Photoshop isn't detecting my Graphics Card
I recently installed a Radeon R7 240 graphics card and am still having problems with CC. Everytime i start it I received the "3d features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system."
I have 2GB of VRAM. Is there any way to force Photoshop to recognize the new graphics card?
Check Help->System Info to see what your video cards and drivers are reporting to applications.
Most likely you just need to update the drivers from your GPU maker's website.
Similar Messages
-
Vista can not detect my graphic card ATI HD2600 on Satellite A210-128
Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue. -
Photoshop CC - force selection of graphics card when dual graphics cards in use
I have Photoshop CC on Win 8 with 2 graphics cards. The inbuilt and the extra card.
This enables me to utilise 4 monitors in my dev environment.
It is not practical to remove a card as I need all 4 monitors.
I have tested disabling each card (one at a time) and Photoshop finds the GPU and works fine.
Q. Is there a FIX to force Photoshop to select a chosen Graphics Card?
Looking around the web, this seems like a large problem.
Regards,
ChrisAs per tech specification of Photoshop CC you must require 512MB of vRAM of graphic driver installed.
Tech Specification Photoshop CC:
http://www.adobe.com/in/products/photoshop/tech-specs.html
Graphics ATI Radeon HD 2600 XT 256 MB
The Graphics card installed on the machine have only 256MB vRAM.
Hereby, Photshop gives you warning to resolve it. -
Photoshop CS6 wont use my graphics card.
When I try to use the Oil Paint filter tool I receive an error claiming that an "uknown graphics processor error" had occured. I then checked under my preferences and Photoshop is not using the correct graphics card. Is there a way for me to fix this problem so that I can use photoshop? I have a switchable radeon graphics card in my computer and use catalyst control center to manage it.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2195 MHz
Built-in memory: 8140 MB
Free memory: 5128 MB
Memory available to Photoshop: 7203 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Mobile Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 2
Video Card: Radeon (TM) HD 6770M
OpenCL Unavailable
Driver Version: 8.830.6.1000
Driver Date: 20110315000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode:
Video Card Caption: Radeon (TM) HD 6770M
Video Card Memory: 2048 MB
Video Rect Texture Size: 4096
Video Card Number: 1
Video Card: Mobile Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.830.6.1000
Driver Date: 20110315000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Mobile Intel(R) HD Graphics
Video Card Memory: 2048 MB
Video Rect Texture Size: 4096
Serial number: 90970550415198354649
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\TJ\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 916.7G, 708.1G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEYour ATI driver is old, and your Intel HD chipset isn't capable.
So that means that OpenCL isn't available.
Try updating the ATI drivers from the ATI website. -
Photoshop not working properly with graphics card.
When I start PS, it has given me messages about making sure I have up to date graphics card drivers, which I do. If I enable Open Gl drawing in Photoshop it won't open some documents or crashes. If I disable open GL drawing, it opens the documents, but obviously isn't giving me the display performance I need. I have been running this setup for about 6 months, but have only started having problems this week. I am running Photoshop CS4 and an nvidia GTX 295.
Don't appear to be having any catastrophic graphics card problems (touch wood), as I can still run Crysis! Can anybody help me please?Thanks for your help guys. It works with open gl using the previous driver. The performance still isn't as good now, but workable. It takes a second to zoom and takes a second to go from looking slightly pixellated to looking smooth. There's also a slight lag on input. Guess I just work with it, till nvidia release another driver that works properly. :/
-
[SOLVED] Z77 Mpower can't detect second graphic card
Hi everyone
I'm experiencing a problem with my Z77 Mpower.
It's not able to detect the second graphic card.
The complete configuration includes:
Z77 Mpower
i5 2500k
2*4Go G.skill 1866MHz
GTX680
8800GT
Crucial M4 256Go
Corsair AX750
The idea was recycling my old 8800GT as a dedicated physx card
Due to massive cooling the GTX680 will be installed on the second port
Both graphic cards works perfectly when installed alone and I also tested with a GTX570 and results are the same
When I install only one card, it works on 1st port at 16x or 2nd port at 8x,
but if there is 2 cards installed only the first works and bus-width is 8x according to CPU-Z, the second one is invisible in windows, GPU-Z or driver
I didn't tested the 3rd port because my sandy bridge has limited pcie lane
I tested it with bios 17.4 and beta H53, results are the same, I also tried with and without 6 pins power supply on the mainboard and the problem is still the same.
