Photoshop refuses to load images.

So upon getting a new hard drive for my Powerbook (the old one on which Photoshop ran well enough) I have reinstalled the Adobe Creative Suite 2. Everything seems to work, except for Photoshop which, despite any attempt, refuses to load any image file. It simply gives me this error whenever opening or scanning in an image.
http://img122.imageshack.us/img122/6452/picture16wb.png
Since I use Photoshop as my main program of things-to-do, I'm in quite a situation. I've tried an older version of Photoshop as well, CS and 7. They both returned the same error.
Permissions are as correct as they can be, and OnyX has cleared up all my caches, optimized the system, and all that. Photoshop should run, why isn't it?
Any help appreciated.

Alright, so it sounds like you are all up-to-date, but that could be the issue here. Things really do change from update to update or upgrade to upgrade, so 3rd party software may not work correctly on it. Check Adobe's website and see if there is anything under PhotoShop that may fix this issue. Uninstalling and re-installing sometimes will do the trick. Also, have you trashed your preferences for it?
-Jason

Similar Messages

PhotoShop CS2 not loading image

I've been working with CS2 for the past two years with no problem but as of last week, when I open my CS2 and try to open an image, the image does not display in my work area but it displays in my layers menu, nav menu, etc... Is there a setting that was accidentaly changed or did something else happen. I tried uninstalling and reinstalling but no luck.
Any advice or suggestions?
thanks

The image is probably off the screen.
try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

CS3 Photoshop will not load images

I have just recently run into a problem with my CS3 Photoshop. When I try to go through File> Open and choose a .jpg .gif and even .psd file I get an error message saying: ' could not complete your request because it is not the right kind of document.'
When I open in Illustrator there is no issue. Or when I go directly to the file and use Open with, then direct it to Photoshop it opens fine. However, if I need to open another image file I get the error message again. What can I do with this?
Christine Cullum

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Problem with Photoshop CS not loading image.

Hi, I recently had a hard drive problem and had it replaced. I backed up all my files on an external drive.
I moved over all my files and applications. Photoshop runs and opens with no problem.
The problem I'm having is if I double click on a .psd file it launches Photoshop but it do not open the file.
The program never did that before. Is there something that I did not copy over correctly?
Only way I can open a file is File>Open>
And I find that to be aggrivating.
I'm hoping I do not have to re-install Photoshop because I have my original software in storage.
Hoping for a quick fix.
Thanks

Be extremely careful messing with your system settings.
In the Finder try using Command I on any representative file. Then change "open with" to Photoshop, and then use the 'change all' button. If this does still not automatically open the file in Photoshop on double click, then make sure you have run this application http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html on your disk.

Safari refuses to load phpMyAdmin icons

Safari refuses to load image file from our web server phpMyAdmin because of content-security-Policy, yet all other browsers such as Chrome load the images (icons). Attached is a screen shot. This is version 4.01 of phyMyAdmin and the same problem occurs all the way back to phpMyAdmin version 3.5.7 which loads the images (icons). I can find no content-security problem. Hopefully, I have posted to the correct community since only Safari is creating the problem. Running Safari 5.1.9 on Snow Leopard (10.6.8)
All feedback is appreciated.

I had the same problem. I'm also running Safari 5.1.9 on Snow Leopard (10.6.8). I just installed phyMyAdmin 4.0.5 and got the same results as on your screenshots.
The problem is the CSP header that blocks the load of external images.
If you comment out some lines in phpMyAdmin-4.0.5/libraries/Header.class.php, you can deactivate the image blocking of the CSP header.

PhotoShop 2.0 refuses to load properly

Why does my Adobe Photoshop program 2.0 refuse to load up and gives an error message personalization information incomplete . I've reloaded it filled out everything . It's older than E mail registration requires either Fax Phone or mail . How can I circumvent that portion of Reg. ?.

