Photoshop stop working after moving objects

mi PS keeps stop working every time i move a object!!!
im using windows 7 and a nvidia quadro NVS 140m
i have already tried ctrl alt shift and click on the photoshop icon but nothing keeps freezing

I am having the same problem.
Windows 7 x32, nVidia GeForce 8500GT, 3GB memory, Photoshop CS4 and CS5, OpenGL switched off, MS Standard Wireless Mouse
When I move a selection with the mouse Photoshop stops working. When I use the arrow keys PS continues to work. This problem never showed up when we were still using CS4 but after the installation of CS5 it shows up in bothe versions. I updated the mouse driver, no change.

Similar Messages

  • Photoshop stops working after pc comes out of 'sleep mode'

    Hello,
    Photoshop stops working lately, when I start my pc out of 'sleep mode', I get the warning box 'Photoshop CC doesn't work anymore'.
    Is this a known problem, can I do something about that? Thanks in advance!
    These are my pc specs:
    -Windows 7, Processor: Intel(R) Core (TM) i7-3770 CPU 3,40 GHz, RAM= 8 GB, 64 bit system.
    -graphic card: amd radeon hd 7700 series
    With regards,
    Marcel

    It's not "green" but I suggest never using "sleep" type operations.  Windows and its drivers have never been good at making the transitions into/out of such modes, and probably never will be.
    Just leave it running or save all your work and fully shut it down.  Allowing the display to power down may be okay as a compromise, but even that could be problematic.
    This is the experience of an entire career in software engineering talking.
    -Noel

  • Photoshop stops working after I open it?

    I open photoshop and it loads up and after a second it closes and gives me this error
    Any ideas for fixing?
    I'm using the trial version

    Without system information and other technical details such as the crash logs nobody can tell you anything.
    Working with your Operating System’s Tools | Mylenium's Error Code Database
    Mylenium

  • Batch of .MOV stopped working after moving around some files?

    I had a collection of .MOV video files (which were working fine) on a Mac Pro station, imported them into FCP 7... Still working fine.  Then, decided I wanted them on my External Drive so I copied everything over to my external. Moved the originals into a new folder on the desktop (to organize).  Then when accessing my FCP project on my MBP via the external realized that half of them werent working anymore and showing a white screen in the viewer?  So I tried to open one in quicktime from the finder to get the error "this file could not be opened"??  So I go back to the original station and now its saying that they cant be opened on the original computer??!   I have no idea what I could have moved that would kill over 30 .mov files????  PLEASE HELP ):

    I don't suppose any of them (or all of them) were saved as "reference movies"?  That might explain it.  From the Save As… dialogue in QuickTime:
    Save as a reference movie
    Any external movies will be required to play this movie.
    S.

  • BlazeDS Streaming stop working after moving from FB3 - FB4

    Hello.
    I was developing a project in Flex Builder 3 and decided to try Flash Bulder 4. So a create a copy of my project and created a new Flex Project on FB4 using SDK 3.5.
    Added the -services "D:\workspace\.....\services_config.xml".
    So all was compiling correctely, but I wasn´t getting any messages from de BlazeDS Streaming.
    If I compile the same project on FB3, it does receive messages.
    Does anyone know about this issue? any ideas?
    Cheers
    Lucas

    Hello.
    I was developing a project in Flex Builder 3 and decided to try Flash Bulder 4. So a create a copy of my project and created a new Flex Project on FB4 using SDK 3.5.
    Added the -services "D:\workspace\.....\services_config.xml".
    So all was compiling correctely, but I wasn´t getting any messages from de BlazeDS Streaming.
    If I compile the same project on FB3, it does receive messages.
    Does anyone know about this issue? any ideas?
    Cheers
    Lucas

  • Photoshop CC 2014 stops working after less than 30 second and shuts down

    I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

    You have not provided any system information or crash logs, so we can't really know.
    http://myleniumerrors.com/working-with-your-operating-systems-tools/
    Mylenium

  • Photoshop cc doesn't work, stop working after 2 second.