I tried this graphic cards configuration on a gigabyte z68 ud4 and same cpu, ram, vga and psu and it works perfectly.
Is there a bios setting to enable multi gpu ? (tried to enable igp multi screen without result)
Is it possible to have defective pcie port for multi gpu when all pcie ports works alone ?
I have another question about this motherboard
is it possible to have a dynamic vcore related to eist while overclocking ?
on the gigabyte z68 ud4 it's possible by setting vcore on normal and playing with load line calibration and offset
on the mpower this settings appears in bios but are not graduated the same way and I don't understand how they works.
Thanks for your helpThanks for your help flobelix
I already tried and benched this physx configuration on my old gigabyte motherboard
in non physx games the 8x limitation barely don't affect the gtx680
in physx games the 8800gt isn't fully loaded and framerate is near the gtx680 alone with physx disabled.
this configuration gives physx graphical bonus without affecting framerate
the 120W limit of the MK13 may be for fanless use, I have 2 90mm fans attached directly on the heatsink and under furmark the card runs 20°C lower than stock cooling and is very silent
I also kept the stock molded metal plate that cool the power supply and ram under the MK13
But due to this cooling this card can't be installed on the first slot
on the gigabyte until you set the dedicated physx card in the driver both cards and all outputs on cards sends the same signal to screen (bios screen is also sent to all cards)
on my mpower only the first sends signal to screen, but i should be able to set (only for testing purpose) the 8800gt as main device and the gts680 as physx card
unfortunately it don't work because it looks like when a card is plugged on 1st port the mainboard disables the 2nd -
Does Mac Pro auto-detect USB graphics card?
Hi
I have Mac Pro with a half dead motherboard. For whatever reason it can't recognize graphic cards. I've tried switching around with other similar graphic cards from other working Mac Pro's with the same specs (early 2008).
If I plug in a USB graphics card, does that start working immediately or does it need to be installed before anything happens?
I realize this Mac Pro is probably going to die on me any day now. But the USB cards are cheap (since work is paying), I can utilize it until it dies, even with weak graphic power.
Thanks.I doubted there was anything to be done about the internal graphics, that's why I neglected to give other details.
I just realized it was an older Mac Pro than I originally thought.
It's this one with 2x3.0GHz Xeon processors (A1186) (EMC 2113)
http://support.apple.com/kb/SP30
We run Lion on all our machines.
It used to be spending it's days as a Metadata controller for an XSAN 2.0. But we've upgraded to Lion Server, on two Mac Mini's. So it's out of a job until I can get it to give me an image on a screen.
So the card it's not seeing is a NVIDIA GeForce 7300 GT 256MB (probably died).
I tested these
NVIDIA GeForce 6600
NVIDIA GeForce 210 512 MB
NVIDIA GeForce 8800 GT
But none of these appear to be on the list of compatibles for my Mac.
I just need it to work for cheap right now. Buying a internal graphics card is to expensive because it's basically going to be an oversized and overpowered harddrive (maybe subjected to some SMB share experimentations).
Right now I can't even get it on our network because I can't see the MAC Addresses
So no remote controlling either... -
Photoshop CS6 trigger to Upgrade Graphics Card?
Photoshop CS6 beta release "the first version to integrate the company's GPU-accelerating Mercury Graphics Engine (MGE)". Does this mean that I could expect speed benefits in Photoshop if I upgrade the NVIDIA 8800GT card in my early 2008 Mac Pro?
I have been wondering about whether I should upgrade my 8800GT for a while (my box is fine: new PSU, plenty of RAM) and thought if Photoshop will benefit that might be my prompt to act.I have read from couple people at different times that 1GB VRAM is not enough and the "special" MVC 2.5GB GTX's have lots of... punch.
The 5770s is okay standard Mac Pro offering - two yrs ago = some had noisey fans but there have been 3 revisions since probably and they are and should be quiet.
