Photoshop tooltips Problem

I just upgraded Photoshop CS5 extedded from CS4 extended. Everything went OK till I gate update 12.2 Version. Tool tip stop working. when hovering the mouse point, it does not show nothing. Just white stripe. And sometime or everytime when I open Photoshop it shows white strip differently with some unreadable text in the corner. At first I thought that I am installing the shoftware not right way. So with that thinking I install/unstall about six times and each time the same problem. It happen only after update to 12.2. I am runnint Windows XP Pro., 32bit, SP 3. There must be something to do with !2.2 Updates and is not working. I am not a very good with the system or a perfect Phothshop User. Just my hobby and work in the Phoshop and this tooltip is very important to me. Somebody Please help Me. Thank You.

This is a known problem with the Photoshop 12.0.2 update, recently released. Adobe knows about it and is working on a fix.
Check this thread on ToolTips: http://forums.adobe.com/thread/762392?tstart=0
-Noel

Similar Messages

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

Photoshop CS6 Problems

I have installed photoshop cs6 on my computer (Windows 7) but the programm is a bit useless since it can't create or open files.
I tryed reinstalling all my adobe programms 3 times but photoshop still won't work.
Do you have an idea how I can make the programm work?
thanks in advance

Thanks for you email, I finally went to an informatician today. We
finally found out that even if windows 7 sais the drivers are up to date
the driver that is managin to switsch between the two graphic cards
wasn't up to date. We downloaded it from the website and photoshop works
now perfectly well.
Thanks for your help!
Emmanuel Dorsaz
Le 09.09.2012 21:14, Manish-Sharma a écrit :
>
Re: Photoshop CS6 Problems
created by Manish-Sharma
<http://forums.adobe.com/people/Manish-Sharma> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4685059#4685059

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Adobe Photoshop CS6 Problem

I have successfully installed Photoshop CS6 to my computer. However, when I open the front page to CS6 everything "freezes up", and I cannot open any of the tabs - not even the file or close tabs.
Have uninstalled and re-installed the CS6 several times with no effect. Am installing from a boxed disc that I purchased from Adobe.
Ted Wolfe

Got it solved by going by adding the latest updates to CS6.
Ted Wolfe
In a message dated 10/24/2013 4:37:22 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Adobe Photoshop CS6 Problem
created by Jeff A Wright (http://forums.adobe.com/people/JeffAWright)
in Downloading, Installing, Setting Up - View the full discussion
(http://forums.adobe.com/message/5786337#5786337)

Photoshop elements problem

everytime i try to edit in the photoshop elements 10 an error message appears saying "unable to continue because of a hardware or a system error, this problem is unrecoverable"

it never worked and it is the first time for me to download pse10 and i tried reinstalling it and it never worked
Date: Sun, 13 May 2012 15:15:09 -0600
From: [email protected]
To: [email protected]
Subject: photoshop elements problem
    Re: photoshop elements problem
    created by photodrawken in Photoshop Elements - View the full discussion
OS version? Did PSE10 ever work? If so, what changes did you make to your system, such as un-installing or installing any software or drivers? Ken
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4403690#4403690
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4403690#4403690. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have got new hardrive windows 8.1 and i have downloaded PS, LE and AE...Clouds...when i open PC so i get massage on rigth corner short time." your photoshop has problem with compalitet"....i have not put things back or used PS,,,what shall i do? LR work

i have got new hardrive to windows 8.1....when i open my PC so i get message on lower right corner - very short time - your photoshop has problem with compalitet....i have not used it yet or put brushes and so on back....LR is working fine...i can open photoshop without problem..and AE...what shall i do?...

Thanks for info:
A. Backup before doing anything advanced is recommended but not widely used.
B. Upgrade on vanilla plain (and updated) operatiing system goes flawlessly. Upgrade on "real" computer may depend on "status" of operating system and applications installed. You may not be the last experiencing troubles.
C. Software vendors expect that users has nearly unlimited disk size, large memory and latest processor.
D. It is on you to find anything positive to compensate annoyances. Mental balance is in your hands ;-)

Photoshop Elements problems

I bought Photoshop Elements 10 in March and I have not been able to use it. Photoshop Premiere Trial version will not load and the Inspiration Browser will not load. Also any valuable help you get with this product, you have to pay for it (as if purchasing the product was not enough). I am very disappointed in this product and I actually want my money back.

