Photoshop starts on dev PC, but not anywhere else
Hello all,
I am developing a Photoshop plug-in, and it runs ok on my development PC. However, when I try to test the plug-in on other PCs, it does not even appear in the Filter list?!
To install it, I did the same thing I did on my development PC, i.e. creating a directory in the Plug-in folder, and copy the plugin in there. Works ok in the dev PC, but not anywhere else?! Any idea why that could be the case? Is it possible to make Photoshop generate a log of some kind to get more info on the problem?
Thanks in advance
Alex
Hi Toby Thain
Could you please show me a hint for a problem from Photoshop Plug-In ?
How I can create a Photoshop Plug-in by using C Carbon on Macintosh OS?
You can contact me via mail: [email protected]
[email protected]
Thanks for your attention
ThuongDN
Similar Messages
-
Songs that I have purchased and downloaded show in the Playlist folder under "Purchased", but not in the Library under Artist, Album etc:. What do I need to do to have them show under Artist, etc;?
Download the free iTunes Single of the Week...
Sounds a bit voodoo I know, but it has a good strike rate.
tt2 -
3G can catch wifi in apple store but not anywhere else
So I upgraded my 3G to OS4.0 a few weeks ago and like many others have experienced, my wifi has gone DEAD right after the upgrade. No networks show up whatsoever. I have spent hours going through this forum and google, only to find out that there's no solution for it and some have even resorted to putting the phone in the freezer
I was just about to give up on the problem thinking it's a hardware issue, but today I happen to pass an apple store. I explained my problem to one of the Apple consultants and as soon as he touched it there was the wifi!!! He didn't understand why it didn't work at my dorm (on college campus) and told me to come back and try.
So here I am back at my dorm again with the same old problem - it can't find any wifi. This is getting really frustrating and I do hope I can find a solution for it. The fact that it worked at Apple Store shows that it's not a hardware issue, but what is it!!! It was able to find my campus network before I upgraded it, so I don't think it has anything to do with campus network having a weak signal. Arghhhh I hate apple. If anyone knows how to solve this please please let me know.So I tried using my macbook pro to share internet to the iphone, and the phone can detect the network! I'm guessing my campus network and several hundred other networks around me are too far to be detected? But how close must you be for it to work!? it's unbelievable that I live right in the city where there are hundreds of wifi detected on my laptop but none on my iphone
-
How to delete iPad/iphone apps on laptop but not anywhere else?
Hi,
i'm trying to free up room on my Macbook Air, and delete tv show episodes and large apps from itunes. When I hit delete it says
"Are you sure you want to delete the selected TV show from your iTunes library? This TV show will also be deleted from any iPod, iPhone, or iPad that synchronizes with your iTunes library."
Which i don't want - Ijust need the space back on my Macbook Air. How do I delete selectively?
Thanks for your help.Welcome to Apple Support Communities
Do not worry about apps. If you delete them from iTunes, you will keep them on the iPhone, iPad and/or iPod touch and you will not get them deleted when you sync them.
However, respecting to TV shows, you will get them deleted when you sync your devices with iTunes. The only way to prevent this would be to transfer them to your MacBook, which you do not want to.
Another solution you have is to move the iTunes library to an external drive, so you do not have to delete anything and you will get free space. Also, it is good to keep a copy of your apps and TV shows on your Mac in case you need to copy them back to your devices -
I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.
If you are using a Mac, simply hit Command-Spacebar to bring up Spotlight Search. Begin typing the name of the application and when you see what you are looking for, press enter. You should get a hit by the second or third letter you type. Great way to launch apps on computers that you are not familiar with.
Windows 7 and 8 should have something similar. I think you simply press the Windows key and begin typing. Press enter when you see a match.
Both Mac and Windows search tools can be customized to search for applications, files, emails and so forth. For Windows, look for Taskbar and Start Menu Properties. For Mac, go to Preferences Spotlight. Turn off items you know you won't need to speed up searches.
