Photoshop Images in html

I realize of course I'm in the Jurassic era here but I'm poor as dirt so run Photoshop 2.5 and Netscape 7.1 (which writes it's own html)on my mac OS 8.1. My question is this. If I am using a background image in html but the image was created in Photoshop, how do I make my images (say a large fancy font that is placed as a graphic) have a CLEAR background? Any help will be extraordinarily appreciated and may even result in me getting employment. Not great employment but employment all the same. Thanks to all you kind folks who can help in advance.

rubu,
>Any help will be extraordinarily appreciated and may even result in me getting employment.
My first comment doesn't directly answer your question, but it poses a concern. I don't mean to sound as if I'm insensitive to your financial situation...but please understand that being knowledgeable in current software versions, current technologies, workflows, and OSes, and systems interfacing will go a LONG way to getting you work. As you stand, you won't be able to work with many file or document types that are provided to you. Or necessarily be able to create or easily create files in ways that can be readily used. I'm also concerned about the quality of code that Netscape can generate.
To more directly answer your question, I don't think that you can save out Photoshop 2.5 files as .png which would give you transparency. Alternatively I'm not sure if/how clipping paths and layers work with that version. Or if you can save for Web, save as a .gif and designate one color (say, a white background) to be transparent.
What I do recall is that 2.5 was not terribly Web-savvy.
Neil

Similar Messages

Adobe Bridge CS3 not opening Photoshop Image Processor

I selected one, four, and multiple pictures in Bridge to reduce the file size of jpgs. I went to Tools > Photoshop > Image Processor. Nothing happened. Photoshop did not open. That got me to thinking that sometimes while I am in Photoshop Bridge won't open either. Any ideas on resolving issue of "Bridge not opening Photoshop Image Processor" would be greatly appreciated.

Hello Curt Y, Everything is checked in the "Startup Scripts," including Bridge (twice) and Photoshop (twice). Not sure why duplicate entries but there are.
If you mean that you have two of the same versions (both CS3) in there that indicates there is something wrong with your install
If you have any suggestions regarding being able to access the Image Processor to resize pictures and such without first opening Photoshop, I'd greatly appreciate it. If not, the work around will have to suffice.
My first goal would be to reset the preferences for both PS and Bridge and then try again
see also this KB document, section preferences reset:
http://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
And inhere also info on how to retrieve your path for cache to manual delete it.

Putting Media on top of a Photoshop image

I am currently making a website that is Photoshop based. I have created a full page on Photoshop including all my text and images. I used hot spots/ image maps to link users to different pages. But I am unable to do make flash related components in Photoshop. (Example: the image viewer in dream weaver). My question is, how am I able to place an image view onto my webpage in Dreamweaver on TOP of the Photoshop image? I have tried making layers but the problem is that it has a fixed position and it will not be able to adapt to different desktop sizes. I want the image view to be able to move to the center with my website.

I am currently making a website that is Photoshop based.
If you scan through this forum, I'm wagering you'll find that >50% of the posts here are from people who have taken just this approach. Photoshop (and Fireworks) do not write production-quality HTML. The HTML you get from any graphics application is extremely 'brittle' and will break as soon as you begin to change the shape of the content on each page. You should use a graphics application to make your graphics, and an HTML authoring system to write your HTML. That's the honest truth.
I have created a full page on Photoshop including all my text and images. I used hot spots/ image maps to link users to different pages.
Your text content is part of the graphic? You realize that you will not get ranked by search engines when you do that, right? This is the worst thing you can do, really.
My question is, how am I able to place an image view onto my webpage in Dreamweaver on TOP of the Photoshop image?
Now you are getting to the heart of the matter. To tell you how to do this, we will have to use HTML-speak, and CSS-speak, which you are not likely to understand if you are just using Photoshop to write your HTML. The answer to your question is that you make your graphics a background image of the container involved, and place your media into that container, properly nudged into place using padding and margins.
I have tried making layers but the problem is that it has a fixed position and it will not be able to adapt to different desktop sizes. I want the image view to be able to move to the center with my website.
You can do it that way, *and* make the absolutely positioned element center along with the website by wrapping the entire page in a centering, and relatively positioned container, e.g.,
<body>
<div style="width:xxxpx; margin:0 auto;position:relative;">
... the rest of your page's code ...
</div>
</body>

How to embed images in HTML

i was wondering if i could embed images into html and end up with a single file

olafgarten212 wrote:
i was wondering if i could embed images into html and end up with a single file
No you can't. An image file is an image file while HTML file is simply a text file that can be read and edited with any text editor. Image files can't be edited in the normal way without the use of special programs like Photoshop, fireworks, and other free ones that can be downloaded.
However, as your question is vague as pointed out by Nancy O, I would hazard to guess that you want to save a webpage that can be viewed off-line. If this is the case then I suggest use Internet Explorer to save the page as .mht file. This will allow you to have a complete page including images and style sheets all in one file.
The file is saved as: File >> save as >> "myfile.mht"
The saved file is a single web archive, single file that can also be edited in Microsoft Word.
Good luck.