I am not able to do anything in Photoshop Elements.
Date: Tue, 4 Dec 2012 02:12:21 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop Elements problems
Re: Photoshop Elements problems created by domnic.rj23 in Photoshop Elements - View the full discussion
Can you state the nature of the problem you are facing?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4894746#4894746
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4894746#4894746
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4894746#4894746. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can two pictures of the same size still appear to be a different size? (Photoshop CS6 problem)

I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
so that you won't be confused when you read it.
What Happened
For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters.
I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm.
My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had
to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X)
of the webdesign. I did this before and it worked perfectly.
But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.
I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop
had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y)
turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger
than it was before. How can this be, and how can I still make the images(X&Y) the same size?
What I already tried
- I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same
measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches.
Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and
when I pasted the other picture(Y) in this image, the same problem was still there.
- I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped
it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters.
Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
Could you help me please?
I really don't understand why this problem is happening and I can't think of a solution because I am still quite unexperienced with photoshop
and I also couldn't find the answer on the internet. I assume the solution is very simple, but I haven't found it yet allthough I have to finish this
project soon and I also have to use the image(Y). So any help would be very appreciated.
Thanks,
Simone

You need to understand the basic of a digital image.
Image is recorded as pixels and image is a rectangle so many pixels wide and so many pixel high. Pixels do not have a fixed size. The images resolution setting defines the image current pixel size.
So for example if you have and image that is 300 pixel wide and 200 pixels high and set its dip resolution to 100DPI the image size is 3" wide and 2" high. Set its dip setting tp 300DPI the image size becomes 1" wide by 2/3" high. Both the 3" x 2" and the 1"x2/3" images have the same 60000 RGB Colored Pixels.
Web pages are sized to to be so many pixel wide and so many pixel high. Often the height is not enforced scrolling is used when viewing.
However image for web pages often must not exceed so many pixel wide and high for displays have a fixed resolution and a fixed number of Pixels. You want images to fit on users displays. Users use different displays some have high resolution displays and other have low resolution displays with far fewer pixels then high resolution displays.
Web Image are normally image that have been interpolated down in number of pixels a resampled large image so that web image will fit on a low resolution display with limited number of pixels. The image size the user see depend on the display they are currently using. A low resolution display's image will be much larger then the same image displayed on a nexus 10 with a 300dip display. Cheep low cost Desktop LCD have a 84DIP resolution, large high cost desktop displays are not be much higher in resolution somewhere near 108DPI. Tablets, Laptop and Phones can have much higher resolution like the nexus 10 300DPI IPS display

CS2 Premium reinstalling Adobe Photoshop activation problems

To: Adobe.com
From: Paul Sacca
[email protected]
Subject: CS2 Premium
To Whomever it Concerns,
After recently upgrading my computer's CPU, Memory and Graphics it became necessary to singularly reinstall my Adobe Photoshop (inc. Illustrator & Bridge) since I don't use the other members of the CS2 Premium Suite I made this a custom installation. Everything is working correctly with the exception of my Adobe Activation Warning System.
As you know Adobe no longer supports the CS2 Product you sold me which is your decision regardless of my belief of how good customer service should work. Your Web Site Trouble Shooting Guide states:
Adobe strongly advises against running unsupported and outdated software. The serial numbers provided as a part of the download may only be used by customers who legitimately purchased CS2 or Acrobat 7 and need to maintain their current use of these products.
I did legitimately purchase this product and once again I disagree with Adobe and wish to continue using my CS2 Photoshop, Illustrator & Bridge.
Am I to ignore your Warning System continually as I use my product? Is there another way to peacefully resolve this conflict? or Are you going to make this ugly and insist I buy yet another updated Adobe Product that you will still continue to support (for the time being)? My wish is simply to continue using my Photoshop without threats or problems from Adobe...can you help?
Paul Sacca

You can keep using CS2 without further cost. It just requires a few steps to remove the activation version and replace it with the non-activation version.
Uninstall your CS2.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Download the non-activation version of CS2 from the above link. It's valid for CS and CS2 owners.
Install then enter the new non-activation serial number provided at that link. Your existing CS2 serial number will no longer work.

Leopard and Adobe Photoshop CS2 problems...

