Photoshop problema con usb cable

Mi p.c. no puede reconocer un sonyericcsson conectado a un USB cable;ya llevo 3 semanas tratando de pasar las fotos a la p.c.primero con un BLUETOOTH y ahora el USB.Ya se me acabó la paciencia pues ADOBE PHOTOSHOP que es el que viene con el software de sony nó sirve para nada.Por favor que alguien me ayude.
[email protected]

Armando Ruiz, primero tendrias que dar mas datos de la situación que vivís, porque en el otro post tambien no dijistes mucho, solo que no anda no anda y no anda, y asi no es facíl que ayudemos.
Primero, Adobe Photoshop no te tiene que reconocer al movil, eso lo tenés que ver desde el soft que te traiga el movil para hacerlo, en el caso de no traer ninguna utilidad mas es porque lo toma como almacenamiento masivo, pero no lo creo ya que solo tenés acceso a determinado sector de la info del movil, si lo tomara como masivo depende el sistema operativo que tengas para ver si necesita driver o no, asi que tendrias que pasar todos esos datos, ya que sin ellos sería todo inutil, si tenes soporte para bluetooth o no en el sistema, y te hago una aclaración:
"ADOBE PHOTOSHOP que es el que viene con el software de sony nó sirve para nada"
A esto te digo, Adobe Photoshop sirve para mucho mas de lo que vos o yo se puede imaginar, trabajo con el hace muchos años y nunca dejo de aprender de el como creo que a mas de uno le sucede, pero de ahi a decir que no sirve para nada, creo que tendrias que analizar tu problema por otro lado mas que por el "adobe no sirve para nada".
Explica bien tu situación y lo tratamos de ver, porque te aclaro algo mas, eso es un problema que no tiene nada que ver con Photoshop, ya que photoshop no maneja nada del sistema a la hora de compatibilizar un periferico, asi que la ayuda la vas a recibir en el caso de que yo o alguien de los que participan en este foro, los cuales son la mayoria personas con mucho conocimiento de lo que respecta a Photoshop, puedan por seguramente tambien convivir con ordenadores y haber resuelto situaciones de este tipo, pero creo que para la proxima vez que tengas un problema con tu movil tendrias que acercarte a foros relacionados a la telefonia movil o similar, asi como recurrir a la tienda en la que lo comprastes en el caso de que sea un desperfecto, o seguir paso a paso las instrucciones del mismo.
Aclara todo, y veremos que pasa, saludos.
dIEGo

Similar Messages

  • How do you fix the problem of USB cable is not compatable, when there is no cable attached?

    how do you fix the problem of USB cable is not compatable, when there is no cable attached?

    Just buy a new USB cable ... dont buy a cheaper one, i think it cost a $2...

  • Having problems with USB cable, please HELP!

    While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
    Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
    Is there anybody out there who can help me?!
    Please!
    Cheers!

    Go to Options -> Media Card -> Mass Storage Mode Support: On
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Problemas con usb con mac osx plus

    Hola, el problema que tengo es que he encriptado un usb en formato mac osx plus y no me acuerdo de la contraseña que le he puesto.

    dixonfilms wrote:
    UN AMIGO QUE ES GRADUADO EN INFORMATICA  ME DICE QUE PARA QUE PUDIERA FUNCIONAR EL CS3 QUE ME VENDIERON TENDRIA QUE INSTALARLO SIN INTERNET CONECTADO.
    Pues ese amigo tuyo se habrá graduado de alguna academia de agricultura o de ganadería, pero de informática no está muy enterado que digamos. 
    CS3 y CS4 requieren de un proceso de activación después de la instalación.  Si no estás conectado al Internet en ese instante, ese proceso lo tienes que realizar por teléfono, comunicándote con un empleado de Adobe y proporcionándole a dicho empleado el número de serie de tu copia.  En ese instante te comunican que ese número no sirve y quedas en la misma situación en que te encuentras cuando lo intentas por Internet.
    Obviamente tu amigo no sabe gran cosa del proceso de activación. 
    Por lo que toca al empaque, la cajas y la calcomanías las fabrican a granel en China y con gran habilidad, a un costo irrisoriamente bajo.  De hecho, los revendedores ya realizan una buena ganacia vendiendo el producto pirata a razón de $25 (dólares de EE.UU.).  Un error que cometen con frecuencia los chinos es el de omitir el espacio después de la coma, escribiendo "Adobe Systems,Inc." en lugar de Adobe Systems, Inc.". Revisa tus materiales.
    Para la próxima vez, recuerda:  si te ofrecen ahorrarte más de unos cuantos dólares, te están estafando.

  • Problema con USB en formato mac os plus

    Hola, el problema que tengo es que he formateado un usb a formato mac os plus con registro encriptado y no me acuerdo de la clave.
    La clave la generó el generador de contraseñas de mac osx.
    He probado intentar formatearlo, pero no puedo formatearlo porque aparece en la utilidad de discos bloqueado.