Quiet and high performance do not always go togehter. One of the downfalls of the 8800GT is... they fail, and they don't have the best fan and cooling, they aren't dual-slot width in desgin. There are copper coolers but I wouldn't - it has just 512MB unless you got a custom flashed version.
OpenCL has improved but hard to develop, it needs too much work to optimize the code for one thing. And new compilers - great but will they get used to develop CUDA+OpenCL code?
Hope the Nvidia GTX 670 becvomes a real offering. At $399 it is actually in the same cost as a 5870 was.
A Quadro 4000 or whatever comes after it with 2GB is or should be considered as well. Yes?
64-bit kernel mode and 24GB RAM or more. 16GB and not using 64-bit mode may help from where you are of course, but might want to have more to get the most out of your system.
Check www.macperformanceguide.com for ideas lately? -
Problems with the graphic card and adobe photoshop cs5
hello,
i installed adobe photoshop cs5 for my sisters computer:
specifications:
Prozessor: AMD Phenom™ II X6 1090T Six-Core Prozessor(3,2GHz, 9MB Cache)
Festplatte: 2x 1 TB SATA II
Arbeitsspeicher: 8 GB DDR3
Grafikkarten: VGA PCI-Express ATI Radeon™ HD5870 1GB GDDR5 (2x DVI, HDMI, DisplayPort) x 2 (2 von der sorte)
Sound: 7.1 support
Netzwerk: Gbit LAN
Software: Windows® 7 Home Premium,
Schnittstellen/Anschlüsse: Gehäuse-Front: Mic., Audio, 2xUSB 2.0, Front MCR, 1x Firewire, 1x eSATA Gehäuse-Rückseite: 8x USB 2.0, 2x USB3.0, 2x
Firewire, 2x eSATA, 2x DVI, 1x HDMI, 1x Gbit LAN, 2x SPDIF, 6x Audio
Besonderheiten: 80 Watt Netzteil
as you can see, absolute new hardware...
now photoshop tells her that her graphic card wouldnt fit the requirements, and allways switches to "software-sides" rendering.
this can't be true, this mashine is running hardchore grafic apps, and has the newest ATI Raedon Gra-Card (2 of them) which even now has a native support for open GL.
the computer has all latest drivers (no newer versions available)
so what to do?
i can't even tell photoshop manually in the settings to enable open GL...
i defenitally reached the end of my knowledge here.. i tried everything, also changing (as suggested by photoshop) the open GL settings of the graphic card card. no changes ...
need help with this one..
thank you already for your time and hopefully help
chris congrejoThis forum is for suite specific issues only. Please post in the Photoshop forum.
Bob -
Photoshop cs5 with 128 graphic card
Hi
I am thinking of getting Photoshop cs5, but the minimum graphic card spec is 256mb or something like that. I only have 128mb. I think this is the only thing that does not match up to Photoshop. It says something about open GL but not sure what this is and if I have it. I think the mac is about two and a half years old the first silver iMac. Is it ok to use the iMac with cs5 even though the graphics is not good enough? Will it do any harm to the computer or will it just be a bit slow? Is the graphic spec so high because of the 3d options photoshop has and if I used it mainly for photography rather than graphics will it would be ok to use Photoshop? Thanks for any helpIf your computer doesn't meet the minimum specifications then at best the performance would be horrible and may not run CS5 at all. Your 3.5 year old iMac probably should be upgraded to a new iMac. Assuming your computer is still in pretty good shape you could sell it (Macs have good resale value) and use the money towards a new machine. Another avenue to look at is Apple's refurbished iMacs, these are a great value and come with the same warranty as a new machine and are eligible for AppleCare. The inventory changes very quickly sometimes several times a day so if you are interested visit: http://store.apple.com/us/browse/home/specialdeals/mac?mco=OTY2ODY3Nw
Roger -
MSI H55M-E32 will not detect Graphics card
HI,
I just bought a new cpu, i am using the intel intergrated graphics (on-board) at the moment. I tried installing radeon 9600 pro graphics card but the mobo does not detect it. Monitor is black screen, no boot up. btw the fan on radeon 9600pro is not spinning.