How to properly stretch photoshop image for all browsers

Can somebody please help me determine the best way for my photoshop image to stretch properly for all browsers? I have made the height and width as 100% and it works on some browsers but not on all and looks sloppy.
My template is still in the works from photoshop but can somebody take a look at the following URL
www.wearvindicate.com/indextest2.html and let me know what coding if any needs to be changed?
Thanks
<table id="Table_01" width="100%" height="100%" border="0" cellpadding="0" cellspacing="0">
<td width="100%" height="100%" align="center">
<table width="100%" height="100%" border="0" cellpadding="0" cellspacing="0">

Images are static. They don't resize to fill the browser viewport without special scripts or coding techniques which can create other problems.
The best approach is to use small image slices or tiles and repeat them horizontally, vertically or both with CSS.
More on background images:
http://alt-web.com/Backgrounds.shtml
More on CSS background properties
http://www.w3schools.com/css/css_background.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Lightroom JPEG export VS Photoshop Image Processor

Hey guys:
Long time photoshop and lightroom user (long time user of all things Adobe). First post here in the forums. I did a search for my question but I think it was too specific, so it returned zero results.
My question is about Lightroom's JPEG export vs Photoshops Image Processor. When I export a RAW file to JPEG from Lightroom, the file size is freaking huge. The JPEG is as big as my original RAW file (~25mb). Settings are set to default - 100 quality. Everything else remains untouched.
However, when I use Photoshop's image processor (I launch it through Bridge, easier that way for me) and process the RAW images that way, my JPEGs are roughly 5-10mb in size. Settings in Image Processor are quality 10 and thats it. No actions being run or anything.
Can anyone shed some light as to why Lightroom exports JPEGs that are roughly 2-4 times the size of Photoshop's JPEGs? My initial thoughts are that the 100 quality setting in Lightroom is more like Photoshop's quality 12 (that always makes me think of Spinal Tap - "Why don't you just make ten louder and make ten be the top number and make that a little louder?" "These go to eleven.") Ideally, exporting out of Lightroom would be much easier for my workflow.
Thanks in advance.
-The Doctor

DrMilesBennell wrote:
Can anyone shed some light as to why Lightroom exports JPEGs that are roughly 2-4 times the size of Photoshop's JPEGs? My initial thoughts are that the 100 quality setting in Lightroom is more like Photoshop's quality 12 (that always makes me think of Spinal Tap - "Why don't you just make ten louder and make ten be the top number and make that a little louder?" "These go to eleven.") Ideally, exporting out of Lightroom would be much easier for my workflow.
You are correct: LR Quality 100 = PS Quality 12
Despite LR having 101 Quality settings (0 to 100) it actually only has 12 Quality settings the same as PS 'Baseline Standard':
JPEG Quality Setting Comparison
PS
LR
LR Range
Typical Reduction
0
0
0-7%
11%
1
10
8-15%
23%
2
20
16-23%
14%
3
30
24-30%
14%
4
35
31-38%
16%
5
40
39-46%
24%
6
50
47-53%
4%
7
55
54-61%
27%
8
65
62-69%
25%
9
70
70-76%
31%
10
80
77-84%
35%
11
90
85-92%
41%
12
100
93-100%
I keep a small copy of the above table taped to my monitor. I chose the numbers under the 'LR' column for the 12 steps (not AA's) to make it easier to remember. In actuality ANY number in the LR Range column will produce the same results for each step.
Under the 'Typical Reduction' column notice the small amount of reduction for PS 6 (LR 47-53%) Quality setting. If interested why AND why you probably shouldn't use PS 7 (LR 54-61%) Quality setting see this post:
http://forums.adobe.com/message/5641903#5641903

How to stop the Photoshop Image Processor.

I am using the Photoshop Image Processor in Bridge to shrink a large png sequence. But I started the process with the incorrect parameters. How do I stop the Processor once it has started?

If escape key does not work do not know how to undo. Hopefully you have a backup.

Rotate to fit / photoshop image processor

Anyone know what happened to the Rotate to Fit feature in bridge/tools/photoshop/image processor? I have to make several web photo galleries and this most important feature seems to be missing with CS4.

