Photoshop Imageready cannot read .mov files

This is just one big pain. I got a new computer and had to reinstall everything, after doing so i decided to go make a vid sig,
However now my photoshop imageready does not read/recognise .mov files, i check for about four hours and have been unable to find my answer,
Yes, i have quicktime (7.0 i think)
Yes, i have Divx (also 7 i think)
And as i cannot find a thread around here like this i thought i would post cause this is really ticking me off.
(oh yeah its photoshop 7.0, and i have never had this problem before)
Edit: Also the message that comes up is,
adobe imageready - could not complete this operation because this file is an unknown format

Did you apply the 7.01 updater to it?

Similar Messages

Photoshop CS2 Cannot read PNG files--"Not Enough Memory"

Hi! I have a bit of a problem. I've scoured the interwebs for days but can't find a solution.
My copy of PSCS2 was able to open PNGs in the past, but it just up and decided it doesn't want to anymore. I'm serious--I can't think of any major overhaul or anything I did to cause it, but now it won't read them correctly. It says there's "not enough memory," which doesn't really make sense, when I have a Macbook Pro and nothing running in the background. On top of that, the particular files I've been trying to open are barely 100kb. I've used canvases upwards of ten thousand square pixels in dimension with no problem.
This is with any PNG file. It's not an "incorrect extension" problem, because I made these files and just need to reopen them to edit things.
Here are some screenshots that show what's been happening; nothing exciting, but just in case someone notices something I don't:
That's the picture I want to open.
And that's what pops up.
:/ I'm a little dumbfounded. Halp?

Now, this is strange.
I restarted my computer and now the message has changed--to a simple one, but albeit still confusing.
Sigh.
I didn't do anything but restart my computer.

HT3775 I have a video file that is under quick play .mov and my macbook is telling me that it cannot read the file?

I am trying to record something on my desktop and I recorded it with an application called iscreen recorder lite. I downloaded it off of the application store thinking it would save under a file my computer would recognize. When I tried to play the recording back again, my computer tells me it cannot read the file and I should see if the formatting is right. I checked and the file is under .mov which should be supported by mac. Please help!

I have this exact same problem, only on Snow Leopard. What's the right answer?
Thanks, Mark

Just bought Canon 40d - Use CS2 - Cannot read Raw files in Bridge

Heading says it all really. Just purchased new Canon 40D Body and have been using CS2 on Mac OS 10.4 for over two years. Cannot read RAW files in Photoshop Bridge which is what I have used consistently with 20D files up to now. Quick search on Google brought up fact that Adobe had not up upgraded Bridge to read new 40D files but that was 2 years ago. Am now looking for plug-in! Can anyone help or am I now forced to upgrade my CS2 or move away to Aperture or Lightroom? Any help gratefully received. Rob

The 40d is not supported by any version of Camera Raw that can run in CS2. You need at least CS3 and ACR 4.2 or greater.
Dowload the free, stand-alone Adobe DNG Converter 5.3 and convert the raw files from your 40d to raw DNGs first, then you can open the DNG files in ACR 3.7 hosted by CS2.

I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

Could not complete your request because Photoshop Elements cannot recognize the file extension. (-25600)

im trying to add a water mark to multiple photos but I keep getting Could not complete your request because Photoshop Elements cannot recognize the file extension. (-25600) error. how do I fix this?

If you open up editor then expert mode then you click file and the it's manage multiple or something like that. It will pull up a box asking you where you would like to get the photos from. I picked a folder where I just edited the skin tone and then saved it. I'm thinking it has something to do with the way the files save but I'm not sure how to get it to change. But after the box comes up you can add a water mark to all the photos in the folder. I found the video of how to do it on here.

I cannot play .mov files (from iPhone) in Premiere Elements 10.

I cannot play .mov files (from iPhone) in Premiere Elements 10. Is there a solution?
It used to work fine. I wonder if the problem has something to do with the recent iPhone update. Is there any Premiere update I can download?