Make Windows 7 Start Menu Search Find Your Applications Faster -
I am using a PXI chassis with 10 6115's and a 6608 counter/timer. I need to use analog triggering on one of the 6115 AI channels. The particular channel will depend on the test setup, so I can't just pick one and hard-wire it. This analog trigger will be the master timing reference for all of the boards.
However, I need to trigger the 6115's at different times (e.g., trigger three at the same time and seven at some later time) so I'm routing the AI Start Trigger from whichever is the trigger channel (one of the first 16 channels) to RTSI0. The first five counters are then GATEd on RTSI0 and the counter OUTs are hardwired to the 6115's PFI0s in groups of two. So,
basically, one of the 6115s sends AI Start Trigger to the five counters which, in turn, generate five delayed triggers that are sent to the 10 6115's.
My problem is that I can't use a zero delay on the counter, so I can't get the 6115s to trigger at the same time, if need be. Whichever one generats the analog trigger will always be slightly ahead of all of the others that I would like to trigger at the same time.
So my question is this: can I somehow force one of the 6115's to generate the AI Start Trigger across RTSI0 but not actually trigger itself until it gets the trigger back from the counter/timer? This way, the delay will still be there but all of the boards can get a simulataneous trigger if need be.
Thanks,
RGARGA,
Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
Spencer S. -
Bought Photoshop CC and Lightroom 5 but not able to download
bought Photoshop CC and Lightroom 5 but not able to download. while the creative cloud kept update of Photoshop CC but I'm unable to open it.
do you have a 64 bit os?
if yes, use a different browser.
if no, those apps are 64 bit only. -
I use the operating system Mac os x 10.10.2 and would like me like to purchase Adobe Photoshop Elements 13 am with but not sure because is specified in the system requirement only os x 10.9. Can you help me?
Yes, it works. Download the trial and see for yourself. Adobe never updates the system requirements after any version is released, so that is what was available last Sept. when PSE 13 was released.
-
I want to download ancient Photoshop 4.0 or followings, but not as modern than the CS`s. Is that possible???
They were on CD even as trials, the save/print functions were disabled. There was no "unlock code". The commercial version was the only fully functional version.
So, no. there are no 4 to CS versions available on Adobe's servers. -
Photoshop opens from the finder but not the photo.
When I click on a photo in the finder, photoshop will open but not the photo. I have to open the photo THROUGH PHOTOSHOP. Not a big deal but terribly annoying and time consuming. Not sure what changed recently to cause this issue. I have jpegs and psds set to open with Photoshop—no problem there, just no photo when Photoshop boots up.
Select the photo then press COMMAND-I to open the Get Info window. In the Open With section select Photoshop from the Default drop down menu. If you wish to apply this to all such files then click on the Change All button.
-
when i click the firefox icon to open firefox it pops up a box that says that firefox is running but not responding. i open taskmager to close the firefox process but there is no firefox process listed. i restart my computer and get the same result. firefox appears to still be running but not responding even after a restart. i even tried a cold boot ad got the same results. performed a full virus scan and excep for some tracking cookies it came up negative. i deleated the firefox kernal and downloaded a new copy and installed it. got same problem.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
I can compile objects with SQL dev tool but not with a direct sql
hi,
This is a bit weird - I'm probably not familiar enough with Oracle's compilation process...
I'm creating a some functions / procedures / triggers. When I run the script to create them with Oracle's SQL Developer tool, usually they become immediately valid, and if not then I can manually right click them and choose Compile, and they're compiled correctly and become valid.
However, when running them with command line tools, they're uncompiled after created. I'm trying compile them with
ALTER PROCEDURE / FUNCTION / TRIGGER MySchema.MyFunction COMPILE;
and it always returns
Error starting at line 1 in command:
alter function MySchema.MyFunction compile
Error report:
SQL Command: alter function
Failed: Warning: execution completed with warning
alter function MySchema.MyFunction succeeded.
and the object remains uncompiled / invalid.
also tried with DBMS_... utils and got the same results.
