Photoshop Generate Assets is not Dimensioning Correctly

I'm using Photoshop's generate assets to create smaller images for the web, but specifying a dimension is not working. For example I have an image that is 3871 x 1890. I renamed the layer to 1024 x 500 image.jpg. Instead of an image the is 1024 x 500, I got an image that was 1021 x 367. Another image that was 2084 x 1255, I renamed to 500x? image.jpg and got an image that was 268 x 162.
Am I doing something wrong? I saw this question asked in another post, but there was no response. Photoshop Help | Generate image assets from layers | Photoshop CC

I use a PC

Similar Messages

Photoshop not opening correctly

My photoshop CC 2014 does not open correctly. A window pops up and says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Please someone help me, Thank you.

You must probably have to re-install your application.
Next time you post, please at least mention your platform, Mac or Win.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Photoshop cc generate assets doesn't resize all images correctly

I have a stack of images, and I'm using Photoshop CC's new generate assets to produce two versions of each. One at current size (retina), one at half size (normal). Each layer I'm exporting has this naming format "[email protected], 50%image1.jpg".
When I generate assets, not all 50% scaled images get scaled down. Some that should be half the size are the same dimensions as the retina version. Other images scaled down by 50% are correctly resized. It seems to be random.
I have tried variations of scaling, 25%, 200%, renaming the layers, turning generate assets off then on, re-opening the psd, restarting photoshop. None of these seems to make a difference.
Anyone else experienced this, or have a solution?

I have a stack of images, and I'm using Photoshop CC's new generate assets to produce two versions of each. One at current size (retina), one at half size (normal). Each layer I'm exporting has this naming format "[email protected], 50%image1.jpg".
When I generate assets, not all 50% scaled images get scaled down. Some that should be half the size are the same dimensions as the retina version. Other images scaled down by 50% are correctly resized. It seems to be random.
I have tried variations of scaling, 25%, 200%, renaming the layers, turning generate assets off then on, re-opening the psd, restarting photoshop. None of these seems to make a difference.
Anyone else experienced this, or have a solution?

Photoshop Generator: Unbound Layer Mask do not render correctly

I'm a huge fan of the Generator feature in Photoshop CC. However, there seems to be a problem with layer masks: If you unbound the layer mask from it's content layer, the generated images will not match the actual image. It seems, that the layer mask is positioned in different way.
Correct
Incorrect
Full Image
Layers
(no difference between bound & unboucn layer mask)
Is this the expected behaviour?
I'm using the latest Photoshop (14.2.1 x64 on OSX 10 Mavericks)

David,
I assume you mean in the edited PS TIFF file:
In different cases I have either:
A. A TIFF file with layer a layer mask
B. A TIFF file with multiple layer masks
C. A TIFF file with an alpha channel mask
D. A TIFF file with multiple alpha channel masks
E. A TIFF file with any combination of the above
the outcome is the same, they all do not display correctly in Aperture. It does not seem to matter if the file was opened in PS from Aperture via the open with external editor command or if it was worked on outside Aperture entirely then imported. I do have maximize compatibility in PS checked (though I understand this is only for PSD files, though perhaps I am wrong here)
any thoughts?

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Asset reports not generating error message showing

Dear Guru's
I need ur help, I am not getting any asset reports, i run depreciation. when i am going to generate asset reports in T.code AR02 and S_ALR_ series reports error message showing "Fiscal year not yet made change", I closed fiscal year and open new fiscal year. I am not getting any asset reports from assets purchased ,
Client fiscal year is Calender year, In 2004 fiscal year all assets updated in sap that fiscal year also i am not getting reports. i run deprecial upto 2006.
Pls help me this is very urget
Thanks & Regards
Satish

Is correct,
The current fiscal year should be open othere wise it is not possible to run reports.
You can have only 2 years open
Run depreciation fiscal year xxxx (when there are assets for depreciation)
close old fiscal year xxxx
open fiscal year xxxxx
Here you found how to do this
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting

Exported Motion Generator not rendering correctly in FCPX 10.0.1

Hi
I have a problem with exporting a generator from Motion 5 to FCPX 10.0.1.
1) I created a sequence of a page of a book opening then closing. I created this in Motion 5, and exported it as a Generator to its own category and folder
2) I have found that in this folder a movie of the sequence is created. This movie plays correctly. The movie is located at this path:
HD/ Users/ Name/ Movies/ Motion Templates/ Generators/ Generator Title/ Individual Generator/ Gen Movie.mov HD/ Users/ Name/ Movies/ Motion Templates/ Generators/ Generator Title/ Individual Generator/ Gen Movie.mov
NOTE: I also tried exporting the movie, from motion as a stand alone movie. This and the original motion file play the same and are correct
3) Once in FCPX. I can either skim over the generator or place in the time line and let it render
4) The results are the same, the front cover does not turn correctly. As it closes it gets half way, and then the page disappears. A few frames later it flies in from the left side of the screen
5) This did not happen in the original version of FCPX (10.0), but even though I have an original copy on another machine, I cannot import this whole project, as the files are now too new.
Can anyone help with sorting this out. I was going to upload a couple of small videos to show this, but the video upload button is greyed out.
Thanks
G

Hi
I have a problem with exporting a generator from Motion 5 to FCPX 10.0.1.
1) I created a sequence of a page of a book opening then closing. I created this in Motion 5, and exported it as a Generator to its own category and folder
2) I have found that in this folder a movie of the sequence is created. This movie plays correctly. The movie is located at this path:
HD/ Users/ Name/ Movies/ Motion Templates/ Generators/ Generator Title/ Individual Generator/ Gen Movie.mov HD/ Users/ Name/ Movies/ Motion Templates/ Generators/ Generator Title/ Individual Generator/ Gen Movie.mov
NOTE: I also tried exporting the movie, from motion as a stand alone movie. This and the original motion file play the same and are correct
3) Once in FCPX. I can either skim over the generator or place in the time line and let it render
4) The results are the same, the front cover does not turn correctly. As it closes it gets half way, and then the page disappears. A few frames later it flies in from the left side of the screen
5) This did not happen in the original version of FCPX (10.0), but even though I have an original copy on another machine, I cannot import this whole project, as the files are now too new.
Can anyone help with sorting this out. I was going to upload a couple of small videos to show this, but the video upload button is greyed out.
Thanks
G

Photoshop not saving correctly with mcx folder redirection

Students have network homes with their cache folders redirected to local drives as per:
http://houseofmac.wordpress.com/2010/11/03/os-x-network-home-folder-redirection/
Everything has been working fine, but lately several users are not able to save files in photoshop.
Save As takes them to the invisible cache folder in tmp on the local drive.
Photoshop allows them to select the desktop or documents folder as the destination for their saves, but their files are not visible or accessible there.
When I log into the local machine as admin and check their cache folders, the files are not there either.
Client machines are 10.7.5
Server is 10.5.8
Photoshop is CS6
Any ideas?

Correction:
Photoshop's Save As... takes them to tmp in private at the root of the server's startup volume.
This is sporadic, and seems to happen only when there is a "large" group (30!) of clients all logged in at the same time.
Clients are connected to the server via 100 Mbs network.
Server has 2GB SDRAM

Photoshop Menus/Options not displaying correctly

I've just installed photoshop cs6 and many of the options are not displaying correctly. I've included two screenshots as examples.
I'm running Windows 7 64 bit and Nvidia GeForce GT330M graphics. I've updated the graphics driver to the latest version which made no difference.
Any help would be much appreciated as much of the functionality is currently off limits.

Either you have a bad install of Photoshop, or some other app/utility on your system is messing up basic UI drawing (Windowblinds used to do that).

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help me

Please send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya

Photoshop TIFFs with layer masks do not display correctly

I am sure other people must have this problem, but I cannot find any related posts so here goes:
I open an image using the "open in external editor" command (typically a RAW file converted to a TIFF), edit in Photoshop and save the file (as a TIFF, I do not use PSD format)
If the PS edit contains any layer masks or alpha channels (masks in the channel pallet) it does not display correctly when it reappears in Aperture. Only the top most mask will display, assuming I have multiple layer masks in the PS edit.
Not only will the TIFF only appear as the mask in Aperture, but Aperture will print or email the mask, not the PS edited file as it should appear.
It seems that Aperture only recognizes the layer mask (or alpha channel mask) as the image, and all the other layers etc are disregarded.
Is this a confirmed bug, or is there some setting I have not correctly configured or some other issue?
I love Aperture, but this problem is nearly a deal-breaker for my workflow, and would be for any serious photoshop user, I would imagine!
I cannot believe this is still a problem in version 1.5, which is the version I am using (thus my system is 10.4.8)

