Photoshop Pattern Definition not working correctly

I work as a graphic designer at a company working with CS6. I try to define a pattern but when the dialogue box pops up in define pattern the pattern does not define as I want it to. Instead of defining it as it looks in the image. The pop up turns it into something else. I've taking a screen capture of the problem and inserted it below.
What do I do to fix this issue?

There was a similar problem reported five months ago:
http://feedback.photoshop.com/photoshop_family/topics/incorrect_cropping_of_define_pattern _in_32_bit_mode_in_some_cases
Adobe completely ignored the report. Not even an acknowledgement. That's what we get for $1000, I guess.
Try creating your pattern in 8-bit RGB mode. It'll still be usable in other modes.

Similar Messages

Does Photoshop 7 DEFINITELY not work?

I've ordered Leopard only so that my new iPod Touch will work (currently have Panther on my 1.25GHz G4).
But if Photoshop 7 (and presumably also Illustrator and InDesign of the same vintage) definitely won't work at all, as looks likely, then I'm inclined to not bother installing it because upgrading to a new Creative Suite is a whole different ball game in terms of cost.
Question is, can I now get hold of a copy of Tiger? Wish I'd upgraded to Tiger at the time now.

>does it not work on vista at all?? i can tbelieve that
Why not? Vista is a MAJOR change from what was used when P7 was written
Both Microsoft AND Apple (ala Snow Leopard OS) are known to break things with each new version of their operating system software
Even within Microsoft, the Office 97 I use with WinXP does not work with Vista or Windows 7
When I build a 64bit computer next year and start using Win7 64bit, I will have to buy a new MS Office and all new Adobe CS5 software

I recently had a bad experience with an online computer repair company and lost much and Photoshop CS5 is not working correctly. I want to reinstall but found a note on my original bill that says it is not compatiable with Windows 7. I am afraid to delet

I want to delete and reinstall Photoshop CS5. I found a note one the original invoice that says it is not compatiable with Windows 7. I am using a PC.
Is there anyway I can download an up date. I think I lost some of the componants. It is really acting up. Can I get Help here?

CS5 runs on Window 7 very well.
Photoshop CS5 system requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP with Service Pack 3; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (Service Pack 2 recommended); or Windows 7
1 GB of RAM
1 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash-based storage devices)
1024 x 768 display (1280 x 800 recommended) with qualified hardware-accelerated OpenGL graphics adapter, 16-bit color, and 256 MB of VRAM
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
DVD-ROM drive
QuickTime 7.6.2 software required for multimedia features
Broadband Internet connection required for online services*

Tools in Photoshop Elements 13 not working correctly

When I use certain tools and shortcuts, they don't work. I've had to reset the tools many times. The brush tool, the zoom shortcut, and the move shortcut work intermittently. When I activate the mask using the backslash key and use a brush with black or white, it adds or removes the opposite of what I picked. Any suggestions?

Which OS are you on? Did you try deleting preference file for PSE? To do so, on Windows please keep Ctrl+Alt+Shift key pressed and launch Editor.
If on MAC, try Cmd+Option+Shift key instead.
Thanks
Andaleeb

Since I upgraded to Yosemite, my CS5 does not work correctly.

Since I upgraded to Yosemite in October, my photoshop CS5 does not work correctly. When right clicking to change a brush size, the adjuster when moving to the right or left, either sticks or moves radically. As I set the size of the brush and move my cursor back to the image, the adjuster moves with the cursor.
Help!

sharonfrombury wrote:
Is there no contribution from Apple support community for this question yet? I know there have been teething problems upgrading to Yosemite, but this loss of functionality is adding administrative workload that I can ill afford. Come on Apple, some ray of light please.
If you read the Terms of Use you agreed to you would realize Apple does not read or participate in these user forums. All posts and responses are end users just like yourself. If you have feedback for Apple please post it at www.apple.com/feedback. Please do not expect to hear back from Apple, they read the feedback but do not reply.
Also, the feature the feature of combining multiple PDF's into one document using the Preview app works perfectly.

