Photoshop slow when volumes are mounted

A few people are reporting this problem over on the Adobe forums, thought maybe someone here might be able to shed some light.
Essentially, Photoshop CS2 is very slow to open files whenever network volumes are mounted. Even if the files are local, just having mounted volumes slows it down. A file that normally opens instantly can take up to 30 seconds.
It's only PSCS2 which slows, all other programs seem fine.
It appears the problem occurs only with AFP connections.
Any ideas? Photoshop bug or OS bug?
Here's the forum thread if anyone's curious...
http://www.adobeforums.com/cgi-bin/webx?[email protected]@.3bbcb3c3/0

Aaron,
It is particularly slow if you have iDisk mounted and set to automatically sync. If you have iDisk mounted try switching it to Manual Sync and PhotoShop's Open dialogue box will work faster.
I've tried it both ways and I've reverted to having Auto Sync enabled because I prefer the benefits of that over the inconvenience of the slow Open dialogue box. Also, PhotoShop is only slow with its dialogue box for the first time that dialogue box is used since the app was launched. Thereafter it is fine. As I leave PhotoShop launched most of the time this is not an issue.
Michael

Similar Messages

Client access issues when mailboxes are mounted on a specific mailbox server

One of our 3 mailbox servers gives us an error when mailbox databases are mounted on it.
All web services are not functioning properly, there is an event log error for each web service web.config file saying file not found, If I open each web.config file and look at the line in question they all point to:
<assemblies>
<add assembly="Microsoft.Exchange.Security, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</assemblies>
Does anyone know what this is pointing at or what my server is missing?
It is Exchange 2013 Sp1 RU7 as are my other 2 mbx servers which work fine...
all pre-req's are installed as I double checked and no difference between the 3 mbx servers that I can see...
***Don't forget to mark helpful or answer***

IIS error
=== Pre-bind state information ===<o:p></o:p>
LOG: DisplayName = Microsoft.Exchange.Security, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35<o:p></o:p>
(Fully-specified)<o:p></o:p>
LOG: Appbase = file:///C:/Program Files/Microsoft/Exchange Server/V15/ClientAccess/Autodiscover/<o:p></o:p>
LOG: Initial PrivatePath = C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Autodiscover\bin<o:p></o:p>
Calling assembly : (Unknown).<o:p></o:p>
===<o:p></o:p>
LOG: This bind starts in default load context.<o:p></o:p>
LOG: Using application configuration file: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Autodiscover\web.config<o:p></o:p>
LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet.config<o:p></o:p>
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\config\machine.config.<o:p></o:p>
LOG: Post-policy reference: Microsoft.Exchange.Security, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/Temporary ASP.NET Files/autodiscover/b455e468/cbaac37d/Microsoft.Exchange.Security.DLL.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/Temporary ASP.NET Files/autodiscover/b455e468/cbaac37d/Microsoft.Exchange.Security/Microsoft.Exchange.Security.DLL.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft/Exchange Server/V15/ClientAccess/Autodiscover/bin/Microsoft.Exchange.Security.DLL.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft/Exchange Server/V15/ClientAccess/Autodiscover/bin/Microsoft.Exchange.Security/Microsoft.Exchange.Security.DLL.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/Temporary ASP.NET Files/autodiscover/b455e468/cbaac37d/Microsoft.Exchange.Security.EXE.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/Temporary ASP.NET Files/autodiscover/b455e468/cbaac37d/Microsoft.Exchange.Security/Microsoft.Exchange.Security.EXE.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft/Exchange Server/V15/ClientAccess/Autodiscover/bin/Microsoft.Exchange.Security.EXE.<o:p></o:p>
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft/Exchange Server/V15/ClientAccess/Autodiscover/bin/Microsoft.Exchange.Security/Microsoft.Exchange.Security.EXE.<o:p></o:p>
***Don't forget to mark helpful or answer***

My internet is really slow when others are using i...

