Photoshop Opens new blank files abnormally slow...

Hay there, I got a couple issues I could use some advice on if any one happens to recognize the issues.
I've got a fresh cs6 install completely updated on a brand new PC with a fresh windows 8, barely even had the thing for 2 days yet.
CS6 opens just fine but when I go to open a new file it freezes up for like 5 minutes before eventually opening the file... after that it runs smoothly.
Then I've got a potentially unrelated issue were the system wont allow me to run some of my brush tool presets that I purchased recently... they worked fine on my old machine but on this new install I keep getting the error...
Could not load the tool presets because the file is not compatible with this version of Photoshop.
I even attempted to purchase the brushes again to see if they were updated in some way.
Please tell me if you need more info to go one.

Similar Messages

Photoshop Elements 12 - preset for new blank file

I am using a trial of Photoshop Elements 12 and I would like to know how to make a preset for a new blank file so I don't have to keep loading that information into the program.
Thank you.

First make sure pse 12 is not running before doing the below steps.
Also, in windows 8.1, you need to have the Hidden Files and folders shown
http://www.ricksdailytips.com/view-hidden-files-and-folders-windows-8-1/
Go to
C:\Users\User Name\AppData\Roaming\Adobe\Photoshop Elements\12.0\Editor
and open the New Documents Sizes.psp in Notepad
Then after whatever number is actually in the file (two in my example)
paste this line and then File>Save
"785 px X 250 px" 785.00 250.00 px 72.00 dpi RGB 8 1.00 white "sRGB IEC61966-2.1"
Then start the pse 12 editor and the preset should show on the preset list in the new document dialog

Can not open new blank tab window from file, new tab.In Tools/Options/Tabs ticked open new windo w in new tab?

Can not open new blank tab window from file, new tab.In Tools/Options/Tabs I have ticked open new window in new tab?

The Ask Toolbar is probably causing that in the Firefox 3.6.13 version. Disable that extension or un-install it.

My new blank file is suddenly gray and paint bucket no longer works correctly.

Photoshop Elements 10. I started a new blank file, which opened white, as usual. I enclosed the file with the rectangular marquee tool, and used the paint bucket to fill the background with a brownish color I choose, except it filled with gray. I looked to be sure the color mode was RBG color, and it is. After a frustrating couple of attempts to change the color, I thought of a work around and just created a new layer and colored it, but, when I tried to change the color again, the paint bucket would not respond, so I created another layer and the paint bucket then changed the color for me again. However, I really would prefer it work the way it did before, instead of creating unnecessary layers to do the job. I insert a screen shot, if it helps. Any help resolving this would be appreciated.

I clicked on the arrow and reset the tool. I also reset the transparency setting in preferences, which was the only color related setting I saw there, to no avail. I opened another new file, same result, dumping the paint bucket produced only a grayscale color. Thanks for the suggestion, however.

Why does Photoshop open new pictures to 72dpi?

Why does Photoshop open new pictures to 72dpi? It seems to be done by default...

It's not clear what you mean by "open new pictures".
You can open existing pictures, in which case Photoshop reads and displays the image file's original resolution (in ppi).
Or you can start a new image by choosing File > New... in which case Photoshop will populate the fields of the New dialog with dimensions and resolution most recently entered, OR with the dimensions and resolution of image data on the OS clipboard.

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

Why can't I open new PDF files into iBooks

I cannot open new PDF files in iBooks, they flash really quick in PDF folder then disappear. I'm really frustrated

I am running Safari Version 5.1.5 (6534.55.3) on my iMac 10,1. After my last Adobe update, my pdf files are nothing but a black window. Have tried reverting to an earlier version of Adobe, but still getting a black window. What next steps should I take? Thanks.