    Photoshop cc doesn't work, stop working after 2 second, witout any errors. I don't have problem with lightroom. I work on windows 7 64bit. how to fix this problem?

    Please read this and proceed accordingly (restoring prefs is especially recommended):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Photoshop elements 12 stopped working after swapping mainboard

    Hi everybody!
    On a Win 7 Pro PC the PSE 12 Photo Editor stopped working after swapping the defective mainboard.
    I tried uninstall and reinstall as admin, with disabled security software.
    We always get the welcome screen from where you launch organizer or editor, of which only the organizer works.
    Launching the editor directly from the application folder or from within the organizer fails too.
    Also the newest update installed, does not change this behaviour.
    I'd appreciate your suggestions!
    Dirk

    I am having the same problem and tried calling tech support was on hold for an hour and a half its
    driving me crazy trying to figure it out.  Did an online chat which was no help what so ever.
    If I find out something I will let you know for sure...

  • My Plug in "Free Download Manager" stopped working after update

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
    It worked fine previously ! What did I do wrong ??
    **** Also I've forgotten my User name, but Firefox says that my email is registered already
    I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
    both Lap & Desk Top for some 3 1/2 yrs.
    ***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
    ***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
    Respectfully;
    Raymond E Bachelor
    aka "New System Services"
    <blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
    == This happened
    ==
    Every time Firefox opened
    == I updated Firefox to the Newest Version !
    ==
    == Troubleshooting information
    ==
    PLEASE !!!!
    SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
    == Firefox version
    ==
    3.6.6
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
    == Plugins installed
    ==
    *-Shockwave Flash 10.1 r53
    *Adobe Acrobat Plug-In Version 7.00 for Netscape
    *Office Plugin for Netscape Navigator
    *np-mswmp
    *getplusplusadobe16263
    *Default Plug-in
    *Delivery Network Acceleration by BitTorrent™
    *Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
    *Npdsplay dll
    *DRM Store Netscape Plugin
    *DRM Netscape Network Object

    I hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
    Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly.

  • When i use type tool photoshop stopped working

    hi,
    please help me in this problem
    when i try to use type tool,photoshop stopped working
    its photoshop cs3 ex

    > i have 500+ fonts
    Take out 250 fonts. See if the problem goes away. If it does, then you know the bad font is in them. Load the other fonts back in small batches (10-12) and test after each one.
    If the first 250 fonts does not solve the problem, take out most of the other 250 ... leave only the basic fonts that came with the system. Then load the others in 10-12 at a time, testing after each.
    Free fonts are not always free. Sometimes you have to spend a lot of time to make sure they are good fonts.

  • Airport card on MacBook stops working when moved

    Hi everyone, I've had this issue with my MacBook and I really don't know what to do anymore right now, so I hope someone here could give some advice.
    Last week my Wifi stopped working properly. I noticed that nothing connected anymore, and then it turned out that the whole Wi-Fi dialogue became unresponsive. The list of networks didn't update, it was continuously scanning for networks, and in the network preferences, the Wi-Fi showed up as being off. Clicking the button to turn it back on didn't do anything (it wasn't greyed out, I could click on everything).
    I came to the conclusion that this seemed to happen only when I moved the MacBook. The WiFi was fine when I just sat at my desk all day, but most of the time when I went to another room with it, this happened.
    I was on the phone with Apple support for a few days. They suggested several things to test. We tested, we waited, I observed, we tested again, waited observed. Needless to say, the problem persisted. After a few days I was advised to reset my MacBook completely. So I did, waited observed, and it still happened.
    I was then advised to go to the Apple store. I spoke to a Genius, he told me that the Bluetooth wasn't working and that it's probably the same issue. He told me they would replace the AirPort card and that would probably fix the issue. Several days later I got a call that this didn't fix the issue and that they would have to replace the logic board. At this point I had to keep telling the people from the Apple store what the actual problem was, which is that the WiFi stopped working after a while when I moved my MacBook sometimes. They kept reassuring me that it was the same as the Bluetooth and kept referring to the Bluetooth in all communication. I asked them to test the WiFi first, which they obviously didn't do, since they didn't know that was the issue, before I authorized replacing the logic board. They said ok and that they would call me before the store closes on the same day.
    Well I didn't hear from them, and eventually after a few days when I called them to see what's happening with it, they told me they replaced the logic board and that it was all working. I picked it up, I went home, I used it for a couple of hours and then the WiFi thing happened again. So this is where I'm at right now.
    So, where do I go from here?
    I am really dependent on my MacBook atm, as I'm finishing up my PhD thesis. I'm also not rich, so I can't have all parts of my MacBook be replaced to see if anything ends up working. I figure I might as well buy a new one if that's the only possibility?
    Every Apple employee I've been in contact with was really friendly, so I can't complain about that, but I feel like nobody is really looking at the actual issue that I'm having, so handing the MacBook in for repairs again really worries me (apart from the fact that it takes a lot of time that I shouldn't spend if nothing comes out of it).
    Does anybody have some advice?

