PhotoShop not linked into LR

The Install did not find Photoshop CS installed. The [Library] Photo - Edit in Photoshop menu selection is greyed out.
Preferences - External Editors allows me to set an alternate application, but does not allow setting the Photoshop path.
Anyone else have this happen or know a cure?

Maybe this can help you:
This was posted in this thread:
Lightroom does not recognize Photoshop CS2
?1) Run regedit.exe from start menu->run ?2) Look for this folder: ?HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\App Paths\photoshop.exe ??In that folder, there should be a key "Path" and its value should be the folder where Photoshop CS2 (or any other Photoshop version) is installed." ??My registry didn't have that folder, so I created it and added a "Path" key with the value being the path to Photoshop CS2: C:\Program Files\Adobe\Adobe Photoshop CS2\
Make sure to make a backup of your registry before you apply any changes.

Similar Messages

Multiple Edits in Photoshop not saving into Lightroom?

In Lightroom 3 I was able to edit in Photoshop, save the file, then make another edit in photoshop and save it under a different name, and that file would also show up in Lightroom.
For example;
in Lightroom I select "Image 1" and select edit in photoshop,
I edit this in photoshop and save.
Lightroom shows "Image 1-edit"
I make another edit and select "Save As" and save it as "Image 1 Alternate".
"Image 1 Alternate" shows up in Lightroom next to "Image 1-edit"
This does not appear to be happening with Lightroom 4. Is there a setting I'm missing somewhere?
Thanks for your replies

Medic1542 wrote:
Additional "save as" edits are saved into Lightroom 3. It does not "break the link".
I'm assuming here that you are using Photoshop CS5.x and the current version of Camera Raw? If so, this is as expected...LR4 is using a pipeline that will match up to ACR 7 when it's released.
As it is now, LR4 must actually do the processing prior tp sending it to Photoshop. LR4 also has to save the file on disk prior to sending it to Photoshop.
If you were using ACR 7 in CS6 then ACR would actually be doing the processing and the behavior of this way of opening in Photoshop does NOT have to save the file prior to sending it to Photoshop. When ACR does the opening, you can do a Save or a Save As and Lightroom will know about those saves. Pretty LR4 doesn't know where the Save As file goes to and that's why it isn't showing up.
The two basic behaviors; LR synced with ACR and LR not synced with ACR goes back to version 2 (I think). It's a limitation in LR when LR and ACR aren't in sync.

Photoshop not linking to new license

Just re-newed my subscription to Adobe CC however chose the new photoshop and lightroom bundle. Photoshop is not yet associating with the new licence. How to link the account..

Cleared cache, restarted laptop and re-logged into my adobe account. Checked my account at https://www.adobe.com/account/my-products-services.html#MyServicesHeader and nothing is registered Huh .. Adobe has taken my cash but there is no registered products or serial numbers? Nothing at all...

Index links do not import into Acrobat 5.0

I created a long indexed document in InDesign CS2, the entries appear in the index, and there is a ^ where each entry is marked as being in the index. I generated the index with the book (405 pages).
When I export the document to .pdf using Acrobat 5.0 the Table of Contents works fine and when selected takes me to the correct area. When I select an entry from the index, I am taken to the 1st page of the Main Table of Contents (the first page of the document).
I took the document into my personal copy of InDesign CS3 and import it into Acrobat 8.0. I experience the same problem but the TOC also does not link.
Any Suggestions.
Russell

Well, since you are the user in this user to user forum who has a solution... how about posting that step by step solution in case someone else ever does a search?

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

Firefox 5.0 does not open link into new window

Firefox 5.0 does not open link into new tab. I have a netbook also and tab options work fine, links open into a new window. However on this Dell it does not work. Tab options in Firefox and Google are set right, but don't work that way. Running Windows 7 on Dell, Windows Starter on netbook.

The Template .dwt file is only used locally by DW itself, there's no reason to upload it to the server unless you intend to share it with someone. You have to upload each individual page that the Template updates, every time you update the template and propagate that change across the child pages.
It would probably be better to use a server side include. That way, you could update one file then upload it and all of your pages would automatically carry that update...
SSI for Apache: http://www.javascriptkit.com/howto/ssi.shtml
PHP's version: http://www.tizag.com/phpT/include.php
It's especially handy if your site gets to the point where you have more than about 20 pages.

Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone for security purposes (not linked to cloud, mobile, Microsoft, Adobe, etc)?

We have installed a trial version of Photoshop Elements and plan to do so for Premier Elements. However, for security reasons, it is of no use to us unless we can install and use it standalone (not linked to cloud, mobile, Microsoft, Adobe, etc.). Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone as described above? If so, what do we need to do regarding installation/configuration/patching to test this? Thanks in advance.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Why will Lightroom photos not launch into Photoshop CC?

I just started Creative Cloud Lightroom and PhotoshopCC. When I try to move Lightroom 5 photos into Photoshop I get a message that says "The file could not be edited because Photoshop CC 2014 could not be launched." Even though I go to "photo" header in Lightroom and scroll to "edit in Photoshop CC 2014" it launches into my old Photoshop 4; I deleted Photoshop 4 but photos still won't go to Photoshop CC 2014. Frustrating. Would appreciate some suggestions. Thanks.

I suspect the problem is with Photoshop, not Lightroom. Uninstalling older versions of Photoshop after installing a newer one is known to potentially cause a lot of grief in some cases.
What happens is that the old version takes a lot of registry settings with it on the way out - leaving behind empty pointers to itself rather than the newer versions which it is not aware of. Lost file associations is a classic.
Sometimes these pointers can be re-established easily, but in other cases a full uninstall/reinstall is needed, perhaps with a run of the CC cleaner tool tossed in to clean the slate. Or, if you have the stomach for it - manually editing the registry. But then you should know your way around and backup as you go.
With Photoshop, the safe procedure is to always uninstall in strict reverse version order, then reinstall the newer version.

