Photoshop upgrade procedure

I've been moaning about this since photoshop 6 days. Why is there no automatic upgrade procedure in the photoshop installer?
WOuld it bee too difficult for the installer to ask you whether you wanted to import brushes, gradients, patterns, actions, presets, workspaces...?
If there is a quick way of doing this other than using the presets manager, I'm all ears.
(ditto: illustrator, indesign). If dreamweaver can do it...

That's a bit extreme. Photoshop CS5 is actually VERY compatible with actions from past versions.
-Noel

Similar Messages

Upgrade procedure from 4.6c to ECC 6.0

Hi
I had gone through SAP solution browser tool and observed the differences for 4.6C and 6.0
Can u please let me know How to start and end the upgrade project i.e sequence of activities.
1) should the configuration be done in ECC 6.0 same as 4.6C?
2)master data upload?
3)Z-objects movement from 4.6C to 6.0....?
4)Open PO's and stock upload......in ECC 6.0 ?
5) what are the precautions to be taken before Go-live?
Please send any links for upgrade procedure from 4.6C to 6.0 i.e sequence of activities.........
Thanking you
Deepak

Hi,
About your questions:
1) should the configuration be done in ECC 6.0 same as 4.6C?
The configuration (if you mean how the system is configured from the Basis point of view) will be almost the same as you had in 4.6C. Of course you will find new aspects you don't have in the old version (for example the integrated ITS, ICM, etc.), but you will have the system running after the upgrade.
2)master data upload?
Master data will be adapted to new version during the upgrade. Unless you need fresh data, you won't need to reload master data.
3)Z-objects movement from 4.6C to 6.0....?
Z objects are not touched by the upgrade process. It's your responsibility to keep them running after the upgrade.
4)Open PO's and stock upload......in ECC 6.0 ?
Same as question 2). Business data remains in the system after the upgrade.
5) what are the precautions to be taken before Go-live?
It is recommended to carry out functional tests, as well as connection tests with external interfaces. In any case, you shouldn't take any special precaution, at least not so different from those you would take in a normal installation.
Regards
Francisco

Photoshop Upgrade

I just ordered the Photoshop upgrade from CS5 Extended Student/Teacher addition to Photoshop CS6, but I meant to order the Photoshop CS6 Extended Student/ Teacher addition. How can I fix this?

Hello MorganGina,
I have opened a refund case regarding your request for the product you bought yesterday.
I would like before going forward and before proceeding to the refund, please deactivate the CS6, please follow the instructions for the deactivation :
You have to be connected to the Internet.
- In the application, choose Help > Deactivate.
Please let me know when you will have deactivated the product in order to proceed to the refund.
Thank you.
Arnaud.

Photoshop upgrade, do i need to unistall ver 9 or should i, after installing ver 12.

photoshop upgrade, do i need to uninstall ver 9 or should i? after installing ver 12.

No, if asked for qualifying product use PSE 9 s/n

Hello there. please help me. I thought I have made another plan for photoshop upgrading it for a lig

hello there. please help me. I thought I have made another plan for photoshop upgrading it for a lightroom package for 22, 00 reals past year and indeed I was able to download the new package. and that the previous subscription I had for only photoshop would be automatic canceled. but looks like I have been paying for both, as get 2 receipts in my mailbox every month. one for $19,00 and another from a company called Digital River do Brasil Ltda, um revendedor de comércio eletrônico aprovado pela Adobe.. can please put me on the right track on this one? thanks val

If it is not accepting another payment method then contact iTunes support here:
https://getsupport.apple.com/Issues.action

What is the upgradation procedure

In orion we have autoupdate.jar which gives seemless update of the server. Is there any such functionality with OC4J?

Hi,
the autoupdater.jar is Orion specific and has been removed from OC4J. My best guess is that the upgrade of OC4J will follow the normal upgrade procedure for Oracle products.
//Andy