    OK totally understand that.
    Did they do the following procedures?
    Reset SMC
    http://support.apple.com/en-us/HT201295
    Reset NVRAM
    http://support.apple.com/en-us/HT204063
    "nobody has informed me of the whole truth of what has actually been done to the MacBook "
    It would seem to me that if there was a logic board problem that it would be consistantly there. If moving the MBP causes a failure that would seem to be a connection problem. Specifically the connection to the WiFi/BlueTooth board.
    Have the Apple Hardware test ready to run:
    OS X Yosemite: Use Apple Diagnostics or Apple Hardware Test
    and the next time it fails see if you can get it to kick out a failure code. Then they'd have to replace the logic board.

  • My lightroom 4 stops working after a minute or so every time I turn it on.  What can I do?

    My lightroom 4 stops working after a minute or so every time I turn it on.  What can I do?

    Hi rob
    I tried reinstalling and the same thing happened.  After about 30 seconds, it just stops working?  any ideas?
    Thanks
    Maddi Love
    Date: Mon, 10 Dec 2012 22:35:27 -0700
    From: [email protected]
    To: [email protected]
    Subject: My lightroom 4 stops working after a minute or so every time I turn it on.  What can I do?
    Re: My lightroom 4 stops working after a minute or so every time I turn it on. What can I do? created by Rob Cole in Photoshop Lightroom - View the full discussion
    Did you try reinstalling Lightroom 4?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4911298#4911298
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4911298#4911298
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4911298#4911298. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • CS4 OpenGL stops working after a few minutes of painting

    Hi,
    CS4 OpenGL stops working after a few minutes of painting. It doesn't seem to have anything to do with the amount I paint. If I save the file, then reopen I can paint for another few minutes before the opengl stops working. Is this a standard problem with CS4? Is there a solution? Thanks! PJ
    System Specs:
    Windows XP SP3, updated
    Latest DirectX & all software updated
    Nvidia Geforce 9600 GT 512MB w/ latest driver
    Athlon64 X2 Dual 3800+
    2GB RAM
    Photoshop CS4

