Photoshop Not Seen By Encore?

When trying to edit a menu from Encore in Photoshop (by clicking the PS icon)I get an error message saying "Could not edit in photoshop. Photoshop does not appear to be installed".
Photoshop is actually open!
Is this a bad install and a re-installation is necessary or is it fixable?
Thanks

First I would check to see what software my system was using to automatically open .psd files. Sometimes when you install other programs they claim the right to open these files. Close down all open software. Go to Windows Explorer, find a .psd file, right click on it and choose properties, under type of file choose Change and then choose Photoshop to open the file and tick the box that says use all the time. Click okay. Hopefully that will prevent you from having to re-install anything. Peace, BJ

Similar Messages

  • Saving photos in photoshop, not seen in LR

    When I export a photo into photoshop and make my changes, as I save as a tif, it isnt automatically updated in lightroom, so I constantly have to sync the folder.
    My previous versions of LR (before 5), this would update automatically and as I would return to LR, the new file would be there.
    How can I change this?

    When exporting, check "Add to this catalog".
    But perhaps it would be wiser not to export but to "Edit in Photoshop"?

  • Pioneer BDR-202 not seen by encore CS3

    Recently installed afore mentioned drive, using xp I found it would not see pre any blue ray discs, found that UDF 2.5 files were needed, done that.
    I have anydvd & powerdvd 8 ultra so can playback discs i can also right click and see files on disc after installing UDF files.
    What i cant do is make a blue ray project as encore cant see the drive. a have installed latest firmware and encore is the latest, when i pick blue ray as output in encore it sees no drives, if i pick dvd as output it sees both drives???????????????????????
    Please help someone my first blue ray deadline is looming up fast
    Darren

    Windows XP does not support Blu-ray natively. In fixing that problem, I suspect that either anydvd or powerdvd may have installed bits that are causing your problem with Encore.
    To meet your deadline, create a Blu-ray image in Encore, and then burn it using ImgBurn:
    http://www.imgburn.com/
    Then, when you have time - try to troubleshoot your system to find out why Encore doesn't see the Blu-ray drive correctly.

  • Back up photos of photoshop not seen in revel

    Where did my photos from Photoshop.com go? My Revel page is empty. I was never notified of the move.
    Kindly help me ASAP

    If you live in the US and opted out of migration or if you live outside the US and did not opt in, then your files were not migrated to Revel. You have 97 files that were in Photoshop.com storage, which has now closed. If you did not archive them, please try this today or tomorrow before your files are deleted. You can then login to Revel on a browser at adoberevel.com or download the app for Mac, iphone, and ipad and upload the photos there.
    FAQ: How do I add (upload) files to Revel?
    http://forums.adobe.com/thread/1162795?tstart=0
    Thanks,
    Pattie
    To Archive files from Photoshop.com
    1) Download and install Adobe AIR from here:
        http://get.adobe.com/air/
    2) Download the Media Downloader from here and then install it and run it:
        http://static.photoshop.com/express-tools/organizer/20130529172831/downloader/Downloader.a ir

  • My pictures folder for iphoto is not seen anywhere..

    my pictures are not seen anywhere on my computer. it seems to be missing in a folder or the folder was deleted i am not too sure. when i go to my name computer and go to pictures the only option is the iphoto recovered photos library and not the iphoto library itself. i hope not to have to redownload this since i have over 5,000 photos in my library. hope you can help

    This one's more up to date - and pretty pictures too...
    With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto. With 10.5 you can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Regards
    TD

  • Ipod not seen by windows or itunes

    Hello, I'm totally frustrated and have been searching for hours. Please someone help.
    - Nano 8 gb
    - Windows xp
    Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
    When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
    Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
    I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
    I'm completely frustrated, please can someone help me.