David,
I assume you mean in the edited PS TIFF file:
In different cases I have either:
A. A TIFF file with layer a layer mask
B. A TIFF file with multiple layer masks
C. A TIFF file with an alpha channel mask
D. A TIFF file with multiple alpha channel masks
E. A TIFF file with any combination of the above
the outcome is the same, they all do not display correctly in Aperture. It does not seem to matter if the file was opened in PS from Aperture via the open with external editor command or if it was worked on outside Aperture entirely then imported. I do have maximize compatibility in PS checked (though I understand this is only for PSD files, though perhaps I am wrong here)
any thoughts?

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now ov

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

Photoshop 3D files don´t appear correctly or not at all in After Effects

Photoshop 3D files don´t appear correctly or not at all in After Effects. What is the problem? OS: win 7

Did you ever find an answer to this. I just found the same problem.
Thanks

"PRC: Generate Asset Lines for a single project" not generating certain asset lines

Hi,
There are certain invoice lines for which the PA_ADDITION_FLAG is Y in AP_INVOICE_DISTRIBUTIONS_ALL.
However, on running the "PRC: Generate Asset Lines for a single project" the same are line amounts are not getting Generated, and are not being shown under Rejected Lines in the output file aswell.
Can someone sugges what might be the issue?

What is your PA Thru n FA Dates?
PA date should be period end and FA date should be month end.........and also check CIP Interface amounts on Capitalization form..
Regards
Ragahvender K

XML Publisher CHARTS: mulit-dimensions not plotted correctly

Hi,
We're currently assessing the suitability of XMP Publisher and one of the deciding factors is to create a bar chart from an SQL query that retrieves multiple portfolios over a time-frame. For example, three portfolios are selected over a time period like 3 years (but there does not have to be a performance for every month) and their performance is plotted against each month (i.e. 0 - 3 Columns depending if a result exists per month). In the desktop publisher we struggled but managed to change the Graphics code until it could dynamically show the correct legend and the data rows, but alas the data points do not correspond correctly with the X-axis. It seems that when the rows are grouped each value is plotted against each column regardless of the tagged value used for the X-axis.
Let me try and put it this way, the first month had only 1 portfolio and the next month had all three, but on the graph the first month shows three columns, the records have slipped.
The code that we used was adapted from a forum entry by Klaus Fabian- "Re: Stacked Bar Chart
" (Servus Klaus;-)), but we need to find out how to adapt the code so that it plots the data correctly against the X-axis values.
Help!!!!
Cheers,
Robin.
Here's the code we used
chart:
<Graph>
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'TODATE'))}" rowCount="{count(xdoxslt:group(.//ROW, 'CODE'))}">
<RowLabels>
<xsl:for-each-group select=".//ROW" group-by="CODE">
<Label><xsl:value-of select="./CODE"/></Label>
</xsl:for-each-group>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//ROW" group-by="TODATE">
<Label><xsl:value-of select="./TODATE"/></Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<xsl:for-each-group select=".//ROW" group-by="CODE">
<RowData>
<xsl:for-each-group select="current-group()" group-by="TODATE">
<Cell><xsl:value-of select="./PERFORMANCE"/></Cell>
</xsl:for-each-group>
</RowData>
</xsl:for-each-group>
</DataValues>
</LocalGridData>
</Graph>

Hi,
I have finally found solution to this issue....
Two setups are required to display the charts in the concurrent program's PDF output:
1. We need to edit the variables CLASSPATH and AF_CLASSPATH. These variables should have the complete path added for the xdoparser.zip file on the server.
2. The DISPLAY variable should be correctly setup to direct the server output.
Also as per my findings so far, the BI (XML) publisher version 11.1.1.3.0 (or any 11g) does not work with EBS (at least for charts). We need to use BI publisher version which is XML 5.6.3 compatible for EBS. This version is 10.1.3.2.1. (patch 12395372) Now this 10g version does not work on Windows 7 so you need to use Windows XP!
With this... finally... your charts should be getting displayed in EBS output...
Cheers!! :-)
Archana

Photoshop Generate Assets is not Dimensioning Correctly

Similar Messages

Maybe you are looking for