Photoshop error, everything goes white.

Hi! So I just recently bought my new Intuos 5 touch, after I installed it my photoshop has gone completely mad. Everything goes white and I can't see any of the buttons. Has this ever happened to anyone? (Checked embed screenshot)
The only way I can "temporarily" fix it is to guess where the x-button is, and press enter to save the image I was working on and then reset photoshop. But the problem just re-occurs like 5 minutes later.

There are some very long posts about Wacom dirvers and Mavericks OS. Is this you?

Similar Messages

Can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this tim

can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

I get a 3914 error when I try and restore my iphone 4. my screen goes white and then all different colors. what should I do?

i get a 3914 error when i try and restore my iphone 4. my screen goes white and all different colors what should i do

first try a different usb cable, remove all other usb devices, and try a different port in back on desktops if possible. if no luck see these
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

I have firefox 4 installed. when i go to one web page everything is fine; but, when i try and go to another my screen goes white and i have to restart my computer to be able to go to anyh other web page

when i go to a website and try and go to another the screen goes white and nothing ever happens. i have firefox 4 installed

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

6280 goes white screen when I sync with Vista

Hi all,
My 6280 goes white screen and reboot when I sync after a 350 items uploaded to my laptop under Vista Premium Family Edition. I've got this problem either connected through the cable or bluetooth.
I use the latest version of PC Suite, but I do not have upgraded my 6280.
If someone can help me, thanks by advance.
(and of course, it worked perfectly with my old desktop computer under XP ...).
Richard.

I mean to sync with the syncronisation feature (inside the PC Suite menu) to an Outlook 2002, under Windows Vista.
Anyway, I solved my problem : I had a corrupted record in my phone's contacts (the phone was always rebooting on the same record number, when I tried to export data). I have deleted all the phone's contact records and then reloaded them from Outlook, and now everything works just fine.
Backup, backup, always backup ...
The question is : how could I have corrupt a record in my phone's contact ?
Thank you for answering me ;-)
Richard.

Screen Flickers, Goes White, Goes Grey but Computer Responds Normaly

Ok, this has to be the right place to post, apparently I put this in the wrong thread originally. This is a new one on me. This started out of the blue. Sorry for the long post but I was trying to think of as much info as possible.
The screen on my power book laptop started flickering and fluttering and then it would suddenly start going white in the middle and work its way out. It actually goes kinda frosty blue for a second and there's an after image of whatever was on the screen last until the white takes over the screen, but the sound keeps playing. I've seen this happen to LCD's before when they're dieing (whimper) but when I close the lid and let my laptop go to sleep and then open it again, it comes back up like nothing even happened. The dieing LCD's never did that, they just went, hope you had all the info off that hard drive, say goodbye to old Broadway for me (you get the picture, or not ;o) ).
Then yesterday it did something new (ish). I've seen it do a couple of variations of this so far so bare with me, I'll try to get the info as accurate as I can. The screen did it's "going white act" and suddenly went grey, only it wouldn't come back. I put it to sleep, I turned it off, turned it back on, etc. It chimed, it booted up, it ACTED normal! Except that the screen was a light shade of grey! And then I would boot it up and it would randomly come back for a while and it would start all over. Flicker, blue/white/ghost, grey, scream (me, not the computer). And if the screen went out while the computer was running, the programs beneath it still responded to the keyboard commands. I could quit out of programs or even use the power and return key to turn the computer off, I could use the dimmer keys to turn the brightness to darker and lighter shades of grey (it's mocking me), and I was even able to eject disks from the drives. Things not possible when I had a kernel error two years ago (and I haven't seen the dreaded screen, ha, haven't seen much of anything!), and it doesn't seem to fit the description of the video display problems from here http://support.apple.com/kb/HT1573?viewlocale=en_US (but I could be wrong). At one point, I took out the battery and unplugged the power supply and left it a few minutes and the next time it booted up it did it just fine. So when it went out again I tried that again (which I don't like doing!) but that time it didn't work! After a few hours it randomly booted up on the battery and has been working ever since. It's so random I can't seem to track it!
I saw one forum on another site where some described a similar problem and blamed it on installing the last Flash player update which is when my problem started. My computer is old and kind of beat up. It was carted around to school for the first 5 years I had it (which includes the usual number of mishaps) and I had one of the hinges get stuck and broken too (rather spectacularly, pieces flying everywhere) but my dad was able to glue a support around it to stabilize it. But this? This started very suddenly and while it did happen right after I installed the player from the Adobe site, but I'm having a very hard time buying the Flash player theory from the other forum. Any ideas, things I can try, or is it Genius bar time? I suppose if I uninstall the player and it goes away that was the problem, any ideas how I do that? Sorry, again, for the long post but I was trying to think of as much info as possible. Thanks.

