Photoshop vs Photoshop elements -which to learn?

Hi,
I am getting started and I don't think I need the full power of Photoshop yet, but on the other hand
I want to invest my limited time wisely.  If I learn to use Photoshop Elements first, will it help, hinder,
or be neutral as far as learning Photoshop later?
If it is better to just grab the bull by the horns then please let me know.
Thank you for your help.

Hello!
From what I've read, some functions are easier to perform in Elements (with help guides) while one needs to use workarounds to perform others that are not included in Elements.
It all depends if you do intend to learn Photoshop anyways... and if you will need the "full version" of Photoshop... what are you tring to do, is it only basic retouching, or will the images go to press printing?
But usually learning an Adobe Software helps in learning others, and Elements is a very close brother to Photoshop...
I would recommend paying a visit to the Photoshop elements forum for their point of view

Similar Messages

  • Be grateful for your help with Photoshop Elements which I have been using for several years.

    Be grateful for your help with Photoshop Elements which I have been using for several years.  Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements.  On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’.  1. Is there a relationship between Elements and My Pictures and is Elements dependant on    the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more?  Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one?  Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop.  I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue.  I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music.  Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

  • The box in my Photoshop Elements, which shows the size and types of brushes has shrunk to one unreadable line. How do I expand the box to its original size?  I have tried dragging it open but nothing moves.

    The box in my Photoshop Elements, which shows the size and type of brushes, has shrunk to one unreadable line. How can I expand this box to its original size? I have tried dragging it open but nothing happens and none of the tool boxes appear to give me an expansion option

    Well, when you open the program, the splash screen, the window you see while the program is opening, should make that clear enough. For example:

  • I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

    I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

    Hi claire.winteringham,
    If you have a 64 bit machine then there shouldn't be any problem while installing any 32-bit software.
    Try to download it with the below mentioned link :
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
    Thanks,
    Atul saini

  • I have lost the Copy of photoshop elements which I purchased online from adobe last may.

    I don't have the serial number for the online purchase I made from adobe. And it is not recorded in my account although there is a record of the purchase. How do I go about downloading another copy of photoshop elements since I lost my copy when my hard drive crashed?

    If you have purchased the product from Adobe (download), the serial number is registered in your account. Please login on the following page:
    https://www.adobe.com/account/sign-in.adobedotcom.html?returnURL=https://www.adobe.com/acc ount/my-products-services.html
    The download is available under "my orders": https://www.adobe.com/account/account-orders.html

  • I have a DVD from The Best of Adobe Photoshop Elements, which requires Firefox 3.+ to opperate. I have down loaded Firefox 3.6, can get on lime but disc will not operate??

    I was able to run the disc previously, a message came on to upgrade, I did and haven't been able to run since. I've installed Firefox 3.6b but can't get disc to operate. Message I now receive says to install 3.+, but not how.
    Have not tried their web yet (next). (Adobe) www.photoshopelementsuser.com

    Ok, let me try to explain step-by-step:
    #The bookmarks are '''not''' in HTML file. This is OK. Firefox does not store the bookmarks in HTML format.
    #Even if you boot the old Firefox, it will show the new bookmarks. This is also OK. You can't really do much about that.
    #Uninstalling and re-installing Firefox will '''not''' solve your problem. Firefox will '''not''' see the bookmarks in the external hard drive. Please '''do not''' try this approach.
    Now, to make things as simple as possible, let's try to bring all of your old bookmarks and settings into the new computer.
    #Make sure that you have closed Firefox completely. This can be done by selecting '''File''' menu and then clicking on '''Exit'''.
    #You said you were able to locate the Profile folder on the '''external hard drive''', right? Just to confirm, the name of this folder is something like xxxxxxxx.default (for example, my Profile folder is named 9qnmvkea.default. Yours will be something similar).
    #Double click on this folder to open it.
    #Select the '''Edit''' menu and click on '''Select All'''. Select the '''Edit''' menu again and then click on '''Copy'''.
    #Now, open Firefox from your new computer and follow the instructions given in this article to locate your new Profile folder: [https://support.mozilla.com/en-US/kb/Backing+up+your+information#Locate_your_profile_folder Locate your profile folder]. Again, this folder would be named like xxxxxxxx.default
    #Once this is done, again close Firefox by selecting '''File''' menu and then clicking on '''Exit'''.
    #Double click on your new Profile folder to open it.
    #Select the '''Edit''' menu and click on '''Paste'''. Windows will ask you if you want to replace existing files with same name. Select '''replace'''. Wait till all the files have been replaced.
    #Open Firefox again from the new computer. Hopefully, you should see your old bookmarks now.

