Photoshop now won't recognize dxo files!

Well, I fixed the Bridge problem (not showing RAW thumbnails), now, when I try to open a DXO file from Bridgem Photoshop doesn't recognize the file type. Any suggestions besides reinstalling my entire system?

See this.
What to do if iTunes displays a corrupt file message.
And this thread.
Da Gopha's corrupt file info.

Similar Messages

  • IPod full but now won't recognize any files; how to fix without "restore"?

    My iPod mini suddenly won't recognize any of my files or extensive playlists. I just uploaded several songs to it, and when I disconnected and tried to play it, it suddenly showed as completely empty, like I'd deleted everything. I plugged it back in, and while nothing shows up in iTunes with - no songs, no playlists - it says it's still nearly full.
    Reading another thread, I found the files on the iPod through My Computer. So they are still there, but for whatever reason the iPod, literally suddenly, can't recognize them as present. How do I fic this WITHOUT having to restore the iPod and then re-add those files (and recreate all of my playlists?)
    Please, please help!

    See this.
    What to do if iTunes displays a corrupt file message.
    And this thread.
    Da Gopha's corrupt file info.

  • Photoshop CS5 won't open .kmz files

    Photoshop CS5 won't open .kmz files. I did a fresh install of Google Earth, opened it, saved a place, and saved a .kmz file. It reopens fine in Google Earth.
    When I try to open it in Photoshop, this message pops up:
    File Format Error
    This file is from a previous version of Google Earth or it is not a Google Earth file
    I get this message regardless of the following:
    - ps is closed and i right click the kmz and choose ps (rather than google earth) to open it
    - ps is open and i double click the kmz
    - ps is open and i choose file/open and select the kmz
    - ps is open and i have created and saved a new psd file, then choose 3D/New Layer from 3D File/ and select the kmz
    I have tried the usual remedies, change rwx permissions, repair permissions, delete prefs. No luck.
    Any thoughts? Software versions are below.
    Thanks.
    - Photoshop CS5 Extended 12.0.4 x64 (doesn't work in x32 either)
    - Google Earth 6.0.3.2197
    - OS 10.6.8

    I was trying to see (since Photoshop Extended touts the ability to open kmz files) if I could open a 3D Google Earth file and edit it in Photoshop. A file like this for instance http://ecotope.org/anthromes/maps/. After more research I've learned that kmz is nothing more that a container format - you can change the extension to zip and see what's in it.
    I ran across this tidbit in the Photoshop CS3 Extended forum:
    Photoshop CS3 Extended supports the ability to import .kmz files created from Google Earth 4 or exported from Sketch-up in the Google Earth 4 format. Photoshop CS3 Extended cannot open Google Earth files. If you have a Google Earth file, you can convert it to a Google Earth 4 format with the free version of Sketch-up.
    So, theoretically if I could get a kmz into Google Earth 4 format, I could open it in Photoshop. But I haven't had any success importing a kmz or kml into SketchUp. Even just making a native sketchup file and trying to import that in psd gives a ram error.
    Probably I'm wishing for the moon.

  • Lightroom (4.3) won't recognize the file type while importing from Canon 5d Mark iii

    Anyone mind helping me trouble shoot why my Lightroom (4.3) won't recognize the file type of my Canon 5D Mark iii ?
    I have seen this in a couple other threads but none of those suggestions worked for me. I am also a Mac user.

    Bomal9 wrote:
    I have Lightroom 4.3 and a Mark iii and cannot import raw files into Lightroom.
    The above contradicts with this:
    Bomal9 wrote:
    I am downloading images through the Canon EOS Utility manager and have to import the photos in a folder into Lightroom.
    So my reading of that is that you ARE importing Raw files from the 5D3 into Lightroom, but having to use a roundabout route to do so. Is that correct? If so, how are you trying to import when you "cannot import raw files into Lightroom", are you using a card reader or direct camera attachment? Have you tried both methods? And what happens when you do try?

  • How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

    How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

    1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
    2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
    And if that "public" computer was set up properly, Sync should have been disabled.

  • Yosemite upgrade - Bluetooth now won't recognize LG Tone

    Yosemite upgrade - Bluetooth now won't recognize LG Tone, won't appear on discover list, what now...?

    What are you trying to do?
    Barry

  • I bought a new time capsule.  When I try to set it up, at the end, it says an expected error occurred.  It now won't recognize my time capsule.  What do I do?

    I bought a new time capsule.  When I try to set it up, at the end, it says an expected error occurred.  It now won't recognize my time capsule.  What do I do?

    Do not setup a TC over wireless.. it is like sitting on the branch you are sawing off.
    Plug it into the computer by ethernet.. press and hold the reset until the front LED flashes rapidly and start over.

  • Itunes library too large and won't recognize all files, just new ones but

    still shows the old ones and their location in the library. I was keeping the library on the 2TB external drive. It got too large. Now I want to put the music on one of the 1TB drives and just the videos on the 2TB drive. From my PC, I can watch everything.
    I cannot download to an iPod or iTouch anything from the 2TB drive. When I hit max capacity, I temporarily started saving on one of my internal 2TB drives (space wh*re, I know)before I hit on what my solution would be, and now I can only download from that location. Why?
    What can I do? I even tried switching the library location back, and it won't recognize anything. I'm screwed, and I have all this material... YEARS of collecting...
    Someone please help me...

    To clarify, currently on the 2TB external drive are music and videos. I want to split them up and hopefully save some space - and maybe foresee problems in the future when I hit max capacity on the 1TB external, and think about a 4GB (not the best option I see at this time) or another 2 2TB drives.
    Doesn't the Library file just save locations when iTunes closes down so everything should be OK? I mean, the prog can recognize everything, it just won't download to anything, even if I move from the external drive an older movie to the new drive, it refuses to "see" the movie so I can download it.

  • IMovie won't recognize certain 'File extensions' ??

    Hi,
    can anyone help here. I use Handbrake to compress Movie files before I use Quicktime to 'export to web' option, then import to iMovie to then edit before submitting ti iTunes ( keeps the size down but still have good quality ). Anyway even though the files from Handbrake have either a .mov or .m4v extension iMovie won't recognize them, but if I then use QT export to web ( which in turn makes a folder with the new files inside ) which have the .m4v, iMovie will see it !!
    Any ideas please.
    The compressed file under Handbrake is small but good quality ( 2.3Gb down to 178Mb ) but if I use QT it then becomes even bigger ( 539Mb ) !!!!!
    Steve

    I'm new to Handbrake so could you tell me what do you mean by 'Don't include extraneous data tracks' ?
    Most people use HandBrake to convert DVD content (usually multiplexed M2V video and AC3 audio) to iPhone, iPod, TV, iTunes/Front Row files for viewing and/or iMovie '08 compatible files for editing. Since DVD content usually contains chapter data and the default setting for Apple device presets like TV normally default to include the chapter track data and (in older versions) may default to include an extra AC3 "passthrough" audio track, the output from such conversions are not supported by iMovie '08. If this is true, then re-exporting the content as you described would remove the extraneous data and explain why the files are incompatible with iMovie '08 before export and compatible after.
    However, you have not confirmed that the incoming files are, in fact, stored on DVDs or indicated which specific settings are being used for your HandBrake conversions. iMovie '08 is only "edit" compatible with files containing DV, AIC, Motion-JPEG, Photo-JPEG, and certain profiles of MPEG-4 or H,264 video compressed data. So there is always a secondary possibility here that you are selecting an incompatible form of output form HandBrake and then using the "Export for Web" option to accidentally convert the incompatible compression format to a compatible one since this option exports to H.264/AAC by default.
    If you have a much better way of doing this I am all ears especially if it makes my life easier, I am on a steep learning curve here ( sending video podcasts to iTunes but in good quality ).
    The normal approach would be to select the iPod preset within HandBrake (or within QT Pro, GarageBand, MPEG Streamclip, etc. if the source file is QT compatible) and convert directly to an iMovie '08 compatible file. The iPod preset would create a file equivalent to the "Desktop" (1500 Kbps) file created by the "Export for Web..." option but, as previously mentioned may contain a "chapter" track if you fail to turn it off. If you want a smaller output file, then all you have to do is reduce the target data rate in HandBrake. If you are currently editing the equivalent of the iPhone file (900 Kbps) using your current work flow, then reduce the target average bit rate to 900 or 1000 Kbps before exporting from HandBrake. Basically, this approach is faster since you do not have to export the data twice. On the other hand, it is a bit more complicated since you have to manually ensure any extraneous data tracks are de-selected and that the correct compressing preset/settings are selected.

  • Quicktime won't recognize MOV files?

    QT won't open MOV files, and gives a -2048 error that says it is not a file it recognizes. I know other people who are able to open the same files fine on their Mac computers, so I don't think it's a problem with the file...

    The -2048 error message usually means the file is MPEG-2 format.
    QuickTime can't view MPEG-2 without additional software ($20).

  • I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

    I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

    Transferring programs does not work well with Adobe applications.  You should install them.
    As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

  • Rescue and Recovery won't recognize backup files.

    I have backup files on a usb drive, an ultrabay drive and the main hard drive and it won't recognize any of them. Anyone else have this problem? 
    -M 

    manusoft, welcome to the forum,
    attach the usb drive and then check it's recognised in BIOS. While you're in BIOS ensure that you optical drive is set as first boot device and place the boot disc you created in the optical drive. Save your settings and restart.
    The system will boot to the R&R on the disc and in theory you should be able to then install the image.
    Consideration; on the systems you move this image to the service partions will probably be no longer functional. I say probably as I've never done this with W7.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • ITunes Suddenly Won't Recognize Music Files

    I have synced my iPod with my Toshiba laptop more times than I can count. When I opened iTunes this morning, iTunes did not show any of my music/podcasts, etc. After a moment of panic, I realized that everything was still on my computer and in my iPod, but it is as if this was a brand new version of iTunes. iTunes also "sses" my iPod, but will not let me change anything. I seem to recall accepting an automatic upgrade of iTunes recently (is this what I get for not using Safari?) but I think I have used iTunes since then. What gives? Do I need to reconstruct my library in iTunes? If so, will I lose my Playlists? Did the upgrade cause this problem?
    Message was edited by: ChefDad

    yes i can play them with other players. i've tried 6.0.1 still the same problem. i had cleared my library, files kept of course, and just added my music folder to the library. they were all there before. i think it won't recognize cds that i've imported using musicmatch and itunes in the past. does anyone know why? thanks

  • First backup wired now won't recognize

    Hello,
    I did my first back up (Time Machine) with TC, si it would be faster as recommended,
    now wireless won't recognize TC as a disk for Time Machine
    ??

    I had the same reaction. I fussed and looked and fussed some more then the backup/TC was recognized.
    This machine/setup/procedure is Very confusing and/or faulty.

  • Dreamweaver won't recognize some file extensions

    I recently switched from using Dreamweaver CS6 on a PC to using it on a Mac. The problem is some of the files I need to work with end in .yaml but Dreamweaver won't let me open those files. I read I need to add the extension to the Extensions.txt file located in Dreamweaver CS6 > Configuration. However, while I've added "YAML," to the beginning of the section ending in "...:All Documents", added a "YAML: Djando Files" line to the file, saved the .txt file, and quit and restarted Dreamweaver, it still won't recognize the extension.
    Thoughts?
    Chris

    Did you add it to the "Open in Code View" section in preferences?
    Change, add recognized file extensions | Dreamweaver

Maybe you are looking for