Photoshop touch Does not Start
Please help me. I just bought the Photosphop Touch after upgradeing my iPAD 3 ios to 5.1.1 I tried to start the application but it just doesnt start.
I am using the highest spec of the IPAD 3 : 64G , 4G, Wifi and ...
Hi,
this is a known issue that some users seem to run into.
The workaround is to delete the application on the device and then reinstalling it.
Note that deleting it is very important - a reinstall from iTunes does not normally help.
Thanks,
Ignacio
Similar Messages
-
My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)
Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q -
Noise Reduction in Photoshop Touch does not work
Noise reduction in Photoshop Touch does not work. Move slider and nothing happens.
I also have Photoshop Express, and noise reduction works fine with it.
Is it me or the software.
Used on iPad mini.I think you are posting in the wrong Forum.
http://forums.adobe.com/community/photoshop/touchapps -
ipod touch does not start at all
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please adviseI am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3. -
Photoshop 32bits does not start up anymore on Windows 7 64bits.
This is the situation:
We have 2 PCs that have been configured identically, with the exception of a scanner (canonScan 9950F) attached to the computer and the 32 bits twain scanner driver installed.
Both PCs worked correctly, the one with the scanner attached started 32 bit PhotoShop when there was need to scan. But for some obscure reason, 32 bits Photoshop does not work anymore. I have tried disabling the twain driver (by moving it out of the plugins directory), restarting the machine, updating to the latest software, but despite this, Photoshop does not start anymore... no beep, no crash, no nothing.
I deinstalled Photoshop, Reinstalled - same phenomena.
At least the Event Viewer of Windows has something to tell, even if it is not quite understandable to me:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2011-07-04T15:39:45.000000000Z
EventRecordID
8452
Channel
Application
Computer
pwlu0w977.paulwurth.agn
Security
EventData
Photoshop.exe
12.0.0.0
4bbc56b6
Photoshop.exe
12.0.0.0
4bbc56b6
c0000006
00e8beff
12b4
01cc3a608276fe50
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
d70b772e-a653-11e0-b8c6-6431503f59b8
May be someone out in the user community has a solution? Needless to say, that the second machine works fine!
Lucien.The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel -
Photoshop CC does not start up
Photoshop CC does nog start up. Only the screen with plugins seeking appears and then nothing. What can I do?
Do a screen screen capture and post it here so we can see what you stating about a white layout...
-
Photoshop Elements does not start for the second time
Hello,
our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
He's running Win 7 SP1 64 bit
Any sugestions? Thank you.Hi,
It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
Most people have overcome the problem by creating a shortcut direct to the two main applications.
Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Brian -
After having Set up my New iPod touch The Screen went Black and I can't Start it any more. Also ITunes Domes Not detect The iPod.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch does not start up after resetting
my ipod does not turn on after I reset it. It shows an apple logo and flicker white screen until the battery goes dead.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Photoshop Elements does not start
Hello,
I bought and installed Photoshop Elements a view month ago and it worked fine. Yesterday I wanted to edit a photo, but it was not possible to do any changes to the photo, because the program crashed every time I tried. So I reinstalled the program and now it doesn't even start anymore. If I start it over the select screen (Organizer/Editor) it says "Photoshop Elements funtkioniert nicht mehr, es wird nach einer Lösung gesucht" and if I start the editor directly I get an error message: PhotoshopElementsEditor.exe - Einsprungpunkt nicht gefunden. Der Prozedureinsprungpunkt "__crtCreateSymbolicLinkW" wurde in der DLL "MSVCR110.dll" nicht gefunden. Does anyone have a solution to this problem?After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.
-
Photoshop Elements does not start under Windows Vista
The Twain-Module of my Canon CanoScan FS4000US Filmscanner works only under Windows Vista (no newer OS!). Fortunately I own an older Notebook with Vista as OS, so I have PSE Version 5.0.2 installed and use it to import my old color negatives via the twain module. Fine! It even works with 42 bit. But suddenly, PSE refuses to start and freezes at the window loading the libraries. At this stage it can only be stopped with the help of the task manager. A little search in the internet informs me that I am not the only user with that specific problem. Any help from Adobe?
After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.
-
Hi there,
I just bought a web premium CS 4 suite. I am able to use all the other programmes however I am unable to use the photoshop CS 4. On start up, while it loads "reading preferences", another pop-up window appears with the message "Adobe Photoshop CS 4 has stopped working"
I know this question has been up several times. I have read through all of them and tried all methods but to no avail - I have tried deleting the preference file by the ctrl alt shift and manual method. I have disabled my anti-virus.. however i still cannot start my programme. any more advice to offer?
Thanks in advance.Hi, this is probably a year toooo late but better late then never
Try clearing your perf file by selecting CTRL, Alt, Shift during PS Start up. You have to be quick with the open timing. A screen should pop up asking if you want to reset. Hit yes. A conformation should pop up after.
cheers, Andreas -
Ipod touch does not start up... please help...!
....even after i've tried everything like pressing and holding the sleep/wake button.... and recharging it .... its not even showing the apple logo...its just dead...what should i do....?
Try to connect in recovery mode, explained here:
iOS: Unable to update or restore
Make sure that the battery is charged before you connect. -
IPod touch music does not start songs from the beginning
the songs on an ipod touch does not start from the beginning how do you fix this
In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
Highlight a song, right-click/Get Info/Options>Remember playback position:
Maybe you are looking for
-
IMac will no longer boot-up, Pink Lines
27" iMac running Mavericks, purchased March 2010, a great computer; that is until something goes wrong and local Apple support resources are scarce in my location! Prior to the issue occurring I was performing a cut/paste from a website to a document
-
IMac 27 Hard Drive Brand?
I have an imac 27inch EMC 2309 that will not start. How do I find the exact brand and type of HD i need to purchase so that it will work if I cant access the drive to know the brand for the sensor wire? I've tried everything. At first it wouldnt s
-
Acrobat 9.1 upgrade causes crash
I upgraded Acrobat Pro 9.0 to 9.1. When I launched 9.1, it started immediately opening the last 50-60 pdf files that I worked on, until the app finally stopped. I have done completely clean reinstalls of 9.0, then adding 9.1. Interestingly, I can wor
-
Desirable Vendor not populating in backend (R/3)
Key Words: Desirable Vendor, Vendor Replication System: SRM 5.0, SAP R/3 4.6 Scenario: Classic We replicate vendors for the backend R/3 via BBPGETVD. However, when ran BBPGETVD we had some errors so we had to select <i>If R/3 Number Assignment is
-
How do I reinstall Photoshop7 on my Mac? My computer crashed and now the app is gone and I have no CD to re-install it.