I've been reading the posts about Leopard and CS2 problems and have to say that I'm confused. A great many of you have had issues from the very beginning as soon as you upgraded to Leopard. I did not. I use a VERY basic set-up without third party plugins and suspect that to be why I had no problems. At least until now... I looked back through my documents to be sure, and my Photoshop was working beautifully through the first week of January. Somewhere between then and now there had to be an update from Apple that broke Photoshop. I haven't changed any settings since it last worked, and there certainly haven't been any updates from the greedy buggers over at Adobe because they don't support CS2 anymore apparently. What could Apple have updated that might have accidently corrupted my Photoshop?? I don't really feel it could be anything else, but who knows... Does anyone have any ideas? I would hate to have to downgrade to OS 10.4 just to use my Photoshop and I certainly can't afford to shell out the extra $$ for CS3.
I appreciate any light you guys can shed on the topic...
Stan

Actually the 10.5.2 update does seem to have improved things for me with Photoshop CS1. I can now actually type entries into the little boxes for things like crop and brush sizes. The File Browser is still prone to crashing the application though, and there is still some weirdness with opening files by a drag and drop onto the app icon in the Dock. But nothing got worse, and several annoyances disappeared.
One thing to try is to create a brand new admin test user, with no additions (that includes not adding fonts), log into the new account and see if Photoshop will work there.
And speaking of fonts, do you have Linotype's Font Explorer installed? If so, did you get the new updater for it? Some people who use Font Explorer were having a lot of problems after the 10.5.2 update, including Photoshop failure to launch, that were fixed with the Font Explorer update.
Francine
Francine
Schwieder

Adobe Photoshop CS3 - Problem with Trial

I recently downloaded and installed Adobe Photoshop CS3 directly from Adobe as it is the latest version my Mac supports. Upon start up, I am greeted with two options: a) I have a serial number for this product. and b) I want to try Adobe Photoshop CS3 free for 30 days. Seeing how I am simply looking to evaluate and have not purchased said product, I selected option b.
However, upon clicking "Next >" I am greeted by an error. "Problem with Trial" I am left with nothing but wasted time. This is the first time I have ever installed Adobe Photoshop CS3 so I do not understand why it will only allow access with a serial number. Any help to allow me to try this software is appreciated.
Thanks.

Could the trial have a time bomb in it that prevents use after several years? There's not much of a need for Adobe to allow trials to run for so long after the product's life cycle has concluded.

Image Capture and Preview have trouble finding scanner. Photoshop no problem.

Image Capture and Preview have trouble finding the scanner wirelessly unless it is on when the Mac starts up. Photoshop finds the scanner no problem. Any suggestions for Image Capture or Preview?
The scanner is Canon MP620. Mac is MBP, running 10.8.2
I have done all the uninstall, reinstall, update drivers, etc. Please don't bother suggesting that stuff.
Thanks.

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions). With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works..... I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

Photoshop CS6 - problem displaying CMYK files in the project RGB

Hello!
I have a problem in 64 bit Photoshop CS6 - a new file (RGB, 72 dpi, no color profiles, mode 8-bit) images I put smart objects (images, CMYK, 300 dpi, 8-bit mode) wanting to build a small presentation for the web. These images in CMYK in some places have black spots pixelowe mainly in places where there is a gradient, or green. When you export a file to jpg's no black spots.
In other applications, this problem does not exist. Restarted the program recording it again but the problem has not gone away. Photoshop settings are standard.
I'm working on Win Pro 7, a very good computer.
What do I do? Help me: (

I am not entirely sure I understand you, but it sounds like it could be graphic card related... possibly at least. Could you post a screen-shot of how the problem looks?

Lightroom 1.1 - Adobe Camera RAW 4.1 (Bridge, Photoshop CS3) problem

Dear all,
I am having some problems with the appearance of files developed in adobe lightroom 1.1 or in adobe camera raw 4.1 from e.g. bridge or photoshop cs3. When developing in lightroom the images look great, however when using acr 4.1 and the same xmp sidecar settings imported from lightroom, the image in acr looks very pale in comparison. For example when using the export into photoshop option in Lightroom, the image in PS3 looks very pale to the one in lightroom. The same problem persists with developing using ACR 4.1 from bridge. I have turned autotoning in ACR off. Also in the color management of PS CS3, the desaturate checkbox is UNchecked.
I am using an icc profile for my 30" cinema display, calibrated with colory eyes pro and a spyder2.
Has anybody had similar problems with ACR 4.1 or am I just doing something horribly simple wrong?
Thanks for your help!
Immanuel

Thomas,
thanks for your reply. In Mac OS X Preview the images look all good and very much like what I see in Lightroom. In any case not as pale or like with a slight white overcast to what I see when using ACR 4.1 from Bridge or Photoshop CS3. In PS color settings, preserving embedded profiles is checked. Yes, it seems to me as well that this is some color management issue. The 30" Cinema display was calibrated using Color Eyes Pro and Spyder2 to Gamma 2.2 and 6500 temp. However, even when reverting to the standard Apple color profile for the monitor, the problem persists.
No luck so far...
Immanuel

Photoshop tooltips Problem

Similar Messages

Maybe you are looking for