Same with adding things such as PLSQL_WARNINGS = 'ERROR:ALL' to the stmt
But when I go in SQL Developer to the object, right click and click Compile, it compiles fine w/o warnings / errors and becomes valid.
Is there anything else I should run other than this alter..compile? Is SQL Dev tool doing something different than "alter function ... compile" when right clicking and object and clicking "Compile"?
thanks!hi,
I'm having difficulties connecting with SQL Plus, since it seem to require at startup some admin user/password, which I don't have at the moment. Also tried to give it in command line the db name and params and it still require this pass... Will try to get it...
But again, when I'm right clicking the object in SQL Developer and click Compile, it compiles fine and becomes valid. After doing that, running
alter function mySchema.MyTestFunction compile;
passes with
"alter function mySchema.testfunction succeeded"
If I run this sql before doing compile with SQL Developer, it fails with what I posted before.
I wonder if SQL Developer does things other than the above compile stmt.
If I right click on Functions in SQL Dev and click Compile All or Compile Invalid, I can see the sql it about to generate, and it's the same as I tried - and fails as well... Only when right clicking the object and Compile it works...
A test func I tried, for example:
create or replace
FUNCTION testFunction(n in number)
RETURN NUMBER
IS
BEGIN
RETURN n + 1;
END; -
Report Generation working on Dev machine but not on Deployment + Lessons learned
I don't do deployments very often with Teststand. But I have to say, I learned a lot from this one from trial and error and help from the message board. I have got my deployment to final work (almost) with these lessons learned:
1. Create a base installer for the engines and drivers, that way if you need to update it is much smaller.
2. Dont install Teststand before Labview on a new development machine (not related to this deployment but I did learn that)
3. Don't have your Testexec window open, alter the Station Globals, then close the window. It just puts them back to the old version (probably my biggest problem).
4. Paths are extemely important.
I think I have figured it out with much time involved and kept notes of what I have done for future. The ONLY issue I have left is this below. My dev machine works as it should but when I deploy, it does not. FYI- I manually copied over Station Globals, Process model, and Testexec. DO I need something else?
I create serial numbers for my UUT's in the proceses model. It all works fine in development. The serial numbers are generated and the UUT filename is titled [023232232].txt and changes per unit. The path for example lets say is C:\Users\Ryan\Desktop\temp. A logfile is generated for each and put in that folder.
When I deploy, it does something different. Instead of putting the files into the temp folder, it errors out saying it is in use. If I delete the temp folder, it creates a file called "temp" which contains my text logfile. This file just keeps getting overwritten.
Any ideas on this?Hi SimpleJack,
One way you can ensure that the Report Options you want to have stay with your sequence file is to actually override them using a Sequence File Callback. I have attached a link to a KnowledgeBase article that walks you through how to add the ReportOptions callback to your sequence and programmatically set the options that you would normally set by going to Configure»Report Options from the Sequence Editor.
Also, to ensure that the correct Process Model is being used with your sequence file after distributing, you can set the Process Model within the Sequence File Properties. This can be found by going to Edit»Sequence File Properties, and then going to the Advanced tab. I have attached a screenshot of this window below, as well. From here, you can set the Model Option to Require Specific Model, which especially comes in handy if you are using your own custom Process Models.
I hope this helps, SimpleJack! Have a great day!
How Can I Programmatically Enable or Disable Database Logging or Report Generation?
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support -
Photoshop launches in Admin account but not in User account??
My 2007 Mac Pro is working fine. Just installed 10.6.7 on freshly wiped HD in Bay #2. Used the migration feature to bring over everything from drive in Bay #1 (which runs 10.5.8). After that: Photoshop CS5 will not launch (on either drive) under the regular user account. Throws 2 messages as follows: "Cannot find scratch disk because disk is unavailable." Then: "Cannot initialize because disk is unavailable."