To clarify - older photoshop (or bridge) programs, you could put in the dimensions you wanted and check a checkbox that said something like "rotate to fit". So if I entered 400x600px, then photoshop would make Portrait images 600 tall x 400 wide, and Landscape image 600 wide by 400 tall.
Photoshop CS4 doesn't have that option so I have to go through all of my images, select all the landscape images, put in 600 wide x 400 tall, and run the script. Then gotta Go Back... select all of the Portrait images.. and run the script again but this time for 600 tall x 400 wide. Such a pain - gotta be a better way just haven't found it yet! help!

File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.

Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast.

Tools Photoshop Image Processor NG (CS5)

From within Bridge CS5, the Image Processor does not bring up the options window.
From within Bridge, if I select some images and then do: Tools > Photoshop > Image Processor...
The next screen does not come up. Nothing happens.... the main menu goes gray, but nothing else happens. No other window pops up.
In CS2 (I know, I'm a late adopter) the what-to-do with the selected images window pops up.
Thanks,
Drew

I am on CS3 and will move to CS5 soon, once the initial frenzy dies. But you say you do this: Tools > Photoshop > Image Processor...
The next screen does not come up. Nothing happens.... the main menu goes gray, but nothing else happens. No other window pops up.
When you click on Image Processor Photoshop should load and then you get the Image Processor Menu. Does it do this and then the Image Processor menu items are gray, so don't you get that far?
Can you load the Image Processor from Photoshop? (file/scripts/image processsor).

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

Photoshop Image Processor.jsx could not be found. CS5

I like to use Bridge to export groups of photos and with past versions I've been able to select photos, go to Tools>Photoshop>Image Process and select one of my custom actions. Now I get this error: Photoshop Image Processor.jsx could not be found.
Any thoughts?
Thanks

By default the image processor script should be placed in the Application
folder (on root level, not in the user
account)/AdobePhotoshop/presets/scripts/ image Processor.jsx
Also by default in Bridge preferences Start up Scripts Adobe Photoshop
should have a checkmark in front of it.
If you changed any of these there lies your fault, if it happened to fail
out of the blue you first should try restart Bridge holding down option key
and choose refresh preferences.
First check if it works now and if it does again set preferences to your
wishes. (obvious not deselecting the PS script... )
Now I get this error: Photoshop Image Processor.jsx could not be found.

Bridge to Photoshop Image Processor won't run

I'm using Photoshop CS3 Extended - V 10.0.1 and Bridge V 2.1.1.9
I'm trying to run some photos through Image Processor via Bridge. After selecting all of the photos, selecting Tools > Photoshop > Image Processor, Photoshop opens, but the Image Processor doesn't run.
I've tried processing other photos in other folders and it works fine. Then I tried processing the problematic folder on a different computer with no luck. There just seems to be an issue with this group of photos.
I check the information on the photos and they're not locked or anything. I'm not sure what else to do. Any ideas?

Try run the Image Processor directly from Photoshop menu File->Scripting. See if you can select the folder and run the processing.
What is the special with that folder? such as size, permission, special name or special file?

Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?

First of all David you are faster responding to email than I am. Thanks.
We tried your scheme with no luck. You are using "ROOT" as your war file
name ROOT, correct? Are you sure the jsp would reference
"/images/MyProject/nppnback.gif"? Why is "MyProject" in there? Where is
the directory "images" defined to Tomcat? Is it a default?
Here's another try at explaining:
In my JSP I have;
<IMG SRC="/images/ef.gif" ALT=People Banner">
My application is in webapps/EformsAppWar
(jsps in EformsAppWar/EformsApp/eforms/*.jsp)
(classes in EformsAppWar/WEB-INF/classes)
so images are in webapps/EformsAppWar/images
and there is, indeed a ef.gif there.
However with no server.xml changes (everything default), Tomcat 3.2
gives a 404 in his log and states in the 404 message that context is
null (CTX < >) and ca't find /images/ef.gif + NULL.
By the way I just noticed that in Tomcat 3.1 I have the images directory
directly under webapps.
----- Original Message -----
From: "David J.L. Martin" <<a href="/group/SunONE-JATO/post?protectID=114166018056146134184102046176231239071179066034">dave@t...</a>>
Date: Wednesday, May 23, 2001 3:35 pm
Subject: Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?
This works:
If the doc root is webapps\ROOT --
Using defaults...jsp's would be put in
webapps\ROOT\MyProjectApp\MyProject\*.jsp
and images would be put in webapps\ROOT\images\*.gif
Then in your jsp...use the following reference:
"/images/MyProject/nppnback.gif">
That will work just using defaults and not playing with any of the
config files...
ie. webapps\ROOT\WEB-INF gets updated as well (with required
classes).
djm
TechPie
916 924-1832 (office)
916 730-4743 (mobile)
916 313-3531 (fax)
<a href="/group/SunONE-JATO/post?protectID=114232044112042209130232046248130100239179057215113109152006048067">dmushrush@e...</a> wrote:
Many of you are running Tomcat 3.2. Can anyone tell me how to get
images to be served by Tomcat. In 3.1 if I referenced /images/image.gif> in my JSP, I could just place the images
directory in the application
(context) directory.
The default docBase is webapp> that webapp> relative addressed as /images/image.gif but such is not the case.
I have put the images directory almost everyplace possible with no luck.
I have explicitly defined docBase in tomcat/conf/server.xml and still no
luck.
I currently have the following in conf/server.xml
<Context path="/EformsAppWar"
docBase="c:/tomcat/webapps/EformsAppWar"
crossContext="true"
debug="0"
reloadable="true" >
</Context>
I place images in that directory structure but still take 404's and in
the log it refers to context as /images ????
I'm probably doing something (or not doing something) foolish. Anybody> have a remedy.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>

