Photoshop type sizing in endless error loop

As of 7-12 2013 when re-sizing type, sliding or typing a text size I have to force quit everytime after trying to change ttpe size. It slides up to a very hish number that I did not, or did not try to enter. This is repeatable.

I had this issue and had not saved the file. I am using a Mac with #Adobe PS CS6. as far as #keystrokes, I unplugged the keyboard, held the escape key while plugging it back in and almost somotaneously switched back to my mouse while continuing to hold escape with the other hand. I clicked repeatedly on the bacground text and eventually got a flashing cursor. Once there, I cleared all of the text and repeated the plug-in-out process and finally was able to escape the #dialoge #loop.

Similar Messages

Endless "Stream Overlap" Error Loop Bug Crashes Encore

Endless "Stream Overlap" Error Loop Bug Crashes Encore.
This is the 4 th time I have reproduced the bug.
I burn a Disk image .. and upon completion the "Disk Info" resets to zero bytes under the Build Menu and when checking the Timelines Window the Dialog Box pops up with the "Stream Overlap" Error.
Has anyone else had this issue?
I have read other forum post .. and there is nothing relevant.
I had to rebuild the project twice from scratch.
I'm waiting for my Master Collection 5.5 .. maybe it is fixed in it.

NOTE: There is a issue with Premiere Pro Dynamically Linking with After Effects with file corrupting I am experiencing as well.
Someone offered a solution to rename my files to just words. ( No numbers or other characters )
It still crashes .. and there is still file corruption ... but a "Linked Composition" can be found by "Edit Original" .. whereas it was not found before I changed the filename.
This is a beginning to find the source of the nested bugs.
I am wondering if this filesystem problem is core to the "Stream Overlap" problem noted here.
I have have not reached tech support on the Encore side of this problems as of yet.
This type of file system also has a terrible result for dated files:
On the Mac ( Standard Finder ) :
2011.1.1
2011.1.2
2011.1.9
2011.1.10
2011.1.11
is treated in Adobe Encore as well as other Adobe Suite Master Collection Apps ( On the Mac Platform ) as:
2011.1.1
2011.1.10
2011.1.11
2011.1.2
2011.1.9
This make NO logical sense at all .. and must be some old DOS filesystem?
Timecode
Datestamp
Numbered Outlines
Are all very important ways to organize files / video.
I am surprised that Adobe did not address this years ago.
I have had two Adobe users mention a file system problem that has been known.
Maybe it is the cause of my issues? ... Adobe is mixing two incompatible filesystems on a root level on the Mac platform only. ( Doesn't work with the Mac Finder? )

IPAD 2 is wiped and in endless restore loop with 5.1

I downloaded and installed iOS5.1 about 7 hours ago after being prompted on both my iPad2 and iPhone4S via WIFI. No problem with the iPhone,works great. However, when the iPad rebooted it told me I needed to restore the device, which I attempted to do so over a dozen times on two differnet PC's (office and home) and each time I get an error "The iPad "iPad" could not be restored. An unknown error occurred (1)." I have checked many forunm and sites for help. I tried everything that Apple and other posts suggested but no luck at all in the endless restore loop.
I am really shocked that Apple would release this IOS 5.1 disaster out with any real help or guidance. The worse part is the erasure of all data on the device, including the device name. The ITunes window can't even identify the capacity or serial number. What a cluster.

In case anyone was wondering how this was resolved, I had to ring Apple Support. Secondly, this problem was compounded by the fact that I only backed up to the Cloud, not my PC. Stupidly, on my iPad after it lost all it's data, I clicked on 'sync to the Cloud', which overwrote my good backup.
I had to set my iPad in iTunes up as a new iPad, and move everything back over. From now on I am only going to sync to the PC.

ICloud Setup on Mac post Mavericks upgrade results in endless do loop

iCloud Problems
So you open Internet Accounts - and delete from internet accounts [email protected] (can’t logout)
The dreaded account is gone……..
So now back to System preferences and into the iCloud icon to set User [kaiserja] as default iCloud account and cure the ills of the world.
You go back to internet accounts and get —
Ahhhh grasshopper, we have endless do loop here. Has wasted phenomenal amounts of time. Fortunately, gmail works so I can send and get mail, as do my iPhone, iPad and Exchange accounts. Think I’m going to need to switch personal mail to gmail after investing nearly 12 hours in attempting to set up an apple mail client in OSX Mavericks.
Is there a fix for this or is this just another open bug unresolved?

Rebuilding in this system, so when trying to sign in to iCloud to set up
Proper data entered and the window goes away but nothing happens
Conclude issue is with iCloud setup, so to system preferences and iCloud we go
From there we get sent to internet accounts, after clicking internet accounts, we see the screen below and delete the inactive [email protected]
(BTW have no idea what inactive means. account functions on iPhone, iPad and iCloud over safari)
After deleting the offending user account, we see
All gone so all should be golden, no? So returning to iCloud set up, we get
and opening Internet accounts and entering our apple id leads us back to here....
an obvious and not very helpful statement as I use this account on multiple devices, but just deleted it from here.
Ahhhh grasshopper, we have endless do loop here. Assuming it is keychain related, so I reset my login keychain. Lather, rinse, repeat just like shampoo instructions same errors over an over again.
Has wasted phenomenal amounts of time. Fortunately, gmail works so I can send and get mail, as do my iPhone, iPad and Exchange accounts. Think I’m going to need to switch personal mail to gmail after investing nearly 12 hours in attempting to set up an apple mail client in OSX Mavericks.
Is there a fix for this or is this just another open bug unresolved?
Thanks for any help, ideas or suggestions......

Endless Installation Loop...

Hey,
So, I went and started up boot camp and installed Windows XP Pro (SP2), it said the installation was a success. However, when I restart my computer (without holding option), the screen goes black and boots into windows. Windows then says "PLEASE INSERT SYSTEM DISK AND PRESS ANY KEY TO CONTINUE". When I do, it starts up the install prompt and does the whole thing over again. I have tried numerous partition types (NTFS, FAT32, Leaving it intact, etc.) with no success. Also, when I try holding option, the system ignores me and does its endless installation loop again. I have to hold 3 keys (I forgot what they are, but that's not important) just to get it to boot back into OS X.
So, what do I have to do in order to run Windows Successfully? I have also tried many different install disks, still with no success.
Do you think upgrading my Boot Camp Assistant will help?

The only boot camp assistant version is 2.0 for mac. Boot camp only updates to 2.1 on the windows side. You can try redownloading bootcamp assitant for mac or reinstall mac os again maybe something is wrong?

Flash Builder 4 endless compile loop?

Sometimes my Flex projects get stuck in an endless compile loop. What I mean is, they start building, go to a certain percentage and then restart at 0%. I have to cancel the build process and do a Project, Clean just to get the project built so I can debug.
Anyone else experiencing this? I'm unsure if this is related to having Aptana Studio 1.5.1 also installed on the same eclipse, but that's the only other major plugin I have installed.
David

Hi David,
yup, I know this error. I reproduced it several times.
If you use the automatic binding, by dragging and dropping an EntityService to a Datagrid, some code is added.
For example a definition for the callresponder, a call for this callresponder, a creationComplete for the DataGrid.
If you do this several times and then start you delete some parts of the generated code for bindinng, the described error happens quit quickly!
Then you do not(!) get a clear compile error, but it compiles for ever .
You can solve this in two ways.
Take this project out of your workspace ( you do not habe to delete it from disk).
Find the still existing code snip, that produces the error and delete it and use clean compile. To find the error is tricky!!! because DataGrid3 belongs to Callresponder 2 and so on and you don not(!) get clear messages from the compiler.
I use the automatic code generation, but do not use the automatic binding. Then this kind of error does not happen any more!
Hope this helps!
Martin Zach
P.S: This has nothing to do with Aptana.

Macbook pro endless startup loop

This is weird.
My Mac book Pro will not startup but goes into an endless startup loop, shutting down and trying to start over and over.
I cannot archive and install from 10.5 disc.
But when I insert the 10.4 disc and restart twice my regular 10.5 comes up and acts ok.
Anyone with a clue?

this is the kind of problem I've been having with a 4 day old MB 2.2, 13", 10.5.2. I really don't want to have to buy disk Warrior, though a great product and have several versions over the years (has saved my butt more then once). I am thinking the problem is somewhere between parental controls (which I have on since this is my daughters computer and is the startup account) and maybe spot light doing its initial indexing but never quit getting finished before computer is shut down.
I have reinstalled from disk that came with computer 10.5.1 and done all current updates to 10.5.2, 4 times now at a cost of about 4hrs per install. Can not install and archive, get an error message. Applecare could not help - tried resetting pram and tried reinstalling system. Can't boot into minimal system startup. Disk is o.k. per disk utility.
I've seen many posts regarding parental control problems and some regarding endless start up but not both together. Anyone have thoughts of other things to try? Anyone think the two might be related? Computer will be going back in next 24-48hrs if problem isn't resolved

Endless Boot loop on the new 2011 MacBook Air

Has anyone experienced the Endless Boot loop syndrome on the new 2011 MacBook Air?
Mine is the 13" 4/128 model.
Tried the SMC reset but to no avail!
Am I the first one on earth?
Please help, Apple world!

It's not a hard core gaming rig, but it plays all the FPS games I like, quite well. It handles hi-def video, just fine. I use it for Photoshop, and it is quite fast. For web browsing, it has no equal. The 2010 maxed out 11" would do it all, except for some hi-def video (1080P), which it would stutter. But my new 2011 maxed 13", is perfect for video (1080P=no problem).
I really don't think a MBP will give you as much, on a daily basis. It (the MBP) has only a few advantages, and except for the built in optical drive (which you can still go external, if need be), none of the advantages you will miss even slightly.
I think the MBP would only serve me, if it spent most of the time deskbound, but I would still need an SSD. Once you have had an SSD, you can't go back. Then, you would have a really pricey MBP.

Stuck in an endless authorization loop...

Just downloaded DEATH RACE 2000 -- a personal favorite -- using iTunes 7. When I try to watch the movie, I get a gray screen and a dialog telling me that this computer is not authorized to play the M4V file... although this Mac IS authorized. OK, no big deal, I'll just play along... eventually, a dialog appears informing me that my Mac is now authorized. However, there's STILL no audio or video, although the progress bar is moving so the movie is supposedly playing.
Close iTunes, open it again, same story. Even tried running it from the iTunes Movie folder, and the same error occurs.
Is anyone having this same problem with movie downloads?

I am having the same problem...Authorized music plays fine, but no purchased video will play, I go into the endless authorization loop that you speak of.
Anyone have any ideas?
MacBook Pro 2.16ghz Mac OS X (10.4.7)

Stuck In Endless Restart Loop *HELP*

I tried to download 7digital and my phone is now in an endless restart loop and it will not load my phone! I even did a battery pull!
Torch 9800
O/S 6

BBSAK might be ale to nuke it so you can.
Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)

Hi,
I get this error randomly when i run my VB 6.0 application which calls Photoshop CS2 actions. I went through many forums, but could not manage to get the right solution for this.
"The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
OS: WIndows Server 2003 SP2
Photoshop CS2
ANy help on this will be highly appreciated.
Thanks in advance,
Smiley

I see this sort of error notice in Bridge and Photoshop, preceded by the message " Photoshop (or Bridge) has encountered a problem and must close. Tell MS.
Yes or No."
It most frequently happens in PS when running Dfine 2.0. I have no clue what triggers the Bridge closure. It happens randomly.
CS3, so nobody gives a tinkers dam, I suppose.
I see this kind of message in software testing on a regular basis. Of course, when the test is under way, the software is generating a detailed log file which we package up as part of a bug report. Then at the bug scrubs, lively discussions ensue as to who has to fix what!
I can only image what would happen if the Dfine people and the PS people had to sit through one of those!

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

How to change P.O. duplication message type from warning to error for Order

Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, Jin

Thanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin

Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

Bump
I am also having the same issue with a lot of the softwares i have downloaded. Its unable to download the initial patch update.

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop type sizing in endless error loop

Similar Messages

Maybe you are looking for