Photoshop prints garbage on Phaser 6200

I have CS3 Photoshop, Leopard and an Intel Mac G5. When I try to print an image from Photoshop on my Phaser 6200, the printer spits out garbage pages until I disconnect it. The same image prints correctly on a Canon printer and will also Print if I invoke the preview before printing it on the 6200. Any dieas?
Thank you.

Don,
First guess is that the driver software for your Phaser is not fully Leopard compatible. Check and see if there is a newer driver from the manufacturer.
Another thought (if this is a choice), try printing as ASCII rather than binary. Or vice versa.
Neil

Similar Messages

Photoshop CS3 printing garbage characters on HP LaserJet 1300

After installing CS3, Photoshop prints garbage characters on my HP LaserJet 1300.
Yes, I have tried printing as ASCII, ASCII85, Binary and JPEG - nothing helps (plus the settings won't stick even after holding down Alt and clicking the Remember button).
The only way to print right now is to choose Save as PDF in the print dialogue, open the PDF in Adobe Reader and print from there.
Any ideas?

tzw - I responded about this on another forum. I talked to technical support at Adobe about this exact issue about 2 months ago - can't print photoshop CS3 on any of my three HP printers. ( I have a HP1200, an HP 2550 and a HP photosmart 7660) (CS2 works fine) They worked with me for about an hour - called me back and worked some more, and then decided to send it up to the programmers (or engineers or whatever) The programmers called me and worked with me for another hour - trying different set-ups etc., but the conclusion by them was that this was a huge problem in that there were a lot of HP printers out there - that they were going to give this their top priority - and that there would be a fix for this soon. (I have yet to see a fix.)

Xerox Phaser 6200 driver OSX 10.7?

I've been waiting for Xerox to release a Lion compatible driver for my printer before upgrading to Lion.
Their latest compatibility chart shows the Phaser 6200 as unsupported in OSX 10.7.
Is there perhaps a third party driver that will work in this situation?
My current options seem to be to buy a new printer, or continue waiting for Xerox....

Have you tried the Xerox drivers?
<http://www.support.xerox.com/support/phaser-6200/file-download/enca.html?operati ngSystem=macosx&fileLanguage=en&contentId=66079&from=downloads&viewArchived=fals e>
It's a Postscript printer, so just needs a PPD file to provide the options (such as two-sided printing) to the Apple Postscript driver.
I have an even older Pahser 850DP and it works fine with Lion using the PPD files from the Xerox site.

HP OfficeJet 7310 Prints Garbage via D-Link

I have an HP Officejet 7310xi All-in-One: The only way I can use all the functions and have it print correctly is having it directly connected to my computer. But when I connect it (USB) via my D-Link DPR 1260 wireless print server, which is wirelessly connected to my Airport Extreme, it prints garbage at the top of each page -- squishes everything up there, dropping lines.
For example, in MS Word, if I have two tables separated by three lines, the tables print one after the other. If I have various graphics, they squish to the top. This happens with PDF documents also, opened via Adobe Reader or Adobe Acrobat. In addition, all the text in Excel spreadsheets cascades to the bottom roght of the cells, dropping text out of the cells.
Finally, it allows hardly any of the HP multifunctionality it's supposed to come with.
HP touts this as being a wireless-adaptable printer, so everything should work with my wireless setup. The D-Link is supposed to work with Macs also.
My HP LaserJet 1300 works fine wirelessly with this setup.
I have downloaded and installed all the latest HP drivers. Everything else is updated as well (latest Airport, D-Link etc.) I cycled everything, restarted everything, reset the printers, etc. etc. Spent at least 8 hours total on the phone wiht Apple, HP, and D-Link technicians.
Does anyone have a fix for any of this?
The one issue I've read that MAY be relevant relates to non-ASCII text messages being sent to the PS printers (an Adobe issue maybe?), but I can't find where to fix that with Word documents, if it's even the issue.
I'm aware that there are problems with multifunction printers and Leopard, but I have the latest Tiger.
Any help would be appreciated.

Infinimac wrote:
Finally, it allows hardly any of the HP multifunctionality it's supposed to come with.
This is a limitation of using third party wireless print servers. Most multifunctions will only allow (simple) printing.
HP touts this as being a wireless-adaptable printer, so everything should work with my wireless setup.
I would expect this is the case IF you use the HP wireless adapter for your printer.
The D-Link is supposed to work with Macs also.
My HP LaserJet 1300 works fine wirelessly with this setup.
This would be expected as it is just a printer.
iFelix

How to turn off cs6 photoshop print settings

i recently installed cs6... from cs5.. i have a canon wide format printer that i am accustomed to using when printing my photos... however NOW when i choose to print, it brings me to a Photoshop print settings dialog box... unfortunately, this dial;og box does not allow me to make certain adjustments my canon print dialog box does allow... so how do i turn off the Photoshop print settings and go back to my canon print settings dialog???
please help asap as i am trying to print a photo at this time....
thanks in advance... Dave

Peter and JJ... Yes, i have been to that dialog box... however, this still leaves me with a few less options availible to me in the Canon ipf8400 printer PRINT dialog box.... I cant explain what is missing, because i dont have the dialog box open.... what i can say is that this "Photoshop Print Settings" box has NEVER opened before when i had CS^ when i chose to "print" a photo... a little frustrated right now... but i really do appriciate any help...
thanks again... Dave

White background of image created in Photoshop prints as grey through iPhoto postal ordering service.