  • Background Task on Adobe Photoshop Elements and Adobe Premiere Elements Organizer "hangs"

    I recently upgraded my software from Elements 10 to Elements 12 and had a bit of trouble.  Apparently both 10 and 12 have a way of launching an executable in the background which tends to get "stuck" on my system.  I believe the problem may be related to the network configuration and software mix I live with, but I need to confirm my suspecions and find a way to control the problem.  Here is what I know... I have always experienced a lot of problems using Elements with my NAS device which is a 1TB usb 2.0 connected disk system attached to my Linksys  E3000 Router.  When I got the router, the BIOS software did not correctly support NTFS file systems, but subsequent updates eventually made this possible if you formatted the removable drive on a system in NTFS, you could then hang it on the router and "see" the contents, serve them via Windows Media Player, or iTunes, etc., etc. from a computer atteched to the network, or via wirless directly off the router.  I archived all my photos out on this file system and have successfully indexed it for use with Adobe Photoshop Elements and Adobe Premiere Elements Organizer, but...  When I went to install Elements 12 software I tried to install it without first removing Elements 10, and on a system which had run Elements 10 since the last full reoboot.  During the install of 12 under "shared services install" the installation process "Hung" on a background task with a name like "AdobeElementsAnalyzer.exe" which only shows up in Windows 7 task manager as a running process, not as a full program, but because the file was locked by the system, the install hung.  I eventually figured out that I needed to start the install of Elements 12 software immediately after having rebooted so that this program was not present in the background, and succeeded in completing an install of Elements 12 on my Windows 7 X64 system.  This system required a "special" software download for Premiere Elements, but not for Photoshop Elements which is only apparently avaliable under 32bit emulation mode.  I finally got the "shared components" portion of the X64 Premiere Elements to complete an install, and then set about verifying the onversion/upgrade of the indexes to my photos and video stored out on the NAS.  The same rogue task which prevented me from doing the install showed up agian, taking all the system resources away from my dual processor Intel chip and refusing to let go.   I was forced to terminate it from the task manager.  I strongly suspect that my "issues" are in part due to the extrordinary network latency imposed by the drive connection I'm using to index my photos and videos, and I'm looking for a better approach to using the editors against my master catalog of files, as well as figruing out just what I need to do to insure that all the files I have stored on the drive are accessible by the organizer when I need to pull a copy to work on.
    A complication is that I have two "legacy" Windows XP systems on my network, a reasonably fast Windows Vista Business desktop, and the Windows 7 X64 processor system which is the most powerful system I have.  The Windows file security enhancements to NTFS changed from XP, to Vista, to Windows 7, so files which get saved to the NAS disk inherit a variety of different levels of security under windows.  I have occasionally gone to one of my old XP boxes and "wiped" the security settings by resetting everything via Windows XP.  Because the NAS is so slow, this process can take several hours and must not be interrupted by attempts to do anything affecting the NAS by any of my other networked computers.  To avoid problems with my photo archive, it makes sense to me to do all my editing on copies which have been extracted from the NAS archive and stored on the C: drive (boot drive) of my Win X64 system. 
    What I seriously need to know is this:  When/If I define a "watched" portion of my file system, rather than taking the time to manually import every little change to my photo archives, can I expect the Photoshop Elements Organizer to work properly as long as everything stored on the NAS is stored via the same system which runs Elements with the same active "user" in control so that all the windows 7 file security settings putting stuff on the mapped NAS drive remain properly secured under Win 7 X64?  Frankly I don't care if the files appear "read only" to every other system and identity on my network, but I do need to be able to "see" them.  I have been able to view slide shows and movies stored on the NAS via both my networked iPad, my Apple TV, and using Samsung's funky android and Windows compatible software.  Frankly, I doubt that Microsoft or Apple has full understanding and control of the environment where there is no host "server" other than the eprom based stuff my Linksys E3000 loads to emulate early Windows Media Management architecture, but I mange to get it to work as long as I don't try anything sophisticated with the file permissions.   As a fall back, can I expect individual "imported" bits out on the NAS to remain stable if indexed and used only by the Elements Organizer running on my Win 7 X64 system?
    I am seriously considering converting an old WinXP desktop into a UNIX box which could be configured as a "Server" for everything stored on the NAS and be done with my problems in return for the power required to run the server all the time so stuff is there when I need it.  Any recommendations?
    Message was edited by: [email protected]

    Adobe hasn't said whether it officially supports PSE 7 on Windows 7.  But reports are starting to trickle in that PSE 7 works fine on Windows 7 for most people, though a couple people have reported crashes. My PSE 7 seems to work fine, though I primarily use PSE 8 now.  This is all very preliminary, and we'll learn more as more people post here.

  • How do I get a black and white photo in Photoshop Elements 11?

