Photoshop loads part of file and stops...HELP!

Please watch the video and let me know. I could not embed the link so here it is. copy and paste. thanks
http://youtu.be/rMi2RwCDT2s
The problem I have is that when i open this file only, it starts to load and then stops and the curser just spins. I have tried to let it go overnight and in the morning it still is spinning. all other functions of Photoshop are locked and I have to use ctrl alt delete to get out of photoshop. other files open just fine so i'm wondering if this file is corrupt or not.

thanks. that was what I was afraid of. the problem with just placing the file is that I loose all channel info. I guess I will have to start over. I reset my PS preferences just in case that had something to do with it, hopefully it wont happen again. thanks!
Kyle Miller
Graphic Design
Premier Screen Printing
Removed personal data as per privacy policy for Adobe Forums
by: Mandhir Bhatia

Similar Messages

  • Itunes trys to load my genius files and stops at the same point everytime

    Itunes trys to load my genius and it freezes up evertine after the progress bar gets under the in in information. I have to close out the program in order to regain controlle of the computer.

    Maybe:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues

  • I down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    i down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    Unless it has recently changed you can only watch rentals on the device or mac you rent them on.

  • Loading a CSV file and accessing the variables

    Hi guys,
    I'm new to AS3 and dealt with AS2 before (just getting the grasp when the change it).
    Is it possible in AS3 to load an excel .csv file into Flash using the URLLoader (or ???) and the data as variables?
    I can get the .csv to load and trace the values (cell1,cell2,cell3....) but I'm not sure how to collect the data and place it into variables.
    Can I just create an array and access it like so.... myArray[0], myArray[1]? If so, I'm not sure why it's not working.
    I must be on the completely wrong path. Here's what I have so far....
    var loader:URLLoader = new URLLoader();
    loader.dataFormat = URLLoaderDataFormat.VARIABLES;
    loader.addEventListener(Event.COMPLETE, dataLoaded);
    var request:URLRequest = new URLRequest("population.csv");
    loader.load(request);
    function dataLoaded(evt:Event):void {
        var myData:Array = new Array(loader.data);
        trace(myData[i]);
    Thanks for any help,
    Sky

    just load your csv file and use the flash string methods to allocate those values to an array:
    var myDate:Array = loader.data.split(",");

  • HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

    After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

    Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

  • I've lost come photoshop cs 8.0 files and have been told by a recovery company that they can't be saved. Is this true?

    I've lost some Photoshop cs 8.0 files and have been told by a recovery company that they can't be saved. I've attached a screen shot of what seems to remain of one of the files.  You will see it has 3 different icons that correspond to it. One a 'thumbnail'; one a 'meta' and one an 'exec' file. I have no idea what this means and whether or not someone more experienced in recovery can tell me if these kinds of files are salvageable.  Any kind of input would be great. I'm not well versed in the language that's probably involved in describing this...

    This is where the icons that appear are located - not the original files.
    The icons are straggler files.  No your original files would not be located there.  The original files (.app files) would be located inside the Application folder.
    In fact - I really don't even know why these icons are still on the computer.
    It's because when the files were deleted, you did not use an uninstaller.  I do not use Photoshop, but if it comes with an uninstaller, when using same, the uninstaller gets rid of all the straggler files that are attached to the application.  3rd party uninstallers also get rid of straggler files. 
    I have no idea what they mean or what their function is.
    To know what they do, you should post over in the Adobe Forums: Forum: Adobe Photoshop forum area.  It's where all the Mac Photoshop users hang out.  These users will be able to explain to you which files you can safely remove associated with your "lost" files.

  • Loading different flat files and consolidate in one BEX

    I want to know in SAP BW how is the best way to load different flat files and loading them into a Consolitaded Infocubes o DSO to show in a Bex report. This files have the same estructure.

    you need to create a datasource with the exact structure of your files... then this datasource will be linked with your cube via transformation.... you need to define the characters, key figures and time character ..
    load file to datasource.. then to cube....then it will be available for reporting

  • Photoshop does not close files and the program does not quit.

