Photoshop layer function not working

Hi,
I am using the trial version and i wanted to ask is it fully functional? Or are functions like creating a new layer or image adjustments disabled??
I would really appreciate an answer and/or some troubleshooting
Thanks

Moving the discussion in Photoshop forum

Similar Messages

3D in photoshop cc does not work, the program will be cut off automatically

3D in photoshop cc does not work, the program will be cut off automatically.What can I do?

my problem is as follows.If I want to make a 3d creation in photoshop, then
asked me to cc in clicking function 3D, after new JUST by layer and then
JUST PRESET and then sphere. Then opens a new window where in it says: you
are about to make a 3d layer.Do you want to switch on the 3d workspace? I
choose YES Then I get to see a new window stating that the program no
longer work properly and quits. Am I doing something wrong or is my pc not
suitable? data from my laptop are: processor a4-5000 AMD APU with radion
(tm) HD graphics 64-bit operating system, hr 4.00 1.50 Gb x64processor
honor!
mijn probleem is als volgt.Als ik een 3d creatie wil maken in photoshop cc,
dan wordt mij gevraagt om in functie 3D aan te klikken, daarna NIEUW NET
VAN LAAG en dan VOORINSTELLING VOOR NET en dan BOL.
Dan opend zich een nieuw venster waar in staat:u staat op het punt een 3d
laag te maken.Wilt u overschakelen op de 3d werkruimte?
Ik kies dan voor JA
Vervolgens krijg ik een nieuw venster te zien waarin staat dat het
programma niet goed meer werkt en wordt afgesloten.
Doe ik iets verkeerd of is mijn pc niet geschikt?
gegevens van mijn laptop zijn :
processor AMD a4-5000 APU with radion(tm) HD graphics 1.50 hr
4.00 Gb
64 bits besturingsysteem, x64processor
2014-12-18 10:14 GMT+01:00 c.pfaffenbichler <[email protected]>:
3D in photoshop cc does not work, the program will be cut off
automatically created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7025920#7025920>

My 3D in Photoshop CC will not work

I do not know what a video card is and I am running 3027 MB on Photoshop CC, also I have it enabled? Help me please!?

my problem is as follows.If I want to make a 3d creation in photoshop, then
asked me to cc in clicking function 3D, after new JUST by layer and then
JUST PRESET and then sphere. Then opens a new window where in it says: you
are about to make a 3d layer.Do you want to switch on the 3d workspace? I
choose YES Then I get to see a new window stating that the program no
longer work properly and quits. Am I doing something wrong or is my pc not
suitable? data from my laptop are: processor a4-5000 AMD APU with radion
(tm) HD graphics 64-bit operating system, hr 4.00 1.50 Gb x64processor
honor!
mijn probleem is als volgt.Als ik een 3d creatie wil maken in photoshop cc,
dan wordt mij gevraagt om in functie 3D aan te klikken, daarna NIEUW NET
VAN LAAG en dan VOORINSTELLING VOOR NET en dan BOL.
Dan opend zich een nieuw venster waar in staat:u staat op het punt een 3d
laag te maken.Wilt u overschakelen op de 3d werkruimte?
Ik kies dan voor JA
Vervolgens krijg ik een nieuw venster te zien waarin staat dat het
programma niet goed meer werkt en wordt afgesloten.
Doe ik iets verkeerd of is mijn pc niet geschikt?
gegevens van mijn laptop zijn :
processor AMD a4-5000 APU with radion(tm) HD graphics 1.50 hr
4.00 Gb
64 bits besturingsysteem, x64processor
2014-12-18 10:14 GMT+01:00 c.pfaffenbichler <[email protected]>:
3D in photoshop cc does not work, the program will be cut off
automatically created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7025920#7025920>

Why is my adobe photoshop elements 12 not working. it says initializing and then it says there is an error and closes itself

why is my adobe photoshop elements 12 not working. it says initializing then error and shuts itself down.

Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

In photoshop cc is not working properly right button on the tablet stylus genius

in photoshop cc is not working properly right button on the tablet stylus, when clicked, the menu appears and immediately disappears in Pshotosho CS6 everything was OK, and in other programs all OK.
Tablet - Genius G-Pen M712X.

have you participated on here before, smihop? -- do Adobe representatives ever provide a solution? I pay monthly for all adobe cloud applications <-- doesn't it seem like that should come w/some kind of support? (especially when they push out buggy releases <-- which make me wish I could go back a version)

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

hi guys,
My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
My OS is windows 7
RAM - 8gb
HDD - 1 TB

are you getting any errors?
and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

Photoshop 7 DOES NOT WORK with Leopard ( OS 10.5 )

If you are not prepared to upgrade your Photoshop 7, DO NOT UPGRADE TO LEOPARD.
Photoshop 7 and OS 10.5.x (Leopard) are not compatible. When Adobe released Photoshop 7 in 2001 as a Universal Binary for OS9 and OSX they had no idea that Apple would be switching to an Intel chip in 2006. As the release of Leopard is also the end of the Classic environment, this may be the reason Photoshop 7 does not work in Leopard.
As of the release of CS4, Photoshop 7 can no longer be used as a path to upgrade Photoshop. A full version has to be bought now. But Photoshop CS or later can still be used as an upgrade to Photoshop CS4.
It is recommended that Photoshop 7 owners still looking to save money on upgrades stay away from eBay, as, unfortunately, much of the software listed is pirated or misrepresented and you will still not be able to upgrade to CS4.
[topic updated by Forum Host]

There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

Adobe Photoshop CS5 is not working with Lion.

Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg

Why while in Bridge Load Files into photoshop Layers does not work?

In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work. I have two images selected and when I execute that comman in Bridge nothing happens. I exited and restarted both PS and Bridge and still nothing. I am working in Windows 7 and Photoshop cs6.

No I tried File/scripts/load file into stack and still did not work.
There was an update to bridge and now it works. Thanks so much.

HT204210 Updated to Yosemite 10.10.2 and now my Photoshop CS5 is not working. What can iI do?

Updated to Yosemite 10.10.2 and now my Photoshop CS5 is not working. What can iI do?

Install the After Effects CS6 (11.0.4) update:
http://adobe.ly/DVA_updates

Copy/paste function not working in Firefox 22. Always good in previous versions

Copy/paste function not working in Firefox 22. Always good in previous versions editions

Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P.

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Photoshop layer function not working

Similar Messages

Maybe you are looking for