Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

Similar Messages

HELP....Error Message...Photoshop.exe-Entry Point not found

Hello
I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
Photoshop.exe-Entry point not found
The procedure entry point
?terminate@struturalimageeditingYAXXZ
Could not be located in the dynamic link library Patchmatch.DLL.
I have tried to redown load but keeps saying that it is downloaded
Help please
Bobbi-Lee

Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.

Error : Photoshop.exe - Entry Point Not found

I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
Photoshop.exe - Entry Point Not found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
-Jitu

Install SP3. It's required in order to run Photoshop on Windows XP.
http://www.adobe.com/products/photoshop/tech-specs.html

Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

I am having a problem opening 32 bit version of Photoshop CS5 in Windows 7. The 64 bit version opens fine, but when I try and open the 32 bit version, the following window opens: “Photoshop.exe – Entry Point Not Found” X The procedure entry point_CFCreateApplicationRepositoryPath could not be located in the dynamic link library CoreFoundation.dll. My only option in this window is an OK button. If I click this button several times, the program eventually opens. Below is screen shot of the error window.
Thanks,
Matthew Kraus

Thanks Zeno and others. Uninstalling Quicktime and then reinstalling it was the fix.
Thanks again,
Matthew Kraus

Owl Orphanage: Photoshop.exe - Entry Point Not Found

Using Photoshop CS5 64 bit on Windows 7. New problem recently started. Whenever I try and open PSCS5 I get the following error. I then click OK and PS opens without further problem.
OWL Orphange: Photoshop.exe - Entry Point Nont Found. The procedure entry point ONPreviewLayerRelease could not be located in the dynamic link library ONImaging.dll. Any suggestions?
Thanks,
Matthew Kraus

Did you use their installer to install your copy of the plug-in?
This is the list of files put in place by OnOne Software's Perfect Resize on a Windows 7 x64 system for 64 bit Photoshop:
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)
05/17/2011 09:40 AM           112,640 ONPSEmulator2.dll
05/17/2011 09:40 AM           869,888 onOneCoreFoundation.dll
05/17/2011 09:40 AM           505,856 ONImaging.dll
05/17/2011 09:40 AM           101,888 ONDocument2.dll
05/17/2011 09:40 AM           411,648 onOneWelcomeDialog.dll
05/17/2011 09:40 AM           250,368 OnOneWidgets.dll
05/17/2011 09:40 AM           345,088 onOneToolbox2.dll
05/17/2011 09:40 AM         1,198,080 icuuc42.dll
05/17/2011 09:40 AM         1,409,536 icuin42.dll
05/17/2011 09:40 AM             3,072 icudt42.dll
05/17/2011 09:40 AM           237,568 glut32.dll
05/17/2011 09:40 AM           147,968 ONCore2.dll
05/17/2011 09:40 AM           272,896 glut64.dll
05/17/2011 09:40 AM           350,720 onOnePR7ProEdCheck.dll
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Panels\onOne
05/17/2011 09:40 AM               233 onOne Palette Config.txt
05/17/2011 09:40 AM             4,681 onOne.jsx
05/17/2011 09:40 AM           610,989 onOne.swf
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Perfect Resize 7.0 Professional Edition.plugin
05/17/2011 09:40 AM         1,145,344 GFAutomation.8li
05/17/2011 09:40 AM         3,138,560 GFFilter.8li
05/17/2011 09:40 AM         1,470,464 GFFormat.8li
05/17/2011 09:40 AM           317,440 onOneActivationToolbox.dll
05/17/2011 09:40 AM           411,648 onOneWelcomeDialog.dll
-Noel

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

Please Help me!
I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
AfterFX.exe - Entry Point Not Found
The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
Mylenium

ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

TREXFilter.exe - Entry Point Not Found / sccex.dll

Hi,
Recently we've updated our TREX to SAP Netweaver 04 Version: 6.1.16.02 Build: 6116000416
When logging on to the TREX server several popups show up with errormessage:
TREXFilter.exe - Entry Point Not Found
The procedure entry point CUCheckForEmbeddedObject could not be located
in the dynamic link library sccex.dll.
In EP
(SAP Netweaver 04 EP6 6.0.16.0.0
NW 04 EP6 KMCollaboration 6.0.16.1.0)
it's not possible to index any index (index administation).
Server status in TREX monitor is all green.
Anyone seen this before?
Any help would be welcome.
Regards,
Mark

Hi,
I have the same issue with TREX 6.1 revision 25 now...
Message on OSS open but still no answer.
The pop-up is preventing TREX from processing the outstanding requests in the Queue...
Any ideas?
Kr,
Michael

Photoshop.exe entry point not found

any ideas please?

Nobody can tell you anything without proper system information and other technical details like the crash logs. Entry point errors usually point to incompatible drivers or missing system libraries.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Mylenium

Photoshop.exe - Entry Point Not Found error

I updated Photoshop and Bridge CC last night. Afterwards, I was unable to open up Photoshop CC getting this error message. The box has a lot of jibberish but ends with "could not be found in the dynamic link library PatchMatch.dll
I can however open up Lightroom and ask it to Edit in Photoshop and it opens up doing it that way. I have Windows 7 64 bit and had never had a problem until last night.

So you're suggestion going thru Windows Control Panel to uninstall it. Then I can re-install it thru the Adobe Creative Cloud? Thanks for you reply. It did occur to me that it might be an installation problem but just wanted to get an additional opinion.

Entry point not found msvcr110.dll error

I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

NImax.exe entry point not found TDMS_GetDataValueEx in cviTDMS.dll

I have a remote PXI-8108 and I'm trying to create a task in MAX. I have no other tasks as this is my first attempt at creating one. The following sequence is performed on the remote system: left click on the PXI-6713 under "NI-DAQmx Devices" --> create task --> generate signal --> analog output --> voltage --> ao0 --> default name of "MyVoltageOutTask" --> click "Finish"
An error window titled "NIMax.exe - Entry Point Not Found" pops up with the following message: The procedure entry point TDMS_GetDataValuesEx could not be located in the dynamic link library cviTDMS.dll.
The only option is to click "OK", at which time the box continually reappears. the only way to get rid of it is to kill MAX in the windows task manager. When I restart MAX, the remote system data neighborhood has a broken task under it, and clicking on it locks the program up (needs another kill in windows task manager). The only way to get rid of it is to reset the remote system's DAQmx configuration and start over.
I have reinstalled NIDAQ 8.9.0, reset the remote system configuration in MAX, updated/reinstalled all the software on the remote system (so that it matches the host system). not sure what else to try. I figure this should be an elementary step: I've done it plenty of times with simulated devices on a host system. Not sure why the remote system is giving me problems.
Solved!
Go to Solution.

I was able to do this on an 8196 controller no problem with DAQmx 9.0 on the controller and my computer having 8.9.5. Updating to 9.0 or even 8.9.5 should update MAX and hopefully get rid of what you are seeing. You are correct that the host and controller should have the same driver version so make sure you update both of them together. It is quite strange that the error is linking to a LabWindows/CVI dll file. Are you using CVI RT on the controller?
Doug Farrell
Product Manager - Condition Monitoring
National Instruments
National Instruments Condition Monitoring

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Similar Messages

Maybe you are looking for