Photoshop touch Project file not recognised

Hi
I have been working on a photoshop touch project with several photos as layers, it has been fine for a few weeks, but today it won't allow me to open it - it says not a valid photshop touch project. Other projects i have created are fine. So i recreated it, but when i saved it and reopened it it also gave the same error. Please help - thank you
I am using smasung galaxy note 10.1

Rachel
I am very confused with the answers that you have gotten to your question. So, all, show me the error of my ways as I respond to what I think Rachel asked.
Rachel, you say that you are working with a Sony DVD Camcorder. DVD Camcorder's record to a DVD disc in the camcorder, not to a hard drive in the camcorder (like in Hard Drive Camcorder). So this is the typical scenario for getting your video into Premiere Elements in that situation. You did not mention what version of Premiere Elements that you are using, so I will assume Premiere Elements 7 for now.
Place your DVD disc from the camcorder in your computer's DVD burner drive tray. Open Premiere Elements 7, Get Media, and the the category "DVD (Camcorder or PC DVD Drive)". In the Media Downloader that opens use the Advanced Form of the dialog to import the VOBs from the DVD disc into Premiere Elements that is set with a project preset (new project dialog) = NTSC DV Standard or Widescreen, depending the camcorder setting for standard or widescreen. (Use the PAL counterpart if you are in a PAL region).
That works for most users quality wise. For some it does not. Then the typical route is to use the free program MPEG Streamclip to convert the DVD content to DV AVI. Then you bring the DV AVI verison into Premiere Elements (project preset as described above) with Get Media/Files & Folders.
http://www.squared5.com/
That is it.
If other than that, please go into further detail brand and model of camcorder as well as version of Premiere Elements in use.
ATR

Similar Messages

How to open your Photoshop Touch project file in Photoshop

How to open your Photoshop Touch project file in Photoshop
When your files are stored in the Creative Cloud, you can access them on your mobile device using Adobe Photoshop Touch, or on your desktop computer using Adobe Photoshop. Photoshop Touch can open files in the following formats: PSD*, PSDX, PNG, JPG, and GIF. And, with a free plug-in for Photoshop CS5, CS5.1, and CS6 you can open the PSDX files created by Photoshop Touch in Photoshop.
[Note: PSD files can only be opened via the Adobe Creative Cloud. The file is converted, layers are flattened to a single layer, and other info that is only supported in Photoshop is removed.]
Download the plug-in (if you have CS6, skip this section)
1. If you have CS5 and CS5.1, you are required to download a plug-in to be able to open your PSDX files in Photoshop. If you have CS6, you are not required to download the plug-in (it is native within the version). In a browser on your desktop computer, navigate to the Creative Cloud Homepage ( https://creative.adobe.com ). Sign-in to Creative Cloud using your Adobe ID, then navigate to the Creative Cloud Apps & Services page (https://creative.adobe.com/apps).
2. Click download under “Touch App Plug-ins” to start the download and install process. Included with the installer is a plug-in for Illustrator CS6, which enables opening of Ideas files (.idea) in Illustrator, and a plug-in for Photoshop CS5 and 5.1, which enables opening of Photoshop Touch files (.psdx) in Photoshop.
3. You will be asked (if you haven't already) to install the Adobe Application Manager. Follow the steps to install the manager, and the Touch App Plugin should begin the download and installation process. If it does not, click install next to the “Touch App Plugins” icon in the Adobe Application Manager to start the process.
4. You're all set to start opening your PS Touch files in Photoshop CS6.
To save a Photoshop Touch file for upload to the cloud.
1. Launch Photoshop Touch and ensure that you are in the organizer view. (Tap Done in the upper-left corner of the screen to move from edit view to the organizer view.)
2. Tap to display the share menu.
3. Select the file(s) to upload
4. Select the file format to upload to the cloud. Then tap OK.
5. Once you save the file format, you have a choice to e-mail the file as a attachment, or save a copy. By pressing cancel, it still can be uploaded to the cloud.
Uploading PS Touch files to the cloud.
1. Tap the settings button in the top right corner. Then tap My Account.
2. Tap Sign in. Sign in with your Adobe ID. To obtain an Adobe ID, go to : https://www.adobe.com/account/sign-in.adobedotcom.html. Once you are signed in, the total storage available in your Creative Cloud is displayed.
Sync your Photoshop Touch files to the Creative Cloud.
1. Tap the Creative Cloud icon. Make sure the Sync files toggle is switched to the on position.
2. When Creative Cloud sync is turned on, you can see your files being synced to your Creative Cloud account.
Open a Photoshop Touch file in Photoshop
1. On your desktop computer, launch a browser and navigate to the Creative Cloud website. When you are signed in, navigate to your Photoshop Touch file. Click to select the file.
2. Tap the download button in the top right corner.
3. When the download dialog button pops up, select PSD. Once the file has been downloaded, you can open in Photoshop (CS5, CS5.1, CS6) on your desktop.
4. When the file is opened in Photoshop, it displays its layers (Note: that if the file is dragged and dropped, and NOT downloaded, it will not display the layers).

