Photoshop painting black when I'm not using black?

Okay so this just started yesterday. I was painting in photoshop and starting to color what I had drawn but for some reason it starts painting some black into the color I'm using. I have no idea why it's doing that. I do everything in separate layers and I hadn't even colored anything in black yet as you can see in the pic below. I do use a wacom tablet but I dont think it's doing it because of that. I just tested that theory by using my regular mouse and it still paints black. I do have to add, it's not the whole thing that gets painted black, it's just certain parts. Also, I use PS cs6. Anyone know how I can fix this?

Have a look at the brush mode in the Options bar
[EDIT]  Just to add that if you had tried painting outside that beige colour, I think you'd have guessed straight away that it was a blend mode problem.

Similar Messages

  • I am getting electric current type shocks whilst using my track pad on my macbook pro. This happens when it is both plugged in to charge and also unplugged. I am left with a constant type pain of prickly pins and needles even when I am not using it.

    I have recently bought a Macbook pro and have noticed that I am getting an electric current running up my fingers when using the track pad. This happens when it is charging but most worryingly it happens when it is not plugged in. It leaves me with pins and needles type feeling in my hand and arm even when I am not using it. Also when I sit it on my lap I get the same electrical current in my legs and down to my feet.
    Surely this cannot be what I should expect with an apple product?, has anyone else experienced this?.
    Yesterday I couldn't bare to use it the current was so strong.  I went out for the rest of the day and suffered with pins and prickly needles all day.

    Two possible courses of action suggest themselves:
    (1) Return your computer immediately to point of purchase and/or authorized service provider.
    or
    (2) Consult with your doctor about your neurological symptoms.

  • MacBook Pro 13" i7 2011 Freezing when I'm not using it.

    I've got the 2011 MacBook Pro 13" i7 with 256GB SSD. It runs really2x fast and am very pleased with it. However, It has a weird issue... It totally freezes when I'm not using it sometimes. It's happened three times now and every time it freezes it would be when i left it for a while like seconds to 5 mins and when i get back it's already frozen. Note, it didn't freeze from coming from screensaver or sleep. How I left the screen is what I see when I get back. I can't move the cursor, the keys don't respond, when I close the lid it doesn't sleep. I'd have to press and hold the power button to force shut it down and boot up again.
    I've already contacted Apple Support the second time it happened. The tech was friendly and we did some reseting of PRAM and stuff. I just put up iStat on my menubar to see if anything weird would show there if it ever freezes again after now the third time it happened!
    Please help! This is annoying.
    My specs:
    Mac OS X 10.6.7
    MacBook Pro 13" i7 20011
    2.7 GHz, 8GB ram, 256GB SSD.

    Thanks,
    The sad thing is where I am, I don't think there are Apple replacements here yet. I had my mac bought in the US and brought by relatives all the way to the southern part of the Philippines.
    It's just weird. I would understand more if my mac froze under a heavy task which so far it hasn't. I have run TWO Windows 7 instances: one Boot Camp, the other virtual, had a whole lot of applications running and while Even playing Star Craft 2! And it run so smoothly I was so impressed. It just so happens to hang when I leave it there doing nothing! ??

  • Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Assuming you are disconnecting from line power, when you say switched on, do you mean it was shutdown or in sleep mode?  If sleep mode the battery will still drain because sleep still keeps some things active and the battery does drain a little.  However, to go from 100% to 79% charge overnight is a bit excessive in sleep mode.  Unless you have some processes set to activate over night by the cron file and do things like backup the system.
    What are the statistics on the battery, the apple in the upper left corner, About This Mac, More Info, System Report, Hardware, Power...things like battery Condition, Capacity, remaining charge, voltage, current.

  • Why does the apple tv light come on when I'm not using it?

    Why does the Apple tv light come on when I am not using it?

    my atv1 does that sometimes
    I'm 90% sure that it's because it crashed and rebooted
    it's basicly a computer and sooner or later a computer will
    crash unless rebooted

  • How do I turn AppleTV off when I'm not using it?

    How do I turn off AppleTV when I'm not using it?

    It actually goes to sleep instead of powering off. Apple TV only uses 6 watts of power. That would mean 10 Apple TVs would consume the same amount of power as one 60 watt bulb and that's when it's on (not in the sleep mode).
    You can set it to go to sleep after 15 min., 30 min., etc. of inactivity in settings. I think the default is 15 min. That doesn't include watching a movie. You can also put it in the sleep mode in settings, but the easiest way is with the remote.
    Hold the Play/Pause button on the reomte for 5 secs to put it to sleep. This only works from the main menu. To go to the main menu quickly, hold the menu button for 3 secs.
    Source

  • Should  I leave my macbook plugged in when I'm not using it?

    Should I leave my macbook charging cable plugged in when I'm not using it?