Well, if it used to work... and then you updated your iphone and now it does not work... that seems to ME like the iphone update changed something in the files
But, exactly what is inside your mov files?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently suppo

Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "
Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported."
Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
Help Please

As has been suggested above, I would explore Opening the files in another program first, and if successful, just doing a Save_As from that program.
I do not know how sensitive Paint might be, but Ps really wants the JPEG header info to be well-formed. I often encounter JPEG errors in Ps, and my first stop is to IrfanView (free), or ThumbsPlus (commercial), as both seem much more lenient with JPEG's. I have only had a few files, that nothing on my computer would open. I assume that they were just too corrupt.
With either my IrfanView, or ThumbsPlus, when Opened, I do a Save_As, and choose a low compression/high-quality JPEG. If you other program supports Save_As PSD, that would be my # 1 choice, and keep JPEG out of the mix from that point on.
Good luck,
Hunt

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Cannot read image file in oracle 10g forms, getting error frm-47100

I'm unable to read the image from the file location. But If I do re-save via MS-Paint the same image then I'm able to load successfully. I want to load image directly instead of re-save. Error getting like "frm-47100 Cannot read image file".
Need your co-operation to solve this issue.
Thanks in advance!
declare
tiff_image_dir varchar2(80):=('D:\IMAGE\');
photo_filename varchar2(80);
begin
photo_filename:=tiff_image_dir||:IMAGE_NO||'.JPG';
if :image_no is null then
:Image_no :=:UID_NO;
end if;
read_image_file(photo_filename,'JPG','image');
WRITE_IMAGE_FILE('output.tif','TIFF','g_image_info.image',maximize_compression,original_depth)
end;

Hi Sindhu,
By default any operating system file extension starts after the dot. So in this case when it says 2 dots it will think there is something wrong.
RajeshALex

Install Adobe Reader but cannot read PDF file

Hi all,
I am new and not familiar yet with forum so excuse me for a duplicate posting at
http://www.adobeforums.com/webx/.59b65e89/6
which is a thread "cannot install Adobe Reader". Since mine is a different problem, am transferring what I posted there into a new thread, which is as follows:
===============================
I cannot read PDF files with web browser so uninstalled and reinstalled with Adobe Reader 9
I still cannot read PDF file with web browser. After clicking on a link that is a link to a PDF file, I just get a blank page
Why and what can I do?

AOL used to have a lot of problems with PDFs, hope that has not returned. Anyway, the PDF was probably sent as a text file rather than encoded as a binary file. That would make it corrupt and is a problem on the senders end. Older versions of Outlook also had problems with PDFs that would cause a problem on your end.

While signing a .XML file a message "cannot read the file for signing" is displayed. What is the solution.

An official site incometaxindiaefiling.gov.in requires .XML files to be uploaded. When .XML files are uploaded without digital signatures there is no problem. When digital signatures are required for signing the same a message 'CANNOT READ THE FILE FOR SIGNING" is displaced. It happens with CHROME and IE also. The solution which I have devised is that I copy the .XML files in a folder called FAKEPATH in C: drive and pick the file for signing from this folder. The browser allows the file to sign with digital signatures. What is the solution.
Ashish Goel

Ashish,
You might want to submit this feedback at https://incometaxindiaefiling.gov.in/e-Filing/Services/Feedback.html instead.

Photoshop CS4 stopped reading CR2 files. Update failed.

My Photoshop CS4 quit reading CR2 files from my Canon EOS 5D Mark II. Photoshop update with new raw version failed. Please advise.
And many thanks!

This screen shot shows the correct path to the appropriate folder in CS4 on the Mac, which is not called "ACR folder" (that must be a Windows thing).
The version of ACR in the image is older (5.2, obsolete by now), because it's a screen shot from many moons ago.
The important thing is to start the path in the ROOT LEVEL Library, not your username or home Library:

Routine FDPREP cannot read the file APXAECTR.rep

When i tried to generate report from AP, i found this error
Routine FDPREP cannot read the file /d01/oracle/SVIPROD/apps/apps_st/appl/ap/12.0.0/reports/US/APXAECTR.rep.
as i checked the specified directory, the file was not there.
Where to get the file?
Please advise
Thanks

Hi,
Hi there is no APXAECTR.rdf in the directory, how can i download or install this in my server?I believe I have explained this in my previous reply.
If you have a backup or any other identical instance, just restore/copy the file.
If this is the only instance you have, run adadmin and generate the report (select "Generate reports files" option from adadmin).
For details about adadmin, please refer to:
Oracle Applications Maintenance Procedures
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admp.pdf
Thanks,
Hussein

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.
How do I around this problem?

We need to know a lot more if we're going to help you.
What happens when you try? Do you get an error message? If so, exactly what does it say?
What version of Premiere Pro? Have you installed the recent updates? What operating system?
Does this happen for all .mov files or just some? Has this ever worked before? What version of QuickTime do you have installed?
Here's a page written for After Effects, but the information is relevant to Premiere Pro and AME, too:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

Photoshop Imageready cannot read .mov files

Similar Messages

Maybe you are looking for