Hey my internet is really slow when other people use it.
Also it is a problem when i'm xbox live, i'll be playing a game and when someone else in the house is on BBC i player, it skips like mad and its so frustrating to play on, in fact its unplayable.
I just want to know if there is a way to fix this,
I have BT broadband and i have the black hub.
I have no ideas about computers and internet so i really dont know what to do about this!
any help would be much appreciated, thank you xx

thank you,
here are my results from the hub;
ADSL line status
Connection Information
Line state Connected
Connection time 7 days, 00:33:53
Downstream 1,824 Kbps
Upstream 448 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Interleaved
Noise margin (Down/Up) 14.8 dB / 14.0 dB
Line attenuation (Down/Up) 55.7 dB / 31.5 dB
Output power (Down/Up) 2.8 dBm / 1.3 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 1627 / 261
CRC Errors (Down/Up) 385 / 189
HEC Errors (Down/Up) 1544 / 147
Error Seconds (Local/Remote) 279 / 95
and here are my results from the speed test
1. Best Effort Test: -provides background information.
Download Speed
1143 Kbps
0 Kbps 2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1143 Kbps
For your connection, the acceptable range of speedsis 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1824 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1250 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 12.94:24.68:62.38 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
364 Kbps
0 Kbps 448 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 364 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

HDV 1080p30 very slow when files are from Shake

Hi,
I have a totally tricked out 8 core Mac pro with 8 GB ram and a 1 TB drive (mostly empty). I'm using the Latest FCP. Recently, I've been editing some HD video that I've shot and have been quite pleased with the performance of the machine/software. However, I am experiencing a weird problem. I also have Shake, which I am using to do some composting and, relevantly, remove a small amount of camera vibration from my footage. (It works great.)
However, any files that I export from Shake, using (as best as I can tell) the exact same file formats and codecs that my imported Raw (unprocessed in Shake) video is. That is: they are quicktime files, Using HDV 1080p30fps, with 29.97 FPS "drop frame" codec. While the raw imported files work great, the files I export from Shake and put into my timeline result in a "Spinning Ball" whenever I do anything at all to them- play them, move the timeline around, cut, apply a filter etc,. What am I overlooking?
Brad Hoehne

Hi Kunal
Let me explain to you how this works
When you archive the data, it moves out of the database into a flat file which is latter stored on optical disk/hard disk etc depending upon your archiving solution
When archving is done, it also creates an index ( depending upon how your have configured the object) This index is of few common fields of the archived objects . This is than stored within SAP. When you call SARI you seen this indexed data from SAP and hence the response is quick. At this point it does not get the data from your archives
When you call it through the transaction FBL.. , it needs all the fields ( which are not avl in the indexed data ) and hence SAP has to go to the archives to fetch it
This results in slowing it down.
Now how slow will it be is a difficult question for us to answer as a lot denpends upon your archiving solution and how much data are you trying to fetch
As far as memory problem is concerned you need to analsye the dump as to where ( on what buffer parameter is it failing) Depending upon that you will have to either increase memory parmeters OR reduce the amount of data your a fetching
Thanks
Naushad

HT4623 downloading is very slow,when we are downloading the updates

Downloading of the updates is very slow

What kind of updates? Are you connected to wifi or cellular data? What is the signal strength you are dealing with? Lots of reasons things could run slow.

Why is scrolling so slow when pages are enlarged?

This program is frustrating, it takes forever to scroll up and down when the text page is enlarged. How can this be fixed?

I'm having the same problem
using DE on mac air---scrolling is hopelessly slow and also beeps if I press the forward arrow to try to turn pages.
any suggestions on how to get this working?