    It won't hurt anything (i.e., it won't overcharge). It isn't a good idea to leave it plugged in 100% of the time. One common recommendation is to use the battery at least one cycle per month without ever deeply discharging it. Ways to do that would be to use it on battery power until it is discharged to 50% twice during a month or to 80% 5 times during a month or some other combination that adds up to roughly 100% usage once per month at a minimum. Another way of stating that is that you should use the battery sometimes.

  • My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

    My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

    iOS 7 has many multiple tasks. You can save battery life to some extent by few steps. First go to location services and bettr 'Off' them which are not needed. (Ex. Notes.. Reminders.. Etc). Also you can off few apps in 'get notifications' centre. Also usage of 3g by any mobile consumes much battery life. Better to connect any Wi-fi

  • My iPhone5 battery dies when I'm not using it

    My iPhone5 battery dies even when I'm not using it its like I put my phone down and it's a 10% then when I look at the battery later when I look at the battery it's like at 1% please help me thank you

    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.

  • I have a version of photoshop 7.0 which I have not used for some years. I would like to install it o

    I have a version of Photoshop 7.0 that I have not used for some years. I want to now install it on my computer which uses Windows XP. How do I go about it?
    Thanks

    You simply run the install program and hack in your serial number.
    Mylenium

  • Something is using up all my data even when I'm not using apps. Help please!

    Something is using up my data even when I'm not using any apps. Please help!

    I turned off my mobile data and made no phonecalls or sent no text messages but 30 minutes later my phone credit was a euro less even though I had just topped up. I have had problems with my mobile data using up all of my network provider allowance and then the remaining balance on my phone. And this is even though I had not been using it much.

  • Cascaded routers: no internet access when second router not use NAT

    Cascaded routers: no internet access when second router not use NAT
    Here is my setup:
    [pre]
    WAN
    |
    | 74.96.170.x (WAN IP)         |
    | Router1(Verizon FiOS Router) |
    | Model: MI424WR-GEN2 (Rev F)  |
    | Firmware: 20.21.0.2          |
    | Def router: 74.96.170.1      |
    | 192.168.1.1 (Local IP)       |
    |
    |  192.168.1.22 (WAN IP)   |
    |  Router2(Linksys)        |
    |  Model: WRT54GL v1.1     |
    |  Firmware: v4.30.16      |
    |  Def Router: 192.168.1.1 |
    |  192.168.2.1 (Local IP)  |
    |
    | Computer 192.168.2.160   |
    | Def Router: 192.168.2.1  |
    "q.route" 120L, 4441C written
    [m.wang@m-wang-ltm2:/Users/m.wang/m/Network]
    $ more q.route 
    Cascaded routers: no internet access when second router not use NAT
    Here is my setup:
    [pre]
    WAN 
    | 
    | 74.96.170.x (WAN IP)         | 
    | Router1(Verizon FiOS Router) | 
    | Model: MI424WR-GEN2 (Rev F)  | 
    | Firmware: 20.21.0.2          |
    | Def router: 74.96.170.1      |
    | 192.168.1.1 (Local IP)       | 
    |
    |  192.168.1.22 (WAN IP)   | 
    |  Router2(Linksys)        | 
    |  Model: WRT54GL v1.1     |
    |  Firmware: v4.30.16      |
    |  Def Router: 192.168.1.1 |
    |  192.168.2.1 (Local IP)  |
    |
    | Computer 192.168.2.160   | 
    | Def Router: 192.168.2.1  | 
    | NO iptables, basic setup |
    [/pre]
    On computer, I have:
    [pre]
    # route
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    default         192.168.2.1     0.0.0.0         UG    2      0        0 enp2s0
    loopback        localhost       255.0.0.0       UG    0      0        0 lo
    192.168.2.0     *               255.255.255.0   U     0      0        0 enp2s0
    [/pre]
    On Router2, I have:
    [pre]
    Routing Table Entry List
    Destination LAN IP | Subnet Mask   | Gateway   | Hop Count | Interface
    192.168.2.0          255.255.255.0   0.0.0.0     1           LAN & Wireless
    192.168.1.0          255.255.255.0   0.0.0.0     1           WAN (Internet)
    0.0.0.0              0.0.0.0         192.168.1.1 1           WAN (Internet)
    [/pre]
    Router2's Operating Mode is Gateway. On Router1, I have: 
    [pre]
    [Router1] Routing Table
    Name                  Destination Gateway      Netmask       Metric   Status
    Network (Home/Office) 192.168.2.0 192.168.1.22 255.255.255.0 0        Applied 
    Network (Home/Office) 192.168.1.0 192.168.1.1  255.255.255.0 0        Applied 
    Routing Protocol: Internet Group Management Protocol (IGMP)
    Default Gateway: 74.96.170.1
    [/pre]
    On computer, I can run tcptraceroute to yahoo.com OK:
    [pre]
    # tcptraceroute yahoo.com
    Selected device enp2s0, address 192.168.2.160, port 46596 for outgoing packets
    Tracing the path to yahoo.com (206.190.36.45) on TCP port 80 (http), 30 hops max
     1  192.168.2.1  0.610 ms  0.729 ms  0.735 ms
     2  192.168.1.1  1.843 ms  1.378 ms  1.363 ms
     3  l100.washdc-vfttp-107.verizon-gni.net (96.241.146.1)  13.620 ms * *
    ... /* It reached the destination. */
    [/pre]
    I want to change Router2's Operating Mode from "Gateway" to "Router" because I
    want to turn off NAT on Router2 so that I can access all computers attached to
    Router2 by their individual IP instead of using port forwarding at Router2.
    The problem is after the mode change from "Gateway" to "Router", and regardless
    whether I disable RIP or enable RIP, and on what interfaces it is enabled, computer
    192.168.2.160 does not have internet connection. 
    Observations:
    [0] INTRAnet works as I can reach computer 192.168.2.160 from computer behind Router1
    192.168.1.x and vice versa.
    [1] ping and traceroute *work* on Router2 itself using the built-in dianostic tool.
    [2] nslookup on computer 192.168.2.160 always works on new lookup. It uses
    192.168.2.1 as the resolver.
    [3] tcptraceroute stops after step 2:
    [pre]
    # tcptraceroute yahoo.com
    Selected device enp2s0, address 192.168.2.160, port 45999 for outgoing packets
    Tracing the path to yahoo.com (98.139.183.24) on TCP port 80 (http), 30 hops max
     1  192.168.2.1  2.553 ms  0.534 ms  0.638 ms
     2  192.168.1.1  1.342 ms  0.964 ms  0.867 ms
     3  * * *
    [/pre]
    [4] tcpdump shows that computer 192.168.2.160 tries to reach out and nothing is returned:
    [pre]
    13:34:03.172828 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
    13:34:06.175786 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
    13:34:09.178804 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
    [/pre]
    This is not expected because NAT to internet should still be done by Router1, no? Computer
    behind Router1 with IP 192.168.1.x has internet connection.
    [5] It looks like I cannot change the Routing Table Entry on Router2. I do not think I need to change anything,
    just an observation.
    [6] If I use LAN to LAN connection, then both intranet and internet works. [The internet IP of Router2 can be
    anything not in the same subnet of the Router1, and DHCP on the local side should be disabled to avoid conflict
    with the the DHCP on Router1].

