Layer by clicking on the half black/half white circle, and choose Hue/Saturation or Color Balance or Selective Color. Because the prints come out too red, you want to increase the green sliders, which is the opposite of red, and/or decrease the red. (Layer>New Adjustment Layer>Color Balance) is another way to do it.
Under the menu item Image>Adjust Levels. Move the center triangle at the bottom to lighten the mid-range, or use the center dialog box and change it to 1.20 or 1.30, for example.
Now press Print with Preview (but you really are not going to print).
When the dialog box comes up, make sure the Print Space: dropdown is set to Epson Paper or whatever you are using.
I have been using Relative Colorimetric. Press Print. Another dialog box will come up. At the bottom will be a button for Preview, which will generate a preview of what the photo will look like if printed.
Keep going back to the original and double click on the Adjustment Layer and adjusting it until the Print Preview looks ok.
Be sure when you actually print that the paper and color settings in the Epson dialog box match your settings in Photoshop. There is a dropdown that has Print Settings or Color. Often they don't match unless you print several photos in a row. I have found printing at the lower settings (less than 360 dpi) also messes up the color.
It is not an excellent solution, but until I can figure out more, I am in the same boat as you.
I'd suggest saving the lightening and color adjustments as two different Actions.

Dark Prints with Photoshop CS3 and CS4 but not Lightroom

Hi, To start,I have calibrated my dell monitor with eye-one pro as well as my epson 7800. i am running vista 64 bit on my PC...
When i use photoshop (CS3 or CS4) the images look fine on the screen and come out really dark on the printer. When i use lightroom, the images look fine on the screen and fine on the printer.
Any guidance on how to "fix" photoshop would be appreciated. By the way, in photoshop print dialogue, i color manage the document, photoshop manages the color, the printer profile is set to the I-1 custom printer profile, rendering is perceptual, and black point compensation is checked.
Thanks,
Joe

I manage color and service bureau printing at the college I work for, and we've been fighting the upgrade to CS4 for some time. Here's what we have so far.
Apple dual G5 machine with 10.5.8
Adobe PS CS3
Adobe PS CS4
3 x Epson 4800 Pro printers using an IP connection and using Driver version #6.11
We manage color with custom created profiles in eyeOne with eyeOne pro hardware.
When moving to CS4 for printing prints have gond dark and the color has taken an odd shift.
When printing with CS3, we get consistent color and density
All things being equal in the print settings for each version of PS.
I have heard that CS4 addresses the printing system differently (using an updated printing api from Apple) is this true?
When running prints from within another app (any app really) that prints directly through the OS, we get similar results as CS4.
The best explaination that we've been able to get is that the (epson) print driver is operating on the older api calls, and that when the OS (or CS4) is operating on the newer calls, the color and density issues arise.
Can anyone verify this?

CS4 and Epson 11880 dark prints

I read about some issues with dark prints and CS4. I am able to print correctly to an Epson 9800 and 3800 but the 11880 prints dark when using CS4 (color or b&w). I use OS X 10.5.5 and have the latest drivers and firmware. Is this the same issue others are having? Any ideas for a fix?
Settings:
Photoshop dialog = Photoshop manages color
Epson driver = No color management
Print = dark output
P.S. The soft proof on the screen looks like it should (similar to CS3 soft proof) but the print does not match the soft proof, like I said too dark.
Thanks in advance for any help or info...
Jeff

Here we go again.
The first thing I would do is try the ColorSync workaround to determined if double profiling is going on here.
You could also try convert to profile (paper/printer) and then choose Printer Manages Color in the PS dialog and then turn off CM in the driver. See if it makes any difference.

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/

What is your screen resolution?
What operating system?

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1654
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1652
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Photoshop Elements 10 and Epson xp-810 Printer

I just purchased an Epson XP-810 printer. I can print from Photoshop Elements 10 just fime. I need to know how to set the printer up so I can import from its scanner.
Can anyone help me with this?

Thanks!
Date: Mon, 25 Nov 2013 20:14:45 -0800
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 10 and Epson xp-810 Printer
    Re: Photoshop Elements 10 and Epson xp-810 Printer
    created by Barbara B. in Photoshop Elements - View the full discussion
In PSE you need to install the TWAIN driver:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop -elements-11.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5874804#5874804
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5874804#5874804
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5874804#5874804. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Photoshop, Epson 7880 and Dark Prints

Similar Messages

Maybe you are looking for