Lightroom 5.3 should be able to open D600 RAW photos.
The problem is most likely that you used some version of Nikon software to transfer the photos to your computer. This interferes with Lightroom's ability to read the files. If the files are still on your camera card, use Lightroom to directly access them from the camera card. If they are not on your camera card, you can still fix the files, see http://forums.adobe.com/message/6181267#6181267

Premiere Pro CS6 Project Files Not Recognised by Windows

Gidday, I hope someone can help with this problem. Premiere Pro(and After Effects) have worked perfectly on my laptop up until now. Saved PP projects are not recognised by Windows 7. I can open a new project but once I save it, it is not recognised and won't open and I can't reset either as the default programs for those files. The applications are visible in the start menu so it is very strange as all were working fine last week and nothing has been done to the laptop in the meantime.
Anyone else come up against this problem?
Thanks
Steve

Steve, I just had this happen as well.
I used the Programs section of the Windows Control Panel to initiate an uninstall. On Adobe's Unistall setup screen (or whatever it may be called) I selected to uninstall PP only. When it was done I restarted and then installed PP only. And then it was back to "normal."

Photoshop Touch projects do not sync back to Creative Cloud files

Using current versions of Photoshop Touch on iPad and Creative Cloud on iMac. Touch Apps plugin is installed on iMac. But new projects created in PS Touch never sync back to the CC. They show the little horizontal progress bar near the bottom of the project's thumbnail, but there is never any progress. Is this because currently CC file/desktop sync is not available or is there another explanation that will allow me to perform the sync function?

I do not see any messages when I log into the browser https://creative.adobe.com/?
The sync dialog in PS Touch says - "In progress"
The storage indictor says 21% full and the blue bar shows 4GB of 20GB
In searching the forum, I found this similar problem:
http://forums.adobe.com/message/5144732
One of the suggestions made there was to remove all the files from Creative Cloud and be sure to empty the trash. So I just tried that (after backing up my files), but it appears my account with CC crashed as it's stuck trying to delete the archive, with the message: "Deleting... Please wait a moment". It has been over 20 minutes so far.
It does not appear to be making an progress deleting the files and I can no longer acess my account at https://creative.adobe.com/ as the browser page won't load.
So, now things are even worse. Not only are my PS touch files not sycing with CC, but now I can't evn access my account.

Where do I find manuals for photoshop touch for ipad (not video tutorial)?

Where do I find manuals for photoshop touch for ipad (not video tutorials)?

The best way to get quickly acquainted with PS Touch is to do the built-in tutorials. There was a "quick start guide" of sorts, but as far as I know, they haven't updated it to reflect the latest version as of yet.

Macs and aiff files not recognised by older hi fi.?

I have burnt audio cds using external burner(itunes 8).They are on the cd as it plays in the mac but will not play on our cd player.Iread something online about macs and aiff files not recognised by older hi fi.
http://en.wikipedia.org/wiki/AudioInterchange_FileFormat
any help please

Several possible issues.
1) Did you burn the CD as an audio format CD or did you just burn AIFF files to a CD as a data CD? CD players require an audio format CD, not just AIFF files burned to a CD as AIFF files.
2) Older CD players can have problems reading burned CDs. Sometimes using a different brand CD, a longer burn time (slower burn speed) can help, but sometimes you just have to buy a newer player. CD-RW can present big problems unless it is specified as supported.

Is there any way to recover a file that has somehow become not a valid Photoshop Touch project?

I have been working on a piece of art for the last month and all of a sudden when I went to open it this evening the app was unable to open the file. Please Help!

Not good as that usually means the project itself was corrupt.
Any chance you sync'd to Creative Cloud? That's the only way I know of that backs up your PS Touch (PSDX) files.

Newbie Q - nikon d300s avi files not recognised - wants codec.