    I have a question. Unfortunately in order to ask my question, I have to have a lengthy description of my setup. Basically, I have a second Linksys router in "router" operating mode with NAT disabled connected to the Verizon router, and I have a computer which is in a different subnet (192.168.2.x) behind the Linksys router. This computer can communicate with computers behind Verizon router in subnet (192.168.1.x), but cannot reach internet. This is a simplified version of my question, full details are in the original post.
    If I setup the Linksys router in "gateway" operating mode, which means with NAT enabled, then both intranet and internet works, but there is no easy way to setup port forwarding for 10 compueters in 192.168.2.x network to communicate with 10 computers in 192.168.1.x network.
    If I setup the Linksys router in a LAN to LAN configuration with Verizon routers, but this way all computers are in the same subnet, I want them to be in different subnet for access control and things like that.
    I hope this makes things a little clear.
    Thanks.

  • I had join the Photoshop Photography Program, but still can not use the photoshop cc, the photoshop just ask me the serial no, but i can't find my serial no.

    i had join the Photoshop Photography Program, but still can not use the photoshop cc, the photoshop just ask me the serial no, but i can't find my serial no.

    Hello,
    see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html  here >>> How many computers can I install on
    I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    Good luck!
    Hans-Günter

  • HT1338 why does my imac keep making a noise every 30 seconds when I am not using it?

    My iMac keeping making a sound (sort of a clicking sound) every 30 seconds when I am not using it. It is very annoying; is therre a way to stop it?

    Bring it in to service, and ask them to tell you what the noise is.  Sometimes it just is the optical drive realigning itself.   It could be the sign of a dying hard drive.  Only they can tell the difference.

  • Just bought the iphone,battery dies within a day.anyway to get the apps not to run when i am not using them?

    just bought my iphone, and the battery dies within one day.  Is there anyway to get the apps not to run when i am not using them to save my battery

    Yeah. Double tap the home button and the screen will shift upwards to show all your running apps. Just press and hold one until they start 'wiggling' then press the 'no entry' like sign that appears in the top left corner of the apps. That'll close them and release the memory and resources they're taking up

Maybe you are looking for