Change Default for Open New Template File In Adobe Illustrator

How can I change the default folder when trying to "Open From Template".
When I use the open from template it defaults to the template folder in the program folders.
I want to change the default folder to a different location.
Adobe Illustrator CS3 13.0.2

Here's how to have your templates available in the "File New From Template" in Adobe Illustrator for Windows.
What you need to have
Administrator access to your machine.
What you need to know
The default directory for Adobe Illustrator templates is here (for CS5.1)
C:\Program Files (x86)\Adobe\Adobe Illustrator CS5.1\Cool Extras\en_US\Templates
The default Windows security doesn't allow shortcuts to be created directly under that directory.
You can, however, create the shortcut indirectly!
What you need to do
In Summary
Create one (or multiple) folder shortcut(s) in the default Illustrator template directory.
In Detail
Open Illustrator
Select File -> New From Template
Drop down the "Look in" drop-down, note the directory:C:\Program Files (x86)\Adobe\Adobe Illustrator CS5.1\Cool Extras\en_US\Templates
Open a Windows Explorer, and navigate to that directory
Open another Windows Explorer, and navigate to the directory where you keep your templates.
Right-click-drag your folder from the second Explorer (your directory) to the first Explorer (default templates) and drop.
Select "Create shortcut" from the right-click popup menu that appears when you "drop" (release the mouse button).
Windows will display a message "Shortcut cannot be created here, do you want to create it on the desktop".
Select Yes.
Move the directory shortcut to the Illustrator to the first Explorer (default templates directory)
Windows will ask for Administrator permissions.
Select Yes.
You can right-click on the template shortcut and rename it without the " - Shortcut" suffix; you'll have to grant Administrator permissions for that as well.
After completing these steps, your template shortcut will appear properly and you can select it. Happy designing!

Photoshop Opens 8bit TIFF files as Camera Raw

My normal workflow consists of opening RAW files in ACR, making adjustments, then moving on to Photoshop where I apply retouching and build clipping paths. I then save the file as an 8bit TIFF. I rarely reopen these 8bit TIFFs again, but when I did so recently what I encountered was not what I expected.
My Photoshop (CS6) is opening 8bit TIFF files as Camera Raw when selected by "right click" followed by "Open with Photoshop CS6". I remember being able to open 8bit TIFF files directly in Photoshop, but I think this change has occurred since installing CS6.
Again, files in question began as 16bit Raw files, but were worked on in Photoshop CS6 (retouching) and saved with clipping paths. This would reduce them to 8bit files. When placed in page layout, clipping paths work properly, confirming that paths are intact.
When I want to open the files again - say from Bridge or a Finder window - by the method "right click - Open with Photoshop CS6", the file is opened first in Camera Raw, and then in Photoshop, and the path(s) is missing.
I can open these TIFF files and access Paths but only if I locate and select the file from within Photoshop (File/ Open.../). The Open window gives "Format" as Camera Raw (which it isn't, having been saved as 8bit file). If I override format to "TIFF", the file opens with clipping path shown.
What might be going on here and how can I correct it?

DaleH wrote:
I set the preference to automatically open JPEGs and TIFFs with settings.
That's the reason for Adobe Camera Raw being automatically used to open TIFFs which were previously sent from ACR to Photoshop. The TIFFs have ACR settings because they originated as images generated from raw files by ACR. If you don't want ACR to be invoked when opening such files by a right-click then set the preference to "Disable TIFF support".
DaleH wrote:
I didn't manually set the bit depth.
When I saved the file with a clipping path it automatically dropped down to 8bit.
That's not happening here with CS6. 16 bits per channel are maintained when saving TIFF from Ps, regardless of there being a clipping path. Are you certain that the ACR workflow options definitely said 16-bit, as shown below, when ACR initially generated the images from raw and passed them to Ps?

Today Photoshop opens my jpeg files as a black screen. What is going on?

Today for the first time, photoshop opens all my jpeg photos as a black screen. Does anyone know what is going on?