    I have a very old version of Photoshop, release 6 I believe.  In that release, I am able to use enhance/brightness and contrast, and when I slide the contrast to 100%, I get a pure black and white image of my photo.  I Photoshop 11, which I just purchased today, I am unable to get a pure black and white image, only grayscale.  I cut pictures out of wood, and it's fundamentally necessary that I can contrast pictures into pure black and white.  How do I do that in Photoshop 11?  The first screenshot is what I need in Photoshop 11, the second screen shot is the limitation I'm seeing in Photoshop 11.  How do I get a black and white photo??

    (I edited this reply because I originally couldn't see the screen shots.)
    There was a change made a few versions ago where Brightness and Contrast were improved so that they did not clip values so quickly. This was intended to improve how Brightness and Contrast worked for photographs, but it makes it work less well for purposes such as channel manipulations or printmaking.
    In Photoshop there is a Legacy check box in Brightness/Contrast to make it work the "old" way when that is desired. It looks like that check box isn't in Photoshop Elements, which is what you're actually using. I'm not sure if there is a way to get the Legacy behavior in Elements, so you'll want to ask over in the Photoshop Elements forum.

  • Can't select albums with photoshop elements 10 with iTunes 10.6

    I first upgraded Itunesvto 10.6 and the downloaded the trial version of adobe photoshop elements 10, never had any previous photoshop versions.  When I go into iTunes and go under the sync photos tab and select the photoshop elements for "sync from" I can't select albums, only all photos.  I have only two "smart" albums in elements, but I figured they should be seen.
    I tried a solution from another forum, but it did not work.  It was:
    1. Open catalogue in elements
    2. Rename catalogue
    3. Optimize renamed catalogue
    4. Restart iTunes
    This did not work.
    I'd like to avoid manually updating the folders as I really only want to have the previous 3 or 6 months worth of photos on my iPad
    Thanks.

    I solved the mystery. It had to do with the file metadata in the Photoshop Elements catalog. When I moved the catalog (pictures) from my old machine to the new machine, the path (folder location) of the images changed. So, although the catalog had cached thumbnails of the photos to display in Photoshop Elements (which tricked me into thinking that the path to the images was correct), the paths were actually wrong. All I had to do was “reconnect” the missing images (a feature in Photoshop Elements which corrects missing/wrong paths to images) and now everything works correctly (sync in iTunes).

  • I just got Photoshop elements 10 and adobe premiere elements 10, but only downloading Premiere

    I just got Photoshop elements 10 and adobe premiere elements 10, but only downloading Premiere
    out of 5 disc's, it says only use the 3 and 5 for Mac's, but it only downloaded Premeire

    I think each is downloaded seperately.  Need to download the Photoshop elements which if you specify Mac should be the same as disc 3.

  • Photoshop elements 11 albums won't sync

    Photoshop Elements 11 albums won't sync with ipad using iTunes.
    I was using PE10 and synced my albums using iTunes to my iPad 3 iOS 6.0 and 5.1 just fine. (itunes 10.7.0.21) I upgraded to PE11 and it goes into perpetual sync when albums are selected. I deleted some albums and added test albums in PE11 and those changes are not reflected in iTunes.
    I worked with Apple Care for about 2 hours uninstalling all of the Apple software (iTunes, etc) and reinstalling. That did not fix it. Apple declared it an Adobe problem and suggested I call them.
    I worked with Adobe about 45 minutes before they declared it an iTunes problem.
    Any ideas out there?

    I solved the mystery. It had to do with the file metadata in the Photoshop Elements catalog. When I moved the catalog (pictures) from my old machine to the new machine, the path (folder location) of the images changed. So, although the catalog had cached thumbnails of the photos to display in Photoshop Elements (which tricked me into thinking that the path to the images was correct), the paths were actually wrong. All I had to do was “reconnect” the missing images (a feature in Photoshop Elements which corrects missing/wrong paths to images) and now everything works correctly (sync in iTunes).

  • Can't sync photos with photoshop elements 11 album

    I just upgraded to photoshop elements 11. When I attempt to sync photos in iTunes (to synch with my iPhone), Photoshop Elements appears in the drop down and when I select it, it finds all the "albums" in the catalog. However, when I select an album to sync, iTunes indicates 0 photos are available in the album.
    I'm running photoshop elements 11, iTunes 11.0.1.12, Windows 8 Pro.
    Any thoughts?
    Oh, and if I try to sync "all photos and albums" it still reports that there are "0 photos" available to sync.
    I've tried to make new albums, which iTunes "sees" the names, but there are "0 photos" available to sync.
    I've also tried to sync with a folder (file system) which works just fine.
    Any thoughts?