I tried using another graphics card that i have. A creative gf4 Ti4200. no boot up on monitor as well. fan not spinning.
How to get the motherboard to detect the graphics card...??? my computer does not detect any graphic cards..
I like to get radeon 9600pro working ...How to do it?
My comp:
Motherboard - MSI H55M-E32
cpu - Intel i3 540
mem - kingston 2gb ddr3 pc1333
psu - Vios 450w psu
os - win xp sp3
vid - Ati radeon 9600pro , creative gf4 Ti4200
Thanks.
and the other one is an ancient agpx 4 card as well
YOU DO NOT HAVE AN AGP SLOT TO PUT THEM IN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
Photoshop CC not detect nVidia GeForce GTX 680 after driver upgrade (Windows 8 64-bit)
i just upgraded the driver for my nVidia GeForce 680 graphics card from the nVidia website. the specifications are shown below. Photoshop CC now says that it can't detect my graphics card. does anyone know the solution to this problem?
nVidia verstion 327.23 WHQL
release date: Sept 9, 2013
operating system: windows 8 64-bit
will adobe have to issue an update to photoshop CC to fix the problem?hey chris,
thx for relplying. i appreciat it. here is what happened. i did an update through microsoft and downloaded a driver for nVidia. somehow that download caused PS CC to stop recognizing my GTX 680. i'm not sure why. subsequent to that, i went to nVidia's website and downloaded the current driver. i still found that PS CC didn't "see" my graphics card. that is when i wrote this post. after i posted this i rebooted my computer and found that everything now works fine. PS CC now recognizes my GeForce GTX 680 with no problems.
john -
AMD Radeon Graphics Card Not Found! Please Help HP Envy M6...
When I head into device manager, it shows that I have only an Inter (R) HD Graphics 4000 graphics card even though the laptop is said to have an AMD Radeon built in... I've upgraded my version of Windows but it doesn't make sense, why does this driver go away? I've reinstalled every driver there is for the AMD series... I can't get my laptop to detect the graphics card, has anyone had this problem? I've seen this on threads too but the answers weren't helpful at all because they just redirected the user with a link to another thread which isn't relating to a graphics card. Is there any way I can fix this so my laptop can detect my graphics card?
Note: When I run AMD's 'automatic driver checker', it CANT EVEN DETECT IT ... Please help me, there's just one too many problems with this laptop aside from the fact that it overheats like crazy.
Thank you,
Shehryar.This is the picture that I've taken, you can see that the Intel HD Graphics 4000 is indeed there however, I found an unknown device at the bottom. There is NO information of this device, here is the 'info' for the unknown device:
Device type : Other
Manufacturer : Unknown
Location : On PCI Express Root ComplexUpdate driver will not work. I'll look for more but that's really it... Thanks Shovon_Khan! -
Graphic card problems - AMD Fire Pro M5100 in AutoCAD and Intel 4600 in Windows applications
Hello,
I have some serious problems with graphic cards in my laptop. All newest drivers are downloaded and installed from HP site.
First problem is related to rendering some applications. Some GUI elements have horizontal stripes. This can be observed also in HP Support Assistant app. The problem is visible in screenshot. If I disable hybrid mode in BIOS, then the problem disappears.
The second problem is related to AutoCAD 2015. Some of the GUI elements are not rendered correctly. But that does not bother me that much, a bigger problem is related to hardware acceleration. AutoCAD successfully detect my graphic card (AMD Fire Pro M5100), but when I switch on the hardware acceleration mode everything starts to work very slowly. It is impossible to work with some larger documents. If I disable hardware acceleration, everything works very smoothly.
I do not believe that this graphic card does not have the power to work with basic CAD drawing. On AutoCAD forum I received information that this is probably related to bad drivers.
Can anybody help me? This laptop has been recommended to me for CAD work and I am a bit dissapointed. But I am sure that this can be fixed.
AMD drivers: 14.301.1003.1003-141203a-178403C-HP
Intel drivers: 10.18.10.3871 (I have also tried the newest ones, 10.18.10.3995 - no difference)From this link, some people have found success by downgrading their graphics driver to an previous version. Looks like there are a few peole experiencing issues with AutoDesk products and this card - you might also try to contact AutoDesk directly and ask if they have a certified driver for your card.