TOC not generated for FM9 book linked into RH8

Hi all,
I have a book, originally authored in FM7.2 and imported into FM9, that is linked into a RH8 WebHelp project. I can't get a TOC generated from the FM TOC within RH8 as advertised.
The book has a TOC with two levels: chapterTOC and section1TOC, e.g.,
1. My First Chapter...........1
      Introduction..................1
      More About That..........10
      And So On..................90
The chapterTOC style uses a font that is both bolded and larger than the section1TOC style, and section1TOC is indented, as can be seen. So I'm expecting good things from RH8 re the TOC, because this is apparently all that is needed for RH8 to correctly parse the TOC.
In RH8, I linked the book into the project, right-clicked on the book file, checked the "Convert FrameMaker [TOC]" checkbox, and gave "TOC1" as the name of the new associated TOC. Edited the properties of the WebHelp layout so that the TOC used was TOC1. Right-clicked on the book file in the Project Manager and chose "Generate". TOC1 was empty, so I click "Generate Primary Layout". When that's done, the TOC is still empty.
Any suggestions?
Thanks,
-Adam

An update: the TOC entries are recognized if the styles are formatted in Times New Roman. It turns out that if the font weight has the choices "Regular" and "Bold", then the TOC style is recognized. If the font has choices for weight of "Light", "SemiBold", or "Bolded", the TOC entry is ignored. Hence TOC styles that use Times New Roman work, and styles that use fonts like Elephant and Bookman Old Style do not.
Good times.
-Adam

I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I can not sign into adobe photoshop 10 with my e-mail what should i do

I can not sign into adobe photoshop 10 with my e-mail what should i do?

Hi bernedette57waiser,
Can you provide us with more details about any error messages that you get when you try to log in?
Thanks,
Preran

In google searches, selecting the advertised links do not load the page I have to copy the link into the address bar to load, how can this be fixed?

Hi,
When I select one of the advertised links in a google search, the tab flashes and looks likes it's loading but nothing happens. If I copy/paste the link into the address bar it works OK. It also works correctly using IE.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
* [[Searches are redirected to another site]]

Embed Photoshop Web Gallery Into Site

I have been furiously scouring the internet for a tutorial,
walk though, or simply any information at all on how to embed a
Photoshop Web Gallery into a website that I'm creating using
Dreamweaver; unfortunately, I have found nothing of value. The
closest thing I found is someone saying "I just copied the html to
a table in dreamweaver..." which doesn't help a complete novice
(like me) at all.
If anyone could direct me to a thorough tutorial or writeup
the steps to take it would help me
tremendously. Thanks in advance for any and all help.

> Is it possible to embed a Web gallery that is in my
remote files into a
> template page so it will match my Web site?
Yes. Let's see your page as it stands now. Can you upload it
and post a
link?
The Object Not Found message means that there is a javascript
object that
has been left out of the page. A look at the code will tell
which one that
is.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sumnerweb" <[email protected]> wrote in
message
news:g6l8h6$m2b$[email protected]..
>I used CS3 to creat a Web gallery. We like all of our
pages to use our
>server
> side includes. I tried copying the code from the Web
gallery index page
> into
> one of my pages, but it didn't work. I get the gallery
heading and info,
> but no
> pics. Where the thumbnails and images should be I have
"Object not found!
> The
> requested URL was not found on this server. the link on
the referring page
> seems to be wrong or outdated. Please inform the author
of that page about
> the
> error."
>
> Is it possible to embed a Web gallery that is in my
remote files into a
> template page so it will match my Web site?
>

How can I change Adobe Photoshop Elements 10 into English version?

It's strange for the second download shows Franch, how to change it to English version? Thanks.

Thanks for response. I purchase Photoshop Elements 10 from App store, the first install is ok-in English, but my computer reset for some problem, so I installed it again. But this time, it's not English version but the other that I cannot recognize. How can I do? I forgot to save the serial number, where can I check it?
Thanks for help.
Jeff A Wright 於 2012/1/8 上午5:40 寫道：
Re: How can I change Adobe Photoshop Elements 10 into English version?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
The language is tied to the serial number. Did you purchase the software directly from Adobe?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4124186#4124186
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4124186#4124186. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Complaint wth ref. to invoice in CRM - Copy control not taken into account!

Hi all,
We are facing problems when replicating return orders (business object Complaint) with reference to invoices in ERP.
The copy control in ERP is not taken into account. Does anyone know if it is possible to check the copy control when replicating the complaint to ERP with reference to the invoice?
The return order is being replicated correctly and the link to the invoice is shown (so, the flow is correct).
But:
1.- The manual pricing conditions in the invoice in ERP are not being copied in the return order.
2.- Some data as the 'Incoterms' is being redetermined from the customer master data and is not being copied from the invoice.
3.- Data related to material is also being redetermined when the order is replicated
The copy control is not being taken into account and we can replicate return orders from CRM to ERP with reference to invoices for which the copy control is not maintained in ERP...
Please help...
Thanks in advance!
Yolanda

Try something like this, in place of ls_input_field_names-fieldname = 'ZZDEP2PVNDPGM'..
ls_input_field_names-objectname = 'ORDERADM_H'.
ls_input_field_names-ref_handle = '100'.
insert ls_input_field_names into table lt_input_field_names.
Edited by: Kevin Alcock on Aug 10, 2009 4:03 PM

PhotoShop not linked into LR

Similar Messages

Maybe you are looking for