Hi, Kaytebb. It sounds to me as though you have a video cable problem.
Can you cause or change the video misbehavior by adjusting the tilt of the display, or even just by jiggling the display a little? If so, odds are that the cable that carries the signal from your Powerbook's GPU is damaged where it passes through the left hinge. I'm guessing that's the hinge that broke a while back, and that the damage got its start then, though symptoms might not have appeared for some time afterward. The sleep light and backlight cables go through the other hinge. All the cables are very delicate, but the video cable more so than the others: it's actually a bundle of tiny coaxial cables, each containing about 20 nearly hair-thin conductors, and the whole bundle is well under 1/8" in diameter. If any of the cables that make it up gets chafed or cut by a sharp broken edge, or if the whole bundle or any part of it gets pinched, almost anything can appear on the screen. The usual remedy is to replace the entire display assembly, because taking it apart to replace the cable is a miserable job. In your case, with the broken hinge already, there would be no point in replacing only the cable. But replacing the display may cost more than the machine is worth. The computer is now classified as "obsolete", so Apple won't work on it at all, not that you'd want to pay Apple's price for the work anyway; buying a used display (preferably with some kind of warranty) and installing it yourself is the only way it's likely to be worthwhile at all.
You don't say which Tibook model you have, but take-apart instructions for all of them are available here:
http://www.ifixit.com/Guide/Mac/
400/500MHz processor = "Mercury"
550/667MHz without DVI port = "Onyx"
667MHz with DVI port and faster = DVI

Computer says almost out of disc start up space the. Screen goes white after signing in. How do I clear space so I can sign in?

I get a message that says low disc space for start up when I go to sign in. After I do sign in the screen goes white. Is there any way to delete items so I can sign in and clear more disc space. I don't want to lose everything and apple is not covering a tech call.

Start up in Safe Mode http://support.apple.com/kb/HT1564

Flash CS5 problem: Movie Test - stage background goes white

Hi everyone,
I am having this problem where my stage background goes white upon movie testing and it doesn't matter if I've set the stage background to green, blue, etc.. However, when exported, everything seems to be fine. I've checked all configurations in my preference menu, but nothing from the settings is causing this. When I exported the file and play it on Flash Player 10, the background is black. Attached is a screenshot of the occurred problem. Could this be a bug or does anyone have a similar situation? Thanks!

Thanks for the wonderful quick fix simPod_, I've deleted my mm.cfg file, but somehow this isn't permanent. It should do for now except the hassle of deleting the file and restarting flash. If anyone else have a permanent solution to this, I'll gladly appreciate any responses. Thanks!

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Online games will load and I can play. But then game goes white.

When I play an online game it loads up ok and I can play the game. But when iv been playing it for a while the part of the screen were the game is goes white. The rest of the page stays just like it was. Iv tried using different browsers Internet Explorer, Firefox, Opera and Google Chrome. Iv found that Internet Explorer will let me play a game the longest before it goes white. My OS is Windows XP (32-bit) the browsers im using are Internet Explorer 8.0.6001.18702 and Google Chrome 23.0.1271.97 . The flash player is the latest one 11.5.502.135 and pepper flash is the latest one 11.5.31.5 . Iv tried everything it suggests in the flash player help section and I still carn't play games to the end of the game. Iv seen this question about screen turning white a lot but none of the questions iv seen about it have not got any reply's. Does that mean that it can't be fixed.