USB 3 external drive volume not mounting on restart

I've bought an external USB 3 full size hard drive enclosure case and put in a 2TB drive. The drive is partitioned into 3 volumes. I've noticed from time to time that the volumes have gotten dismounted some how. If I unplug the USB cable and plug it back in the volumes mount again. After a long time I finally figured it out that what's really happening is that the volumes are not mounting when I do a restart, I just didn't notice it before. Once the volumes are mounted they stay mounted until the next restart. I replaced the enclosure and cable with a different and more expensive brand but that didn't make a difference. No matter what I do the volumes never mount on restart.

I think this might be due to the fact that my iMac as a fusion drive and it boots so fast that the exteranl drive isn't finished starting up when OS X is looking for drives durring it's bootup.

SSAS Tabular. MDX slow when reporting high cardinality columns.

Even with small fact tables( ~20 million rows) MDX is extremely slow when there are high cardinality columns in the body of the report.
e.g. The DAX query is subsecond.
Evaluate
SUMMARIZE (
CALCULATETABLE('Posted Entry',
'Cost Centre'[COST_CENTRE_ID]="981224"
, 'Vendor'[VENDOR_NU]="100001"
,'Posted Entry'[DR_CR]="S")
,'Posted Entry'[DOCUMENT_ID]
,'Posted Entry'[DOCUMENT_LINE_DS]
,'Posted Entry'[TAX_CODE_ID]
,"Posted Amount",[GL Amount]
,"Document Count",[Document Count]
,"Record Count",[Row Count]
,"Document Line Count",[Document Line Count]
,"Vendor Count",[Vendor Count]
order by
'Posted Entry'[GL Amount] desc
The MDX equivalent takes 1 minute 13 seconds.
Select
{ [Measures].[Document Count],[Measures].[Document Line Count],[Measures].[GL Amount], [Measures].[Row Count],[Measures].[Vendor Count]} On Columns ,
NON EMPTY [Posted Entry].[DOCUMENT_ID_LINE].[DOCUMENT_ID_LINE].AllMembers * [Posted Entry].[DOCUMENT_LINE_DS].[DOCUMENT_LINE_DS].AllMembers * [Posted Entry].[TAX_CODE_ID].[TAX_CODE_ID].AllMembers On Rows
From [Scrambled Posted Entry]
WHERE ( [Cost Centre].[COST_CENTRE_ID].&[981224] ,[Vendor].[VENDOR_NU].&[100001] ,{[Posted Entry].[DR_CR].&[S]})
I've tried this under 2012 SP1 and it is still a problem. The slow MDX happens when there is a high cardinality column in the rows and selection is done on joined tables. DAX performs well; MDX doesn't. Using client generated MDX or bigger fact tables makes
the situation worse.
Is there a go fast switch for MDX in Tabular models?