First of all David you are faster responding to email than I am. Thanks.
We tried your scheme with no luck. You are using "ROOT" as your war file
name ROOT, correct? Are you sure the jsp would reference
"/images/MyProject/nppnback.gif"? Why is "MyProject" in there? Where is
the directory "images" defined to Tomcat? Is it a default?
Here's another try at explaining:
In my JSP I have;
<IMG SRC="/images/ef.gif" ALT=People Banner">
My application is in webapps/EformsAppWar
(jsps in EformsAppWar/EformsApp/eforms/*.jsp)
(classes in EformsAppWar/WEB-INF/classes)
so images are in webapps/EformsAppWar/images
and there is, indeed a ef.gif there.
However with no server.xml changes (everything default), Tomcat 3.2
gives a 404 in his log and states in the 404 message that context is
null (CTX < >) and ca't find /images/ef.gif + NULL.
By the way I just noticed that in Tomcat 3.1 I have the images directory
directly under webapps.
----- Original Message -----
From: "David J.L. Martin" <<a href="/group/SunONE-JATO/post?protectID=114166018056146134184102046176231239071179066034">dave@t...</a>>
Date: Wednesday, May 23, 2001 3:35 pm
Subject: Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?
This works:
If the doc root is webapps\ROOT --
Using defaults...jsp's would be put in
webapps\ROOT\MyProjectApp\MyProject\*.jsp
and images would be put in webapps\ROOT\images\*.gif
Then in your jsp...use the following reference:
"/images/MyProject/nppnback.gif">
That will work just using defaults and not playing with any of the
config files...
ie. webapps\ROOT\WEB-INF gets updated as well (with required
classes).
djm
TechPie
916 924-1832 (office)
916 730-4743 (mobile)
916 313-3531 (fax)
<a href="/group/SunONE-JATO/post?protectID=114232044112042209130232046248130100239179057215113109152006048067">dmushrush@e...</a> wrote:
Many of you are running Tomcat 3.2. Can anyone tell me how to get
images to be served by Tomcat. In 3.1 if I referenced /images/image.gif> in my JSP, I could just place the images
directory in the application
(context) directory.
The default docBase is webapp> that webapp> relative addressed as /images/image.gif but such is not the case.
I have put the images directory almost everyplace possible with no luck.
I have explicitly defined docBase in tomcat/conf/server.xml and still no
luck.
I currently have the following in conf/server.xml
<Context path="/EformsAppWar"
docBase="c:/tomcat/webapps/EformsAppWar"
crossContext="true"
debug="0"
reloadable="true" >
</Context>
I place images in that directory structure but still take 404's and in
the log it refers to context as /images ????
I'm probably doing something (or not doing something) foolish. Anybody> have a remedy.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>

In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

Nurit,
The point is that that button should not be there, if the preference setting is as you say. This indicates the preference setting is stuck, and that is what I was trying to help you resolve.
The full purge is done as follows:
Quit Mail, and in the Finder open Home/Library and locate the Mail folder. Control-click over the Mail folder, and choose Duplicate -- then drag the resulting copy to the Desktop for temporary backup. Next, open Home/Library/Preferences and find the com.apple.mail.plist file and drag it to the desktop.
Relaunch Mail, which will open as though new, and when prompted to import anything DECLINE. Instead, re-enter your account info, and Mail will re-discover the account folders for your accounts, and all should be well, after setting preferences as you desire.
Ask any needed questions, and keep us posted.
Ernie

Photoshop Images in html

Similar Messages

Maybe you are looking for