I have just installed elements 9 and start a new project - i have some nikon d300a avi files on my hard disk and want to create a video. However when I try to import the files the program says this files are not recognised or the codec might be incorrect. What am I supposed to do now? thanks. Phil

Well, CODEC's are odd little things. Some will work fine in some programs, and some will not.
This ARTICLE goes into more detail, though cannot cover all possible CODEC's, or all possible NLE programs. When it gets down to why one might work with program ____, but not program ____, I call upon Chief Dan George, "sometimes the magic works, and sometimes it does not."
Good luck,
Hunt
PS - did you install a driver for the Nikon, and/or any software provided? It could well be that Sony's Vegas has an MJPEG CODEC in its installation, but PrE just cannot use that. Normally, if one has the MJPEG CODEC from the camera mfgr. things work OK.

Project file not opening in my system

I have installed a new LabVIEW 8.2 and all the drivers resourses also, i am not able to open th project file, sometimes the NIMax is not opening and keeps me installing again and again but not working properly.even after formating the system i am not able to install labview propely, there is no antivirus software installed in it. any one faced this problem earlier...

Hi Kodeeswaran,
There could many reasons why this is happening. I would suggest the following steps.
1) Check to see if LabVIEW is properly activated or not.
2) Check if you are an administrator of that particular machine.
3) Try out the steps provided in this KnowledgeBase
4) Has the same set of CDs worked on any other machine where you've tried installing the software. There is every possibility you have a bad installation disk.
Thank you and have a nice day.

Ipod touch (4th gen) not recognised by windows 7 computer!

Hello everyone
I have been unable to use itunes for a good while now because my computer will not recognise my ipod touch. My laptop makes a noise like it is configuring when I plug my ipod into it but then absolutely nothing happens. When I checked apple mobile support it was installed but when I go to device manager nothing appears. I have uninstalled itunes and reinstalled regularly and nothing solves the problem. I am completely out of solutions, any help would be greatly appreciated.

Does the iPod work?
Does it charge?
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Note the above removes and reinstalls all Apple software
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

10.4 Update files not recognised

Using 10.4 on a second hand Powermac g4 from ebay, so no installation discs.
Successfully downloaded standalone updates 10.4.1....10.4.9 etc but first one (MacOSXUpdate10.4.1.dmg) not recognised so won't install. others recognised but won't work until first one installed.
Same with standalone combo update (MacOSXUpdCombo10.4.10) it isn't recognised. Using AOL dial up so it's taken seven attempts (overnight) to get a continuous connection for the complete Combo download. (Same with Software Updates Combo from Apple menu on desktop)
How do I get the right file which will be recognised ? or should I buy a full retail version of Tiger from ebay ? I'm concerned about all the probs people are having with updates as I am miles away from Apple Store for repairs and am a newbie. Many thanks for any replies.

Welcome To  Discussions frenchbingo!
Which version of OS X is currently installed on the Power Mac G4?
If it is not Tiger 10.4.x, then as sig posted, you will have to purchase a set of install discs.
Exactly which model PowerMac G4 is it?
What size is the Hard Drive, and how much space is available?
If it is this model Power Mac G4 (AGP Graphics), it had OS 8.6 or OS 9.0 installed, when manufactured in 1999.
Mac OS X Versions 10.1, 10.2, 10.3, 10.4, and 10.5, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.10 (Pending), can be downloaded for free.
Leopard 10.5.x, can be purchased at The Apple Store (U.S.).
Leopard System Requirements
Jaguar 10.2.x, Panther 10.3.x, and Tiger 10.4.x, are no longer available directly from the Apple Online Store, as Leopard 10.5.x, will be the most up to date OS.
But, if you know what to look for, Jaguar Full Retail CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased, sometimes less expensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Caveat Emptor!
If any are currently available, examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
Jaguar On eBay
Panther On eBay
Tiger On eBay
Before upgrading to any OS X version, check to see if your Mac needs a Firmware Update.
If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
This Power Mac G4 Firmware Update 4.2.8 appears to be the one you would need to install.
Once Jaguar 10.2.x is installed, you can use the 10.2.8 Combo Update,
or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version of either OS.
If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.10 Combo Update, to upgrade to the current version.
Jaguar System Requirements
-Power Mac G3 or G4, iMac, eMac, PowerBook G3 or G4, or iBook computer
-128MB of physical RAM
-Supports all video cards shipped by Apple on Mac OS X-compatible systems. Quartz Extreme functionality is supported by the following video cards: NVIDIA GeForce2 MX, GeForce3, GeForce4 MX, or GeForce4 Ti; Any AGP-based ATI RADEON card. A minimum of 16MB VRAM is required.
-QuickTime Pro functionality requires a QuickTime 6 Pro key. The QuickTime 5 Pro key will not work after this software is installed.
-DVD Player requires a DVD-ROM equipped Macintosh with built-in FireWire.
Review these Apple documents for Panther System Requirements
And Additional Panther System Requirements.
Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
Info here Installing Tiger Without A DVD Drive.
And here Installing Tiger Using Firewire Target Disk Mode.
The Tiger Media Exchange Program, referred to in that article, is no longer available.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

