Photoshop loading photo files very slow (not printer)
For the past several weeks Photoshop C3 has been loading even the smallest of photo files very, very slowly -- about 10-15 seconds for one.
I read an earlier post to this affect, that said it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
Anyone else experiencing this trend and/or have any solutions.
rfrank
WSU Today
http://www.wsutoday.wsu.edu
John:
Thanks for the effort, but alas it didnt make any difference.
Our IT support crew tried a variety of generic drivers in the default mode, but a 56k photo still took 15 seconds to load.
However, I still had a version of "Photoshop CS" on my machine. So, out of curiosity I fired up CS and grabbed the same test photos, and bam the photo popped right up. So it is definitely a CS3 issue
Any other solutions that you know of?
rfrank
WSU Today
Similar Messages
-
Adobe Photoshop CC2014 internet connection very slow
Hi,
I'm developing an Adobe Photoshop HTML5 (website) extension. This is working fine in Photoshop CC, but is very slow in CC2014.
Today I've installed an update for Photoshop CC2014 and I was presented with an 'introduction' screen, loaded from the web.
This had the same slowness, indicating my extension is not at fault.
The regular functionality of Photoshop has a normal speed, and I'm working on a recent computer with Win 7 64bit.
I've recorded a video showing how slow it really is (and proof that my internet connection has sufficient speed)
http://videobam.com/gmNun
How can I solve this?
Thanks!
SamJust checked, same problem for other users
This is what's in help > system info:
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2693 MHz
Built-in memory: 8097 MB
Free memory: 3404 MB
Memory available to Photoshop: 7084 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=180, left=1920, bottom=1080, right=3520
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2112
glgpu[0].GLName="Intel(R) HD Graphics 4600"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="9.18.10.3204"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics 4600"
glgpu[0].GLRendererID=1046
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,i gd10iumd32"
glgpu[0].GLDriverDate="20130603000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 9.18.10.3204"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[80]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Hainan"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1124.2 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=2.56187e+010
clgpu[0].CLCompute=285.525
License Type: Subscription
Serial number: 90970762941485624948
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Sam\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 153,9G, 88,5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2
Plugin.dll Adobe Photoshop CC 2014 15.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
PSArt.dll Adobe Photoshop CC 2014 15.2
PSViews.dll Adobe Photoshop CC 2014 15.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2 (2014.2.0 x001)
Accented Edges 15.2
Adaptive Wide Angle 15.2
Angled Strokes 15.2
Average 15.2 (2014.2.0 x001)
Bas Relief 15.2
BMP 15.2
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.2
Charcoal 15.2
Chrome 15.2
Cineon 15.2 (2014.2.0 x001)
Clouds 15.2 (2014.2.0 x001)
Collada 15.2 (2014.2.0 x001)
Color Halftone 15.2
Colored Pencil 15.2
CompuServe GIF 15.2
Conté Crayon 15.2
Craquelure 15.2
Crop and Straighten Photos 15.2 (2014.2.0 x001)
Crop and Straighten Photos Filter 15.2
Crosshatch 15.2
Crystallize 15.2
Cutout 15.2
Dark Strokes 15.2
De-Interlace 15.2
Dicom 15.2
Difference Clouds 15.2 (2014.2.0 x001)
Diffuse Glow 15.2
Displace 15.2
Dry Brush 15.2
Eazel Acquire 15.2 (2014.2.0 x001)