    I have been on the phone with tech support for over an hour. Photoshop does not close files and the program does not quit. I am on a Mac and I am using Photoshop CC 2014.

    Have you tried uninstalling Photoshop CC and re-installing? Another thing to try is to remove all Photoshop CC plist files. There is also the Cleaner tool:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Why when i connect my phone to my laptop do my recent photos load as image files and not jpeg

    why is it that when i connect my phone to my laptop my recent photos load
    as image files and not jpeg as they used to.Is this another issue with ios 8

    Thank you. I did that and made sure my phone was open to the camera roll. I was able to locate the import command and the photos appeared. Thanks so much!

  • I have just load form Pdf file and saved try to sign or type the form,it will not let me?

    Downloaded PDF file and try to type the form or sign the form, it it will not let me?

    From: Pat Willener [email protected]
    Sent: 11 December 2012 02:36
    To: chandabajaj
    Subject: I have just load form Pdf file and saved try to sign or type the form,it will not let me?
    Re: I have just load form Pdf file and saved try to sign or type the form,it will not let me?
    created by Pat Willener <http://forums.adobe.com/people/pwillener>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/4911163#4911163

  • Using a container to load several swf files and play them

    I need some help. I want to use several swf files and have them be called upon in a container file and play them in sequence. It's a presentation that needs to play thru but still have the ability to stop, click on items, open a popup and then continue on in the presentation. I am building all the individual "chapters" and their "sub-chapters" as swf files, with the hope that I can load them in order. I am relatively new to AS3. Help?

    If you will be loading swf files into a container then you will use the Loader class to accomplish that, so give that a looking over in the help documents and see what you can do.  If you have a problem getting it to work, post your code and describe what you have done.

  • Powerbook G4 Loads to blue screen and stops!!!!

    Hi,
    I am running OS x 10.5.8 on my g4 powerbook. Its been no problem since I updated several months ago. Just in the past couple days my computer has been doing many odd things. Not loading sound drivers, slow operation and most painful is that when start up happens, it loads to the blue screen and stops and will remain there for some time and I have hard reset it. Then I try again usually 2-3 times. I have completed the permission repairs and done PRAM twice. Still loads up to blue screen and remains..
    Can you please help me!!!

    Try starting up from your latest OS installer CD or DVD. If the machine starts up from the disc, open Disk Utility from the Utilities menu in the Installer application, select your internal hard drive, click the First Aid tab, and check the hard drive's SMART status near the bottom of the DU window. If it is Verified, run the Repair Disk routine, and if any repairs are needed, run that routine repeatedly until no further problems are noted and repaired. Then try starting the machine normally from its hard drive.
    If the hard drive's SMART status is Failing, replace the drive. You can salvage un-backed-up files from it after you get your machine back up and running again.

  • When I try to download Firefox for Windows, it unzips the file and says it cannot find 7-Zip file and stops download

    I have windows 7 on a desktop. I had firefox before which worked fine then I attached a router to my computer that may have been defective and may have damaged the computer. I took the router off. Firefox suddenly reverted back to the start up page of when you are new to firefox, e.g. here's how it works, and stopped loading my normal home page. Even though I entered the tabs I wanted for my startup home page every time I shut down my computer it went back to the beginning thinking I had only just loaded it. I did lots of system diagnostics but nothing appeared to be wrong with my computer so I uninstalled Firefox, restarted, then downloaded it again. When I download it, it says run or save and I choose run. Then it extracts the file and a message comes up that says "7-Zip. Cannot find file. Then nothing more happens. No files are downloaded to my computer and it's as though I never tried to download it.

    SAVE the installer to your hard drive (do not use the "Run" option); save it to your Desktop so that you can find it. When the download is complete, close whatever browser you have open, click or double-click the file you downloaded and see if it installs without a problem.
    The downloader is a self-extracting archive and should not need or use 7-zip. I have 7-zip installed on my system and it does not interfere with nor is it used in the Firefox install process. Hopefully, you have not set the downloading of .exe files to be associated with 7-zip.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Migrating data failing on one file and stopping?