    I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
    What I did was:
    1. Uninstall i tunes
    2. Restart my computer
    3. pluged my ipod in a slow usb line
    4. waited until my pc recognized it in there. It took a little while.
    5. re installed i tunes from apple.com
    6. waited until i tunes recognized my ipod
    7. updated my i pod with my library it took a long time because i was in the slow usb plug.
    8. re plugged my ipod into a 2.0 usb line
    9. i tunes recognized it.
    10. I then updated my ipod to the new 1.2 version
    11. The problem started happening again
    12 I repeated what I did before and now it is working.
    It was very frustrating! I hope it works for you.1

  • 5th Gen IPOD - Won't Sync and Not Seen by Windows

    Help!!!
    Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
    Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • IPod touch: Seen by XP, not seen on OSX.

    Strange one.
    1st Gen ipod Touch with latest software(think its 3.3), latest version of itunes.
    Its seen and works perfect with Windows XP.
    I plug it into my Mac Book Pro, running Lion and its not seen. nothing happens wihen i plug it in.
    I have reset, restored and wiped the ipod from the device itself and its still not seen.
    I also tried it on a Win 7 machine and its NOT seen either.
    Is this something crazy to do with 32bit architecture. Its seen on Win XP which is 32 but not by  64bit Lion and Win 7.
    Any suggestions?

    Have a Look Here
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591

  • Why will photoshop not download on my mac

    why will photoshop not download on mac

    Hi theuyuseewalkingdownthes,
    Do you get any error message while downloading.
    Regards,
    Romit Sinha

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • Attachments and history of my emails are not seen by Windows users

    attachments and history of my emails are not seen by Windows users

    Just guessing at what you mean, try this:
    In Mail, while composing a message, go to Mail's menu and click:
    Edit > Attachments > Always send Windows-friendly attachments

  • In my iPad mini some apps are not seen (voice recorder, calculator, compass etc)

    in my iPad mini some apps are not seen (voice recorder, calculator, compass etc)er

    Those apps aren't included in iOS on iPads
    iPad Mini built-in apps : http://www.apple.com/ipad-mini/built-in-apps/
    iPad manual (which has a chapter on each of the built-in apps) : http://support.apple.com/manuals/ipad/

  • Data of measure is not seen in  webi report when drill is disabled

    Hi
    i have created a hierarchy in universe on which i drill down in webi reports
    the problem is that  i have drilled my report till the last level and saved it
    the object  on which im drilling  is set as a section in the report
    so i have added a measure in the table under that section
    now the measure has different value at different level of drillings
    i.e for the last level of the drill i use one measure and after that as i drill up i use different  measure
    for all other level of drilling
    every thing is working fine but the problem  is
    when i open report in view mode
    the measure data is not seen
    only when i enable drill the measure data is seen
    i have done something like thi
    i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

    Seems like DrillFilters needs the drillmode to work fine..
    why don't save the report with the drill button enabled?

  • After upgrading to Mountain lion the hyperlink button is not seen in Preview.  Anyone knows ho to get it back?

    After upgrading to Mountain lion the hyperlink button is not seen in Preview.  Anyone knows ho to get it back?

    Augend wrote:
    After upgrading to Mountain lion the hyperlink button is not seen in Preview.  Anyone knows ho to get it back?
    There have been a few threads about this.  The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
    I've filed a bug report on it.
    Matt

  • The salesperson for my iphone 4 said on Christmas morning we could go to our online account, select my number, select to change my SIM card, and enter the ICCID number so that I'd be able to use my iphone 4 today. I have not seen any such steps. Help?

    The salesperson for my iphone 4 said on Christmas morning we could go to our online account, select my number, select to change my SIM card, and enter the ICCID number so that I'd be able to use my iphone 4 today instead of my old phone (not an iphone). I have not seen any such steps. Help?

    I suspect the salesperson that told you that meant your online account with your carrier...have you tried logging into your carrier account online? To do this will require the sim number on your sim card, as well as the phone's IMEI number...you get the sim number off the sim card & the IMEI number, for the phone, is printed on the box.

Maybe you are looking for