But - just logged in on my Admin account on the Snow Leopard drive. I then tried (for the first time ever, I think) to launch PS CS5 just to see what would happen. The app launched normally!
This after:
1. using Adobe uninstaller to remove "original" install of PS CS5 from the Snow Leopard drive. Then reinstalling. (first reinstall of THREE). This did not work to make the app launch, still got above messages.
2. Ran permission repairs (I know - you don't have ta tell me.)
3. Ran DiskWarrior - applied new directory to both Leopard and Snow Leopard drives.
4. I then called Adobe support. Let the agent connect to my desktop from where he did another un-install & re-install using downloaded Adobe utility app. (A guy in India ran my Mac Pro in Michigan for 30 minutes while I sat there, entering Admin password when needed for the operations. Amazing.) He also performed Adobe diagnostics. All without success (on the User account).
After that, he gave up and arranged for a higher level agent to call me tomorrow (Wed. 4/13).
5. Adding: during the above Adobe effort, it came to me that I have too many versions of Photoshop. (I had CS, CS3, CS 4 and CS 5.) So - I systematically removed all versions except the original CS from both the Leopard and Snow Leopard drives. I used AppDelete for this removal, hoping to get all pref files, etc. I even deleted an old version of Acrobat - just because I no longer need it. Then I ran DiskWarrior again and used PreferentialTreatment to check for bad prefs: then again installed CS 5 again - on both drives. (Still working in my normal User account.)
6. Adding: all along, I had no trouble launching and using Photoshop Elements 8 on either drive. I had originally set the PSE scratch disk to my RAID storage drives (Bay #3 & #4). So I was sure by then that I had forgotten to apply the same designation for scratch disk of Photoshop CS5. This was the only variable or possibility I knew of at the time. Guessing: I had set CS 5 to use the drive I wiped clean for Snow Leopard and that's why it came up with: "drive not available."
Repeating: it was not until I logged into my Admin account on the Snow Leopard drive and found I could launch Photoshop from that account that I decided to check in here with my question:
Q. What is the remedy for having one account which won't allow launch for some (in this case, just ONE) apps?
Sorry to be long-winded: this was a major, day-long effort and I want to provide a complete picture of what was done to trouble shoot. Thanks in advance for any help.1. Standard procedure is to do all but a few operations from Standard User accounts: which I have always done. All software installations have been from my original Standard User account.
Actually, most people use their admin accounts for things like installs, and some apps may not be installable from a standard account or may not function properly there, unless they can authenticate to admin privileges to install things in places standard users don't have access.
several complete uninstalls followed by an equal number of reinstalls FROM the original CS 5 install disk made no difference: when in the Standard User account. CS 5 DOES work under the Admin account on the new Snow Leopard installation (on Bootable Drive #2).
That matches with my experiences with Photoshop Elements... it only works if you've got admin privileges, unless you figure out what items are inaccessible from a standard user account and change their permissions.
I'm sure most experienced users would say that sticking with a Regular User account for daily operations is best.
In reality, that's not as prevalent as it probably should be. In part, that may be because of other software that similarly doesn't run on a standard account. In addition, running on an admin account really isn't as much of a risk as it might seem. I finally gave up years ago on using a standard account, and have never had a problem as a result of using an admin account for day-to-day operations. The stuff you can least afford to lose - ie, your documents - you have full access rights to in a standard account anyway, making your data no safer. It's easier to bork the system in an admin account, but the system is easily replaced.