    Hi
    I'm trying to migrate my iTunes library to a new MBP I've bought.
    I'm following all the good advice in these forums about using consolidate library to do this. But the trouble is, I leave it doing the 4-5 hour operation, only to come back and find it's failed about an hour in on a particular file and then stopped. I see this as a OS X / Finder issue as all steps from iTunes forums have been followed.
    The error is 'iTunes cannot read or write...' on a particular track.
    Other than deleting this track (which won't necessarily help if this happens again on a different track another hour in) how can I just force it to finish the job and discard broken files if necessary.
    OR, how can i get Finder to tell me first which are the suspect files so I can remove or reimport before migrating?
    I've tried the obvious things of Disk Verify and Repair (no errors), and the files play fine in their current location.
    Thanks in advance....
    Dan.

    DJH2007 wrote:
    Hi
    I'm trying to migrate my iTunes library to a new MBP I've bought.
    I'm following all the good advice in these forums about using consolidate library to do this. But the trouble is, I leave it doing the 4-5 hour operation, only to come back and find it's failed about an hour in on a particular file and then stopped. I see this as a OS X / Finder issue as all steps from iTunes forums have been followed.
    The error is 'iTunes cannot read or write...' on a particular track.
    Other than deleting this track (which won't necessarily help if this happens again on a different track another hour in) how can I just force it to finish the job and discard broken files if necessary.
    according to that message it's an itunes problem not a finder problem. it says that itunes can't read some track. this means that the audio/video in that track is corrupt not the file itself in finder. finder should be able to copy/move that file without any issues. you can try that.
    I suggest you delete that track from itunes library and retry library consolidation.
    OR, how can i get Finder to tell me first which are the suspect files so I can remove or reimport before migrating?
    I've tried the obvious things of Disk Verify and Repair (no errors), and the files play fine in their current location.
    Thanks in advance....
    Dan.

  • Execution from JAR files and Classpaths -- Help

    I am confused about how classes are resolved when running from within a JAR file, and why this is different than running a class that is not inside a JAR file.
    I have an application that uses classes from a third party library stored in a JAR file (biojava.jar) . If I run the app from the class file it works as expected and is capable of finding the external classes when the path to the biojava.jar is on my classpath. It also works if biojava.jar is instead placed in the extensions folder jre/lib/ext folder without an explicit path entry in my classpath.
    However when I package all my application classes up in a JAR file and try to execute the application from the JAR file it will ONLY work if I add a manifest entry to myApp.jar ... Class-Path: biojava.jar AND I place the file biojava.jar in the SAME directory as the Packaged JAR application. I would like to find a way to make this JAR file work for anyone who has biojava.jar in their classpath or ext directory. In other words I don't want my user community to have to copy the biojava.jar file when I email them myApp.jar. This community will already have biojava.jar on their CLASSPATH.
    How can I make my app within a JAR recognize either the user's CLASSPATH or ext folder? I have tried reading the documentation and many experiments but the only way it works is as described above.
    I am running Running Windows 2000.
    java version "1.4.1_01"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01)
    Java HotSpot(TM) Client VM (build 1.4.1_01-b01, mixed mode)
    Here are the results of my experimentations:
    The following Works:
    Manifest: Main-Class: org/biojava/app/SequenceSpiral
    Manifest: Class-Path: biojava.jar
    Place biojava.jar in the same directory as SequenceSpiral.jar
    java -jar SequenceSpiral.jar
    This works perfectly
    NONE of the following work
    0) Placing biojava.jar in my jre/lib/ext directory instead of the same dir as SequenceSpiral.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: org/biojava/bio/seq/FeatureFilter
    (this is the first class referenced from biojava.jar)
    1) Just see if it will find the proper jar on my classpath
    Manifest: Main-Class: org/biojava/app/SequenceSpiral
    I have biojava.jar on my classpath but not in same directory as SequenceSprial.jar
    java -jar SequenceSpiral.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: org/biojava/bio/seq/FeatureFilter
    2) Specify the name if the jar in the Manifest Classpath and see if it will find the proper jar on my classpath
    Manifest: Main-Class: org/biojava/app/SequenceSpiral
    Manifest: Class-Path: biojava.jar
    I have biojava.jar on my classpath but not in same directory as SequenceSprial.jar
    java -jar SequenceSpiral.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: org/biojava/bio/seq/FeatureFilter
    3) Specify the path of the jar in the Manifest Classpath
    Manifest: Main-Class: org/biojava/app/SequenceSpiral
    Manifest: Class-Path: d:/biojava/biojava.jar
    I have biojava.jar on my classpath (D;\biojava\biojava.jar) but not in same directory as SequenceSprial.jar
    java -jar SequenceSpiral.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: org/biojava/bio/seq/FeatureFilter
    (note that in this case it is not fnding my main even though the Main-Class is specified)
    4) Specify current directory and biojava.jar in the Manifest Class-Path
    Manifest: Main-Class: org/biojava/app/SequenceSpiral
    Manifest: Class-Path: .;biojava.jar
    I have biojava.jar on my classpath (D;\biojava\biojava.jar) but not in same directory as SequenceSprial.jar
    java -jar SequenceSpiral.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: org/biojava/bio/seq/FeatureFilter
    5)Specify current directory and the URL of biojava.jar in the Manifest Class-Path
    Manifest: Main-Class: org/biojava/app/SequenceSpiral
    Manifest: Class-Path: . d:/biojava/biojava.jar
    I have biojava.jar on my classpath (D;\biojava\biojava.jar) but not in same directory as SequenceSprial.jar
    java -jar SequenceSpiral.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: org/biojava/bio/seq/FeatureFilter.
    Thank you very much for any help or suggestions,
    David Maynard