    Lamentablemente, una vez se le olvida la contraseña de una imagen con formato Utilidad de Discos, que son básicamente de suerte.
    Unfortunately once you forget the password on a Disk Utility formatted image, you are basically out of luck.

  • Problem in usb cable

    i have a problem in my charger cable.
    one of the lines has broken!
    can it make a problem for my iphone?

    If a wire is broken, you are just lucky it is one not needed for your present use, but all lines are needed for something.  Best to get it replaced while it is not interfering with your use, and hopefully still under warranty.

  • Problema con Licencia Photoshop

    Hace dos años aproximadamente, compre una Licencia Photoshop, programa que tuve instalado en un equipo durante todo este período. Debí resetear completamente el PC y logré instalar correctamente Adobe Acrobat Professional, pero no encontré dentro de mi cuenta la licencia de Photoshop.  Que puede haber pasado.
    Nuestra razón Social es "Escuela de Seguros S.A" y la cuenta es [email protected]

    Federico:
    Es probable que no lo haya registrado, como lo bajé de internet y no guarde el N° de serie, que puedo hacer?, Ustedes no guardan un registro de sus clientes?
    Atentamente,
                      Gonzalo Correa Le-Fort
    Director de Administración y Operaciones
                          +56 2 2562 8200
    De: Federico Platon 
    Enviado el: martes, 05 de agosto de 2014 18:32
    Para: GONZALO CORREA
    Asunto:  Problema con Licencia Photoshop
    Problema con Licencia Photoshop
    created by Federico Platon <https://forums.adobe.com/people/federico+platon>  in Foros de usuario a usuario - View the full discussion <https://forums.adobe.com/message/6614915#6614915>

  • I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

    Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

    The the remaining items of the following, you may have to let the battery fully drain.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • HT201263 my phone is in recovery mode and wont restore.  instead i receive the error message 1604.  i have used alternative usb cables and am at a loss. has anyone else had this problem?

    Hi,
    my phone is in recovery mode and wont restore.  instead i receive the error message 1604.  i have used alternative usb cables and am at a loss. has anyone else had this problem?

    Hi there hstear93,
    You may find the information in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • My Ipod touch is frozen.  Shows USB cable with arrow pointing to Itunes.  What is the problem?  This is the second one I have had that has done this!

    My Ipod touch is frozen.  The screen shows only USB cable with arrow point to the word Itunes.  What is the problem?  This is the second touch I have had that has this same problem.  HELP!

    This time try restoring the iPod to factory defaults/new iPod instead of from backup.  You may have some corruption that is causing the problem and it may now be in the backup.  If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

    In the attempt of updating my ipod touch, i am  faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones  in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

    See if placing the iPod in Recovery mode will allow a restore via iTunes
    Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer to help determine if you have a computer or iPod problem.

  • Random Problems with Zen Micro? Try a diff. USB cable

    I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
    So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
    Hope this helps - I am (now) loving my new Micro!

    I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
    I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
    I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
    I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
    My old Zen Micro with the old, original firmware did NOT have this connectivity problem
    Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

  • HP laserjet 6L connected thru USB cable printing problem

    System Board ASUS M3A78-EM does not have LPT port on mother board.
    Printer Model : HP Laserjet 6L Gold (Old printer) Connected thru USB cable (LPT to USB/USB to LPT)
    O/S  Windows XP
    Driver installed automatically and port selected USB
    Previously it was working fine but now a days, I am not able to print clear text on output.. It prints some words in italic, some of half italic, crucked letters. If I start my PC with printer switch off. When ever required printer, I switched ON printer and give command to print. It displays many time "printer failed to print this document". After reboot the system with switched on printer message does not displayed.
    Can any one help to reolve this problem of uneven printing letters.
    my email id is {Personal Information Removed}

    I found this advice on another site:
    "You will need to install drivers for your usb serial adapter, A good way to find which drivers to install (if u dont have them) is to click the apple Icon on the top left, 'about this mac'then click the 'More Info' on the window which appears, then look for USB devices.
    Your serial adapter should appear as a usb device, THen google for the os x usb drivers for the chipset/adapter, or contact your vendor/look on sourceforge for it."
    I don't know if that's the problem, but you should have gotten a driver disc with the converter cable. The one I just received for a pc client has a CD that says it's for Windows and Mac.
    One problem though, the disc is a mini-cd. Not great for slot loading drives, and the driver says Mac 10.1 - 10.3.3. Maybe that's when they made the cable, but I wouldn't be very surprised if it didn't work with Leopard. It's going on a PC so I won't have to worry about it for now.
    Side note about these cables - I have another client who wanted to control his ham radio gear from a Mac running WinXP on Parallels. It wouldn't work in WinXP until I removed the driver from the Mac side. Windows kept complaining that the device was already under control by another program - it meant Mac OS. I'm not sure how I would have been able to make the device work both ways, but luckily, didn't have to find out.
    Leopard saw his Radio Shack cable fine from System Profiler.
    Message was edited by: dechamp

Maybe you are looking for