Hi,
There's only 50 rows returned. The MDX is still slow if you only return a couple of rows.
It comes down to the DAX produces a lot more efficient queries against the engine.
FOR DAX
e.g.
after a number of reference queries in the trace the main vertipaq se query is
SELECT
[Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_ID], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_LINE_DS], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[TAX_CODE_ID],
SUM([Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[POSTING_ENTRY_AMT])
FROM [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1]
WHERE
([Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_ID], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_LINE_DS], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[TAX_CODE_ID]) IN {('0273185857', 'COUOXKCZKKU:CKZTCO CCU YCOT
XY UUKUO ZTC', 'P0'), ('0272325356', 'ZXOBWUB ZOOOUBL CCBW ZTOKKUB:YKB 9T KOD', 'P0'), ('0271408149', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 7.3ZT BUY', 'P0'), ('0273174968', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT KBW', 'P0'), ('0273785256', 'ZOUYOWU ZOCO CLU:Y/WTC-KC
YOBT 3ZT JXO', 'P0'), ('0273967993', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT KCB', 'P0'), ('0272435413', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT BUY', 'P0'), ('0273785417', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT BUY', 'P0'), ('0272791529', 'ZOUYOWU ZOCO CLU:Y/WTC-KC
YOBT 7.3ZT JXO', 'P0'), ('0270592030', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 89.3Z JXO', 'P0')...[49 total tuples, not all displayed]};
showing a CPU time of 312 and duration of 156. It looks like it has constructed an in clause for every row it is retrieving.
The total for the DAX query from the profiler is 889 CPU time and duration of 1669
For the MDX
after a number of reference queries in the trace the expensive vertipaq se query is
SELECT
[Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_ID_LINE], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_LINE_DS], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[TAX_CODE_ID]
FROM [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1]
WHERE
[Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DR_CR] = 'S';
showing a CPU time of 49213 and duration of 25818.
It looks like it is only filtering by a debit/credit indicator .. this will be half the fact table.
After that it fires up some tuple based queries (similar to the MDX but with crossjoins)
SELECT
[Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_ID_LINE], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_LINE_DS], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[TAX_CODE_ID]
FROM [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1]
LEFT OUTER JOIN [Vendor_6b7b13d5-69b8-48dd-b7dc-14bcacb6b641] ON [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[VENDOR_NU]=[Vendor_6b7b13d5-69b8-48dd-b7dc-14bcacb6b641].[VENDOR_NU]
LEFT OUTER JOIN [Cost Centre_f181022d-ef5c-474a-9871-51a30095a864] ON [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[COST_CENTRE_ID]=[Cost Centre_f181022d-ef5c-474a-9871-51a30095a864].[COST_CENTRE_ID]
WHERE
[Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DR_CR] = 'S' VAND
([Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_ID_LINE], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[DOCUMENT_LINE_DS], [Posted Entry_053caf72-f8ab-4675-bc0b-237ff9ba35e1].[TAX_CODE_ID]) IN {('0271068437/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 7.3ZT ZTC', 'P0'), ('0272510444/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT KBW', 'P0'), ('0272606954/1', null, 'P0'), ('0273967993/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT KCB', 'P0'), ('0272325356/1', 'ZXOBWUB ZOOOUBL CCBW ZTOKKUB:YKB 9T KOD', 'P0'), ('0272325518/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT KUW', 'P0'), ('0273231318/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 7.3ZT ZWB', 'P0'), ('0273967504/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT KBW', 'P0'), ('0274055644/1', 'YBUCC OBUC YTT OYX:OD 5.3F81.3ZT TOZUT', 'P5'), ('0272435413/1', 'ZOUYOWU ZOCO CLU:Y/WTC-KC YOBT 3ZT BUY', 'P0')...[49 total tuples, not all displayed]};
This query takes 671 CPU and duration 234; more expensive than the most expensive part of the DAX query but still insignificant compared to the expensive part of the MDX.
The total for the MDX query from the profiler is 47206 CPU time and duration of 73024.
To me the problem looks like the MDX fires a very expensive query against the fact table and only filters by 1 element of the fact table; then goes about refining the set later on.

I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 297
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
    [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [not loaded]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    com.adobe.fpsaud.plist [Click for support]
    [not loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [not loaded]    com.logmein.raupdate.plist [Click for support]
    [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    HP Product Research    Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 10.0.1 [Click for support]
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    ocspd
         4%    WindowServer
         1%    kextd
         0%    ps
         0%    securityd
Top Processes by Memory: ℹ️
    137 MB    Microsoft Word
    120 MB    Safari
    86 MB    ocspd
    82 MB    CalendarAgent
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    310 MB    Free RAM
    1.89 GB    Active RAM
    1.55 GB    Inactive RAM
    544 MB    Wired RAM
    1.13 GB    Page-ins
    8 KB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 09:32:47 AM    Self test - passed
    Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
    Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
    Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

How do I control the state of folder chevrons when a volume is mounted?