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
 Cheers, Tom

Entering Time Machine From Mail Gives Photoshop Error!

Hello everybody,
This is a very strange one: If I enter Time Machine when Mail is in front, and if Photoshop is opened, I always get this error from Photoshop: "Could not complete your request because of a program error."
What happens is this:
• I choose the Enter Time Machine command (Entrer dans Time Machine in French, in fact).
• I hear a beep, but the computer goes right into Time Machine, without a hitch.
• I can do anything I want in TM.
• After that, when I activate Photoshop, I see the Photoshop error dialog. I close this dialog and Photoshop works perfectly well.
This happens whether a file is opened in Photoshop or not. It does not happen when Photoshop is in front, +*it happens only when Mail is in front*+.
I am puzzled...
RTP

Hi joshz,
Thanks for jumping in. Well, this is most surprising. There is no record of any error caused by this, no reference to this one way or the other, no error of any kind... I searched with different keywords, Adobe, Photoshop, Time Machine, TM, Mail, to no avail. Anyway it's easy as I can reproduce this error dialog at will: With Mail in front, I enter TM, hear the beep coming from Photoshop (!!!), get out of TM and there it is in Photoshop.
Then I look into the console. An error reported by this event should be the last one and dated correctly, right? Well, there is nothing new.
What literally baffles me is the fact that this happens only when Mail is the active application when I enter TM. I tried every other combination to no avail.
Other info about memory in my answer to orangekay.
I must say that it was very thoughtful of you to translate your post in French. I do appreciate the courtesy. And yes, your French is certainly acceptable, taking into account that it is not your mother tongue and that you probably do not use it very often. The reason why I mentioned the command name in French is that I was not sure of the exact name in English as my OS is in French. OK, I speak it with what my Hoosier friends call "an accent". But then I tell them... "Look who's talking!"
Roger, From Up North

Satellite P20-771 with Windows 7: no sound and screen goes white

Hi all.. I installed Windows 7 Ultimate on this machine. I tried latest Realtek AC97 drivers, the driver installs and everything seems fine but no sound is produced at all. As for Video Card I used some modded Nvidia Drivers 97.xx I found at Guru 3D.. there's no way to activate AERO, the pc hangs if I try.
I set the system to turn off the screen after 10 minutes of no use.. it goes white instead. How so? Any clue? Also, does anyone know if there's any modded driver that can run AERO? All the ones I tried did not work.

No, it's just a driver issue. I once had Vista running aero on an Nvidia 5200. It seems that FX 5700 can run Aero with Nvidia Modded Drivers 97.46 as for this post: http://www.vistaheads.com/forums/microsoft-public-windows-vista/78791-driver-per-toshiba-laptop-p20-771-nvidia-ge-force-fx-5700-trovatiiiiiiiiiiii.html
However those same drivers won't enable aero under W7.
Anyone knows anything about the audio issue and the white screen? I tried different modded drivers.. some will produce garbage on screen, other will reboot the machine if DX9 is involved. These 97.46 won't produce garbage but for example won't run Google Earth (hang the program) while 174.xx can...

Keep getting firefox is not responding and screen goes white I am not very comouter literate so need a easy to follow answer am using windows 7 thanks

I am using windows 7. my computer keeps saying firefox is not responding. the screen goes white and everything freezes. I am not very computer literate! so I need a easy to follow answer to my problem. This computer is only 5 months old and its driving me nuts! Sometimes it can take over an hour to get the thing to work!!!!! thanks for your time look forward to hearing from you

Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*http://www.mozilla.org/plugincheck/
*Shockwave Flash 10.0 r22
Update the Flash plugin to the latest version.
*https://support.mozilla.org/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/

Photoshop error, everything goes white.

Similar Messages

Maybe you are looking for