    Joining the party...
    I am having the EXACT same issue, PLUS my Wacon PTZ-430 only works for a fewminutes then, when the Open GL craps out, so does it... but only certain aspects. The cursor still moves, it just will not paint. Mouse will (direct via USB) but the tablet won't. If I delete CS4 prefs, then the Wacom works fine... for a while. Latest Wacom drivers and bee on the phone w them. All is fine under CS3.
    From DXDiag:
    System Information
    Time of this report: 12/8/2008, 15:37:52
    Machine name: VM-EDITING
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
    Language: English (Regional Setting: English)
    System Manufacturer: VELOCI
    System Model: 122-CK-NF68
    BIOS: Phoenix - AwardBIOS v6.00PG
    Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
    Memory: 2814MB RAM
    Page File: 1049MB used, 3652MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    Dual Monitor:
    NVIDIA GeForce 8600 GT
    Manufacturer: NVIDIA
    Chip type: GeForce 8600 GT
    DAC type: Integrated RAMDAC
    Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
    Display Memory: 256.0 MB
    Current Mode: 1920 x 1200 (32 bit) (60Hz)
    Monitor: Plug and Play Monitor
    Monitor Max Res: 1600,1200
    Driver Name: nv4_disp.dll
    Driver Version: 6.14.0011.7824 (English)
    DDI Version: 9 (or higher)
    Second:
    Card name: NVIDIA GeForce 8600 GT
    Manufacturer: NVIDIA
    Chip type: GeForce 8600 GT
    DAC type: Integrated RAMDAC
    Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
    Display Memory: 256.0 MB
    Current Mode: 1280 x 1024 (32 bit) (60Hz)
    Monitor: Plug and Play Monitor
    Monitor Max Res: 1600,1200
    Driver Name: nv4_disp.dll
    Driver Version: 6.14.0011.7824 (English)
    DDI Version: 9 (or higher)

  • PS 6 beta stopped working - after installing my old tablet

    PS 6 beta stopped working - after installing my old tablet
    Just to let U know, everywhere else (GIMP,Paint etc) there is no problem,
    also tablet is fully working and operational,
    drivers are up to date,
    PS 6 beta brign an error 01 .
    Also say about contating support ...
    How can I constact support when I Dont have a license or serial number etc..
    since it ask me about it while trying to reach support.... pointless! mad!
    ? What now? should I trash my favorite tablet and buy some junk just because of this BUG?
    or will it be solved somehow?
    I do believe that nobody will even care about one human and none of programmers will update
    database of this program for older tablets,,, but JSUT TO LET U KNOW - its not working.
    and free software as GIMP is working just perfectly, and adobe **** is not even opening a program..

