Photoshop layered image doesn't work properly in DVDSP

Well, hi. I'm new here, and something new in all FCP family. Well. I tried my first DVD and made a menu image in Photoshop with 2 layers (buttons). I imported in DVDSP, and created the buttom. For any strange reason, the layer image in photoshop is different from the image the buttom was created. Does anybody knows what have I done wrong? Files can bee seen and downloaded at
http://www.4shared.com/dir/1817484/3e33549e/sharing.html password (if any) "salsa"
There are: menudvd.psd = 1.2MB and dvdandre (zipped folder) = 23KB [workflow in DVDSP]
SHORT:
Image from the two guys in photoshop has borders (one layer with blue and other with red border). After imported in DVDSP, these borders disappeared, and the hair color made the difference when clicking the buttom.
Well, thanks for all, sorry the "little confused english" I hope it was possible to understand.
regards

Walter
Saludos desde Buenos Aires!
As Steve told you DVDSP don't read Photoshop effects in layers. You need to rasterize those layers. The best workflow is work with a "source" file (to make any further changes), with all your effects and with a "final" file flattened file to use in DVDSP.
Besides that you must create a separate file as Overlay. That file must be white background with your overlay shape in plain black (with a little more of practice you'll learn to use different tone of gray to get different colors iun your overlay, but 99% of my DVDs have just black and white overlays). You can/must use the background design as starting point.
Finally because you are authoring a NTSC DVD you must take care of the pixel aspect ratio issue. What means that? Your "source" Photoshop background file must be 720x538 pixels. Before importing in DVDSP you must resize it to 720x480. This info is from DVDSP User Manual:
Hope that helps !
  Alberto

Similar Messages

  • Photoshop cs6 CC doesn't work properly

    Hi Adobe ,
    I just join the creative cloud and after installing adobe Photoshop CS6 CC i discovered a few problem during designing. After a while my shortkey such as cmd+J and cmd+G don't work anymore, I have to restart Photoshop all over again and then it works properly and within a few minutes the shortkey are out again. What is the problem? Can you help out.
    I'm using a Apple iMac 21,5 inch with OS X 10.8.2.
    Hope you can help me because this is quite anoying!
    Groetjes,
    Robbie

    Not a CC user myself yet (what a regrettable developement Adobe’s switch to CC is).
    But I suppose the old stand-byes probably still apply:
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

  • Photoshop CS5 doesn't work properly after opening too many images

    Hi
    This is my very first post.
    I'm also new to CS5. I do hundreds of photo touching/cropping that is a part of my job for web.
    Everything is running fine but when ever I open too many images in Photoshop CS5 it doesn't work, I mean it doesn't hang or freezes it just open all files and then doesn't show any images (just blank) and when I closes 20/30 or more images then it get fine.
    I thought it might a RAM problem but i have i3 processor with 4GB of RAM. I have also increased memory usage from 60% to 80% but I'm still facing the same problem.
    Would like to tell that in the previous version of CS3 I never got this problem and worked fine.
    thanks
    --Venkat

    Disabling OpenGL entirely is draconian.
    You could try, if it's not already set that way, going into the Advanced settings and switching OpenGL to "Basic" mode, which uses fewer resources.
    -Noel

  • Selecting with colour range doesn't work properly

    Well, at least to me it doesn't work properly.  If I have elements on seperate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected.  That's not what I want!  I only want it to select the colour range on that one level.  The work around is to manually turn off other levels, but on a  file with lots of levels, that can be tedious.  Can this be avoided?  Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).

    Aha! You are correct. Layers above the target layer are still being sampled when sampling is at "Current Layer".
    That has to be a bug. The Eye Dropper Tool itself does work correctly, though.
    I'm about to report another problem, so I'll report this one, too.
    Edit: Looking again, I don't think there is a bug.
    It seems to not be that the higher layer is seen when sampling "Current Layer", which is correct and the same as when the Eye Dropper Tool itself is use. However, the pixels of the visible composite are then evaluated to determine the regions to be selected. I guess that's correct behaviour and you will have to do the Alt-click on eye trick to completely ignore all other layers.

  • Edit in Photoshop from Lightroom doesn't work; Automate Photomerge doesn't work

    Edit in Photoshop from Lightroom doesn't work.
    It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
    Likewise,  I also can't automate>Photomerge ...  I pick all the images for the PHotomerge and hit "okay," but nothing happens.   Makes me think it's  Photoshop, not Lightroom, that is all wacky.
    I'm on a Mac, using OS X Yosemite, 10.10.1  Lightroom is version 5.7  Photoshop is CS5, version 12.0.4
    I uninstalled Photoshop CS5 and reinstalled. No change.  I also tried dumping PS preferences, but that didn't affect a thing, either.

    None of my "Edit In" worked with the pictures in Lightroom for a particular folder. I expanded the 2014 folder and found that two subfolders had a "?" in front of the 2014-07-04" and another. In other words, the folder was missing. After I found the missing folders using the Lightroom "Find Missing Folder" option, I was able to use the "Edit In" menu item. The 2014 folders weren't expanded at first, so I didn't see the ? marks in front of them. With the missing folders, Lightroom's "Edit In" option was basically telling me there was no picture to "Edit In." Howerver, I have Previews and Smart Previews made when I import picture files into Lightroom. So, the "pictures" showed in the slide strip on the bottom, and also in the display in "expand," but it was actually only showing the previews I had built, not the actual missing pictures in the missing folders. I had accidentally moved some directories using Windows Explorer, and I didn't realize my "happy fingers" moved them outside of Lightroom. Of course, Lightroom has no way of knowing I moved them, and just shows the "?" before the missing folder name. After expanding the root folder, then knew what to do. Fixed it easily. It was frustrating, and took about 20 minutes to see the problem. And that fixed the greyed-out "Edit In" Photoshop CC 2014, and all the other plug-ins were greyed out too.
    Hope this fixes your problem.
    Mike

  • Trouble with the PS CC2014 3D Effects - Intel HD Graphics 3000 that doesn't work properly?