Noel,
There was a time, long ago, when Adobe had at least two "starter level" programs, PhotoDeluxe and also a Photoshop LE. The latter was more often seen bundled with a camera, a scanner, or similar. Think that my copy (never installed) came with an old Nikon scanner, but that WAS a long time ago. I believe that PhotoDeluxe was sold separately, but it might also have been included with some bundle. Though I never used it, I thought of it as more of an Image cataloging program, with limited Image-editing capabilities - not too far from the early versions of PSElements w/ its Organizer, but with a reduced set of editing capabilities, however, I might be wrong.
For less than professional needs, I agree that PSElements would be something that I would think about. It is bound to be much more full-featured, than PhotoDeluxe was, and PSE 11 will run with contemporary OS's. It is really not THAT far behind Photoshop, and the price is very good.
Hunt

Photoshop CC 2014 - Stack Mode Disabled - Load Image Into Stack Has No "Convert To Smart Object" Option

Hi,
I have just installed Photoshop CC 2014.1 and I have "Stack Mode" command disabled.
Also, I have no option to convert layers into smart object when I run "Load Image Into Stack" command.
Can you please tell me how to enable these features?
Thank you very much.
Luca

The 512 MB are a minimum requirement, not some optional thing. Without it, 3D will never work.
Mylenium

Photoshop elements 11 is not launching or loading images (photo editor)

Photoshop elements 11 is not launching or loading images (photo editor)

If you haven't committed to PSE12, yet, then you should be able to download PSE/PRE11 from this website. Be sure to follow the Very Important Instructions to set the Adobe authorization cookie, because the downloads actually come from Adobe:
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

Photoshop CS5.1 Won't Load Images On Screen at retina MacBook pro.

Photoshop CS5.1 Won't Load Images On Screen at retina MacBook pro. Any help? Thanks!

I'm surprised that Apple would attempt such a "hack" design... Switching graphics adapters mid-stream is no small task, and I can't imagine that they could ever make it work seamlessly.
Keep in mind that the nature of the complex GPU beast is that graphics hardware doesn't all work the same (or right) and application software has to make decisions about what to do and what not to do, and even when to invoke certain workarounds - or it would never be possible to run on multiple platforms.
Yes, that seems wrong, but it's necessary and it makes developing cutting-edge graphics applications in the real world much more expensive.
The decisions aren't re-made by an application all the time - that would slow things down terribly. Instead, often the run-time environment is characterized at application startup and the features remembered for later use. Modern applications actually even create programs (e.g., shaders or OpenCL programs) to run on specific GPU hardware, and they have to be compiled - something usually done by the application at startup.
Now imagine that someone changes the capabilities of the graphics hardware completely after the application has started - even from one vendor's implementation to another (Intel to nVidia).
Like I said, I'm surprised a reasonable system designer could ever think that swapping GPUs at run-time could be made to work. At least Apple allows you to turn it off!
Does Apple offer any "geek-level" configuration options that can force the use of a particular GPU for a given application? It seems that this could be an automated workaround that would allow a given application to see only one GPU, which is what Photoshop appears to need here.
-Noel

How I can load images from Creative Cloud storage in photoshop plugin, created in Extension Builder 3 with use html5/css/js?

How I can load images from Creative Cloud storage in photoshop plugin, created in Extension Builder 3 with use html5/css/js ?

At this point there is no API for accessing the cloud storage outside Adobe's own closed loop.
Mylenium

(EPG Install) Error while loading image

Hi,
I am facing "ORA-22288: file or LOB operation FILEOPEN failed" error while running apex_epg_config step. But all the steps before that (i.e. APEX Install [@apexins users users temp /i/] and change admin password) went all fine.
I am trying to install APEX 4.1 on "Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production".
I went through [url https://forums.oracle.com/forums/thread.jspa?messageID=9673913]this thread. But I am not passing /apex directory (apex directory is under "C:/Ash/Technical/Database/Oracle/apex4.1") , here is the outcome:
C:\Ash\Technical\Database\Oracle\apex4.1\apex>
11:33:41 sys@dev10db> @apex_epg_config.sql C:/Ash/Technical/Database/Oracle/apex4.1
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.21
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Directory created.
Elapsed: 00:00:00.03
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 18
Elapsed: 00:00:00.04
Commit complete.
Elapsed: 00:00:00.00
PL/SQL procedure successfully completed.
Elapsed: 00:00:01.14
declare
ERROR at line 1:
ORA-31001: Invalid resource handle or path name "/images"
ORA-06512: at "XDB.DBMS_XDB", line 473
ORA-06512: at line 37
Elapsed: 00:00:00.17
timing for: Load Images
Elapsed: 00:00:01.42
Session altered.
Elapsed: 00:00:00.00
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.48
Commit complete.
Elapsed: 00:00:00.01
Session altered.
Elapsed: 00:00:00.01
Directory dropped.
Elapsed: 00:00:00.07I am installing from my windows XP, but the db server is on Linux.
Error above (line 18) is actually on this line of "apex_epg_config_core.sql" (my db charset is UTF8)
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
The error clearly suggest that the there is an issue with access my directory or file in that directory.
And I believe the 2nd error "ORA-31001: Invalid resource handle or path name "/images"", will go itself once the first one is resolved.
I went through the documentation and other forum threads, but I am stuck with this EPG install, it may be very silly thing that I may be missing, but any help in this matter would be highly appreciated.
Thanks,
Ash
Edited by: ash0602 on Sep 5, 2011 5:19 PM