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

XSLT not working correctly in BPEL

Hi,
We are using XSLT to remove namespaces from our XSL. When testing this XSL in Jdeveloper, it works fine. But when we using it in BPEL, the transformation is not working correctly.
Please find below the XSL content
+<xsl:stylesheet version="1.0"+
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"                xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"+
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
exclude-result-prefixes="xsl xref xp20 bpws ora ehdr orcl ids hwf">
+<xsl:template match="comment()|processing-instruction()|/">+
+<xsl:copy>+
+<xsl:apply-templates/>+
+</xsl:copy>+
+</xsl:template>+
+<xsl:template match="*">+
+<xsl:element name="{local-name()}">+
+<xsl:apply-templates select="@* | node()"/>+
+</xsl:element>+
+</xsl:template>+
+<xsl:template match="@*">+
          +<xsl:choose>+
               +<xsl:when test="name() != 'xmlns'">+
                    +<xsl:attribute name="{local-name()}">+
                         +<xsl:value-of select="."/>+
                    +</xsl:attribute>+
               +</xsl:when>+
          +</xsl:choose>+
+</xsl:template>+
+</xsl:stylesheet>+
The BPEL code of the transform is:
+<assign name="Transform_1">+
+<bpelx:annotation>+
+<bpelx:pattern>transformation</bpelx:pattern>+
+</bpelx:annotation>+
+<copy>+
+<from expression="ora:processXSLT('Transformation_1.xsl',bpws:getVariableData('inputVariable','payload'))"/>+
+<to variable="TempVar" part="payload" query="/ns1:mthReplacement_input"/>+
+</copy>+
+</assign>+
Not sure why the transformation isnt working in BPEL. Has anyone faced similar issues? Please share your experiences.
Thanks
John

Hi John ,
We have tried this instead of writing new code in the xslt , pls do the following
1.Open the xslt in jdev.
2.Remove the attribute exclude-result-prefixes for the element xsl:stylesheet.
3.Your new XSLT file should look like below,
<xsl:stylesheet version="1.0"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
>
....business logic...
</xsl:stylesheet>
4.Compile and deploy your BPEL Process.
5.You should not see any namespaces in the BPEL Console now for this xslt.
Thank you.
Regards
Venkat.

Brush function not working correctly PS Elements 11 for Mac

The brush is not working correctly in that I cannot drag the brush. It allows only spot healing, not dragging the brush. Didn't use to have this problem. Now do. Not sure what has changed. Thank you!

Is this happening after upgrading to Yosemite?
If yes, please see:
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
Thanks,
Anwesha

Elements 13 crashes - Windows message - this program is not working correctly - windows will close it.

I bought Elements 13 4 days ago through Amazon - so far it has not run for more than 5 minutes before Windows closes it down with the message - this program is not working correctly, windows will close it. I know this is not unusual but has anyone got a solution - apart from returning it
with a very unfavourable review? I have tried all the suggested fixes on the Adobe help site with no result. Elements 10 runs OK on the same machine.
Alternatively, is there any possible way to get support from Adobe?

juliana
Do you have any version of Premiere Elements 13 or only Photoshop Elements 13 which comes with Elements Organizer 13?
Let us look at the following for Elements Organizer 13....
1. Deletion of disabling the Elements Organizer 13 setting file which is named psa.prf. In Windows 7, 8, o 8.1 64 bit, it is found in the
path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Elements Organizer
13.0
Organizer
and in the Organizer Folder is the psa.prf file that you delete or disable by renaming it from psa.prf to psa.prfOLD.
2. If the above gains you successful entry into the Elements Organizer 13, then you can
a. create a new catalog
and/or
b. repair or optimize the current one
See Elements Organizer 13/File Menu/Manage Catalogs/Catalog Manager.
3. There are times that certain formats will bring the Elements Organizer down when you try to import those formats into
it. But, from what you wrote, your current problems do not sound media related.
3. At your earliest opportunity, please update Elements Organizer 13 to 13.1 using its Help Menu/Updates.
Please review and consider and then let us know the outcome.
Thank you.
ATR

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

Why is my adobe photoshop elements 12 not working. it says initializing and then it says there is an error and closes itself

why is my adobe photoshop elements 12 not working. it says initializing then error and shuts itself down.

Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player.

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

Photoshop Pattern Definition not working correctly

Similar Messages

Maybe you are looking for