Photoshop not opening any of my video files. Help!

Up until yesterday, my Photoshop CC has been able to open all my video files for me to make gifs with them. Today I tried a video file and I get the error message "Cannot open this file". I even tried a video file I just made a gif yesterday and I get the same message. I rebooted, same message. I do have the most recent version of QuickTime installed and I am able to play the video files on there. I've even tried opening the file in Bridge and sending it over to Photoshop. Still nothing. I've tried multiple video files in .avi, .mov, .mp4 and MPEG-4 format and nothing is working. I've read several posts where people are having the same problem I've tried all of the soultions to no avail.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Similar Messages

I can not open any of my Numbers file on my mac book pro

all my page and numbers files seem to have trouple to be opened. I can't open any file that's on icloud. help?

If you had iWork '09 installed on your system then that older version is probably being launched. See the if the tip below helps.
Need newer version of Numbers to open file

Ipod not showing any music or video files!

I just spent hours loading about 2 gb worth of songs and videos onto my new 5G ipod last night. When i turned the ipod on this morning, there were no files (no songs, playlists, video, etc.) However, when i check "settings-->about", the info is showing that I have 2 gb used, which is correct. Why is this happening and how do I fix it????

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Purchased new camera nikon d7100 and camera raw will not open any nef files, talked to tech support and they assured me an update would fix issue, did update and have same issue still

I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?

Good day!
Please check this list to see which version of ACR supports the camera:
Camera Raw plug-in | Supported cameras
Then please check your version (Photoshop > About Plug-In > Camera Raw).
As you should see your version is not up to the task.
You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
Regards,
Pfaffenbichler

TS3991 Can not open any of my iCloud saved, TextEdit files

I only occasionally use TextEdit but have been saving my files to iCloud recently. All acesses are between my Mac and iCloud. There are no other devices accessing these files. Yet today, I can not open any of my iCloud files. TextEdit always returns "Document <file> could not be opened". That's it. What can I do?
I am running 10.8.4.

Welcome to the Apple Community.
Possibly a temporary situation, give it a little time before doing anything drastic. Do you use Time Machine or any other back up facility.

PSE Will not open and .psd or .jpeg files

Please help, I have been using PSE 11 with success to edit hundreds of pics. However now all of a sudden it will not open any .psd or .jpeg files. When I go to PSE menu - open a finder window opens up and when I go to choose a file, the open finder window goes disapears and then the menu bar gets faded out so I cannot access any of the menu options in PSE. There are have not been any PSE warnings or messages. I have to use force quit on PSE. I have restarted my computer and even uninstalled and reinstalled PSE 11 and this still did not solve the issue. I am running OSX 10.9 with 16 GB of memory and a 3.06 Intel Core 2 Duo.

That was BRILLIANT how you somehow knew I had the coverflow view open. I tried to close the coverflow first thing but PSE closed down again so I went through the steps again previously suggested .........in my Finder - Library - Preferences - and deleted the follow again: (com.adobe.PhotoshopElements.plist / Adobe Photoshop Elements 11 Paths / Adobe Photoshop Elements 11 Settings) I was then able to close the coverflow view and the combination of tweeks helped. I can now get back to work after three days of headaches trying to solve this puzzle.
THANK YOU!!!

Most current update of Photoshop - will not open any of my previously saved files?

I have the most current update of Photoshop CC, but it will not open any files that I have previously saved. They will not open if i use the Open command or if I try and open them from the folder. I cannot create new files either. Is there something I need to fix to get this to work again? I need this for work.

Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Can not open any files CS5 Win 7 64 bit

I can not open any files in Photoshop. I can open them in Bridge or LR. If I open a file in Camera Raw and try to go to Photoshop, PS opens and just sits there and looks at me as if I opened the program only.

Is this a new installation that has never worked, or is this a problem that has cropped up recently?
In any case, there are two things you can do that between them have a very good chance of getting things working for you.
1. As a diagnostic, click Edit - Preferences - Performance, and uncheck (disable) the [ ] Enable OpenGL Drawing setting, then close and reopen Photoshop. If this corrects the problem, then chances are good that your display driver needs to be updated. To do so, go to the web site of the maker of your video card (e.g., nVidia or ATI) and follow the links to the driver download that matches your hardware and operating system. When you've updated the driver and rebooted your system, re-enable the OpenGL Drawing setting (remembering to close and restart Photoshop) then re-test.
2. Clear all Photoshop preferences to standard defaults. To do this, press and hold the Control, Shift, and Alt keys IMMEDIATELY after cold-starting Photoshop from its shortcut or menu entry. If you're quick enough, it will prompt you. You'll need to go through all the preferences again to ensure any customizations you want are re-done.
Hope this helps!
-Noel

CAN NOT OPEN ANY FILE

CAN NOT OPEN ANY FILE. USE W8 & ADOBE PHOTOSHOP CC 64B

Welcome to the forum.
Can you please provide us with more info, with which to work? This FAQ Entry will tell you what would be useful: http://forums.adobe.com/thread/1042147?tstart=0
Good luck,
Hunt

[Solved] SMplayer/MPlayer crash, exit code: 127, can not open any file

Hi, I read
https://bbs.archlinux.org/viewtopic.php?id=130197
and I have similar problem, after last update to latest version, I can not open any video file, the crash report is here
/usr/bin/mplayer -noquiet -nofs -nomouseinput -sub-fuzziness 1 -identify -slave -vo xv, -ao alsa -nokeepaspect -framedrop -nodr -double -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 31457311 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -ass-styles /home/ja/.config/smplayer/styles.ass -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp ISO-8859-1 -subpos 100 -nocache -osdlevel 0 -vf-add screenshot -slices -channels 2 -af equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 110 /home/ja/Video/Wham! - Last Christmas.mp4
/usr/bin/mplayer: error while loading shared libraries: libwbclient.so.0: cannot open shared object file: No such file or directory
and I have libwbclient-3.6.3-2 installed.
Any help is appreciated.
Last edited by dubria (2012-03-04 13:33:17)

Same problem here... I finally updated whole system yesterday (last full system upgrade was on 2011-11-26) and same problem appears. File /usr/lib/libwbclient.so.0 was not present in system, so i reinstalled package smbclient - without any effect, then reinstalled libwbclient package and requested file appears. There is no error about upgrading libwbclient in pacman.log (from yesterday system update).. How is this possible?

My mouse will not open any files or folders

My mouse will not open any files or folders. I've had to do a hard reboot but nothing changes. The mouse will scroll across the screen but it will not left or right click on anything on my desktop

Hmmm, does the right button also not work?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

Can not open any files with Illustrator CC on windows 8.1

I can not open any files in Illustrator CC. It comes with an error message and shuts down. I run with the Danish version and windows 8.1. - help?!!

I just get this:
"Adobe Illustrator CC has stopped working - One problem was the fault of the program ceased to function properly. Windows close the program and notify you if a solution is found"
not useful..

Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

Hey ilyaz20360341,
Could you please specify how exactly did you transfer Acrobat from one MAC to other.
You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
If you have done the same way, then let me know if you are able to open Acrobat itself.
Do you get any specific error message while opening a PDF?
Hope to get your response.
Regards,
Anubha

Keynote 6.2 foes not open any previous files. Even the one created 1 week ago.

Keynote 6.2 foes not open any previous files. Even the one created 1 week ago.
I have 2 computers and both gives the same bug.
Either Keynote says that the file cannot be opened or it crashes.
What can I do?

Check you are using the correct version of Keynote to open the files; right click the file and select Open With > Keynote 6.2.

Photoshop not opening any of my video files. Help!

Similar Messages

Maybe you are looking for