Photoshop unable to identify D drive

Hello,
I've got photoshop CC and when I check Edit>preferences>performance, the C drive is visible (SDD disk) and also the external HD is visible, but not the D Drive. I already checked the discussions about assigning rights to the disk, but the rights are fine and all boxes are checked 'read and write'. So is there another solution maybe to let Photoshop know there is a D drive? Thanks in advance, with regards,
Marcel

Yes of course,
My system specs are:
-Windows 7, Processor: Intel(R) Core (TM) i7-3770 CPU 3,40 GHz, RAM= 8 GB, 64 bit system.
-The C drive is the SSD card and the local drive is drive D.
So this last drive is not recognized by Photoshop
as a scratch disk. My exernal harddisk is visible tough.
I´m wondering wether or not Photoshop will perform better if the program can make use of the local D Drive and what could be te reason that Photoshop doesn´t recognize this disk? Thanks in advance,
with regards, Marcel

Similar Messages

Photoshop unable to identify second scratch disk

Hello,
I've got photoshop CC and when I check Edit>preferences>performance, the C drive is visible (SDD disk) and also the external HD is visible, but not the D Drive. I already checked the discussions about assigning rights to the disk, but the rights are fine and all boxes are checked 'read and write'. So is there another solution maybe to let Photoshop know there is a D drive?
My system specs are:
-Windows 7, Processor: Intel(R) Core (TM) i7-3770 CPU 3,40 GHz, RAM= 8 GB, 64 bit system.
-The C drive is the SSD card and the local drive is drive D.
So this last drive is not recognized by Photoshop
as a scratch disk. My exernal harddisk is visible tough.
I´m wondering wether or not Photoshop will perform better if the program can make use of the local D Drive and what could be te reason that Photoshop doesn´t recognize this disk? Thanks in advance,
with regards, Marcel

Check your disk management. There may be a conflict with another drive or the partition be specifically used in some way e.g. for system restore.
Mylenium

Photoshop unable to identify second scratch disk 'D'

Hello,
I've got photoshop CC and when I check Edit>preferences>performance, the C drive is visible (SDD disk) and also the external HD is visible, but not the D Drive. I already checked the discussions about assigning rights to the disk, but the rights are fine and all boxes are checked 'read and write'. So is there another solution maybe to let Photoshop know there is a D drive?
My system specs are:
-Windows 7, Processor: Intel(R) Core (TM) i7-3770 CPU 3,40 GHz, RAM= 8 GB, 64 bit system.
-The C drive is the SSD card and the local drive is drive D.
So this last drive is not recognized by Photoshop
as a scratch disk. My exernal harddisk is visible tough.
I´m wondering wether or not Photoshop will perform better if the program can make use of the local D Drive and what could be te reason that Photoshop doesn´t recognize this disk? Thanks in advance,
with regards, Marcel

Check your disk management. There may be a conflict with another drive or the partition be specifically used in some way e.g. for system restore.
Mylenium

HT201064 I AM UNABLE TO INSTALL ADOBE PHOTOSHOP VIA MY APPLE EXTERNAL DRIVE TO MY MACBOOK PRO

I AMM UNABLE TO INSTALL ADOBE PHOTOSHOP VIA MY APPLE EXTERNAL DRIVE TO MY NEW MACBOOK PRO, DOES ANYONE HAVE ANY HELP?

Please don't use all Caps, it is considered shouting in forums.
Please explain your problem in more detail.
Thanks
pete

Torrentflux 2.4 (ADONewConnection: Unable to load database driver)