Thanks Andy and Kiran for taking time to respond.
Andy, "@apex_epg_config.sql C:/Ash/Technical/Database/Oracle/" will not solve the problem, neither changing directory's name from apex4.1 to apex_4.1_en, as my directory structure till images is: "C:\Ash\Technical\Database\Oracle\apex4.1\apex\images".
Kiran, sorry but I do not understand the difference between what I have written what you mentioned above.
Though I understood the issue, when you see the apex underlying code (apex_epg_config_core.sql) it is actually creating a directory object ('APEX_IMAGES') in the database. While I was trying to refer the directory on my local windows PC ('C:\Ash\Technical\Database\Oracle\apex4.1\apex\images'). I then logged into the LINUX server and ran the command and it all went fine, see the response below:
SQL> @apex_epg_config /opt/oracle/product/11.2.0/db1
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
old   1: create directory APEX_IMAGES as '&1/apex/images'
new   1: create directory APEX_IMAGES as '/opt/oracle/product/11.2.0/db1/apex/images'
Directory created.
old 47:     if '&IMGUPG' != '' then
new 47:     if '' != '' then
old 48:         l_mv_folder := '&IMGUPG';
new 48:         l_mv_folder := '';
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:00:31.78
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.Though I moved 1 step forward, but my apex login page (http://<server>:8080/apex/apex_admin => redirected to http://<server>:8080/apex/f?p=4550:10:<session>) refuse to come up as it is now showing "[url https://forums.oracle.com/forums/thread.jspa?threadID=1112378]apex is undefined" error.
I did the installation as [@apexins users users temp /i/] mentioned in the docs, and this is first install not the upgrade.
Any help on this ['apex' is undefined] (javascript error) would be really helpful.
Thanks,
Ash

Why do some webpages not finish loading images when using cellular data instead of WiFi?

I'm using iPhone 6 64gb. The problem existed with iOS 8.0.0 and the iOS 8.0.2 update.
I have had trouble with webpages loading slowly over AT&T LTE. Sites with multiple images frequently have trouble loading all the images entirely. Instead, the unloaded portion of the image fills in with black or the image fails to load at all. If I switch to WiFi when available and refresh the page, the images will usually reload completely. I never had this problem with the iPhone 5s on the same websites.

I'm on AT&T with an iPhone 5 first gen. This problem is happening across iPhone4s al of the way to iPhone6+
Thought it was only affecting newer iPhones with new Graphic Processors but I later ruled that out.
Seems to only be happening on LTE / 4G. Is not affected on WIFI for me.
I clear cache, crash browser and even reset the phone but will still get unexpected results in LTE or 4G.
The images seem to be getting prematurely cached and are only partially rendering.
When I save the these half loaded images in photoshop I get a warning that they are damaged and/or truncated.
I have saved images out as PNG and JPGs renders poorly.
About the images-
These images are only 15k and there are 16 on the page so I can't see why they would get bottlenecked when loading.
also, there is no background-color of black anywhere in the CSS.
Note the TV-Like static on the bottom image similar to the comment ryzer08 above.
NEXT IMAGE.....

Want to smooth loaded images (jpg) in flash8

i want to smooth loaded images (jpg) in flash8
let's say that i have one layer, one frame and the following
AS:
_root.loadMovie("q.jpg");
the _root could be an object, but the behavior is the same
so in flash7 CTRL+ENTER, right click and zoom ---> RESULT:
zoom with image interpolation (like photoshop bicubic resample)
but in flash8 CTRL+ENTER, right click and zoom --->
RESULT: zoom with NO image interpolation (like photoshop nearest
nei ghbor resample)
why?????
i have looked in help but all i can find is somthing refering
about images in the library. I want external jpgs!!!
i have done a slideshow with setable tranzitions (fade, blur,
moving, zoom in/out, external loaded masking)
here is some the important part of the my code (not important
for my problem, but I just want to say that i've worked about 1-2
days and i want to make it better. is frustating that i have blur,
fade, gradient transparency (blending) and not a smooth image):
Gtime=getTimer(); //global timmer
///////////////////////////////ia datele generale, daca cele
particulare lipsesk
/*Ttrans=eval("q.tt")-0;*/
if(eval("q.tt"+pidx))Ttrans=eval("q.tt"+pidx)-0;
/*Tfoto=eval("q.tf")-0;*/
if(eval("q.tf"+pidx))Tfoto=eval("q.tf"+pidx)-0;
/*sv=eval("q.sv")-0;*/
if(eval("q.sv"+pidx))sv=eval("q.sv"+pidx)-0;
/*sk=eval("q.sk")-0;*/
if(eval("q.sk"+pidx))sk=eval("q.sk"+pidx)-0;
/*xv=eval("q.xv")-0;*/
if(eval("q.xv"+pidx))xv=eval("q.xv"+pidx)-0;
/*yv=eval("q.yv")-0;*/
if(eval("q.yv"+pidx))yv=eval("q.yv"+pidx)-0;
/*xk=eval("q.xk")-0;*/
if(eval("q.xk"+pidx))xk=eval("q.xk"+pidx)-0;
/*yk=eval("q.yk")-0;*/
if(eval("q.yk"+pidx))yk=eval("q.yk"+pidx)-0;
/*rv=eval("q.rv")-0;*/
if(eval("q.rv"+pidx))rv=eval("q.rv"+pidx)-0;
/*rk=eval("q.rk")-0;*/
if(eval("q.rk"+pidx))rk=eval("q.rk"+pidx)-0;
/*xbk=eval("q.xbk")-0;*/
if(eval("q.xbk"+pidx))xbk=eval("q.xbk"+pidx)-0;
/*ybk=eval("q.ybk")-0;*/
if(eval("q.ybk"+pidx))ybk=eval("q.ybk"+pidx)-0;
/*xbv=eval("q.xbv")-0;*/
if(eval("q.xbv"+pidx))xbv=eval("q.xbv"+pidx)-0;
/*ybv=eval("q.ybv")-0;*/
if(eval("q.ybv"+pidx))ybv=eval("q.ybv"+pidx)-0;
/*mask=eval("q.mask");*/
if(eval("q.mask"+pidx))mask=eval("q.mask"+pidx);
if(trans==0 && Gtime>Ftime+Tfoto*1000){
//retain values
aux2=(Gtime-Ttime)*100/((Ttrans*2+Tfoto)*1000);
Ttrans2=Ttrans;
Tfoto2=Ttrans;
sv2=sv;sk2=sk;
xv2=xv;yv2=yv;
xk2=xk;yk2=yk;
rv2=rv;rk2=rk;
xbv2=xbv;ybv2=ybv;
xbk2=xbk;ybk2=ybk;
//end retain values
Ttime=Gtime;
trans=1;//transition
if(p=="p1"){
p="p2";pp="p1";
}else{
p="p1";pp="p2";
pidx++;
if(eval("q.p"+pidx)==undefined){
end=1;
//gotoAndStop(6);
}else{
p1.swapDepths(p2);
loadMovie(fotofolder+eval("q.p"+pidx),eval(p+".p.p"));
eval(p)._xscale=eval(p)._yscale=100;
eval(p)._rotation=0;
if(trans==1 && Gtime>Ttime+Ttrans*1000){
Ftime=Gtime;
trans=0;//not transition
//tranzition
if(trans==1){
if(mask.length>3)
eval(p)._alpha=100;
else
eval(p)._alpha=(Gtime-Ttime)*100/(Ttrans*1000);
aux=(Gtime-Ttime)*100/((Ttrans*2+Tfoto)*1000)
eval(p)._x=xv*aux+xk;
eval(p)._y=yv*aux+yk;
eval(p)._xscale=eval(p)._yscale=sv*aux+100+sk;
eval(p)._rotation=rv*aux+rk;
blur.blurX=aux*xbv+xbk;
blur.blurY=aux*ybv+ybk;
eval(p).p.p.filters = [blur];
//intarzierea
aux=aux+aux2;
eval(pp)._x=xv2*aux+xk2;
eval(pp)._y=yv2*aux+yk2;
eval(pp)._xscale=eval(pp)._yscale=sv2*aux+100+sk2;
eval(pp)._rotation=rv2*aux+rk2;
if(!end)gotoAndPlay(_currentframe-1);
////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////