I have created an image in Photoshop with a white background (I stuck with the default white background that the new image gave me). Over the top of this, I placed some images, saved it as a JPG, imported it into iPhoto and ordered it as a postcard-sized picture.
When I received it in the post, the whole image had printed with a grey overtone: the white background was in fact grey, and the pictures over the top were darker.
How can I resolve this to print my image with a truly white background through iPhoto's ordering service?
Many thanks,
Adam

If unchecking the scene-referred profiles box clears the display problem in Photoshop, you most likely have hit a known bug with defective monitor profiling packages building defective monitor profiles that affect Photoshop and After Effects — specifically, the defective profile is erroneously marked as "scene referred."
Version 4 ICC Profiles: If your are using v4 printing profiles, try Googling for more information...some symptoms of this bug are Photoshop prints a light cyan or blue in the page white areas. The Fix is to use Version 2 printer profiles.
there is another old known issue that has to do with trying to Hard Proof simulate press conditions (printing cyan in whites) but i am not sure what you are trying and i can't recall it right now
if those aren't it upload these screenshots of your workflow:
show full Photoshop window including zoom% and Docuent Profile in lower left corner

Printing Garbage Characters

When a particular user prints a certain PDF the first page, which appears to be a form, prints mostly weird characters with some numbers mixed. If I log into the same machine under my login I can print it fine. My guess is that user has some setting set that is causing this issue. Any thoughts?

My issue wasn't just about the first page; most of my pages printed garbage, only a few printed fine.
I started opening the PDF file in Preview and printing from that. I could add blank pages if I wanted a multi-page document to print some blank pages on the back of my 2-sided copies in Preview (Edit - Add blank page). This works great! I've spent months trying to figure this out. I'm running Mac 10.5.8 OS with an updated version of Reader (also printed garbage) and Acrobat Standard 7.0, which is old, but I need it to make one PDF from multiple PDFs.

HP3015 Printing Garbage Characters

We have had 2 HP3015's that all of a sudden will start printing garbage like ASCII characters. Tried reloading drivers. If we put in HP601 machines instead, the machines function fine. Hospital setting.

My issue wasn't just about the first page; most of my pages printed garbage, only a few printed fine.
I started opening the PDF file in Preview and printing from that. I could add blank pages if I wanted a multi-page document to print some blank pages on the back of my 2-sided copies in Preview (Edit - Add blank page). This works great! I've spent months trying to figure this out. I'm running Mac 10.5.8 OS with an updated version of Reader (also printed garbage) and Acrobat Standard 7.0, which is old, but I need it to make one PDF from multiple PDFs.

Bonjour Printer installs OK but prints garbage symbols

I have installed Bonjour 1.0.4 on a fresh installation of Windows XP SP2. It installed fine and bonjour already had my printer in its list of drivers (HP DeskJet 815c), so set up was easy (I have my printer plugged into an airport express which my windows machine connects to over the LAN).
My mother's iMac printed to the printer fine over the LAN.
The Windows machine printed garbage instead of a nice simple A4 page of black & white. It prints garbage symbols, one or two lines a page and was going to go for many pages instead of just one.
I never restarted after installing either Bonjour or the printer but I wasn't prompted to.
Any suggestions on what I might do? Would the generic printer drivers be worth a go?

Hi
Try the drivers from the link below on the windows 8.1 unit
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=4204...
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

DJ 6940 prints garbage in mid-document

I have a user with a DJ 6940 that suddenly will start printing garbage in the middle of a document. It used to do fine for the whole document. I've uninstalled and reinstalled the whole printer, but if anything it works worse. Any ideas aside from replacing the printer? It's connected to Windows XP via USB.

We also have a similar problem printing to a Brother MFC-8860DN Laser on a small home network.
On one Vista32 SP1 PC only, we are unable to correctly print PDF's to the Brother MFC-8860DN, but the same PC does print the same PDF correctly to a Lexmark C510 Colour Laser. This is the same with all PDF files (including ones that used to print correctly).
The problem we are having is that it appears all the writing is printed using symbols and foreign characters and not standard English letters (looks something like a wingdings font). However all the formatting, table outlines and pictures print fine. Choosing print as image from the setup dialog produces the same results.
This started about 2 months ago when we upgraded this PC to Acrobat Reader 8.2 (we have not done the others and they are still ok). We have since uninstalled both acrobat reader and the brother drivers, then re installed the latest versions of both of them.
We have also tried rolling back to an earlier version of Acrobat reader.
We have quite strong virus protection and have done scans with many packages and nothing has been found.
I can send a scan of a printout if it would help anyone track down the issue.
Regards,
Peter.