HT203477 Project File not Opening. 524MB?!

Hi!
I'm running FCP X on a Retina Display MBPro with 16GB RAM. I work out from a Firewire 800 drive dock since I haven't been able to get a thunderbolt drive yet. In this drive I have several projects (5 of them where created by Plural Eyes for Syncing). One of those projects is the actual film I'm working on around 8min long. The system started giving me problems when I started editing sound effects and putting effects on clips. The film is almost to omplition when FCP crash. I restarted it again but that one project film doesn't open. Instead FCP X stays open on the splash screen and does the pin wheel. I did all the troubleshooting prosedures plus try to fix the project file thinking it was corrupted with a third party application but nothing good has happen yet. I try to open the project on a different system but when I open FCP X it opens on the previews project that was been worked in that system. When you hit to go to the Project Library it start doing the Pin Wheel all over again. I read on the internet of a similar case where the project file was 500MB big. Mine is 524MB. The person said that they wated it off living FCP open doing it's thing and after 8 hours it open. I'm actually doing the same thing right now and I still have almost 6 hours to go. My question is why did this happen and can it be prevented and how to fix the file? Also, is the Apple FCP team dealing with fixing this bugs?

Hi Kodeeswaran,
There could many reasons why this is happening. I would suggest the following steps.
1) Check to see if LabVIEW is properly activated or not.
2) Check if you are an administrator of that particular machine.
3) Try out the steps provided in this KnowledgeBase
4) Has the same set of CDs worked on any other machine where you've tried installing the software. There is every possibility you have a bad installation disk.
Thank you and have a nice day.

Canon cr2 files not recognised in LR4.1

I have Lightroom 4.1 running on a MacBook Air with 10.8.1 OS
It is not recognising the files from my Canon 7D with v 2.00 firmware
The files are recognised however in Bridge v 6
Any solutions?

What is your general work flow? Are you pulling the files directly from the camera? I was having an issue with my new 7D last night where Lightroom insists that it doesn't know what to do with the cr2 files when I was attempting to import them from the camera (Something it happily does with my T3 and has for ages)
However, if I manually dragged the RAW files to their holding directory on the drive myself, and then imported them to Lightroom, everything was just fine.

Canon G7X camera raw files not recognised in Aperture?

I use Aperture 3.5 extensively and have updated to, I think, 6.07 which is the latest update pack but the RAW files are still not recognised in Aperture. Am I doing something wrong or any idea when aperture will be updated for this relatively new camera. Many thanks

The list of cameras that are supported by Aperture is here:
http://www.apple.com/aperture/specs/raw.html
Your camera is not yet on the list, sorry. You'll have to wait for the RAW support to be released. You amy want to use your camera's software to develop the RAW files and to convert them to another lossless format.

I-Movie project file not readable!?!?!

Just did a lot of work in I-Movie 4.0 and had a good 25 min. of almost finished movie and a lot of clips stored in the clip window. This is a project I have been working on for a few weeks. Later when I went to turn I-Movie back on it said the I-Movie project file was not readable. I have never seen this happen. I don't know what I could have done? I was emptying some trash before I turned it off but there is no way I would have erased the movie. How did I corrupt the file? I can access the time line movie through the quicktime file but there are lots of missing sound and I'm missing all the extra clips. How can I get that I-Movie project file to open!?!?!?

It's usually possible to re-open a damaged project by identifying and removing any flawed clips — those that were damaged by emptying the iMovie Trash. I can usually help you do that if you send me a couple files.
This describes what files to send:
http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
That forum Topic also describes the problem, if you wish to learn about it.
Karl

Photoshop touch Project file not recognised

Similar Messages

Maybe you are looking for