See
http://www.kaourantin.net/2005/12/dynamically-loading-bitmaps-with.html
danredman wrote:
> i want to smooth loaded images (jpg) in flash8
>
> let's say that i have one layer, one frame and the
following AS:
>
_root.loadMovie("q.jpg");
>
> the _root could be an object, but the behavior is the
same
>
> so in flash7 CTRL+ENTER, right click and zoom --->
RESULT: zoom with image
> interpolation (like photoshop bicubic resample)
> but in flash8 CTRL+ENTER, right click and zoom --->
RESULT: zoom with NO image
> interpolation (like photoshop nearest nei ghbor
resample)
>
> why?????
>
> i have looked in help but all i can find is somthing
refering about images in
> the library. I want external jpgs!!!
> i have done a slideshow with setable tranzitions (fade,
blur, moving, zoom
> in/out, external loaded masking)
>
>
> here is some the important part of the my code:
>
> Gtime=getTimer(); //global timmer
>
> ///////////////////////////////ia datele generale, daca
cele particulare
> lipsesk
> /*Ttrans=eval("q.tt")-0;*/
if(eval("q.tt"+pidx))Ttrans=eval("q.tt"+pidx)-0;
> /*Tfoto=eval("q.tf")-0;*/
if(eval("q.tf"+pidx))Tfoto=eval("q.tf"+pidx)-0;
> /*sv=eval("q.sv")-0;*/
if(eval("q.sv"+pidx))sv=eval("q.sv"+pidx)-0;
> /*sk=eval("q.sk")-0;*/
if(eval("q.sk"+pidx))sk=eval("q.sk"+pidx)-0;
> /*xv=eval("q.xv")-0;*/
if(eval("q.xv"+pidx))xv=eval("q.xv"+pidx)-0;
> /*yv=eval("q.yv")-0;*/
if(eval("q.yv"+pidx))yv=eval("q.yv"+pidx)-0;
> /*xk=eval("q.xk")-0;*/
if(eval("q.xk"+pidx))xk=eval("q.xk"+pidx)-0;
> /*yk=eval("q.yk")-0;*/
if(eval("q.yk"+pidx))yk=eval("q.yk"+pidx)-0;
> /*rv=eval("q.rv")-0;*/
if(eval("q.rv"+pidx))rv=eval("q.rv"+pidx)-0;
> /*rk=eval("q.rk")-0;*/
if(eval("q.rk"+pidx))rk=eval("q.rk"+pidx)-0;
> /*xbk=eval("q.xbk")-0;*/
if(eval("q.xbk"+pidx))xbk=eval("q.xbk"+pidx)-0;
> /*ybk=eval("q.ybk")-0;*/
if(eval("q.ybk"+pidx))ybk=eval("q.ybk"+pidx)-0;
> /*xbv=eval("q.xbv")-0;*/
if(eval("q.xbv"+pidx))xbv=eval("q.xbv"+pidx)-0;
> /*ybv=eval("q.ybv")-0;*/
if(eval("q.ybv"+pidx))ybv=eval("q.ybv"+pidx)-0;
> /*mask=eval("q.mask");*/
if(eval("q.mask"+pidx))mask=eval("q.mask"+pidx);
>
>
> /
>
>
> if(trans==0 && Gtime>Ftime+Tfoto*1000){
> //retain values
> aux2=(Gtime-Ttime)*100/((Ttrans*2+Tfoto)*1000);
> Ttrans2=Ttrans;
> Tfoto2=Ttrans;
> sv2=sv;sk2=sk;
> xv2=xv;yv2=yv;
> xk2=xk;yk2=yk;
> rv2=rv;rk2=rk;
> xbv2=xbv;ybv2=ybv;
> xbk2=xbk;ybk2=ybk;
> //end retain values
> Ttime=Gtime;
> trans=1;//transition
>
> if(p=="p1"){
> p="p2";pp="p1";
> }else{
> p="p1";pp="p2";
> }
> pidx++;
> if(eval("q.p"+pidx)==undefined){
> end=1;
> //gotoAndStop(6);
> }else{
> p1.swapDepths(p2);
> loadMovie(fotofolder+eval("q.p"+pidx),eval(p+".p.p"));
> eval(p)._xscale=eval(p)._yscale=100;
> eval(p)._rotation=0;
> }
> }
> if(trans==1 && Gtime>Ttime+Ttrans*1000){
> Ftime=Gtime;
> trans=0;//not transition
> }
> //tranzition
>
> if(trans==1){
> if(mask.length>3)
> eval(p)._alpha=100;
> else
> eval(p)._alpha=(Gtime-Ttime)*100/(Ttrans*1000);
> }
> aux=(Gtime-Ttime)*100/((Ttrans*2+Tfoto)*1000)
> eval(p)._x=xv*aux+xk;
> eval(p)._y=yv*aux+yk;
> eval(p)._xscale=eval(p)._yscale=sv*aux+100+sk;
> eval(p)._rotation=rv*aux+rk;
> blur.blurX=aux*xbv+xbk;
> blur.blurY=aux*ybv+ybk;
> eval(p).p.p.filters = [blur];
> //intarzierea
> aux=aux+aux2;
> eval(pp)._x=xv2*aux+xk2;
> eval(pp)._y=yv2*aux+yk2;
> eval(pp)._xscale=eval(pp)._yscale=sv2*aux+100+sk2;
> eval(pp)._rotation=rv2*aux+rk2;
>
> if(!end)gotoAndPlay(_currentframe-1);
>