Printer prints garbage

I have my Photosmart c4180 All-in-One printer plugged into my Time Capsule. I have a wireless iMac, PC and Laptop and one wired PC all connected to it.
The iMac prints fine but the PCs all print garbage. They FIND the printer but still print garbage.
I have the HP drivers installed on each PC but it does not help.
Also, the scanner does not work now that it's plugged into the Time Capsule. I'm assuming thats normal, but if not, add THAT to my problems.
iMac running Leopard 10.5

I had to physically plug the printer INTO the XP PC for it to install the remainder of the drivers before unplugging it and plugging it into the Time Capsule.
And apparently HP doesn't make their scanners to work over a network (at least they don't have any patches so it'll work)

I recently upgraded to Reader X, using XP SP3, but it prints garbage

I have two printers, an HP j4580 (default) and a Brother mfc-7420 (now gives poor quality after a number of years of satisfactory use). I can usually print a single page PDF but if there are multiple pages, some or all of them print garbage. I have tried unloading and reloading the software without success. I have seen tips for similar issues but none of them address my set-up, for example the j4580 properties does not have a function allowing or not allowing the printer to choose fonts. I have also tried downloading files to disk before printing but this does not make any difference. I have read that versions of Reader prior to X are wide open to malware attack and although I preferred Reader 9 I am not happy about going back to it for this reason. HELP!

In total desperation I went back to 9.4.5 today after reader X gave me complete garbage on a ONE-PAGE document in very simple text only!!
I am still concerned that 9 does not have the answer to hostile hacking and nobody has put my mind at rest about that but I simply have to have a version which actually works and I don't trust smaller companies to have the answer if Adobe doesn't (call me naive).

LP print Server Prints garbage via Samba

Hi,
I have configured a print server that prints just fine when used by a Solaris host. Samba does not print at all using a pcl driver and prints garbage with a PS driver. The server is Solaris 10 Update 5. Samba is 3.X. I used this command to get one of the printers working on unix:
lpadmin -p myprinter -v /dev/null -m netstandard_foomatic -o protocol=bsd,dest=myprinter1:9100 -o banner=never -n /etc/lp/model/ppd/system/HP_LaserJet_4250.ppd
If I chop the command down to just:
lpadmin -p myprinter -v /dev/null -m netstandard -o protocol=bsd,dest=myprinter1:9100 -o banner=never
It will print jobs from unix/samba clients. From what I can tell Samba likes raw devices and the ppd file I use is a Postscript file. The reason i need the ppd is so that the printer can do some useful things like double sided printing and 2 pages per sheet.
Any help is appreciated.

Infinimac wrote:
Finally, it allows hardly any of the HP multifunctionality it's supposed to come with.
This is a limitation of using third party wireless print servers. Most multifunctions will only allow (simple) printing.
HP touts this as being a wireless-adaptable printer, so everything should work with my wireless setup.
I would expect this is the case IF you use the HP wireless adapter for your printer.
The D-Link is supposed to work with Macs also.
My HP LaserJet 1300 works fine wirelessly with this setup.
This would be expected as it is just a printer.
iFelix

[SOLVED] Printer prints garbage text - Error with pstoraster

I have a Epson Stylus C43SX printer, which is connected to LPT#1.
When I try to print something, the printer will print garbage text.
From cups manager browser interface ( http://localhost:631 ), if I try to print the test page, it prints out garbage.
If I select 'Print self-test page', the cups manager reports an error -
"/usr/lib/cups/filter/pstoraster failed"
The description of printer, as seen on cups manager page -
Description: Epson Stylus C43SX
Location:
Printer Driver: Epson Stylus C43SX - CUPS+Gutenprint v5.0.1
Printer State: idle, accepting jobs, published.
Device URI: parallel:/dev/lp0
Cups package version cups 1.3.4-1
Gutenprint package version gutenprint 5.0.1-3
Thanks in advance!
Edit: Added [SOLVED] to the subject
Last edited by d2v (2007-11-17 08:21:25)

I can print properly again. I reinstalled arch and added the printer using cups http interface.

I have a HP laserjet P2055dn and every 4th or 5th page prints garbage. Any ideas why?

It doesn't matter which program I am in it still prints garbage every 4th or 5th page.

Hi hood_winked,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Photoshop prints garbage on Phaser 6200

Similar Messages

Maybe you are looking for