    I Have a MBP 13 inch 2.8 GHz Intel Core i7 late 2011 and I'm Having trouble with the PS CC2014 3D Effects crashing when trying to apply a New 3D extrusion, are there any solution regarding the Intel HD Graphics 3000 that doesn't work properly?
    Thanks!

    Look at this document. It should help you troubleshoot and it suggests settings to try out.
    Photoshop CC and CC 2014 GPU FAQ
    While the stock advice for Windows users is to go to the Intel site for updates, Mac users can only get their drivers in the Mac OSX system updates. So you need to be sure your OS is up to date. If you have an earlier version, like 10.7 or 10.8, it is possible an upgrade to 10.9 might help.

  • Google News doesn't work properly with Safari 5.1.4

    Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

    Thank you for your response.  The more I use 5.1.4 the more problems I am seeing.  There are problems with images and layout.  I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

  • Dreamweaver 8  doesn t work properly on imac intel "17"

    Hello guys need some help, I m new to mac and I´ve installed dreamweaver 8 but it doesn t work properly. Instead of the insert toolbar I get boxes with a '?' plus in some occasion when I want to save a work instead of the usual " save or ok or discard" the button appears as " undefined". Can anyone help please?
    Here is a picture of the error I get. Regards
    http://flickr.com/photos/37586542@N00/
    imac 17 intel duo   Mac OS X (10.4.6)  

    It would appear to me when you installed Dreamweaver,
    some image files got misplaced or lost by mistake.
    Did you ever go and search for images and start
    erasing images you didn't know what they came from?
    If you did, then those may be the image. Those
    images are little modular pieces that Dreamweaver
    uses to display information on the screen.
    I would install Dreamweaver from scratch and make
    sure it is in the Applications folder.
    Hi, did everything posible, I even downloaded a evaluation version, just in case but it seems it s only me who has this problem, I problaby need to download somekind of firmware or java but don t know which. Cheers

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • My Safari doesn't work properly after installing Lion.  Don't like it, how can I uninstall? (Cloud not worth it)?

    I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac.  My Safari doesn't work properly anymore.  Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall?  Thanks,

    Wipe the drive clean and install Snow Leopard from your install disk.
    Might be less work fixing Safari. Try Resetting Safari.

  • I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

    I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
    Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

    Hey, There are afew things you can try.
    - Simply turn your phone off and back on again
    - Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
    - Back up your iPhone to your PC, then restore it..
    this ones last cause I think you may have tried it already..
    - Close all open applications
    Hope this helps!
       Kieran.

  • HT1923 The sync function on my iPod Touch 3rd generation doesn't work properly.  My OS is up to date, but some of my podcasts won't transfer onto the iPod, and it won't delete ones I've already listened to.

    The sync function on my 3rd gen iPod Touch doesn't work properly.  It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • What can I do if my CD or DVD drive doesn't work properly in Windows 8?

    QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
    AnswerNote: For help with this issue in Windows 7, please see this article.
    To get your CD or DVD drive working correctly, try these suggestions in the order listed.
    Reinstall the Driver
    Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
    Power Cycle
    Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
    Ensure the laptop is turned off.
    Unplug the laptop's AC power cable.
    Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
    Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
    Hold down the power button for thirty seconds.
    Reattach the battery if removed.
    Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
    Connect the other end of the AC adaptor to your computer.
    Start the computer and test the drive
    Microsoft Fix-it
    Your computer may exhibit one or more of the following symptoms:
    Your CD or DVD drive no longer appears in Windows
    Your CD or DVD drive does not read or write and is shown as disabled
    The media in your CD or DVD drive cannot be read
    The media cannot be written to a CD or DVD inserted into the drive
    You receive an error message about your CD or DVD drive
    If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
    System Restore
    Try using System Restore to restore to the most restore point from before the problem arose.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    System Recovery
    If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
    For more information on performing a recovery, see the following article:
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    Contact Customer Support
    If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

    See this Microsoft article - http://support.microsoft.com/kb/314060/en-us  For ways to fix manually
    and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
    (these are from the Microsoft article)
    Resolution 2: Use the CD/DVD Fix it troubleshooter
    To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8   
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    Windows 7, Windows Vista and Windows XP
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    If your problem is not solved, try the next
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • Hp laserjet P1006 doesn't work properly

    my Hp laserjet P1006 doesn't work properly on my windows 7(64-bit) and whenever I try to print a page the orange light just flashes and then the green light flashes and then it doesn't print at all.I've tryed everyway including reinstalling the software or even turning it off and then turning it on.Pleaseeeee.............help!!!!!!!!!!!

    Hello
    I understand you are no longer able to print with the P1006 on Win8.1.
    Did you uninstall the P1006 first?
    If not uninstall and reinstall the printer software again.
    Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for