How do I make a loader image similar to those shown at program opening?

I'm looking to build a loader image, that opens up at the start of my script, and automatically closes after a few seconds. I opened up the image processor script to see how Adobe has added images to alerts, but it's an extensive doc, and I couldn't tell where the image was being pulled from, as the variable only shows up twice, and is only called, and not set. Also is there another method other than alert to call a box like this? I would prefer it have no buttons.

I was able to boil your script down, to what I need. Works great in extendscript, but for some reason, only shows a portion of the image in photoshop and illustrator. This was happening even before i boiled it down. Thoughts? The last thing I'm trying to do with it, is figure out if I can set a transparent background for the window. I also tried using backgroundColor, but was unable to set the attribute correctly... there is a lot to learn with Adobe scripting. I also couldn't find reference to what DELTA_H is, I have a bunch of their PDFs, and googled, but couldn't find reference to this. I'm trying to be resourceful so I don't have to ask such remedial questions.
Here's the revised script, and a link to the image I labelled test on my desktop: http://img2.wikia.nocookie.net/__cb20110725041802/logopedia/images/8/89/Logo_rolling_stone s.png
PreviewWindow = function() {
w = 285;
h = 313;
PreviewWindow.DELTA_H = 1;
PreviewWindow.open = function(file, w, h, title, ms) {
PreviewWindow.openFile(file, w, h, title, ms);
PreviewWindow.openFile = function(file, w, h, title, ms) {
var type = (ms > 0) ? 'palette' : 'dialog';
var win = new Window(type, title || "Preview: " + decodeURI(file.name),undefined,{borderless : true});
win.preview = win.add('image', undefined);
win.preview.icon = file;
win.show();
if (ms > 0) {
$.sleep(ms);
delete win;
$.gc();
PreviewWindow.open("~/Desktop/test.png", undefined, undefined,
"Preview Test", 500);

Why doesn't my Yahoo toolbar appear? One ..what is theday i opened Mozilla and my yahoo toolbar refused to load...it's stuck on Refresh mode and now all that i can see is the little cogwheel which refreshed the toolbar...that is hidden :|...

my Yahoo toolbar refuses to load...I can only see the little cogwheel which only refreshes the toolbar...when it is present :|...I am sending u an image with my problem
[url=http://img215.imageshack.us/i/92069355.png/][img][/img][/url]

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

Photoshop refuses to load images.

Similar Messages

Maybe you are looking for