I have seen (here and elsewhere) that creating a new Reg User account is the remedy when something suddenly won't work
That is true, but it's not a magic wand. In this case, though, I don't think that's likely to help. You're welcome to try it, but I highly recommend doing so in a non-destructive way, so that you can easily switch back to your regular account if it doesn't work. -
when i startup PS then i look two minutes to the startup-logo en see that my memory is being checked.
how can i disable this memory chek in PS?
this problem started a few days ago en this version off PS is working on my computer ol most a year without problems
i have checked my hardware very intensive and there is nothing whrong with my installed ram
this is my system info, sorry that this is not translated into englis, i am from the netherlands and i can just a litle englisch
Adobe Photoshop Versie: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Besturingssysteem: Windows 7 64 bits
Versie: 6.1 Service Pack 1
Systeemarchitectuur: Intel CPU-familie:6, Model:10, Stepping:5 met MMX, SSE-integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Aantal fysieke processors: 4
Aantal logische processors: 8
Snelheid processor: 3073 MHz
Ingebouwd geheugen: 16375 MB
Beschikbaar geheugen: 13944 MB
Hoeveelheid beschikbaar geheugen voor Photoshop: 14750 MB
Geheugen in gebruik door Photoshop: 93 %
Blokgrootte van afbeelding: 128 kB
Niveaus voor afbeeldingscache: 4
OpenGL-tekenen: Ingeschakeld.
OpenGL-tekenmodus: Standaard
OpenGL-modus Normaal toestaan: Waar.
OpenGL-modus Geavanceerd toestaan: Waar.
OpenGL-modus Oude GPU's toestaan: Niet gedetecteerd.
Leverancier videokaart: NVIDIA Corporation
Renderer videokaart: GeForce GTX 460/PCIe/SSE2
Scherm: 2
Grenzen:= boven: 0, links: -1600, onder: 1200, rechts: 0
Scherm: 1
Grenzen:= boven: 0, links: 0, onder: 1200, rechts: 1920
Nummer videokaart: 1
Videokaart: NVIDIA GeForce GTX 460
OpenCL niet beschikbaar
Versie stuurprogramma: 9.18.13.4475
Datum stuurprogramma: 20141112000000.000000-000
Stuurprogramma videokaart: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Videomodus: 1920 x 1200 x 4294967296 kleuren
Bijschrift videokaart: NVIDIA GeForce GTX 460
Videokaartgeheugen: 1024 MB
Rechthoekige structuurgrootte video: 16384
Serienummer: 92298830452574092077
Toepassingsmap: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Tijdelijk bestandspad: C:\Users\gert\AppData\Local\Temp\
Werkgeheugen van Photoshop heeft asynchrone I/O ingeschakeld
Werkvolume(s):
C:\, 223,5 GB, 112,9 GB vrij
Map met vereiste plug-ins: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primaire map voor plug-ins: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Map voor extra plug-ins: niet ingesteldPhotoshop doesn't do a "memory test".
When Photoshop says "measuring memory" during startup, it is asking the OS how much RAM is available and what hard disks are available for scratch disks.
If you have network volumes mounted that are unavailable, then the OS may take a while to time out on accessing those drives.
The same goes if you have a bad USB drive connected.
Maybe you are looking for
-
My iPod touch 4g will charge but is not recognized by computer
I have done everything I know to do. My iPod touch 4g will charge from my computer but will not sync and is not recognized by the computer. I have tried it on 4 different computers and my brothers iPod touch 3G works and so does our iPad 2 but someth
-
How to use sswa jsp function in personalization?
I have a question. When I add a custom item of type link in a region using personalization, how can i access the click of the link as an event in that region';s controller. Also if I want to use the "destination function" field of the new Link create
-
If I download the new dreamweaver will I loose all my "sites"??
if I download the new dreamweaver will I loose all my "sites"??
-
Differences VC 6 (NetWeaver2004) and VC 7 (NetWeaver2004s)
Hi, Is there a document/information that describes all the differences between the Visual Composer for SAP Portal 6 (NetWeaver2004) and the new version for SAP Portal 7 (NetWeaver2004s)? I looked in several places but I haven't found a nice overview.
-
I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge
I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge. I read it may be the charger, that sometimes is blank, but it does charge my computer. Anything I can try? I have updated to 10.9.2 Message was edited by: