Photoshop only letting me edit jpg images, Why?

Photoshop is only letting me adjust and modify jpg images not any other file type.
Why is this?

And based on the scarcity of information you provide you might want to give this a glance:
How To Get Help Quickly!

Similar Messages

After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

thankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

How do I edit photos on my pdf? it only lets me edit the text

how do I edit photos on my pdf? it only lets me edit the text

Hi Caryn,
Actually Creative Cloud is not my speciality - but I would recommend posting your specific questions to that forum:
http://forums.adobe.com/community/creative_cloud
I'm sure our community members would have a better idea if it is right for your project!
Kind regards, Stacy

IPod Nano won't open .jpg images Why?

iPod Nano (Importing Photos)
Version: 1.1.3
Model: iPod MA477C
Format: Windows (Should this be "Mac" if I am on a mac? And how would I change this?
I can't seem to import an .jpg image into my iPod Nano. I have iTunes open and my Nano connected. I selected the "Photo'" tab and then selected "Sync photos from: "Choose folder" I then browse to a folder where the .jpg image resides but the image is greyed out. What's up.
I created the image in Photoshop and the exported it as a low res ,jpg image so shouldn't this work?
Thanks

This happened to me when using iTunes 6. Is that the version you are using? I was never able to find a complete answer to the "Preferences not saved" error or any knowledge base articles with an official explanation. I did however find a workaround in a previous discussion. Connect your iPod and in the short time that it is still visible on the desktop just as iTunes is opening, go to Preferences>iPod and tick "enable disk use". You have to be quick but it can be done. Once it is enabled you will be able to go back and update the preferences such as manual update etc. and and you'll not get the error.
If you are using iTunes 7 try the same technique only tick "enable disk use" in the Summary tab before your iPod unmounts.

Spry navigation bar covers flash movie beneath it but not the jpg image, why?

i have a spry navigation bar with a flash movie underneath,
and when i hover over the navbar and the submenu pops down it
covers the flash movie, but it doesn't cover the .jpg image that is
next to the flash movie. how can i fix this? thanks.

thanks for the reply Murray, a responder from the flash forum
gave me the following answer and it worked perfect.>>
The <object> and/or <embed> HTML elements that
reference your Flash content accept a number of optional
parameters. For the <object> element, these parameters are
supplied via nested <param> elements. Simply add the
following new <param>:
<param name="wmode" value="opaque">
The <embed> parameters are supplied via attributes. For
the <embed> element, add the following new attribute:
wmode="opaque"
That’s it. Your Flash content is now stackable via
z-index; for example, you may wrap your
<object>/<embed> pair in a <div> and set the
<div>’s z-index as you please.
<div style="position: absolute; z-index=1;">
<object attributes >
<embed attributes />
</object>
</div>
If you’re using Dreamweaver, just press the Parameters
button in the Insert > Media > Flash dialog or in the
Property inspector when selecting existing Flash content. Type
“wmode” (without quotes) in the name/parameter column
and “opaque” (without quotes) in the value column. That
will handle the above HTML for you, even with the new JavaScript
embedding available since the 8.0.2 update.

Motion only lets you edit 300 frames?

So, I'm new to Motion (done a lot with final cut but just barely got FCS2 so I'm trying to learn the rest of it). I've noticed that you can only have up to 300 frames of space to work with. So I'm wondering why that is? Is it a limitation imposed by my hardware/software?
I'm guessing that it's so you create several objects instead of a huge stream of things...But let's say I want to make opening credits for a film and need way more than 300 frames. Do I need to create an object for each credit and then...What do I do after that?
If you need more specifics please let me know and I'll be happy to answer them.
EDIT: Okay so putting a clip let's you do more than 300 frames. But if I choose a template it doesn't. Just to clarify.
Message was edited by: marshzd

Have you seen this thread?

CS3 Photoshop stroke not functioning on one image, Why?

I'm running the CS3 design premium suite on a Mac Pro 8 core with 14 gig of ram & 3 TB of hard drives with Snow Leopard 10.6.7. Been using Photoshop 7 for about 5 years and never had this problem on that.
I'm making an image in Photoshop CS3 to use as a logo on a website I'm building and all went well until I tried to put put a red stroke (1pxl) on 2 words of text. For some reason that I don't yet comprehend, the stroke is not taking. I tried opening a new window and all works well there, text & stroke wise. I have saved my work & shut down the computer a couple of times just in case there's something odd with the logo file.
As I said earlier, I've never experienced this before in Photoshop 7. I did a search on the forum here & read the FAQ's where I got the impression there were a few other people who had a similar problem. All the work has been done in Photoshop and it blows my mind that I can't reproduce it on new files (tried for the last 2 hours). There's got to be some little gotcha that I'm not aware of that's messing me up. The file itself is a little over 100K so It can't be an out of memory error (I think).
ANY help would be appreciated!!!!!
Ken

I'm not sure what I did this morning to undo the problem, but I finally achieved the desired result as follows:
I was following a tutorial on how to superimpose "fire" on an image and in getting to that point there were many duplicate layers with changes to blending layers, etc. I went back and turned every layer effect on & off to see what would change on the image. When I found that certain effects were not making a difference (even though they were enabled), I discarded them to get to the "relatively" clean layer panel in the screen shot.
There were certain effects in the tutorial that played with lighting on skin which were not needed for my purposes. I'll try it again when I'm trying to put fire on human skin, like in a wizard throwing a fireball (the actual tutorial).
It's unfortunate that I wasn't able to track down the precise culpret that prevented the layer stroke for the text, but if you have ny thoughts by all means let me know.
Thanks,
Ken

Photoshop 7.0 and editing Raw images

I'm new to dslr's and would like to snap raw images. I have ps 7.0 and have never used the open as nor do I know if this application will edit and work with Raw images. if anyone can help me I sure would appreciate it.
thanks,
EriK

Erik,
You can also check out www.officedepot.com as they still sell CS3 upgrade for 198 bucks. It is a legal copy too. They no longer sell it in their stores so you have to buy it on line. Then if you want buy CS4 upgrade later on. Save you 299 bucks total.

I can receive emails contaning 5++ attachments (mainly photos) but Firefox will only let me forward 5. Why? How do I change that ?

I will receive an email that contains 8 to 12 photos and when I attempt to forward that same email, nice red ink says "you can only forward 5 attachments. Please remove some". Yet I can forward videos with no limits. Happens every time.

Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

Why won't my edited RAW images show after a LR re-install onto a new Hard Drive?

Hi there. Recently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed, thankfully. Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. Please tell me that all of my last 2 years of editing photos are still with the RAW files?!!!
I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6.
I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
Please be kind in your replies...I appreciate any help/guidance I can get on this. Plus the photos I need are for Seniors graduating in a few months here so you can imagine the panic mode is just a bit higher than normal. Many thanks.

The default location for the backups created by Lightroom on exit is in the same folder as the catalog itself (i.e. that would be on the same faulty drive). It is, however, possible to redirect those backups to a different destination, such as a different hard drive.....but only you know if you did that or not. Do you have any other backups, e.g. drive level backups?
Just to be clear, if you are importing afresh into a new catalog from Raw files that do have XMP sidecar files, you should see the final edited state from the previous catalog, but you won't see the individual history steps that got you there (as that's one of the things that are not included when you write XMP data from within Lightroom). If there is no XMP sidecar, you'll just get the original OOC image.

Problem printing JPG images in Safari 5.0.1

Hi!
I have an application that prints an html with some information and some images.
The problem is that when I print it, some of the images in the html are not in the print area, they appear as if they were white images. This is happening only with jpeg (or jpg) images. With PNG files I'm not having this issue.
I'm using Safari 5.0.1 in Windows 2008.
Is it a bug in that version for Windows? As I've tried this in a Mac and it prints the jpeg images correctly.
Thanks in advance.

I can use Google street view on v10.5.8 Safari 5 also.
If you want to revert to Safari 4.0.5, go here for instructions.
http://appletoolbox.com/2010/06/downgrade-from-safari-5-0-to-safari-4-0-5/
(I'm obsessive about 'cleaning' my Macbook!)
You may have inadvertently "cleaned" out necessary system files.
How are you doing this cleaning?

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable.

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!

I have an Edit In - Photoshop option, but not an Export - Photoshop option.
Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected. I assume this is not the problem, and that the photo is selected.
Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset.

Help why won't photoshop let me edit my photos anymore?

Why won't photoshop let me edit my photos I am a photographer and my photos need more editing but photoshop will open the tools but nothing happens with any of the tools!

Too little information …
Could you please post a screenshot with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Why is Photoshop CS6 not an option for editing iPhoto image?

I've read everywhere that to edit iPhoto pictures in Photoshop CS6, I need to select it as the application to used to edit the image. However, I don't have that as an option, only Preview. And yes, I do have Photoshop installed, I use it every day. Any ideas on how to get it to where Photoshop is the visual editor? Frustrating. Thanks.

You already have selected preview as your external editor - to change it select it again and then select the new external editor
LN

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

Photoshop only letting me edit jpg images, Why?

Similar Messages

Maybe you are looking for