Incidentally, I have the same card, though I am experiencing a different problem. I swapped in a dell version of the card into my HP machine, but now realize that I need the HP VBIOS instead of the Dell to get it to run.
If my answer helped you and you have a spare minute or two, I would be very grateful if you'd share a copy of your (hp-specific) VBIOS from your card?
If so, download GPU-Z, start it and hit, "Save to file..." to save the .rom for your card. Attach file to resonse to share.
Best of luck in sorting out the performance issues. I suspect it may have something to do with the fact that Autodesk uses DirectX more where Firepro's emphasize Opengl performance. Hopefully one of these driver fixes will make a difference. -
MSI GS70 GTX 765 graphics card issue
I've been using the laptop for close to 8 months and had no problems with it until I felt the need to plug it to an external monitor via a mini dp to DVi cable. It worked perfectly for a few days. I watched a few seasons of house of cards on it and one day, all of a sudden the external monitor is blank and from here on it doesnt work when connected to an external monitor. i tried the hdmi port instead, i tried the other mini DP port. I also tried a lot of different things like updating the nvidia grpahics, updating the intel graphics, I uninstalled and reinstalled all the drivers, finally after doing all of this and getting no results, i restored the laptop to its factory settings, thinking that this must be a problem that windows 8.1 caused. Even after getting it back to windows 8, its still the same. in the device manager, under display adapter, right next to the nvidia geforce gtx 765m, there's a hazard sign. So that means it detects the graphics card, but unfortunately it doesn't seem to be working. I tried installing a varied bunch of nvidia drivers too, if that means anything . Can anyone point me in the right direction?
I've posted results I got from GPU-Z. The clock rates of the GPU seem to be at zero. I'm glad that it is getting detected, but there's still the hazard sign in the device manager. What gives? :/1. Make sure the mini-DP to DVI cable is not damaged first. Borrow another laptop or machine to try the cable to make sure it's okay.
2. Remove all NVIDIA drivers and install the NVIDIA driver from here: http://www.msi.com/support/nb/GS70-STEALTH.html#down-driver
Select your OS to download. Remember to check "Perform a clean installation" while running NVIDIA driver installer.
3. Press Fn+F2 to manually switch on the video output (MSI shortcut key function).
4. Press Windows+P to manually switch on the video output (Windows function).
5. If none of the above worked, update your BIOS & EC & remove all power sources of the laptop & poke the reset hole on the right side. Then power on again.
6. Try step 3 & 4 again.
4. If still none of the above worked, I'm afraid you may need to send it to local authorized service point to find & fix the problem.
Maybe you are looking for
-
Nokia 1320 - Need Support - Nokia Down - Brazil
Hello Guys, Vim expose all my disappointments with Nokia product as professional in the field of Information Technology, came to recommending compared to other Nokia phones believe that Mark is doing an excellent job, but the brand disappoint me as m
-
Write data to text file on command using trigger
Hi there I'm kinda new to using Labview, and i seek some advices. I've got this program, which is used to read from a usb-device (6215). It measures the voltage at an input channel on the usb-device, and processes it, and finally writes the data to
-
I have the following Select Statement: SELECT FGBTRND_SUBMISSION_NUMBER, FGBTRND_TRANS_AMT, FGBTRND_COAS_CODE, FGBTRND_FUND_CODE, FGBTRND_ORGN_CODE, FGBTRND_ACCT_CODE, FGBTRND_PROG_CODE, FGBTRND_ACTV_CODE, FGBTRND_LOCN_CODE, FGBTRND_RUCL_CODE FROM FG
-
Build distribution error - WINNT.H
When I go to build a distribution for my project I get an error for WINNT.H. It says: cviincludes.h - 20 errors "WINNT.H"[523,10) syntax error; found 'indentifier' expecting ','. In the WINNT.h it highlights a line __inline U
-
I want to upgrade from 10.6.8 to Mavericks but my internet connection will take many, many hours to download. Do I have another option?