I'm trying to setup Torrentflux 2.4 on my server.
I used the torrentflux PKGBUILD vom AUR: http://aur.archlinux.org/packages.php?ID=1664
I set up Apache/MySQL/PHP following the guide. PHP test script is working fine:
<?php phpinfo(); ?>
I setup a symbolic link from /srv/http to my /opt/torrentflux
ls /srv/http/
insgesamt 4
-r--r--r-- 1 root root 20 6. Mär 21:23 test.php
lrwxrwxrwx 1 root root 17 6. Mär 21:07 torrentflux -> /opt/torrentflux/
When I try to open /torrentflux/login.php in my webbrowser it says
ADONewConnection: Unable to load database driver ''
I left the default in torrentflux' config.php:
$cfg["db_type"] = "mysql"; // mysql, postgres7, postgres8 view adodb/drivers/
ls /opt/torrentflux/adodb/drivers/
insgesamt 532
-r--r--r-- 1 root daemon 20476 6. Mär 20:44 adodb-mysql.inc.php
-r--r--r-- 1 root daemon 25340 6. Mär 20:44 adodb-mysqli.inc.php
-r--r--r-- 1 root daemon 3220 6. Mär 20:44 adodb-mysqlt.inc.php
I'm pretty new to the whole LAMP stuff, so can please any1 tell me what's going wrong?

Ok, some questions:
1. Did you enable mysql in php.ini?
http://wiki.archlinux.org/index.php/LAMP#MySQL
2. Did you read / follow the torrentflux installation guide included with the installation?
(if not, check here: http://www.torrentflux.com/)
3. I have not worked with the package from AUR, the package form the official site (again, http://www.torrentflux.com/) works well for me. Did you try this?

Unable to Load USB Driver in LV for Total Phase's Aardvark I2C adaptor

I have tried to instal Total Phase's Aardvark I2C USB driver for LabVIEW on two computers and two versions of LV (8.5 and 7.1) without success. The Windows driver seems to be working fine as their command center gui terminal-esque program works without a hitch, but the LV DLL doesn't seem to work.
Attached is the very simple vi to find connected Aardvark USB devices (aa_find_devices). It always returns the same error code, 8002, which resolves to:
AA_UNABLE_TO_LOAD_DRIVER
-2
unable to load USB driver
From their documentation: http://www.totalphase.com/docs/aardvark_datasheet/sect005/#s5.9
This looks like perhaps the LabVIEW DL, "aardvark.dll" maybe having a versioning issue. So my question is this: Using LabVIEW, how does one debug dll dependencies and resolve issues like this? Do I need the source code for the lib?
Cheers,
Joe Gorse
Solved!
Go to Solution.
Attachments:
find_devices.vi ‏11 KB

Dear Joe,
Let me start off by apologizing for the inconvenience you
have gone through. I am an engineer at Total Phase. We are
working on fixing this issue for our next release of the
Aardvark LabVIEW Driver. This forum post was only brought
to our attention today. In the future, you can also let
Total Phase know about these kinds of issues by emailing
[email protected] We are very responsive through
email or phone.
The problem you are experiencing has to do with versioning
issues between our DLL and USB driver. Specifically, DLLs
before v5.xx must use the older version of our USB driver.
By replacing the DLL from our latest version of Control
Center, you have effectively upgraded the DLL that the
LabVIEW driver is using and made it compatible with v2.xx of
the USB driver.
The most likely reason that smercurio_fc did not see a
difference between the DLL in Aardvark Control Center and
the LabVIEW driver is because he is using an older version
of Control Center and correspondingly an older version of
the USB driver.
The reason that we have not packaged the LabVIEW driver with
latest DLL is due to the fact that a few functions have
changed their function prototypes (for example aa_open_ext
and aa_spi_write), and the VIs have not yet been updated
accordingly. Although updating the DLL solved your USB
driver issue, it introduced this new issue. If you try to
use these certain VIs, LabVIEW will error out.
We are currently working on updating the LabVIEW drivers to
work cohesively with the new DLL and USB driver, and this
should be available soon. If you need immediate
availability to the functions with new prototypes you will
have to change it manually. The other recommended option is
to simply revert back to the DLL that is packaged with our
LabVIEW driver and downgrade the USB driver back to v1.xx.
I will make sure to post again once the update is released,
and I once again apologize for the inconvenience.
Best regards,
Etai

Urgent... unable to load JDBC driver

i have developed a servlet which will establish connection to mySQL.. but it couldn't load the JDBC driver even i placed
[ mysql-connector-java-2.0.14-bin.zip ] in [ C:\j2sdk1.4.2_05\jre\lib\ext\ ]
in fact.. it work fine b4 i format my notebook.. anyone can help me??
pls note that i using APACHE TOMCAT and mySQL 3.23
pls help.. very urgent one
the following is my servlet code.....
import java.io.*;
import java.text.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class LoginServlet extends HttpServlet {
static final String dbURL = "jdbc:mysql://localhost" ;
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException {
Connection conn = null;
String nextJSP = null;
try {
Class.forName("org.gjt.mm.mysql.Driver");
catch (ClassNotFoundException e) {
throw new ServletException("Unable to load JDBC driver");
}

i already add new variable in environment variables
variable name = CLASSPATH
variable value = C:\j2sdk1.4.2_05\jre\lib\ext\mysql-connector-java-2.0.14-bin.jar;
but the same output is come up.. still unable to load my JDBC driver in TOMCAT... y?

Unable to identify the exchange protocol of the message (sync AS2 MDN)

Hi,
We got the following error:
Description: Unable to identify the exchange protocol of the message
StackTrace:
Error -: AIP-50080: Exchange protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1367)
     at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2370)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1813)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1152)
     at oracle.tip.adapter.b2b.xmlgwIntg.XMLGWIntegration.raiseOutboundMessage(XMLGWIntegration.java:168)
     at oracle.tip.adapter.b2b.xmlgwIntg.Outbound.onMessage(Outbound.java:297)
     at oracle.jms.AQjmsListenerWorker.dispatchOneMsg(AQjmsListenerWorker.java:316)
     at oracle.jms.AQjmsListenerWorker.run(AQjmsListenerWorker.java:129)
     at java.lang.Thread.run(Thread.java:534)
Here is the Wire message (sync MDN)
=======================
Message-ID=<23033756.391232032071968.JavaMail.SYSTEM@INUBITTEST>
Subject=Your ORDERS AS2
[email protected]
Content-Length=1347
MIME-Version=1.0
Server=Apache
Date=Thu, 15 Jan 2009 15:07:52 GMT
Content-Type=multipart/mixed;      boundary="----=_Part_53998_23619909.1232032071968"
[email protected]
------=_Part_53998_23619909.1232032071968
Content-Type: text/plain; charset=UTF-8; name=test.txt
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=test.txt
Message-ID: <17080722.371232032071906.JavaMail.SYSTEM@INUBITTEST>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=disposition-notification;
     boundary="----=_Part_53997_14786767.1232032071906"
AS2-Version: 1.1
AS2-From: test_AS2
AS2-To: as2me
------=_Part_53997_14786767.1232032071906
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
MDN for Message ID: <33156:4:0:137@as2me>
From: as2me
To: test_AS2
Received on: Thu, 15 Jan 2009 16:07:51 +0100
Status: processed
Comment: This is not a guarantee that the message has
been completely processed or unterstood.
------=_Part_53997_14786767.1232032071906
Content-Type: message/disposition-notification
Content-Transfer-Encoding: 7bit
Reporting-UA: inubit Integration Server
Original-Recipient: rfc822; test_AS2
Final-Recipient: rfc822; test_AS2
Original-Message-ID: <33156:4:0:137@as2me>
Disposition: automatic-action/MDN-sent-automatically; processed
Received-Content-MIC: 5kFOLMXOUurpm6DUTA8IMRj5gcs=, sha1
------=_Part_53997_14786767.1232032071906--
------=_Part_53998_23619909.1232032071968--
============================
The communication with our TP is going well, we are able to send, receive messages over AS2 and send back MDN, but we are not able
to receive their MDN.
Edit:
It seems that after the latest MLR patch, the error changed to [IPT_HttpSendError] HTTP encounters send error :. Premature EOF encounter but the roots seem to lead to the problem with MDN as B2B is sending the message a couple of times now and gives the mentioned EOF error.
Please advise,
Thank you
Edited by: Kamil Zadora on Jan 30, 2009 3:44 AM

Hi Ramesh,
Yes, agreement uses AS2 IDentifiers. Incoming messages are recognized correctly, and we send back sync MDN that is correctly received by our TP. They also recieve our messages correctly although Oracle B2B does not recognize the MDN from them. I think that this causes that, now after applying the latest MLR patch, B2B tries to send it around 6 times and gives the Unexpected EOF error.
Thank you for your help in advance,
Kind regards,

How can I install Photoshop CC on my D drive? Thanks!

How can I install Photoshop CC on my D drive? Thanks

Hi Jim,
You need to change the preferences in the Creative Cloud desktop from default to: D:\

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

How do I install photoshop elements without a disk drive

How do I install photoshop elements without a disk drive. My Mac does not have one and have just bought Elements

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I boug

Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

QTP unable to identify objects in a flex application

Hi,
I am having an application that runs on flex 3.6 SDK. I am trying to automate the same using QTP 10.0, but, I am unable to identify the objects. I have installed the Flex 4.5 add-in, but still unable to recognize objects.
Upon browsing some forums, i found that I need to compile the files "automation.swc, automation_agent.swc, automation_dmv.swc, qtp.swc, automation_flashflexkit.swc" by including them in <include-libraries> ...</include-libraries> tags in "flex-config.xml" file present under "C:\Program Files\Adobe\Flex Builder 3 Plug-in\sdks\3.6.0\frameworks". We did that, but still, not able to identify objects.
It would be of great help to me if any some one could tell if I am missing out anything ?

hello,
not only need the objects be enclosed by their parent frame, but they also need to be "on top of it" ... meaning if you imagine your report layout as a set of layers that you look at from the side, your "layout surface" would be the bottom most layer and then all objects would be layered on top of each other. in this view, only objects that are in layers above a particular frame can become its children. after that the relationship is determined whether or not an object is inside a frame or not.
you might want to check your object navigator to see whether or not the particular objects are actually in the right place in the hierarchy.
thanks,
ph.

Unable to create a Driver object from driver with Media type string CTC PHO

Hi All,
I am trying to develop a siebel cti adapter for avaya.
I have loaded a custom dll into siebel server but it is throwing error "SBL-CSR-00500: Unable to create a Driver object from driver C:\Mydriver\cti.dll with Media-Type-String CTC Phone ".
It has been long time without any progress.
Please help
Thanks
Nishant

Hi tomhowell,
According to your description, my understanding is that you got an error when you created a site from a custom site template after migrading SharePoint 2010 to your server.
Did you have the original solution file of the site template? Please re-deploy the solution to your SharePoint site, then create a site from the new site template, compare the result.
Also use SPDisposeCheck to indentify the memory leak:
http://archive.msdn.microsoft.com/SPDisposeCheck
http://www.fewlines4biju.com/2012/11/detected-use-of-sprequest-for.html
Here are some similar posts for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
http://social.msdn.microsoft.com/Forums/en-US/50ce964f-94a6-4fda-abc0-caa34e7111f1/error-detected-use-of-sprequest-for-previously-closed-spweb-object-occurs-when-new-site-gallery
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Siebel database Configuration wizard unable to identify index tablespace

Hi,
I'm installing Siebel CRM 8.1.1 on AIX platform. We have RAC enabled database at backend and in that two tablespace has been created, one for data and another one for index. Now in the database configuration wizrd where we have to provide the name of both tablespaces; we provide the name of data tablespae in the Table Tablespace filed and index tablespace in the index tablespace filed of the configuration wizard. Now when we click on the next button. The configuration wizrd gives error of unable to identify index tablespace.
Why is this happening as index tablespace is properly created in the database. Please help me in this. You quick respance will be highly appriciated.
Regards,
Abbasi

I thought it might be. grantuser.sql generally needs to be modified to suit the underlying database configuration. Glad you got it working.

Photoshop unable to identify D drive

Similar Messages

Maybe you are looking for