Recommended Solaris package upgrade procedure

We would like to know the recommended Application Package upgrade procedure. We followed the procedure as defined in the Application Packaging Developer's Guide.
Currently we followed the following procedure during upgrade:
1. Check if old version is available.
2. If it is available execute the pkgrm command to remove the old package as indicated in the Application Packaging Developer's Guide. But since the package names are same and we are executing the pkgrm command from the preinstall script, in some systems it's not allowing to remove the old package since it's executed from pkgadd command scope. The following error message is displayed while package verifying step is executed
[ verifying class <none> ]
pkgadd: ERROR: missing entry in contents file for </opt/XXXXxxxx/jre>
3. We cannot manually remove the old package first since it will completely wipe out the file. We need to migrate some of the files from old release to new. So we need the old files during upgrade.
Please suggest a suitable procedure to handle this.
Some more details about the OS:
1. uname -a
SunOS rduipv6 5.10 Generic_142900-03 sun4u sparc SUNW,UltraAX-i2 Solaris

Hi.
I can't say how Oracle recomend. But I see that for update main part of Sun Product used two ways:
1) Documentation say that user should remove all previos version of product by hand.
2) Used extarnal installation tool that do it automaticaly, but not as part package installation script (pre/postinstall ).
Regards.

I paid $69.00 plus $14.99 for Photoshop upgrade. I need you to send me the link for upgrade.

I paid $69.00 plus $14.99 for Photoshop upgrade. I never did receive a link to upgrade. Please help.

Hi there
Are you perhaps referring to your order for Photoshop Elements 13 from 11 Feb?
Please check this doc for details on how to find and download your order: Find a download link on Adobe.com
Thanks
Bev

GSS OS upgradation procedure

Hi,
Could any one send the document for GSS os upgradation procedure.

Take a look here:
GSS - Upgrade Instructions:
http://tools.cisco.com/squish/f8f0B
GSS - 3.1(x) Release Notes
http://tools.cisco.com/squish/0b60c
GSS Software Download Site:
http://tools.cisco.com/squish/7b4337
Joel Lamousnery
TAC Customer Support Engineer

Upgradation procedure for ALE/IDOCS

Can anyone let me know what is the upgradation procedure for ALE/IDOCS and what are the steps needs to be checked out during technical remediation part of version upgrade(lower version to ECC6.0)?

IDocs are backwards compatible, so I don't think you need any special procedures for them, just a regular test, to make sure everything stull works fine. If you've had extended any standard IDocs, that part will need to be reviewed, as any other custom development.
However, there might be a newer version of the IDoc type available in ECC 6.0, which you didn't have in the previous release. You might want to see if there would be any benefits in switching to the newer version.
I'm sure you'll find all the information on the Upgrade page on SAP's [web site|http://service.sap.com/upgrade]. Also there is an SAP Press book on the subject.

NM-CE-20 Content module - upgrade procedure and ftp help

Our netmodule has been successfully installed and working. Its currently running 4.2.3 and we would like to upgrade it the latest 5.1.9.5 rev. I cannot find a working procedure for doing this. When I attempt to ftp into the module's IP I get a error stating it can't set guest priviledges. When telneting into the module and doing a "DIR" I get: nothing. Anyone help me out? Is upgrading to the 5.x supported?
Brian

To see if the version you want is supported with this hardware, check the release note
http://www.cisco.com/en/US/products/sw/conntsw/ps491/prod_release_note09186a00802664f0.html#wp107167
Looks like the 20G module is not listed.
However it is supported in 5.0.15
http://www.cisco.com/en/US/products/sw/conntsw/ps491/prod_release_note09186a0080234dcc.html#wp42371
The upgrade procedure is the same for any ACNS device.
So, follow the procedure described at :
http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a0080131e84.html#1041204
Regards,
Gilles.