When my users mount a server, they inherit the chevron settings of a previous user. Sometimes that previous setting has a chevron turned down on a big folder. That results in long mount times over Internet connections. It is also confusing to the users to have the server view change on mount from day to day as other people change the configuration.
Does anyone know how to control the chervon settitngs of folders on a mounted server?
Rob

You may find it useful to just disable .DS_Store files all together for network volumes.
You can run this command on the client machines to tell them not to write .DS_Store files on a network volume.
defaults write com.apple.desktopservices DSDontWriteNetworkStores true
You could then find and remove all .DS_Store files on the network volume you are sharing out.
find /Volumes/Shares/YourSharePoint -name .DS_Store -exec rm {} \;

Hard drive volume appears in sidebar Favorites when new disk mounts

Hard drive on my 17” MacBook Pro Quad Core i7 (2.5 GHz, 8GB SDRAM OS 10.8.2) is partitioned into 4 volumes; I'll call them A-Mountain Lion startup drive, B-Personal, C-Work, D-minimal clean Mt. Lion for emergencies. Problem relates to my regular boot drive.
I have Finder sidebars set to show 8 or 10 folders in the "Favorites" section and have ticked all boxes in the "Devices" section. Most of the time I have no external disks, CDs, etc., connected to the MBP, so the Devices section generally shows my computer and the four partitions. So far, so good.
Lately, every time an external volume is mounted and every time a disk image is mounted, the Personal volume (B) of my internal drive, which is already showing under Devices, also pops up in the Favorites section of the sidebar. I remove it from the Favorites, but the next time an external disk or a disk image mounts, there it is again. It's always volume B, never A, C, or D.
I have tried everything I can think of to cure this odd behavior: Used Disk Utility (verify all disks/volumes; repair volumes; repair permissions; etc.), though nothing seemed wrong. I've run Disk Warrior on all volumes. I cleaned out everything possible on the startup drive (A) with the latest version of Onyx. I've repeatedly trashed the plists I could identify in my user Library that had "sidebar" or "finder" in their names. I've logged in and out; started and restarted; started with shift key down. Still, every time a new volume or disk mounts, up pops this extra volume B among the Favorites (where it shouldn't be). I checked and unchecked various combinations of sidebar items in Finder Preferences. I've Forced Quit the Finder. It doesn't matter whether all, some, or no devices are checked; when a new disk mounts, there's the extra volume B again.
I have only two other clues to add. (1) I created a new temporary user account on my startup drive (volume A), and this behavior did NOT occur in the new account. (2) This same behavior had arisen once before, a couple of months ago. I went through similar blind attempts to cure it then, but at some point I must have done something right because I it got fixed. For the life of me, I can't remember which of all the things I tried did the trick.
Many thanks to anyone who can shed light on this annoying behavior.

I can add a bit to my earlier description. I had said the problem did not occur in a new user account. Well, after using the new account for a while, it showed up. Eventually I erased the startup volume and installed Mountain Lion (plus updates to 10.8.2) fresh. I used migration assistant to transfer only my old user, pared down applications, and network settings -- no preferences, application support stuff. The old user carried over the problem. But I immediately created a new user and have been working from it for the past two weeks, very gradually opening apps, adjusting settings, etc., and testing for the anomaly at each change. In some cases I did move preferences from a backup clone, but was always careful to test after each addition. All was well for a week, until one morning I noticed the data partition had appeared in sidebar Favorites. So I'm back to where I was. I had been documenting each change or introduction I made. The only things my notes said from the day before the sidebar anomaly appeared was launching and struggling to activate QuarkXPress 9.3, and copying over my old prefs and settings for TextWrangler. I completely removed every trace of QXP, but the problem remained. (I did not remove TextWrangler because I just can't believe it could be the culprit -- but could it?)
I also noticed a similar (though maybe not identical) problem posted in another thread <https://discussions.apple.com/message/20591050#20591050>, but so far no answers there either.

My ipod 5th gen won't change volume when headphones are plugged in, but when they are not I can change the volume on the speaker. How do I fix this?

My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker. How do I fix this?

Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock

I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as

I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as a PDF. Can anyone give me some tips on how to fix this? Thanks!

Ask in the program forums
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Photoshop slow when volumes are mounted

Similar Messages

Maybe you are looking for