    I did some more testing and I think I now understand what is going on.
    I don't like it, but at least I understand it.
    The problem: I have an app packaged into a JAR file, myApp.jar. It has a dependancy upon an external JAR file extern.jar.
    extern.jar is on my Classpath (and also in jre/lib/ext)
    1) For some reason (bug?) java -jar myApp.jar does NOT use the classpath or the jre/lib/ext mechanisms to find .jar files needed to resolve references to external classes. This seems to be true even if you add an explicit -classpath argument on the command line!
    thus
    java -jar -cp c:\\absolutePathToMy\extern.jar myApp.jar
    also fails as does
    java -cp c:\\absolutePathToMy\extern.jar -jar myApp.jar
    2) Inside the myApp Jar file you can specify a URL to an jar extension jar file but the URL IS RELATIVE TO THE PATH WHERE THE myApp.Jar is executed from! If I add the Manifest item Class-Path: ..\..\..\myexterndir\extern.jar then
    java -jar myApp.jar
    works correctly and resolves the external references.
    This is why several people have reported that this class-path mechanism works ONLY when the extern.jar file is in the SAME DIRECTORY as the myApp.jar file when they had added a Class-Path: extern.jar to the Manifest.
    However together these two items make it IMPOSSIBLE to distribute myApp.jar to others and have it work since the path names statically encoded inside the jar are relative to where the jar gets executed from. If I move myApp.jar to a different location on my hard drive it may also fail.
    In my case I know all my customers already have extern.jar (5MB) installed on their classpaths and I would like to just send them the myApp.jar ( .5MB ).
    However I don't see how to do this given the current specification of a JAR file, and the bug that makes all -jar file act like they have the Sealed=true property.
    I tried explicity setting Sealed=false in the manifest but this didn't seem to have any effect.
    I hope that this will save others the many hours of time it has taken be to determine that JARS are not well suited for deploying apps with dependenncies on external libs.
    I also hope that someone can show me how execute a JAR and specify a classpath that doesn't get IGNORED my the classloader used in loading the jar classes.
    This is using java version:
    java version "1.4.1_01"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01)
    Java HotSpot(TM) Client VM (build 1.4.1_01-b01, mixed mode)
    Does any one know this bug is fixed in a later release?
    David Maynard

Maybe you are looking for