Help with cisco ISE 1.1.2.145 patch-3 to ISE 1.2.0.899-2-85601 upgrade procedure

Need help from ISE experts/gurus in this forum.
Due to a nasty bug in Cisco ISE (bug ID CSCue38827 ISE Adclient daemon not initializing on leave/join), this bug will make the ISE stopping working completely and a reboot is required (very nice bug from cisco) . This leaves me no choice but to upgrade to version 1.2.0.899-2-85601.
Scenario:
- 4 nodes in the environment running ISE version 1.1.2.145 patch 3
- node 1 is Primary Admin and Secondary Monitoring - hostname is node1
- node 2 is Secondary Admin and Primary Monitoring - hostname is node2
- node 3 is Policy service node - hostname is node3
- node 4 is Policy service node - hostname is node4
Objective: Upgrade the ISE environment to ISE version 1.2 with patch version 1.2.0.899-2-85601.
My understand is that I have to upgrade the existing environment from ISE version 1.1.2.145 patch 3
to ISE version 1.1.2.145 patch 10 (patch 10 was released on 10/04/2013) before I can proceed with
upgrading to ISE version 1.2 and patch it with 1.2.0.899-2-85601.
Can I patch my exsiting environment from 1.1.2 patch 3 to patch 10 prior to upgrading to version 1.2.0.899-2-85601?
I look at Cisco website and patch 10 was released on 10/04/2013 while version 1.2 was released back in 07/05/2013.
I am trying to get a definite answer from Cisco TAC but it seems like they don't know either.
Question #1: How do I proceed with upgrading the current ISE environment from 1.1.2.145 patch 3 to 1.1.2.145 patch 10?
Propose solution:
step #1: make ISE node1 to be both Primary Admin and Primary monitoring. ISE node2 is now Secondary Admin and Secondary Monitoring.
         Then go ahead and apply ISE version 1.1.2.145 patch 10 to ISE node2 via the GUI,
step #2: Once ISE node2 patch 10 is completed, make node2 Primary Admin and Primary Monitoring. At this point, apply ISE 1.1.2.145 patch 10
         to ISE node1 via the GUI,
step #3: Once ISE node1 patch 10 is completed, make node1 Primary Admin and Secondary Monitoring and node2 Secondary Admin and Primary Monitoring,
step #4: apply ISE 1.1.2.145 patch 10 to ISE Policy Service node3. Once that is completed, verify that node2 is working and accepting traffics,
step #5: apply ISE 1.1.2.145 patch 10 to ISE Policy Service node4. Once that is completed, verify that node2 is working and accepting traffics,
Question #2: How do I proceed with upgrading the current ISE environment from 1.1.2.145 patch 10 to ISE version 1.2 with patch version 1.2.0.899-2-85601?
Propose solution:
step #1: Make ISE node1 the Primary Admin and Primary monitoring. At this point ISE node2 will become Secondary Admin and Secondary Monitoring
step #2: Perform upgrade on the ISE node2 via the command line "application upgrade <app-bundle> <repository>". Once ISE node2 upgrade is completed, it will
          form a new ISE 1.2 cluster independent of the old cluster,
step #3: Perform upgrade on the ISE Policy Service node3 via the command line "application upgrade <app-bundle> <repository>". After the upgrade the ISE
          Policy Service Node3 will automatically joins the ISE node2 which is already in version 1.2
step #4: Perform upgrade on the ISE Policy Service node4 via the command line "application upgrade <app-bundle> <repository>". After the upgrade the ISE
          Policy Service Node4 will automatically joins the ISE node2 which is already in version 1.2
step #5: At this point the only node remaining in the 1.1.2.145 patch 10 is the ISE node1 Primary Admin and Primary Monitoring
step #6: Check and see if there are any more PSN's registered in ISE node1 (there should not be any)
step #7: Perform the upgrade on the ISE node1 from command line "application upgrade <app-bundle> <repository>"
step #8: Once upgrade on ISE node1 is complete, ISE node1 will automatically join the new ISE 1.2 cluster,
step #9: Make ISE node1 Primary Admin and Secondary and ISE node2 Secondary Admin and Primary Monitoring,
Question #3: How do I proceed with upgrading the current ISE environment from 1.2 patch0 to 1.2.0.899-2-85601?
Propose solution:
step #1: make ISE node1 to be both Primary Admin and Primary monitoring. ISE node2 is now Secondary Admin and Secondary Monitoring.
         Then go ahead and apply ISE 1.2.0.899-2-85601 to ISE node2 via the GUI,
step #2: Once ISE node2 1.2.0.899-2-85601 is completed, make node2 Primary Admin and Primary Monitoring. At this point, apply 1.2.0.899-2-85601
         to ISE node1 via the GUI,
step #3: Once ISE node1 patch 10 is completed, make node1 Primary Admin and Secondary Monitoring and node2 Secondary Admin and Primary Monitoring,
step #4: apply ISE 1.2.0.899-2-85601 to ISE Policy Service node3. Once that is completed, verify that node2 is working and accepting traffics,
step #5: apply ISE 1.2.0.899-2-85601 to ISE Policy Service node4. Once that is completed, verify that node2 is working and accepting traffics,
does these steps make sense to you?
Thanks in advance.