Embed Watermark 4.0
Entropy 15.2 (2014.2.0 x001)
Export Color Lookup Tables NO VERSION
Extrude 15.2
FastCore Routines 15.2 (2014.2.0 x001)
Fibers 15.2
Film Grain 15.2
Filter Gallery 15.2
Flash 3D 15.2 (2014.2.0 x001)
Fresco 15.2
Glass 15.2
Glowing Edges 15.2
Google Earth 4 15.2 (2014.2.0 x001)
Grain 15.2
Graphic Pen 15.2
Halftone Pattern 15.2
HDRMergeUI 15.2
HSB/HSL 15.2
IFF Format 15.2
IGES 15.2 (2014.2.0 x001)
Ink Outlines 15.2
JPEG 2000 15.2
Kurtosis 15.2 (2014.2.0 x001)
Lens Blur 15.2
Lens Correction 15.2
Lens Flare 15.2
Liquify 15.2
Matlab Operation 15.2 (2014.2.0 x001)
Maximum 15.2 (2014.2.0 x001)
Mean 15.2 (2014.2.0 x001)
Measurement Core 15.2 (2014.2.0 x001)
Median 15.2 (2014.2.0 x001)
Mezzotint 15.2
Minimum 15.2 (2014.2.0 x001)
MMXCore Routines 15.2 (2014.2.0 x001)
Mosaic Tiles 15.2
Multiprocessor Support 15.2 (2014.2.0 x001)
Neon Glow 15.2
Note Paper 15.2
NTSC Colors 15.2 (2014.2.0 x001)
Ocean Ripple 15.2
OpenEXR 15.2
Paint Daubs 15.2
Palette Knife 15.2
Patchwork 15.2
Paths to Illustrator 15.2
PCX 15.2 (2014.2.0 x001)
Photocopy 15.2
Photoshop 3D Engine 15.2 (2014.2.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.2 (2014.2.0 x001)
Pinch 15.2
Pixar 15.2 (2014.2.0 x001)
Plaster 15.2
Plastic Wrap 15.2
PLY 15.2 (2014.2.0 x001)
PNG 15.2
Pointillize 15.2
Polar Coordinates 15.2
Portable Bit Map 15.2 (2014.2.0 x001)
Poster Edges 15.2
PRC 15.2 (2014.2.0 x001)
Radial Blur 15.2
Radiance 15.2 (2014.2.0 x001)
Range 15.2 (2014.2.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2
Ripple 15.2
Rough Pastels 15.2
Save for Web 15.2
ScriptingSupport 15.2
Shake Reduction 15.2
Shear 15.2
Skewness 15.2 (2014.2.0 x001)
Smart Blur 15.2
Smudge Stick 15.2
Solarize 15.2 (2014.2.0 x001)
Spatter 15.2
Spherize 15.2
Sponge 15.2
Sprayed Strokes 15.2
Stained Glass 15.2
Stamp 15.2
Standard Deviation 15.2 (2014.2.0 x001)
STL 15.2 (2014.2.0 x001)
Sumi-e 15.2
Summation 15.2 (2014.2.0 x001)
Targa 15.2
Texturizer 15.2
Tiles 15.2
Torn Edges 15.2
Twirl 15.2
U3D 15.2 (2014.2.0 x001)
Underpainting 15.2
Vanishing Point 15.2
Variance 15.2 (2014.2.0 x001)
Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
Water Paper 15.2
Watercolor 15.2
Wave 15.2
Wavefront|OBJ 15.2 (2014.2.0 x001)
WIA Support 15.2 (2014.2.0 x001)
Wind 15.2
Wireless Bitmap 15.2 (2014.2.0 x001)
ZigZag 15.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE -
downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?
Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it. -
Could not initialize photoshop, because the file name was not valid
Hello,
my friend (not very good with computers) asked me to fix his Photoshop 8, because "it just stopped working one day". When I try to run it, I see splash screen, initializing photoshop, something about TWAIN, and then:
Could not initialize Photoshop, because the file name was not valid
followed by crashing the Photoshop. I tried reinstalling Photoshop, resetting user preferences, even deleting all user settings from Documents and Settings folder, but nothing - I keep getting this error. I tried plugging in his camera, usb flash disks, because I thought Photoshop may created scratch file or something in there - but it didnt work.
So I decided to install him my copy of Photoshop CS3, just to make sure its some bug in Photoshop 8, but I didnt believe my eyes - after installing, im getting the exact error again.
And now Im completely lost - I was unable to google the error message, looks like Im the first person ever who happened to see it.
His computer is about two years old, 2 GHz cpu, 512 MB RAM, some decent video card, 100 GB space left on disks, operating system is Win XP SP2.
I would really appreciate any help, thank you in advance
Peter>Yes, many times.
:) never hurts to ask!
also have you tried creating a new user with admin rights to see if it's an id issue? (sorry, there's several similar theads going on and i sometimes forget what i've read where.) there was just a guy yesterday that solved a similar problem by creating a new id. we could never tell what the problem was with the old one... -
i have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
EPrintCenter: "Photo files will always be printed in 4x6". Huh?
ePrintCenter states "Photo files will always be printed in 4x6”. Is there a workaround? It seems presumptuous and restrictive to assume everyone wants to print jpg/gif pics on 4x6/PhotoPaper. I have a black&white scanned drawing that needs to be on larger 8.5x11 standard paper so I can read it.
Yes, instead of attaching the file, include this in the body of the email.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
Photosmart D5160 very slow to print
My printer takes forever to print, either from internet or Word doc. Sometimes the computer 'drops' the print request several times before printing as well. I've reinstalled the drivers but nothing has changed. Any suggestions about what I should do next much appreciated.
Hi @EastDevon,
Welcome to the HP Forums!
I understand that your HP Photosmart D5160 is very slow at printing. I am happy to help you with this issue!
For further assistance, I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer test page prints at normal speed or if it is also slow. How To Print Internal Tests.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. The Printer is Printing Slow.
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Safari 4.1 very slow & not loading
Hi,
I'm running Safari 4.1 and it's very slow and pages don't load properly. I reset Safari with all of the options checked off and it's still the same. I've read several posts and I saw many different ideas and fixes but not sure which one would pertain to my situation. Any advice would be appreciated!Welcome to the forums!
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit. Control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode)
Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
If you use a router, does it have the latest firmware installed?
Adding DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
(An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
Wikipedia also has an interesting article about Open DNS:
http://en.wikipedia.org/wiki/OpenDNS
Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
This is Apple's guidance on iPv6:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
Also, third-party add-ons created for a previous version of Safari may cause problems:
http://support.apple.com/kb/TS3230?viewlocale=en_US
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
More useful information here:
http://guides.macrumors.com/SpeedupSafari -
Flash player loading files very slow and getting stuck after 100%
Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava DHello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D -
Officejet 6700 very slow to print does not scan to Imac
I just purchased a new officejet 6700 from Costco it takes at least 10 min to print if at all and does not scan to Imac the current osx is snow leopard 10.6.8 using an airport time machine as a my wireless router / backup I have charter internet with ARRIS modem model # TM502G its also very slow to run any functions in the hp utility I did notice that the home network ip and printer ip are different don't know if that is an issue or not any help would be appreciated thanx.
Hello kennethburland,
Welcome to the HP Forums! I understand your concerns with your Officejet 6700 Premium.
What program are you printing from? Do you notice this issue occur from using multiple program(s)?
Please follow this entire HP document on Slow Printing. Make sure you choose your correct operating system.
You did indicate that your printer's IP address and your home network are different. The first three numbers of the IP address should be the same, but the last number(s) should be different. Please reference this HP document on Wireless Basic.
Are you receiving any error message indicating why you are unable to scan a document to your computer?
If you are receiving a "Connection Error", then please follow this HP document here. If the scanning software isn't responding, then follow this HP document here.
Please inform me your troubleshooting steps.
I worked on behalf of HP. -
Photoshop CS3 opening files painfully slow on a Mac
We're having an issue here at work where Photoshop CS3 is very slow in opening files of any size on our Macs.
We're running 10.5.8 on 2x2.66 GHz Dual-Core Intel Xeon MacPros with 3 of them having 8 gigs of ram and my machine running 12 gigs.
I've tried doing a bunch of research on the issue, but all I can find about it has to do with the issue on a Windows machine involving the network/default printers. I've tried deleting both our network printers and adding them again after a restart with no luck. We've even tried deleting the Photoshop preference file along with the Adobe Mediabrowser preference.
If anybody has any thoughts on how to fix this (aside from upgrading to a newer CS), they would be greatly appreciated.
Thanks in advance!Ok, I think I found a little work around that so far, for the past hour or so is working good. Files are opening up a lot faster.
What I did was create a virtual default printer following instructions I found Adobe's site...
1. Open System Preferences, and select Print & Fax.
2. Choose the + sign to add a new printer.
3. Choose IP.
4. In the Protocol pop-up menu, choose Line Printer Daemon - LPD.
5. In the Address field, type in localhost.
6. After Generic PostScript printer displays in the Print Using field, click Add.
7. Close out of the Print & Fax preference or Quit System Preferences.
http://helpx.adobe.com/x-productkb/global/set-default-printer-print-center.html
Once I did all that, I had to go into the Preferences and delete the Photoshop and Mediabrowser preferenses and then restart the computer. Hopefully this fix sticks, but if not, I'm sure I'll back to see if anybody has any other ideas.
Thanks for all the help guys, I really appreciate it.
EDIT
Well, it's been a few days and it looks like I may have spoke too soon on the above fix. Photoshop seems to be slowly reverting back to the problem. -
CS6 After Effects PNG export very slow - Not Multi-Threaded?
I am rendering an after effects project consisting of over 320,000 source frames of 4000x4000 resolution, outputting over 250,000 frames as PNG files.
Rendering is instant on our machines, all time is spent "compressing and writing" frames. It is taking forever.
We have several machines that are all windows 7, with 16 physical cores, 64GB ram, connected to a 4Gbit SAN.
I did some experimenting, tried using all 16 cores, or 8 cores, or disabled multi-frame rendering even. When this project is rendering my cpu usage is almost non existent,. maybe 1%-5% at times.
with 16 frames at a time being rendered it is averaging between 1 and 7 seconds per frame depending on the content of the frame.
Does Adobe have any plans to multi-thread the PNG exporter? or is there a faster 3rd party plugin out there i could use? It is very slow and doesn't tax the CPU's at all. Even on a single core it doesnt even use 100% cpu while its saving.
I even tried loading one of the frames into photoshop and simpy hit save as a PNG and it took almost 15 seconds to compress and save. I did it again without compression and it saved the 40MB raw file instantly.
That is terrible performance for machines like mine that are pretty much the fastest things out there.
Thanks!I appreciate your attempt for a workaround solution, however as you well know you can't render to a video file from multiple machines. we must output directly to individual frames, I setup 8 machines to work on this project, if we did not use compression then we would be writing over 300MB/sec of data which would not be good for our fibre network which unfortunatly is only 4Gbit. And it would be about 10TB of data total.
As for your workaround Im not sure we could gain speed with your method either way. spending the extra time to encode to a lossless format and then process again in AME sounds like it would take even more time, unless AME could create PNG files at some sort of ridiculous speed maxxing out every core at 100% or something to compress the PNG's. Out of curiosity I will throw some frames at AME and see how long it takes to compress and how much cpu it will use.
thanks -
Dreamweaver CC opening files very slow iMac with Fusion drive
I am working on a small website based off on Bootstrap 3. Now that I am almost done with the project opening files take a few seconds to open them (in code view). I have tried the various fixes like resolveremoteurltoipaddress=FALSE but still the files load very slow. On my Windows Machine it loads very fast and that machine is 4 years old. The iMac I am using at work is the latest version with decked out specs and only Dreamweaver CC and Edge Code have very slow opening of files. Creating new documents inside Dreamweaver CC is fast. Is there a way to make Dreamweaver open files faster? How to make it load faster, open documents faster, especially in code view. My initial thought is maybe its because I am linking to a few JS library like TypeKit and jQuery but I have not experience these problems on my Windows PC. Any help would be appreciated.
I am working on a small website based off on Bootstrap 3. Now that I am almost done with the project opening files take a few seconds to open them (in code view). I have tried the various fixes like resolveremoteurltoipaddress=FALSE but still the files load very slow. On my Windows Machine it loads very fast and that machine is 4 years old. The iMac I am using at work is the latest version with decked out specs and only Dreamweaver CC and Edge Code have very slow opening of files. Creating new documents inside Dreamweaver CC is fast. Is there a way to make Dreamweaver open files faster? How to make it load faster, open documents faster, especially in code view. My initial thought is maybe its because I am linking to a few JS library like TypeKit and jQuery but I have not experience these problems on my Windows PC. Any help would be appreciated.
-
File spooling but not printing - InD CS3
I am at a loss as to why InD CS3 (and Acrobat and Reader) will not print to a shared printer. Illustrator CS3 and Photoshop CS3 will print to this shared printer. Why not InD CS3? This has been ongoing since CS3 came out.
The file spools, all images and fonts are downloaded but the file never appears in the print queue. Not on the originating machine or the sharing machine. It just vanishes.
CS3 Pro versions Loaded on Mac G5 dual 2gig (non-intel) running Tiger. Three other machines have the same issue. All various machine configs (G4 single/Tiger, G5 dual 1.8/Tiger, and an Intel iMac/Leopard).
- Printer is shared through a networked G3 running Jaguar (yeah, yeah, working on it).
- The printer is an Epson SP1400
- All drivers updated on all machines.
- All CS3 patches done.
- Permissions done.
- OnyX system maintenance done.
- Preferences trashed. Machines restarted (printer and macs).
- The InD CS3 file can be printed from CS3 to a networked Panasonic postscript printer. So it's not the file.
- The InD file can be saved down using Interchange to CS2 and that will print to the shared printer.
- The InD CS3 file will print to this printer if the printer is connected directly to the machine it is printing from.
Apple and Epson have pointed out that because other CS3 apps do print to the printer, there is something going on with InD, Acrobat and Reader and the sharing function. Is it the G3 and Jag? Or something to do with CUPS or .local or a sharing protocol? Please help me out with this.Anything interesting in the logs on the printing machine or the sharing machine?
In the Print button in the Adobe Print dialog, click the popup to Error Handling and tell it to cough up an error page if it fails to print. Maybe the printer will give you feedback about why it's failing then.
If that does nothing, then what if you print the file to postscript and drop the PS file onto the printer icon in the Dock? That would at least guarantee you were getting a file and let you experiment with why it isn't making it all the way through the process.
A final thought is to raster it completely [make a Transparency Flattener set to 100% raster @ whatever DPI] and see if just a bitmap will print correctly. That tells you if it's something weird with the postscript at least.
It's all guesses, really. But at least it might give you something new to play with... Best of luck! -
Very slow wireles printing MG7500
Hello, Two days ago purchased the MG7520 printer. Set it up today and it connected to my wireless (Dish network, satellite). Printing a regular Pages document is pretty slow, but printing a photo is nearly impossible - so very slow it would take 30 minutes to print a 5 X 7. I printed a Network Configuration Page, the signal strength is 100%. I'm running OSX Yosemite on my MacBook Air that is connected to the printer. Not sure what to do next - any suggestions? Thanks to everyone here in advance :-).
Hey, thanks for your help! I tried re-connecting the printer to wireless and moved it somewhat closer too with an unobstructed view. It still printed slow but faster than before, so I think it is definitely the wireless connection. But, just to make sure will pick up an ethernet cable this week and try that. Will also try the USB when I have time later in the week. I have to say that the photo I printed today is exactly the color of the subject so I am VERY pleased with the color printing capability of this printer. And, also very pleased that everything is working fine on the printer regarding both document and photo printing. Thanks again!
Maybe you are looking for
-
Problem with Jtree and a checkbox
Hello, I have a problem with my tree implementation. I create a tree and i want to add a checkbox in each node. this is my code : DefaultMutableTreeNode root; root = new DefaultMutableTreeNode(new JCheckBox()); DefaultTreeModel model = new DefaultTre
-
How to move photos from one hard drive to another without losing data?
I have lightroom latest version. I have an in-computer hard drive full of photos. It is clogging the machine and I am running out of storage space. To make room, I would like to transfer most photos to an outboard portable hard drive. How do I do
-
PC calendar Programs that can sync to BB
Can anyone tell me what PC calendar programs are available that will sync to BB besides Outlook? Does BB Desktop Manager have a calender built in? If so I can't find it. If not, why not? Thanks...totally frustrated with my new Curve.
-
Why won't my folders open when I click on them?
My Mac has been doing some irritating things over the past month or so. When I click on an arrow to open a folder with multiple subfolders, for instance, it often won't open. I have to click it repeatedly. It will finally open. Or if I click on somet
-
Hello, I'm using .NET connector to invoke SAP RFC. I want to know if is there any posibility to use it without proxies. I don't want to generate one proxy for each BAPI I need a more generic method. Any idea or information will be very wellcome. Than