    oh well, as I mentioned my tablet is old, ( but i thought that new version of photoshop will contain also some parts from old ones for compability, as U said its not working like that o.o  ) is is Pentagram Duo Pen (USB)
       I uninstalled tablet drivers and adobe software and reinstalled again without tablet, now it's working so it was a driver that messed up all..
    Oh, the error code nr was : 1 
    i also was suprised but this is what I got from photoshop in error message the rest of it was about contacting adobe.com/support ..blahblahblah
    I am still not fully understanding how its possible that so well paid software is not compatble with my super old tablet while even stupid paint is..
    I am sure it is complicated, however as U see I am not able to anything else but operate with mouse.. or switch to linux and practice in gimp..
    if U wonna to take a look at the file of that driver i will post it here :
    (more files on http://download.pentagram.eu/en/drivers/graphic_tablets/duopen_usb/DuoPen_USB_Win2K_XP.zip)
    Cheers..
    ; Installation inf for Pentagram USB Tablet
    ; (c) Copyright 2000 Pentagram Pte Ltd
    [Version]
    Signature="$CHICAGO$"
    Class=Mouse
    ;Class=USB
    ;ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
    provider=%MSFT%
    DriverVer=08/05/1999
    [SourceDisksNames]
    1="Pentagram USB Tablet Installation Disk",,,
    [SourceDisksFiles]
    MGUSBTAB.sys = 1
    MGUSBTAB.inf = 1
    wintab32.dll=1
    wtmgl.exe=1
    wtdata=1
    mgltab.cpl=1
    [Manufacturer]
    %MfgName%=ModelSection
    [ModelSection]
    %USB\VID_081A&PID_1000.DeviceDesc%=MGUSBTAB.Dev, USB\VID_081A&PID_1000
    ;[PreCopySection]
    ;HKR,,NoSetupUI,,1
    [DestinationDirs]
    MGUSBTAB.Files.Ext = 12,
    MGUSBTAB.Files.Inf = 17,
    MGUSBTAB.Copy             = 11,
    ; DIRID_SYSTEM
    [MGUSBTAB.Dev]
    CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
    AddReg=MGUSBTAB.AddReg
    [MGUSBTAB.Dev.NT]
    CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
    AddReg=MGUSBTAB.AddReg
    [MGUSBTAB.Dev.NT.Services]
    Addservice = MGUSBTAB, 0x00000002, MGUSBTAB.AddService
    [MGUSBTAB.AddService]
    DisplayName    = %MGUSBTABLET.SvcDesc%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %10%\System32\Drivers\MGUSBTAB.sys
    LoadOrderGroup = Base
    [MGUSBTAB.AddReg]
    HKR,,DevLoader,,*ntkern
    HKR,,NTMPDriver,,MGUSBTAB.sys
    ;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","MaximumTransferSize",0x1000 1,4096
    ;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","DebugLevel",0x10001,5
    HKLM,%JX_REGISTRY_PATH%,"NumberOfButtons",0x00010003,3
    HKLM,%JX_REGISTRY_PATH%,"SampleRate",0x00010003,100
    HKLM,%JX_REGISTRY_PATH%,"x1",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"y1",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"x2",0x00010001,15240
    HKLM,%JX_REGISTRY_PATH%,"y2",0x00010001,12700
    HKLM,%JX_REGISTRY_PATH%,"tabletMode",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"xSens",0x00010001,32768
    HKLM,%JX_REGISTRY_PATH%,"ySens",0x00010001,32768
    HKLM,%JX_REGISTRY_PATH%,"clickThreshold",0x00010003,40
    HKLM,%JX_REGISTRY_PATH%,"x1Phys",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"x2Phys",0x00010001,15240
    HKLM,%JX_REGISTRY_PATH%,"y1Phys",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"y2Phys",0x00010001,12700
    HKLM,%JX_REGISTRY_PATH%,"mappings",0x00000000,"01 02 04 00 00 00 00 00 "
    HKLM,%JX_REGISTRY_PATH%,"parameter1",0x00000000,"µŇ¬šŤ–šŚß«žť“š‹Äß©šŤŚ–‘ßÎŃĎÉÄßąŤ’ž‹ĹßÉŇ ť†‹šßť–‘žŤ†"
    HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Run,"wtmgl",0,"wtmgl.exe"
    ;for GUID
    ;HKLM,%JX_REGISTRY_PATH%,FriendlyName,,"Pentagram Serial Tablet"
    [MGUSBTAB.Files.Ext]
    MGUSBTAB.sys
    [MGUSBTAB.Files.Inf]
    MGUSBTAB.Inf
    [MGUSBTAB.Copy]
    wintab32.dll
    wtmgl.exe
    wtdata
    mgltab.cpl
    [Strings]
    MSFT="Microsoft"
    MfgName="Pentagram"
    USB\VID_081A&PID_1000.DeviceDesc="Pentagram USB Tablet"
    MGUSBTABLET.SvcDesc="USB Tablet driver"
    JX_REGISTRY_PATH="System\CurrentControlSet\Services\mgltab\Parameters"

  • Keyboad stops working after login

    Hey guys! I have windows 8.1 installed on my Lenovo Ideapad Z510. Recently, I have been experiencing problems with the keyboard. I can type in my password and log in, but the keyboard stops working after that. It used to stop working and then fix itself after a few minutes, but it completely stopped working yesterday.
    I have searched for solutions online and have tried almost everything from disabling filter keys to uninstalling the keyboard driver, but they did not make any difference.
    Please let me know if you can think of a solution. Any comments would be greatly appreciated.

    Try the on-screen keyboard and see if that works. I don't think this is your problem, but this morning after updating my Yoga from 8 to 8.1 my keyboard stopped working. But it has a touchscreen and then on-screen keyboard worked fine. I fixed the keyboard by moving the screen on the hinges. I have no idea what that did, but it fixed my problem.
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

Maybe you are looking for