David,
A few answers to your questions -
Question 1: My recommendation is to follow vivek's blog since most fixes and upgrade steps are provided there - I would recommend installing the patch that was release prior to the 1.2 release date since the directions to "install the latest patch" would put you at the version of when the ISE 1.2 was released
https://supportforums.cisco.com/community/netpro/security/aaa/blog/2013/07/19/upgrading-to-identity-services-engine-ise-12
You do not have the ability to install ISE patch through the GUI on any of the "non-primary" nodes (you can use the cli commmand to achieve this), the current patching process was designed so you can install the patch on the primary admin node and it will then roll the patches out to the entire deployment (one node at at time). I painfully verified this by watching the services on each node and when a node was up and operational the next node would start the patching process. First the admin nodes then the PSNs.
Every ISE upgrade that I have attempted as not been flawless and I can assure you that I have done an upgrade on 1.1.2 patch 3 and this worked fine, however I used the following process. You will need the service account information that is used to join your ISE to AD.
I picked the secondary admin/monitoring node and made it a standalone node by deregistering (much like the old procedure) in your case this will be node2.
I backed up the certificates from the UI and the database from the CLI (pick the local disk or ftp-your choice).
I reset the database and ran the upgrade script (since I did not have access to the vsphere console or at the location of the non UCS hardware [for a 1.1.4 upgrade]).
Once the upgrade was completed I then restored the 1.1.x database, ISE 1.2 now has the ability to detect the version of the database that is restored and will perform the migration for you.
Once the restore finished, I then restored the certificate and picked one of the PSNs
backup the cert,
Had the AD join user account handy
reset-db,
and run the upgrade script.
Once that is done I then restore the cert
Join the PSN to the new deployment
Join both nodes to AD through primary admin node
Monitor for a few days (seperate consoles to make sure everything runs smooth)
If anything doesnt look or feel right, you can shut down the 1.2 PSN and force everything through the existing 1.1.2 setup and perform some investigation, if it all goes smooth you can then follow the above step for the other two nodes, starting with the last PSN and the the last admin node.
Thanks and I hope that helps,
Tarik Admani
*Please rate helpful posts*

Photoshop upgrade question

I am thinking of buying Adobe Creative Suite 2 for MAC OSX [Creative Suite 2 :Illustrator CS2; InDesign CS2; Photoshop CS2; ImageReady CS2; Cue CS2]. It's cheap - which is what I need. I have bought a MacMini running OS X 10.8 because I got left behind on the PPC powerbook.
I understand that that CS2 is slow, as it's a half way house beteen the two Mac system architectures.
So I found a cheap upgrade [Adobe Photoshop Extended CS5, Upsell Version from Photoshop CS2/CS3/CS4]
But I wonder if this will work as an upgrade to the CS2 one. This one is Photoshop alone, so I don't know if it would upgrade just the photoshop part of the CS2 suite? I only need Photoshop, anyway [the CS2 suite is selling really cheap]
So to be long winded... I hope it makes sense.
Thank you, anyone out there who migt know.
John
PS There's a site selling pretty cheap Adobe products ... I wonder if anyone knows if it's a rip off site??
http://softjet.net/browse/search/?q=photoshop

Hi John, I'm reasonably certain that site isn't all that legit...
Based in the Ukraine btw...
http://www.scamadviser.com/check-website/soft-jet.net
As far as CS2, I doubt it can even be installed on/in 10.8.x

Photoshop Upgrade on a Windows 8 Computer

I bought a new computer with Windows 8 and do not have a previous version loaded. How do I load my registered version of Photoshop 6?

I meant CS6 I have had Photoshop for about 12 years now and have been continuosly upgrading. It is searching for an older qualifying version on my Windows 8 computer and ther is obviously none. Is there a way around this?
[edited by forum host - do NOT post serial numbers! ]

[asr9k cluster upgrade procedure]

Dear CSC (and hopefully Xander):
What is the proper way of upgrading an asr9k cluster?
Do i have to break the cluster and upgrade both 9ks separately? then rebuild the cluster?
Or you just treat the cluster as one box and when you upgrade one of them, both are upgraded simultaneously?
(is there a document that describes this procedure for a cluster specifically?)
Thanks in advance!
c.

Hello Carlos,
you can proceed with the following Cisco's recommendations thanks to Lenin Pedu:
https://supportforums.cisco.com/docs/DOC-34114#13_Cluster_RackByRack_Upgrade_
HTH,
Michel.

Photoshop upgrade procedure

Similar Messages

Maybe you are looking for