    I solved the mystery. It had to do with the file metadata in the Photoshop Elements catalog. When I moved the catalog (pictures) from my old machine to the new machine, the path (folder location) of the images changed. So, although the catalog had cached thumbnails of the photos to display in Photoshop Elements (which tricked me into thinking that the path to the images was correct), the paths were actually wrong. All I had to do was “reconnect” the missing images (a feature in Photoshop Elements which corrects missing/wrong paths to images) and now everything works correctly (sync in iTunes).

  • Need to download installation file for photoshop elements again (formatted computer) and I have serial number but download file not appearing in my downloads/orders section of account anymore.

    Hi all I needed to format my computer and so need to reinstall photoshop elements which I purchased online. The serial number is in my account but not the installation file to download.. so can't find file to install anywhere and the email address I received from adobe in first place is no longer in use it appears ([email protected])
    Thanks,
    M

    You can download from here.
    Choose the correct version what you have.
    Photoshop Elements:  12 |11, 10 | 9,8,7

  • Photoshop Elements should be bundled in Creative Cloud?

    I am a Creative Cloud subscriber, so I have access the the likes of Photoshop and Lightroom. I am a photographer and I also do communication design and build dynamic websites as Boldset.
    My website customers, in using a website CMS (say Wordpress or Drupal) that we would have built for them, often need to be able to correct and prepare images for the web, and for this Photoshop Elements is useful. So the only reason that I download a trial copy of Photoshop Elements is to learn how to use it (easy), so that I can teach my customers how to use it, so that they ultimately buy and use  this themselves.
    Why would Adobe want to charge a customer for having Photoshop Elements if that customer already has Photoshop? This is my question.
    Greetings from Paris
    David Millner

    They are different programs with different abilities.  Yes, you can probably replicate some of the Guided Edit stuff from Photoshop Elements in Photoshop, but you would need to be more than just a novice.
    I hope that they don't make Photoshop Elements part of Creative Cloud.  If they do, I will no longer upgrade, and they will lose a paying customer.

  • Photoshop Elements 10 Upgrade Version

    I hope this isn't a silly question, but I've been unable to find an answer elsewhere.
    I've never owned any Photoshop products at all before, and my wife bought me PS Elements 10 Upgrade version yesterday.
    Our belief was that PSE10 UV was just the most recent version of Elements, but when the package arrived it says on it 'to install this upgrade successfully you will need a licenced copy of Adobe Photoshop Elements' which of course, we don't have.
    Is it just me being daft or is that worded slightly ambiguously?
    I just don't know whether the box contains PS E 10 that' can work as a new standalone new product or as an upgrade on previous versions' or whether it can only be used as an upgrade to a previous version of Elements..?
    I don't want to open the packaging in case I end up having to send it back and replace with different version...
    Can any kind soul enlighten me please?

    An upgrade version of a product is the full product, but it's license requires a previous version. The idea is that you already own a previous version, so you can buy an "upgrade" version at a reduced cost. When you install, the full product is installed, it does not piggy-back on a previous installation. However, when you license the product, by entering your serial number, an upgrade verification will take place. It will automatically check your computer for a qualifying product already installed. If that cannot be found, it will ask you to enter the serial number from your previous version.
    As you do not have a previous version, you will not be able to pass the upgrade verification, which means you will not be able to license your copy of Photoshop Elements for use on this computer. You will have access to a 30-day free trial, but after that your product would cease to operate.
    You should return this product for a full retail copy rather than an upgrade version.

Maybe you are looking for

  • Is there anyway to put a lock on iphoto?

    I want to put a password lock but only on my Iphoto- is there anyway to do this?

  • A right communication mechanism

    Hi, all, Here is a situation for a client/server application: the server coded in C++; a client is needed, but not browser since its UI is not rich enough. I'm thinking about to have Java client distributed and launched by Java Web Start. The rest of

  • PCR to read the variable-Urgent help required

    Dear Experts, I'm trying to read a variable in a pcr and tried many ways however NOT been successful so far hence seeking your help I have a WT( 5115) in infotype 15 and I would like the amount to transferred to a varibale and read it in the further

  • Playing music on I-phone or I-pod

    Is there any way to exclude songs from playing in the shuffle mode? For example if I want to exclude Christmas songs from playing in the shuffle mode can I uncheck the box next to the song in i-tunes when I sync my i-phone or i-pod?

  • SNAPSHOT --- UPDATE GENER$V

    Hi, S.O - Windows 2000 Server Oracle - 9.2.0 ORA-00600: código de erro interno, argumentos: [17281], [36], [0x23E4BE38], [], [], [], [], [] ORA-00036: número máximo de níveis SQL recursivos (50) excedido Thanks