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Opening new excel file from available Template-Urgent

Hi Friends,
I have the functionality like this. I have one excel template. In that i am getting two text files(header and row values) and filling it on the excel file. After that i am doing operation on it. These things i have succeded already. The problem is i am opening the excel file like this
Process pro = Runtime.getRuntime().exec(strExcelPath+" "+"..\\std\\app\\client\\resource\\SkillReport.xlt");
when i am opening like this it is opening the tempalte for editing in stead of getting new instance from it. Can any one help me to get a new instance in stead of opening the template itself.

Thanks guys. I've found another way of doing the same.

Why does caps lock on every time I open new blank page

Every time I open a new blank page, the Capitalization switches on. It doesnt happen with the other pages I choose. Just the blank document page. This annoying habit continues as I start a new line, and sometimes the underline and Bold format pops on also. I have to keep going into the format header and keep switching them off. After a lot of experimenting, I believe this malfunction is what is screwing up my uploads to the web, by messing with the script. Has anyone encountered this problem or know how to fix it? It only happens with the darkroom template blank page which is the one that my site is built with. I've tried clearing the cache, rebooting ect.
Message was edited by: kelly12
Message was edited by: kelly12

The first two text boxes in the Darkroom page are all caps. But any new text box will be both upper and lower case. It's designed that way. If you want to use lower case then delete those boxes and add new ones in their place.
You can try reinstalling iWeb but I don't think it will help. I'm on a new iMac and that's how the Darkroom theme works on all the pages. The top text box and the next one down.
OT

Can Photoshop open large TIFF files?

Hi,
Windows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
Thanks,

The scanned files come from a big Roche cells scanner. Computers which have the Roche utility software can open it and those computer are in 32-bit or 64bit. I have even downloaded a TIFF image, from the nasa site, of 25GB and i could open it on my 32bit Windows OS.
After doing some research, I found the following site http://www.remotesensing.org/libtiff/document.html . From there, I went to the following site : http://www.awaresystems.be/imaging/tiff/tifftags/extension.html and it seems that some tags within the tiff files are not recognized by some viewers.
I also installed Microsoft KB2635500 http://support.microsoft.com/kb/2635500, which solves issues when we try to display a large TIFF file that contains multiple pages, althought this is not the case as we speak of a single file. I also should have tried before installing this KB.
The tiff file (9GB) the user obtained when scanning with a Roche cell scanner is a TIFF file extension. The file I downloaded from the NASA website is also a TIFF file (25GB). I have a 32-bit OS and I could open the NASA tiff file without any problem but another user with a 32-bit OS cannot open any tiff file bigger than 4GB. That user gets the error message stating the file is corrupted or not supported.
I will check later on in the morning when this user arrives.

When I try to copy text, Ctrl+c opens new blank Firefox tab instead... how can I fix this?

I would like to use Ctrl+C to copy text from web pages rather than open blank tabs.
Right-click > Copy still works to copy. Ctrl+T still works to open new tabs (with my selected homepage, as per the My Homepage plugin).

Further testing reveals: the problem is NOT Integrated Gmail.
All my other add-ons are ones I've known and used for a while:
Adblock Plus 1.3.9
Download Statusbar 0.9.8
Java Console 6.0.18, 6.0.21, 6.0.22, 6.0.24, 6.0.26
Java Quick Starter 1.0
LastPass 1.74.0
NoScript 2.1.2.1rc1
PDF Download 3.0.0.2
except My Homepage 1.0, which is new to me.
Turned My Homepage 1.0 off, and the Ctrl+c, Ctrl+v problem is gone.
Thank you again to everyone that helped. :)

Opening new excel file by righ click produce worksheet name in french

Hi,
I am using Office 2010. I have strange problem. All my language setup is English. Though when I create a new excel file using right click options. It does create a new excel file with work sheet named in French by default. I see following three worksheets:
Feuil1, Feuil2, Feuil3.
How can I change this to English name so everytime it creates work sheet names as Sheet1,Sheet2,Sheet3?

Do you have a language pack installed? I assume your computer language is set to French?
Maurice

Photoshop Opens new blank files abnormally slow...

Similar Messages

Maybe you are looking for